Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Damian Hobson-Garcia | 1387 | 94.68% | 5 | 38.46% |
Jia-Ju Bai | 20 | 1.37% | 1 | 7.69% |
Alexandru Ardelean | 19 | 1.30% | 1 | 7.69% |
Rob Herring | 12 | 0.82% | 1 | 7.69% |
Jan Viktorin | 9 | 0.61% | 1 | 7.69% |
DaeSeok Youn | 9 | 0.61% | 1 | 7.69% |
Jingoo Han | 4 | 0.27% | 1 | 7.69% |
Sachin Kamat | 3 | 0.20% | 1 | 7.69% |
Thomas Gleixner | 2 | 0.14% | 1 | 7.69% |
Total | 1465 | 13 |
// SPDX-License-Identifier: GPL-2.0-only /* * drivers/uio/uio_dmem_genirq.c * * Userspace I/O platform driver with generic IRQ handling code. * * Copyright (C) 2012 Damian Hobson-Garcia * * Based on uio_pdrv_genirq.c by Magnus Damm */ #include <linux/platform_device.h> #include <linux/uio_driver.h> #include <linux/spinlock.h> #include <linux/bitops.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/platform_data/uio_dmem_genirq.h> #include <linux/stringify.h> #include <linux/pm_runtime.h> #include <linux/dma-mapping.h> #include <linux/slab.h> #include <linux/of.h> #include <linux/of_platform.h> #include <linux/of_address.h> #define DRIVER_NAME "uio_dmem_genirq" #define DMEM_MAP_ERROR (~0) struct uio_dmem_genirq_platdata { struct uio_info *uioinfo; spinlock_t lock; unsigned long flags; struct platform_device *pdev; unsigned int dmem_region_start; unsigned int num_dmem_regions; void *dmem_region_vaddr[MAX_UIO_MAPS]; struct mutex alloc_lock; unsigned int refcnt; }; static int uio_dmem_genirq_open(struct uio_info *info, struct inode *inode) { struct uio_dmem_genirq_platdata *priv = info->priv; struct uio_mem *uiomem; int ret = 0; int dmem_region = priv->dmem_region_start; uiomem = &priv->uioinfo->mem[priv->dmem_region_start]; mutex_lock(&priv->alloc_lock); while (!priv->refcnt && uiomem < &priv->uioinfo->mem[MAX_UIO_MAPS]) { void *addr; if (!uiomem->size) break; addr = dma_alloc_coherent(&priv->pdev->dev, uiomem->size, (dma_addr_t *)&uiomem->addr, GFP_KERNEL); if (!addr) { uiomem->addr = DMEM_MAP_ERROR; } priv->dmem_region_vaddr[dmem_region++] = addr; ++uiomem; } priv->refcnt++; mutex_unlock(&priv->alloc_lock); /* Wait until the Runtime PM code has woken up the device */ pm_runtime_get_sync(&priv->pdev->dev); return ret; } static int uio_dmem_genirq_release(struct uio_info *info, struct inode *inode) { struct uio_dmem_genirq_platdata *priv = info->priv; struct uio_mem *uiomem; int dmem_region = priv->dmem_region_start; /* Tell the Runtime PM code that the device has become idle */ pm_runtime_put_sync(&priv->pdev->dev); uiomem = &priv->uioinfo->mem[priv->dmem_region_start]; mutex_lock(&priv->alloc_lock); priv->refcnt--; while (!priv->refcnt && uiomem < &priv->uioinfo->mem[MAX_UIO_MAPS]) { if (!uiomem->size) break; if (priv->dmem_region_vaddr[dmem_region]) { dma_free_coherent(&priv->pdev->dev, uiomem->size, priv->dmem_region_vaddr[dmem_region], uiomem->addr); } uiomem->addr = DMEM_MAP_ERROR; ++dmem_region; ++uiomem; } mutex_unlock(&priv->alloc_lock); return 0; } static irqreturn_t uio_dmem_genirq_handler(int irq, struct uio_info *dev_info) { struct uio_dmem_genirq_platdata *priv = dev_info->priv; /* Just disable the interrupt in the interrupt controller, and * remember the state so we can allow user space to enable it later. */ if (!test_and_set_bit(0, &priv->flags)) disable_irq_nosync(irq); return IRQ_HANDLED; } static int uio_dmem_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on) { struct uio_dmem_genirq_platdata *priv = dev_info->priv; unsigned long flags; /* Allow user space to enable and disable the interrupt * in the interrupt controller, but keep track of the * state to prevent per-irq depth damage. * * Serialize this operation to support multiple tasks. */ spin_lock_irqsave(&priv->lock, flags); if (irq_on) { if (test_and_clear_bit(0, &priv->flags)) enable_irq(dev_info->irq); spin_unlock_irqrestore(&priv->lock, flags); } else { if (!test_and_set_bit(0, &priv->flags)) { spin_unlock_irqrestore(&priv->lock, flags); disable_irq(dev_info->irq); } } return 0; } static int uio_dmem_genirq_probe(struct platform_device *pdev) { struct uio_dmem_genirq_pdata *pdata = dev_get_platdata(&pdev->dev); struct uio_info *uioinfo = &pdata->uioinfo; struct uio_dmem_genirq_platdata *priv; struct uio_mem *uiomem; int ret = -EINVAL; int i; if (pdev->dev.of_node) { /* alloc uioinfo for one device */ uioinfo = kzalloc(sizeof(*uioinfo), GFP_KERNEL); if (!uioinfo) { ret = -ENOMEM; dev_err(&pdev->dev, "unable to kmalloc\n"); goto bad2; } uioinfo->name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%pOFn", pdev->dev.of_node); uioinfo->version = "devicetree"; } if (!uioinfo || !uioinfo->name || !uioinfo->version) { dev_err(&pdev->dev, "missing platform_data\n"); goto bad0; } if (uioinfo->handler || uioinfo->irqcontrol || uioinfo->irq_flags & IRQF_SHARED) { dev_err(&pdev->dev, "interrupt configuration error\n"); goto bad0; } priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) { ret = -ENOMEM; dev_err(&pdev->dev, "unable to kmalloc\n"); goto bad0; } dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); priv->uioinfo = uioinfo; spin_lock_init(&priv->lock); priv->flags = 0; /* interrupt is enabled to begin with */ priv->pdev = pdev; mutex_init(&priv->alloc_lock); if (!uioinfo->irq) { /* Multiple IRQs are not supported */ ret = platform_get_irq(pdev, 0); if (ret == -ENXIO && pdev->dev.of_node) ret = UIO_IRQ_NONE; else if (ret < 0) goto bad1; uioinfo->irq = ret; } uiomem = &uioinfo->mem[0]; for (i = 0; i < pdev->num_resources; ++i) { struct resource *r = &pdev->resource[i]; if (r->flags != IORESOURCE_MEM) continue; if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) { dev_warn(&pdev->dev, "device has more than " __stringify(MAX_UIO_MAPS) " I/O memory resources.\n"); break; } uiomem->memtype = UIO_MEM_PHYS; uiomem->addr = r->start; uiomem->size = resource_size(r); ++uiomem; } priv->dmem_region_start = uiomem - &uioinfo->mem[0]; priv->num_dmem_regions = pdata->num_dynamic_regions; for (i = 0; i < pdata->num_dynamic_regions; ++i) { if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) { dev_warn(&pdev->dev, "device has more than " __stringify(MAX_UIO_MAPS) " dynamic and fixed memory regions.\n"); break; } uiomem->memtype = UIO_MEM_PHYS; uiomem->addr = DMEM_MAP_ERROR; uiomem->size = pdata->dynamic_region_sizes[i]; ++uiomem; } while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) { uiomem->size = 0; ++uiomem; } /* This driver requires no hardware specific kernel code to handle * interrupts. Instead, the interrupt handler simply disables the * interrupt in the interrupt controller. User space is responsible * for performing hardware specific acknowledge and re-enabling of * the interrupt in the interrupt controller. * * Interrupt sharing is not supported. */ uioinfo->handler = uio_dmem_genirq_handler; uioinfo->irqcontrol = uio_dmem_genirq_irqcontrol; uioinfo->open = uio_dmem_genirq_open; uioinfo->release = uio_dmem_genirq_release; uioinfo->priv = priv; /* Enable Runtime PM for this device: * The device starts in suspended state to allow the hardware to be * turned off by default. The Runtime PM bus code should power on the * hardware and enable clocks at open(). */ pm_runtime_enable(&pdev->dev); ret = uio_register_device(&pdev->dev, priv->uioinfo); if (ret) { dev_err(&pdev->dev, "unable to register uio device\n"); pm_runtime_disable(&pdev->dev); goto bad1; } platform_set_drvdata(pdev, priv); return 0; bad1: kfree(priv); bad0: /* kfree uioinfo for OF */ if (pdev->dev.of_node) kfree(uioinfo); bad2: return ret; } static int uio_dmem_genirq_remove(struct platform_device *pdev) { struct uio_dmem_genirq_platdata *priv = platform_get_drvdata(pdev); uio_unregister_device(priv->uioinfo); pm_runtime_disable(&pdev->dev); priv->uioinfo->handler = NULL; priv->uioinfo->irqcontrol = NULL; /* kfree uioinfo for OF */ if (pdev->dev.of_node) kfree(priv->uioinfo); kfree(priv); return 0; } static int uio_dmem_genirq_runtime_nop(struct device *dev) { /* Runtime PM callback shared between ->runtime_suspend() * and ->runtime_resume(). Simply returns success. * * In this driver pm_runtime_get_sync() and pm_runtime_put_sync() * are used at open() and release() time. This allows the * Runtime PM code to turn off power to the device while the * device is unused, ie before open() and after release(). * * This Runtime PM callback does not need to save or restore * any registers since user space is responsbile for hardware * register reinitialization after open(). */ return 0; } static const struct dev_pm_ops uio_dmem_genirq_dev_pm_ops = { .runtime_suspend = uio_dmem_genirq_runtime_nop, .runtime_resume = uio_dmem_genirq_runtime_nop, }; #ifdef CONFIG_OF static const struct of_device_id uio_of_genirq_match[] = { { /* empty for now */ }, }; MODULE_DEVICE_TABLE(of, uio_of_genirq_match); #endif static struct platform_driver uio_dmem_genirq = { .probe = uio_dmem_genirq_probe, .remove = uio_dmem_genirq_remove, .driver = { .name = DRIVER_NAME, .pm = &uio_dmem_genirq_dev_pm_ops, .of_match_table = of_match_ptr(uio_of_genirq_match), }, }; module_platform_driver(uio_dmem_genirq); MODULE_AUTHOR("Damian Hobson-Garcia"); MODULE_DESCRIPTION("Userspace I/O platform driver with dynamic memory."); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:" DRIVER_NAME);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1