Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Mika Westerberg | 2357 | 98.17% | 4 | 33.33% |
Wei Yongjun | 24 | 1.00% | 2 | 16.67% |
Guenter Roeck | 10 | 0.42% | 1 | 8.33% |
Wolfram Sang | 4 | 0.17% | 1 | 8.33% |
Thomas Gleixner | 2 | 0.08% | 1 | 8.33% |
Takashi Iwai | 2 | 0.08% | 1 | 8.33% |
Geert Uytterhoeven | 1 | 0.04% | 1 | 8.33% |
Bryan Tan | 1 | 0.04% | 1 | 8.33% |
Total | 2401 | 12 |
// SPDX-License-Identifier: GPL-2.0-only /* * ACPI Hardware Watchdog (WDAT) driver. * * Copyright (C) 2016, Intel Corporation * Author: Mika Westerberg <mika.westerberg@linux.intel.com> */ #include <linux/acpi.h> #include <linux/ioport.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/watchdog.h> #define MAX_WDAT_ACTIONS ACPI_WDAT_ACTION_RESERVED /** * struct wdat_instruction - Single ACPI WDAT instruction * @entry: Copy of the ACPI table instruction * @reg: Register the instruction is accessing * @node: Next instruction in action sequence */ struct wdat_instruction { struct acpi_wdat_entry entry; void __iomem *reg; struct list_head node; }; /** * struct wdat_wdt - ACPI WDAT watchdog device * @pdev: Parent platform device * @wdd: Watchdog core device * @period: How long is one watchdog period in ms * @stopped_in_sleep: Is this watchdog stopped by the firmware in S1-S5 * @stopped: Was the watchdog stopped by the driver in suspend * @actions: An array of instruction lists indexed by an action number from * the WDAT table. There can be %NULL entries for not implemented * actions. */ struct wdat_wdt { struct platform_device *pdev; struct watchdog_device wdd; unsigned int period; bool stopped_in_sleep; bool stopped; struct list_head *instructions[MAX_WDAT_ACTIONS]; }; #define to_wdat_wdt(wdd) container_of(wdd, struct wdat_wdt, wdd) static bool nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); #define WDAT_DEFAULT_TIMEOUT 30 static int timeout = WDAT_DEFAULT_TIMEOUT; module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default=" __MODULE_STRING(WDAT_DEFAULT_TIMEOUT) ")"); static int wdat_wdt_read(struct wdat_wdt *wdat, const struct wdat_instruction *instr, u32 *value) { const struct acpi_generic_address *gas = &instr->entry.register_region; switch (gas->access_width) { case 1: *value = ioread8(instr->reg); break; case 2: *value = ioread16(instr->reg); break; case 3: *value = ioread32(instr->reg); break; default: return -EINVAL; } dev_dbg(&wdat->pdev->dev, "Read %#x from 0x%08llx\n", *value, gas->address); return 0; } static int wdat_wdt_write(struct wdat_wdt *wdat, const struct wdat_instruction *instr, u32 value) { const struct acpi_generic_address *gas = &instr->entry.register_region; switch (gas->access_width) { case 1: iowrite8((u8)value, instr->reg); break; case 2: iowrite16((u16)value, instr->reg); break; case 3: iowrite32(value, instr->reg); break; default: return -EINVAL; } dev_dbg(&wdat->pdev->dev, "Wrote %#x to 0x%08llx\n", value, gas->address); return 0; } static int wdat_wdt_run_action(struct wdat_wdt *wdat, unsigned int action, u32 param, u32 *retval) { struct wdat_instruction *instr; if (action >= ARRAY_SIZE(wdat->instructions)) return -EINVAL; if (!wdat->instructions[action]) return -EOPNOTSUPP; dev_dbg(&wdat->pdev->dev, "Running action %#x\n", action); /* Run each instruction sequentially */ list_for_each_entry(instr, wdat->instructions[action], node) { const struct acpi_wdat_entry *entry = &instr->entry; const struct acpi_generic_address *gas; u32 flags, value, mask, x, y; bool preserve; int ret; gas = &entry->register_region; preserve = entry->instruction & ACPI_WDAT_PRESERVE_REGISTER; flags = entry->instruction & ~ACPI_WDAT_PRESERVE_REGISTER; value = entry->value; mask = entry->mask; switch (flags) { case ACPI_WDAT_READ_VALUE: ret = wdat_wdt_read(wdat, instr, &x); if (ret) return ret; x >>= gas->bit_offset; x &= mask; if (retval) *retval = x == value; break; case ACPI_WDAT_READ_COUNTDOWN: ret = wdat_wdt_read(wdat, instr, &x); if (ret) return ret; x >>= gas->bit_offset; x &= mask; if (retval) *retval = x; break; case ACPI_WDAT_WRITE_VALUE: x = value & mask; x <<= gas->bit_offset; if (preserve) { ret = wdat_wdt_read(wdat, instr, &y); if (ret) return ret; y = y & ~(mask << gas->bit_offset); x |= y; } ret = wdat_wdt_write(wdat, instr, x); if (ret) return ret; break; case ACPI_WDAT_WRITE_COUNTDOWN: x = param; x &= mask; x <<= gas->bit_offset; if (preserve) { ret = wdat_wdt_read(wdat, instr, &y); if (ret) return ret; y = y & ~(mask << gas->bit_offset); x |= y; } ret = wdat_wdt_write(wdat, instr, x); if (ret) return ret; break; default: dev_err(&wdat->pdev->dev, "Unknown instruction: %u\n", flags); return -EINVAL; } } return 0; } static int wdat_wdt_enable_reboot(struct wdat_wdt *wdat) { int ret; /* * WDAT specification says that the watchdog is required to reboot * the system when it fires. However, it also states that it is * recommeded to make it configurable through hardware register. We * enable reboot now if it is configurable, just in case. */ ret = wdat_wdt_run_action(wdat, ACPI_WDAT_SET_REBOOT, 0, NULL); if (ret && ret != -EOPNOTSUPP) { dev_err(&wdat->pdev->dev, "Failed to enable reboot when watchdog triggers\n"); return ret; } return 0; } static void wdat_wdt_boot_status(struct wdat_wdt *wdat) { u32 boot_status = 0; int ret; ret = wdat_wdt_run_action(wdat, ACPI_WDAT_GET_STATUS, 0, &boot_status); if (ret && ret != -EOPNOTSUPP) { dev_err(&wdat->pdev->dev, "Failed to read boot status\n"); return; } if (boot_status) wdat->wdd.bootstatus = WDIOF_CARDRESET; /* Clear the boot status in case BIOS did not do it */ ret = wdat_wdt_run_action(wdat, ACPI_WDAT_SET_STATUS, 0, NULL); if (ret && ret != -EOPNOTSUPP) dev_err(&wdat->pdev->dev, "Failed to clear boot status\n"); } static void wdat_wdt_set_running(struct wdat_wdt *wdat) { u32 running = 0; int ret; ret = wdat_wdt_run_action(wdat, ACPI_WDAT_GET_RUNNING_STATE, 0, &running); if (ret && ret != -EOPNOTSUPP) dev_err(&wdat->pdev->dev, "Failed to read running state\n"); if (running) set_bit(WDOG_HW_RUNNING, &wdat->wdd.status); } static int wdat_wdt_start(struct watchdog_device *wdd) { return wdat_wdt_run_action(to_wdat_wdt(wdd), ACPI_WDAT_SET_RUNNING_STATE, 0, NULL); } static int wdat_wdt_stop(struct watchdog_device *wdd) { return wdat_wdt_run_action(to_wdat_wdt(wdd), ACPI_WDAT_SET_STOPPED_STATE, 0, NULL); } static int wdat_wdt_ping(struct watchdog_device *wdd) { return wdat_wdt_run_action(to_wdat_wdt(wdd), ACPI_WDAT_RESET, 0, NULL); } static int wdat_wdt_set_timeout(struct watchdog_device *wdd, unsigned int timeout) { struct wdat_wdt *wdat = to_wdat_wdt(wdd); unsigned int periods; int ret; periods = timeout * 1000 / wdat->period; ret = wdat_wdt_run_action(wdat, ACPI_WDAT_SET_COUNTDOWN, periods, NULL); if (!ret) wdd->timeout = timeout; return ret; } static unsigned int wdat_wdt_get_timeleft(struct watchdog_device *wdd) { struct wdat_wdt *wdat = to_wdat_wdt(wdd); u32 periods = 0; wdat_wdt_run_action(wdat, ACPI_WDAT_GET_CURRENT_COUNTDOWN, 0, &periods); return periods * wdat->period / 1000; } static const struct watchdog_info wdat_wdt_info = { .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, .firmware_version = 0, .identity = "wdat_wdt", }; static const struct watchdog_ops wdat_wdt_ops = { .owner = THIS_MODULE, .start = wdat_wdt_start, .stop = wdat_wdt_stop, .ping = wdat_wdt_ping, .set_timeout = wdat_wdt_set_timeout, .get_timeleft = wdat_wdt_get_timeleft, }; static int wdat_wdt_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; const struct acpi_wdat_entry *entries; const struct acpi_table_wdat *tbl; struct wdat_wdt *wdat; struct resource *res; void __iomem **regs; acpi_status status; int i, ret; status = acpi_get_table(ACPI_SIG_WDAT, 0, (struct acpi_table_header **)&tbl); if (ACPI_FAILURE(status)) return -ENODEV; wdat = devm_kzalloc(dev, sizeof(*wdat), GFP_KERNEL); if (!wdat) return -ENOMEM; regs = devm_kcalloc(dev, pdev->num_resources, sizeof(*regs), GFP_KERNEL); if (!regs) return -ENOMEM; /* WDAT specification wants to have >= 1ms period */ if (tbl->timer_period < 1) return -EINVAL; if (tbl->min_count > tbl->max_count) return -EINVAL; wdat->period = tbl->timer_period; wdat->wdd.min_hw_heartbeat_ms = wdat->period * tbl->min_count; wdat->wdd.max_hw_heartbeat_ms = wdat->period * tbl->max_count; wdat->stopped_in_sleep = tbl->flags & ACPI_WDAT_STOPPED; wdat->wdd.info = &wdat_wdt_info; wdat->wdd.ops = &wdat_wdt_ops; wdat->pdev = pdev; /* Request and map all resources */ for (i = 0; i < pdev->num_resources; i++) { void __iomem *reg; res = &pdev->resource[i]; if (resource_type(res) == IORESOURCE_MEM) { reg = devm_ioremap_resource(dev, res); if (IS_ERR(reg)) return PTR_ERR(reg); } else if (resource_type(res) == IORESOURCE_IO) { reg = devm_ioport_map(dev, res->start, 1); if (!reg) return -ENOMEM; } else { dev_err(dev, "Unsupported resource\n"); return -EINVAL; } regs[i] = reg; } entries = (struct acpi_wdat_entry *)(tbl + 1); for (i = 0; i < tbl->entries; i++) { const struct acpi_generic_address *gas; struct wdat_instruction *instr; struct list_head *instructions; unsigned int action; struct resource r; int j; action = entries[i].action; if (action >= MAX_WDAT_ACTIONS) { dev_dbg(dev, "Skipping unknown action: %u\n", action); continue; } instr = devm_kzalloc(dev, sizeof(*instr), GFP_KERNEL); if (!instr) return -ENOMEM; INIT_LIST_HEAD(&instr->node); instr->entry = entries[i]; gas = &entries[i].register_region; memset(&r, 0, sizeof(r)); r.start = gas->address; r.end = r.start + ACPI_ACCESS_BYTE_WIDTH(gas->access_width) - 1; if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { r.flags = IORESOURCE_MEM; } else if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_IO) { r.flags = IORESOURCE_IO; } else { dev_dbg(dev, "Unsupported address space: %d\n", gas->space_id); continue; } /* Find the matching resource */ for (j = 0; j < pdev->num_resources; j++) { res = &pdev->resource[j]; if (resource_contains(res, &r)) { instr->reg = regs[j] + r.start - res->start; break; } } if (!instr->reg) { dev_err(dev, "I/O resource not found\n"); return -EINVAL; } instructions = wdat->instructions[action]; if (!instructions) { instructions = devm_kzalloc(dev, sizeof(*instructions), GFP_KERNEL); if (!instructions) return -ENOMEM; INIT_LIST_HEAD(instructions); wdat->instructions[action] = instructions; } list_add_tail(&instr->node, instructions); } wdat_wdt_boot_status(wdat); wdat_wdt_set_running(wdat); ret = wdat_wdt_enable_reboot(wdat); if (ret) return ret; platform_set_drvdata(pdev, wdat); /* * Set initial timeout so that userspace has time to configure the * watchdog properly after it has opened the device. In some cases * the BIOS default is too short and causes immediate reboot. */ if (timeout * 1000 < wdat->wdd.min_hw_heartbeat_ms || timeout * 1000 > wdat->wdd.max_hw_heartbeat_ms) { dev_warn(dev, "Invalid timeout %d given, using %d\n", timeout, WDAT_DEFAULT_TIMEOUT); timeout = WDAT_DEFAULT_TIMEOUT; } ret = wdat_wdt_set_timeout(&wdat->wdd, timeout); if (ret) return ret; watchdog_set_nowayout(&wdat->wdd, nowayout); return devm_watchdog_register_device(dev, &wdat->wdd); } #ifdef CONFIG_PM_SLEEP static int wdat_wdt_suspend_noirq(struct device *dev) { struct wdat_wdt *wdat = dev_get_drvdata(dev); int ret; if (!watchdog_active(&wdat->wdd)) return 0; /* * We need to stop the watchdog if firmare is not doing it or if we * are going suspend to idle (where firmware is not involved). If * firmware is stopping the watchdog we kick it here one more time * to give it some time. */ wdat->stopped = false; if (acpi_target_system_state() == ACPI_STATE_S0 || !wdat->stopped_in_sleep) { ret = wdat_wdt_stop(&wdat->wdd); if (!ret) wdat->stopped = true; } else { ret = wdat_wdt_ping(&wdat->wdd); } return ret; } static int wdat_wdt_resume_noirq(struct device *dev) { struct wdat_wdt *wdat = dev_get_drvdata(dev); int ret; if (!watchdog_active(&wdat->wdd)) return 0; if (!wdat->stopped) { /* * Looks like the boot firmware reinitializes the watchdog * before it hands off to the OS on resume from sleep so we * stop and reprogram the watchdog here. */ ret = wdat_wdt_stop(&wdat->wdd); if (ret) return ret; ret = wdat_wdt_set_timeout(&wdat->wdd, wdat->wdd.timeout); if (ret) return ret; ret = wdat_wdt_enable_reboot(wdat); if (ret) return ret; ret = wdat_wdt_ping(&wdat->wdd); if (ret) return ret; } return wdat_wdt_start(&wdat->wdd); } #endif static const struct dev_pm_ops wdat_wdt_pm_ops = { SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(wdat_wdt_suspend_noirq, wdat_wdt_resume_noirq) }; static struct platform_driver wdat_wdt_driver = { .probe = wdat_wdt_probe, .driver = { .name = "wdat_wdt", .pm = &wdat_wdt_pm_ops, }, }; module_platform_driver(wdat_wdt_driver); MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>"); MODULE_DESCRIPTION("ACPI Hardware Watchdog (WDAT) driver"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:wdat_wdt");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1