| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Olav Kongas | 2197 | 99.59% | 2 | 25.00% |
| Frank Seidel | 4 | 0.18% | 1 | 12.50% |
| Greg Kroah-Hartman | 2 | 0.09% | 2 | 25.00% |
| Lucas De Marchi | 1 | 0.05% | 1 | 12.50% |
| Pete Zaitcev | 1 | 0.05% | 1 | 12.50% |
| Arjan van de Ven | 1 | 0.05% | 1 | 12.50% |
| Total | 2206 | 8 |
/* SPDX-License-Identifier: GPL-2.0 */ /* * ISP116x register declarations and HCD data structures * * Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee> * Portions: * Copyright (C) 2004 Lothar Wassmann * Copyright (C) 2004 Psion Teklogix * Copyright (C) 2004 David Brownell */ /* us of 1ms frame */ #define MAX_LOAD_LIMIT 850 /* Full speed: max # of bytes to transfer for a single urb at a time must be < 1024 && must be multiple of 64. 832 allows transferring 4kiB within 5 frames. */ #define MAX_TRANSFER_SIZE_FULLSPEED 832 /* Low speed: there is no reason to schedule in very big chunks; often the requested long transfers are for string descriptors containing short strings. */ #define MAX_TRANSFER_SIZE_LOWSPEED 64 /* Bytetime (us), a rough indication of how much time it would take to transfer a byte of useful data over USB */ #define BYTE_TIME_FULLSPEED 1 #define BYTE_TIME_LOWSPEED 20 /* Buffer sizes */ #define ISP116x_BUF_SIZE 4096 #define ISP116x_ITL_BUFSIZE 0 #define ISP116x_ATL_BUFSIZE ((ISP116x_BUF_SIZE) - 2*(ISP116x_ITL_BUFSIZE)) #define ISP116x_WRITE_OFFSET 0x80 /*------------ ISP116x registers/bits ------------*/ #define HCREVISION 0x00 #define HCCONTROL 0x01 #define HCCONTROL_HCFS (3 << 6) /* host controller functional state */ #define HCCONTROL_USB_RESET (0 << 6) #define HCCONTROL_USB_RESUME (1 << 6) #define HCCONTROL_USB_OPER (2 << 6) #define HCCONTROL_USB_SUSPEND (3 << 6) #define HCCONTROL_RWC (1 << 9) /* remote wakeup connected */ #define HCCONTROL_RWE (1 << 10) /* remote wakeup enable */ #define HCCMDSTAT 0x02 #define HCCMDSTAT_HCR (1 << 0) /* host controller reset */ #define HCCMDSTAT_SOC (3 << 16) /* scheduling overrun count */ #define HCINTSTAT 0x03 #define HCINT_SO (1 << 0) /* scheduling overrun */ #define HCINT_WDH (1 << 1) /* writeback of done_head */ #define HCINT_SF (1 << 2) /* start frame */ #define HCINT_RD (1 << 3) /* resume detect */ #define HCINT_UE (1 << 4) /* unrecoverable error */ #define HCINT_FNO (1 << 5) /* frame number overflow */ #define HCINT_RHSC (1 << 6) /* root hub status change */ #define HCINT_OC (1 << 30) /* ownership change */ #define HCINT_MIE (1 << 31) /* master interrupt enable */ #define HCINTENB 0x04 #define HCINTDIS 0x05 #define HCFMINTVL 0x0d #define HCFMREM 0x0e #define HCFMNUM 0x0f #define HCLSTHRESH 0x11 #define HCRHDESCA 0x12 #define RH_A_NDP (0x3 << 0) /* # downstream ports */ #define RH_A_PSM (1 << 8) /* power switching mode */ #define RH_A_NPS (1 << 9) /* no power switching */ #define RH_A_DT (1 << 10) /* device type (mbz) */ #define RH_A_OCPM (1 << 11) /* overcurrent protection mode */ #define RH_A_NOCP (1 << 12) /* no overcurrent protection */ #define RH_A_POTPGT (0xff << 24) /* power on -> power good time */ #define HCRHDESCB 0x13 #define RH_B_DR (0xffff << 0) /* device removable flags */ #define RH_B_PPCM (0xffff << 16) /* port power control mask */ #define HCRHSTATUS 0x14 #define RH_HS_LPS (1 << 0) /* local power status */ #define RH_HS_OCI (1 << 1) /* over current indicator */ #define RH_HS_DRWE (1 << 15) /* device remote wakeup enable */ #define RH_HS_LPSC (1 << 16) /* local power status change */ #define RH_HS_OCIC (1 << 17) /* over current indicator change */ #define RH_HS_CRWE (1 << 31) /* clear remote wakeup enable */ #define HCRHPORT1 0x15 #define RH_PS_CCS (1 << 0) /* current connect status */ #define RH_PS_PES (1 << 1) /* port enable status */ #define RH_PS_PSS (1 << 2) /* port suspend status */ #define RH_PS_POCI (1 << 3) /* port over current indicator */ #define RH_PS_PRS (1 << 4) /* port reset status */ #define RH_PS_PPS (1 << 8) /* port power status */ #define RH_PS_LSDA (1 << 9) /* low speed device attached */ #define RH_PS_CSC (1 << 16) /* connect status change */ #define RH_PS_PESC (1 << 17) /* port enable status change */ #define RH_PS_PSSC (1 << 18) /* port suspend status change */ #define RH_PS_OCIC (1 << 19) /* over current indicator change */ #define RH_PS_PRSC (1 << 20) /* port reset status change */ #define HCRHPORT_CLRMASK (0x1f << 16) #define HCRHPORT2 0x16 #define HCHWCFG 0x20 #define HCHWCFG_15KRSEL (1 << 12) #define HCHWCFG_CLKNOTSTOP (1 << 11) #define HCHWCFG_ANALOG_OC (1 << 10) #define HCHWCFG_DACK_MODE (1 << 8) #define HCHWCFG_EOT_POL (1 << 7) #define HCHWCFG_DACK_POL (1 << 6) #define HCHWCFG_DREQ_POL (1 << 5) #define HCHWCFG_DBWIDTH_MASK (0x03 << 3) #define HCHWCFG_DBWIDTH(n) (((n) << 3) & HCHWCFG_DBWIDTH_MASK) #define HCHWCFG_INT_POL (1 << 2) #define HCHWCFG_INT_TRIGGER (1 << 1) #define HCHWCFG_INT_ENABLE (1 << 0) #define HCDMACFG 0x21 #define HCDMACFG_BURST_LEN_MASK (0x03 << 5) #define HCDMACFG_BURST_LEN(n) (((n) << 5) & HCDMACFG_BURST_LEN_MASK) #define HCDMACFG_BURST_LEN_1 HCDMACFG_BURST_LEN(0) #define HCDMACFG_BURST_LEN_4 HCDMACFG_BURST_LEN(1) #define HCDMACFG_BURST_LEN_8 HCDMACFG_BURST_LEN(2) #define HCDMACFG_DMA_ENABLE (1 << 4) #define HCDMACFG_BUF_TYPE_MASK (0x07 << 1) #define HCDMACFG_CTR_SEL (1 << 2) #define HCDMACFG_ITLATL_SEL (1 << 1) #define HCDMACFG_DMA_RW_SELECT (1 << 0) #define HCXFERCTR 0x22 #define HCuPINT 0x24 #define HCuPINT_SOF (1 << 0) #define HCuPINT_ATL (1 << 1) #define HCuPINT_AIIEOT (1 << 2) #define HCuPINT_OPR (1 << 4) #define HCuPINT_SUSP (1 << 5) #define HCuPINT_CLKRDY (1 << 6) #define HCuPINTENB 0x25 #define HCCHIPID 0x27 #define HCCHIPID_MASK 0xff00 #define HCCHIPID_MAGIC 0x6100 #define HCSCRATCH 0x28 #define HCSWRES 0x29 #define HCSWRES_MAGIC 0x00f6 #define HCITLBUFLEN 0x2a #define HCATLBUFLEN 0x2b #define HCBUFSTAT 0x2c #define HCBUFSTAT_ITL0_FULL (1 << 0) #define HCBUFSTAT_ITL1_FULL (1 << 1) #define HCBUFSTAT_ATL_FULL (1 << 2) #define HCBUFSTAT_ITL0_DONE (1 << 3) #define HCBUFSTAT_ITL1_DONE (1 << 4) #define HCBUFSTAT_ATL_DONE (1 << 5) #define HCRDITL0LEN 0x2d #define HCRDITL1LEN 0x2e #define HCITLPORT 0x40 #define HCATLPORT 0x41 /* Philips transfer descriptor */ struct ptd { u16 count; #define PTD_COUNT_MSK (0x3ff << 0) #define PTD_TOGGLE_MSK (1 << 10) #define PTD_ACTIVE_MSK (1 << 11) #define PTD_CC_MSK (0xf << 12) u16 mps; #define PTD_MPS_MSK (0x3ff << 0) #define PTD_SPD_MSK (1 << 10) #define PTD_LAST_MSK (1 << 11) #define PTD_EP_MSK (0xf << 12) u16 len; #define PTD_LEN_MSK (0x3ff << 0) #define PTD_DIR_MSK (3 << 10) #define PTD_DIR_SETUP (0) #define PTD_DIR_OUT (1) #define PTD_DIR_IN (2) #define PTD_B5_5_MSK (1 << 13) u16 faddr; #define PTD_FA_MSK (0x7f << 0) #define PTD_FMT_MSK (1 << 7) } __attribute__ ((packed, aligned(2))); /* PTD accessor macros. */ #define PTD_GET_COUNT(p) (((p)->count & PTD_COUNT_MSK) >> 0) #define PTD_COUNT(v) (((v) << 0) & PTD_COUNT_MSK) #define PTD_GET_TOGGLE(p) (((p)->count & PTD_TOGGLE_MSK) >> 10) #define PTD_TOGGLE(v) (((v) << 10) & PTD_TOGGLE_MSK) #define PTD_GET_ACTIVE(p) (((p)->count & PTD_ACTIVE_MSK) >> 11) #define PTD_ACTIVE(v) (((v) << 11) & PTD_ACTIVE_MSK) #define PTD_GET_CC(p) (((p)->count & PTD_CC_MSK) >> 12) #define PTD_CC(v) (((v) << 12) & PTD_CC_MSK) #define PTD_GET_MPS(p) (((p)->mps & PTD_MPS_MSK) >> 0) #define PTD_MPS(v) (((v) << 0) & PTD_MPS_MSK) #define PTD_GET_SPD(p) (((p)->mps & PTD_SPD_MSK) >> 10) #define PTD_SPD(v) (((v) << 10) & PTD_SPD_MSK) #define PTD_GET_LAST(p) (((p)->mps & PTD_LAST_MSK) >> 11) #define PTD_LAST(v) (((v) << 11) & PTD_LAST_MSK) #define PTD_GET_EP(p) (((p)->mps & PTD_EP_MSK) >> 12) #define PTD_EP(v) (((v) << 12) & PTD_EP_MSK) #define PTD_GET_LEN(p) (((p)->len & PTD_LEN_MSK) >> 0) #define PTD_LEN(v) (((v) << 0) & PTD_LEN_MSK) #define PTD_GET_DIR(p) (((p)->len & PTD_DIR_MSK) >> 10) #define PTD_DIR(v) (((v) << 10) & PTD_DIR_MSK) #define PTD_GET_B5_5(p) (((p)->len & PTD_B5_5_MSK) >> 13) #define PTD_B5_5(v) (((v) << 13) & PTD_B5_5_MSK) #define PTD_GET_FA(p) (((p)->faddr & PTD_FA_MSK) >> 0) #define PTD_FA(v) (((v) << 0) & PTD_FA_MSK) #define PTD_GET_FMT(p) (((p)->faddr & PTD_FMT_MSK) >> 7) #define PTD_FMT(v) (((v) << 7) & PTD_FMT_MSK) /* Hardware transfer status codes -- CC from ptd->count */ #define TD_CC_NOERROR 0x00 #define TD_CC_CRC 0x01 #define TD_CC_BITSTUFFING 0x02 #define TD_CC_DATATOGGLEM 0x03 #define TD_CC_STALL 0x04 #define TD_DEVNOTRESP 0x05 #define TD_PIDCHECKFAIL 0x06 #define TD_UNEXPECTEDPID 0x07 #define TD_DATAOVERRUN 0x08 #define TD_DATAUNDERRUN 0x09 /* 0x0A, 0x0B reserved for hardware */ #define TD_BUFFEROVERRUN 0x0C #define TD_BUFFERUNDERRUN 0x0D /* 0x0E, 0x0F reserved for HCD */ #define TD_NOTACCESSED 0x0F /* map PTD status codes (CC) to errno values */ static const int cc_to_error[16] = { /* No Error */ 0, /* CRC Error */ -EILSEQ, /* Bit Stuff */ -EPROTO, /* Data Togg */ -EILSEQ, /* Stall */ -EPIPE, /* DevNotResp */ -ETIME, /* PIDCheck */ -EPROTO, /* UnExpPID */ -EPROTO, /* DataOver */ -EOVERFLOW, /* DataUnder */ -EREMOTEIO, /* (for hw) */ -EIO, /* (for hw) */ -EIO, /* BufferOver */ -ECOMM, /* BuffUnder */ -ENOSR, /* (for HCD) */ -EALREADY, /* (for HCD) */ -EALREADY }; /*--------------------------------------------------------------*/ #define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */ #define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE) struct isp116x { spinlock_t lock; void __iomem *addr_reg; void __iomem *data_reg; struct isp116x_platform_data *board; struct dentry *dentry; unsigned long stat1, stat2, stat4, stat8, stat16; /* HC registers */ u32 intenb; /* "OHCI" interrupts */ u16 irqenb; /* uP interrupts */ /* Root hub registers */ u32 rhdesca; u32 rhdescb; u32 rhstatus; /* async schedule: control, bulk */ struct list_head async; /* periodic schedule: int */ u16 load[PERIODIC_SIZE]; struct isp116x_ep *periodic[PERIODIC_SIZE]; unsigned periodic_count; u16 fmindex; /* Schedule for the current frame */ struct isp116x_ep *atl_active; int atl_buflen; int atl_bufshrt; int atl_last_dir; atomic_t atl_finishing; }; static inline struct isp116x *hcd_to_isp116x(struct usb_hcd *hcd) { return (struct isp116x *)(hcd->hcd_priv); } static inline struct usb_hcd *isp116x_to_hcd(struct isp116x *isp116x) { return container_of((void *)isp116x, struct usb_hcd, hcd_priv); } struct isp116x_ep { struct usb_host_endpoint *hep; struct usb_device *udev; struct ptd ptd; u8 maxpacket; u8 epnum; u8 nextpid; u16 error_count; u16 length; /* of current packet */ unsigned char *data; /* to databuf */ /* queue of active EP's (the ones scheduled for the current frame) */ struct isp116x_ep *active; /* periodic schedule */ u16 period; u16 branch; u16 load; struct isp116x_ep *next; /* async schedule */ struct list_head schedule; }; /*-------------------------------------------------------------------------*/ #define DBG(stuff...) pr_debug("116x: " stuff) #ifdef VERBOSE # define VDBG DBG #else # define VDBG(stuff...) do{}while(0) #endif #define ERR(stuff...) printk(KERN_ERR "116x: " stuff) #define WARNING(stuff...) printk(KERN_WARNING "116x: " stuff) #define INFO(stuff...) printk(KERN_INFO "116x: " stuff) /* ------------------------------------------------- */ #if defined(USE_PLATFORM_DELAY) #if defined(USE_NDELAY) #error USE_PLATFORM_DELAY and USE_NDELAY simultaneously defined. #endif #define isp116x_delay(h,d) (h)->board->delay( \ isp116x_to_hcd(h)->self.controller,d) #define isp116x_check_platform_delay(h) ((h)->board->delay == NULL) #elif defined(USE_NDELAY) #define isp116x_delay(h,d) ndelay(d) #define isp116x_check_platform_delay(h) 0 #else #define isp116x_delay(h,d) do{}while(0) #define isp116x_check_platform_delay(h) 0 #endif static inline void isp116x_write_addr(struct isp116x *isp116x, unsigned reg) { writew(reg & 0xff, isp116x->addr_reg); isp116x_delay(isp116x, 300); } static inline void isp116x_write_data16(struct isp116x *isp116x, u16 val) { writew(val, isp116x->data_reg); isp116x_delay(isp116x, 150); } static inline void isp116x_raw_write_data16(struct isp116x *isp116x, u16 val) { __raw_writew(val, isp116x->data_reg); isp116x_delay(isp116x, 150); } static inline u16 isp116x_read_data16(struct isp116x *isp116x) { u16 val; val = readw(isp116x->data_reg); isp116x_delay(isp116x, 150); return val; } static inline u16 isp116x_raw_read_data16(struct isp116x *isp116x) { u16 val; val = __raw_readw(isp116x->data_reg); isp116x_delay(isp116x, 150); return val; } static inline void isp116x_write_data32(struct isp116x *isp116x, u32 val) { writew(val & 0xffff, isp116x->data_reg); isp116x_delay(isp116x, 150); writew(val >> 16, isp116x->data_reg); isp116x_delay(isp116x, 150); } static inline u32 isp116x_read_data32(struct isp116x *isp116x) { u32 val; val = (u32) readw(isp116x->data_reg); isp116x_delay(isp116x, 150); val |= ((u32) readw(isp116x->data_reg)) << 16; isp116x_delay(isp116x, 150); return val; } /* Let's keep register access functions out of line. Hint: we wait at least 150 ns at every access. */ static u16 isp116x_read_reg16(struct isp116x *isp116x, unsigned reg) { isp116x_write_addr(isp116x, reg); return isp116x_read_data16(isp116x); } static u32 isp116x_read_reg32(struct isp116x *isp116x, unsigned reg) { isp116x_write_addr(isp116x, reg); return isp116x_read_data32(isp116x); } static void isp116x_write_reg16(struct isp116x *isp116x, unsigned reg, unsigned val) { isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET); isp116x_write_data16(isp116x, (u16) (val & 0xffff)); } static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg, unsigned val) { isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET); isp116x_write_data32(isp116x, (u32) val); } #define isp116x_show_reg_log(d,r,s) { \ if ((r) < 0x20) { \ DBG("%-12s[%02x]: %08x\n", #r, \ r, isp116x_read_reg32(d, r)); \ } else { \ DBG("%-12s[%02x]: %04x\n", #r, \ r, isp116x_read_reg16(d, r)); \ } \ } #define isp116x_show_reg_seq(d,r,s) { \ if ((r) < 0x20) { \ seq_printf(s, "%-12s[%02x]: %08x\n", #r, \ r, isp116x_read_reg32(d, r)); \ } else { \ seq_printf(s, "%-12s[%02x]: %04x\n", #r, \ r, isp116x_read_reg16(d, r)); \ } \ } #define isp116x_show_regs(d,type,s) { \ isp116x_show_reg_##type(d, HCREVISION, s); \ isp116x_show_reg_##type(d, HCCONTROL, s); \ isp116x_show_reg_##type(d, HCCMDSTAT, s); \ isp116x_show_reg_##type(d, HCINTSTAT, s); \ isp116x_show_reg_##type(d, HCINTENB, s); \ isp116x_show_reg_##type(d, HCFMINTVL, s); \ isp116x_show_reg_##type(d, HCFMREM, s); \ isp116x_show_reg_##type(d, HCFMNUM, s); \ isp116x_show_reg_##type(d, HCLSTHRESH, s); \ isp116x_show_reg_##type(d, HCRHDESCA, s); \ isp116x_show_reg_##type(d, HCRHDESCB, s); \ isp116x_show_reg_##type(d, HCRHSTATUS, s); \ isp116x_show_reg_##type(d, HCRHPORT1, s); \ isp116x_show_reg_##type(d, HCRHPORT2, s); \ isp116x_show_reg_##type(d, HCHWCFG, s); \ isp116x_show_reg_##type(d, HCDMACFG, s); \ isp116x_show_reg_##type(d, HCXFERCTR, s); \ isp116x_show_reg_##type(d, HCuPINT, s); \ isp116x_show_reg_##type(d, HCuPINTENB, s); \ isp116x_show_reg_##type(d, HCCHIPID, s); \ isp116x_show_reg_##type(d, HCSCRATCH, s); \ isp116x_show_reg_##type(d, HCITLBUFLEN, s); \ isp116x_show_reg_##type(d, HCATLBUFLEN, s); \ isp116x_show_reg_##type(d, HCBUFSTAT, s); \ isp116x_show_reg_##type(d, HCRDITL0LEN, s); \ isp116x_show_reg_##type(d, HCRDITL1LEN, s); \ } /* Dump registers for debugfs. */ static inline void isp116x_show_regs_seq(struct isp116x *isp116x, struct seq_file *s) { isp116x_show_regs(isp116x, seq, s); } /* Dump registers to syslog. */ static inline void isp116x_show_regs_log(struct isp116x *isp116x) { isp116x_show_regs(isp116x, log, NULL); } #if defined(URB_TRACE) #define PIPETYPE(pipe) ({ char *__s; \ if (usb_pipecontrol(pipe)) __s = "ctrl"; \ else if (usb_pipeint(pipe)) __s = "int"; \ else if (usb_pipebulk(pipe)) __s = "bulk"; \ else __s = "iso"; \ __s;}) #define PIPEDIR(pipe) ({ usb_pipein(pipe) ? "in" : "out"; }) #define URB_NOTSHORT(urb) ({ (urb)->transfer_flags & URB_SHORT_NOT_OK ? \ "short_not_ok" : ""; }) /* print debug info about the URB */ static void urb_dbg(struct urb *urb, char *msg) { unsigned int pipe; if (!urb) { DBG("%s: zero urb\n", msg); return; } pipe = urb->pipe; DBG("%s: FA %d ep%d%s %s: len %d/%d %s\n", msg, usb_pipedevice(pipe), usb_pipeendpoint(pipe), PIPEDIR(pipe), PIPETYPE(pipe), urb->transfer_buffer_length, urb->actual_length, URB_NOTSHORT(urb)); } #else #define urb_dbg(urb,msg) do{}while(0) #endif /* ! defined(URB_TRACE) */ #if defined(PTD_TRACE) #define PTD_DIR_STR(ptd) ({char __c; \ switch(PTD_GET_DIR(ptd)){ \ case 0: __c = 's'; break; \ case 1: __c = 'o'; break; \ default: __c = 'i'; break; \ }; __c;}) /* Dump PTD info. The code documents the format perfectly, right :) */ static inline void dump_ptd(struct ptd *ptd) { printk(KERN_WARNING "td: %x %d%c%d %d,%d,%d %x %x%x%x\n", PTD_GET_CC(ptd), PTD_GET_FA(ptd), PTD_DIR_STR(ptd), PTD_GET_EP(ptd), PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd), PTD_GET_TOGGLE(ptd), PTD_GET_ACTIVE(ptd), PTD_GET_SPD(ptd), PTD_GET_LAST(ptd)); } static inline void dump_ptd_out_data(struct ptd *ptd, u8 * buf) { int k; if (PTD_GET_DIR(ptd) != PTD_DIR_IN && PTD_GET_LEN(ptd)) { printk(KERN_WARNING "-> "); for (k = 0; k < PTD_GET_LEN(ptd); ++k) printk("%02x ", ((u8 *) buf)[k]); printk("\n"); } } static inline void dump_ptd_in_data(struct ptd *ptd, u8 * buf) { int k; if (PTD_GET_DIR(ptd) == PTD_DIR_IN && PTD_GET_COUNT(ptd)) { printk(KERN_WARNING "<- "); for (k = 0; k < PTD_GET_COUNT(ptd); ++k) printk("%02x ", ((u8 *) buf)[k]); printk("\n"); } if (PTD_GET_LAST(ptd)) printk(KERN_WARNING "-\n"); } #else #define dump_ptd(ptd) do{}while(0) #define dump_ptd_in_data(ptd,buf) do{}while(0) #define dump_ptd_out_data(ptd,buf) do{}while(0) #endif /* ! defined(PTD_TRACE) */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1