Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Hans de Goede | 296 | 40.60% | 3 | 15.79% |
Bin Gao | 219 | 30.04% | 2 | 10.53% |
Andy Shevchenko | 123 | 16.87% | 4 | 21.05% |
Rahul Tanwar | 32 | 4.39% | 1 | 5.26% |
Thomas Gleixner | 24 | 3.29% | 2 | 10.53% |
Len Brown | 19 | 2.61% | 3 | 15.79% |
Peter Zijlstra | 8 | 1.10% | 1 | 5.26% |
H. Peter Anvin | 5 | 0.69% | 1 | 5.26% |
Daniel Drake | 2 | 0.27% | 1 | 5.26% |
Chen Yu | 1 | 0.14% | 1 | 5.26% |
Total | 729 | 19 |
// SPDX-License-Identifier: GPL-2.0 /* * TSC frequency enumeration via MSR * * Copyright (C) 2013, 2018 Intel Corporation * Author: Bin Gao <bin.gao@intel.com> */ #include <linux/kernel.h> #include <asm/apic.h> #include <asm/cpu_device_id.h> #include <asm/intel-family.h> #include <asm/msr.h> #include <asm/param.h> #include <asm/tsc.h> #define MAX_NUM_FREQS 16 /* 4 bits to select the frequency */ /* * The frequency numbers in the SDM are e.g. 83.3 MHz, which does not contain a * lot of accuracy which leads to clock drift. As far as we know Bay Trail SoCs * use a 25 MHz crystal and Cherry Trail uses a 19.2 MHz crystal, the crystal * is the source clk for a root PLL which outputs 1600 and 100 MHz. It is * unclear if the root PLL outputs are used directly by the CPU clock PLL or * if there is another PLL in between. * This does not matter though, we can model the chain of PLLs as a single PLL * with a quotient equal to the quotients of all PLLs in the chain multiplied. * So we can create a simplified model of the CPU clock setup using a reference * clock of 100 MHz plus a quotient which gets us as close to the frequency * from the SDM as possible. * For the 83.3 MHz example from above this would give us 100 MHz * 5 / 6 = * 83 and 1/3 MHz, which matches exactly what has been measured on actual hw. */ #define TSC_REFERENCE_KHZ 100000 struct muldiv { u32 multiplier; u32 divider; }; /* * If MSR_PERF_STAT[31] is set, the maximum resolved bus ratio can be * read in MSR_PLATFORM_ID[12:8], otherwise in MSR_PERF_STAT[44:40]. * Unfortunately some Intel Atom SoCs aren't quite compliant to this, * so we need manually differentiate SoC families. This is what the * field use_msr_plat does. */ struct freq_desc { bool use_msr_plat; struct muldiv muldiv[MAX_NUM_FREQS]; /* * Some CPU frequencies in the SDM do not map to known PLL freqs, in * that case the muldiv array is empty and the freqs array is used. */ u32 freqs[MAX_NUM_FREQS]; u32 mask; }; /* * Penwell and Clovertrail use spread spectrum clock, * so the freq number is not exactly the same as reported * by MSR based on SDM. */ static const struct freq_desc freq_desc_pnw = { .use_msr_plat = false, .freqs = { 0, 0, 0, 0, 0, 99840, 0, 83200 }, .mask = 0x07, }; static const struct freq_desc freq_desc_clv = { .use_msr_plat = false, .freqs = { 0, 133200, 0, 0, 0, 99840, 0, 83200 }, .mask = 0x07, }; /* * Bay Trail SDM MSR_FSB_FREQ frequencies simplified PLL model: * 000: 100 * 5 / 6 = 83.3333 MHz * 001: 100 * 1 / 1 = 100.0000 MHz * 010: 100 * 4 / 3 = 133.3333 MHz * 011: 100 * 7 / 6 = 116.6667 MHz * 100: 100 * 4 / 5 = 80.0000 MHz */ static const struct freq_desc freq_desc_byt = { .use_msr_plat = true, .muldiv = { { 5, 6 }, { 1, 1 }, { 4, 3 }, { 7, 6 }, { 4, 5 } }, .mask = 0x07, }; /* * Cherry Trail SDM MSR_FSB_FREQ frequencies simplified PLL model: * 0000: 100 * 5 / 6 = 83.3333 MHz * 0001: 100 * 1 / 1 = 100.0000 MHz * 0010: 100 * 4 / 3 = 133.3333 MHz * 0011: 100 * 7 / 6 = 116.6667 MHz * 0100: 100 * 4 / 5 = 80.0000 MHz * 0101: 100 * 14 / 15 = 93.3333 MHz * 0110: 100 * 9 / 10 = 90.0000 MHz * 0111: 100 * 8 / 9 = 88.8889 MHz * 1000: 100 * 7 / 8 = 87.5000 MHz */ static const struct freq_desc freq_desc_cht = { .use_msr_plat = true, .muldiv = { { 5, 6 }, { 1, 1 }, { 4, 3 }, { 7, 6 }, { 4, 5 }, { 14, 15 }, { 9, 10 }, { 8, 9 }, { 7, 8 } }, .mask = 0x0f, }; /* * Merriefield SDM MSR_FSB_FREQ frequencies simplified PLL model: * 0001: 100 * 1 / 1 = 100.0000 MHz * 0010: 100 * 4 / 3 = 133.3333 MHz */ static const struct freq_desc freq_desc_tng = { .use_msr_plat = true, .muldiv = { { 0, 0 }, { 1, 1 }, { 4, 3 } }, .mask = 0x07, }; /* * Moorefield SDM MSR_FSB_FREQ frequencies simplified PLL model: * 0000: 100 * 5 / 6 = 83.3333 MHz * 0001: 100 * 1 / 1 = 100.0000 MHz * 0010: 100 * 4 / 3 = 133.3333 MHz * 0011: 100 * 1 / 1 = 100.0000 MHz */ static const struct freq_desc freq_desc_ann = { .use_msr_plat = true, .muldiv = { { 5, 6 }, { 1, 1 }, { 4, 3 }, { 1, 1 } }, .mask = 0x0f, }; /* 24 MHz crystal? : 24 * 13 / 4 = 78 MHz */ static const struct freq_desc freq_desc_lgm = { .use_msr_plat = true, .freqs = { 78000, 78000, 78000, 78000, 78000, 78000, 78000, 78000 }, .mask = 0x0f, }; static const struct x86_cpu_id tsc_msr_cpu_ids[] = { X86_MATCH_INTEL_FAM6_MODEL(ATOM_SALTWELL_MID, &freq_desc_pnw), X86_MATCH_INTEL_FAM6_MODEL(ATOM_SALTWELL_TABLET,&freq_desc_clv), X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT, &freq_desc_byt), X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_MID, &freq_desc_tng), X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT, &freq_desc_cht), X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT_MID, &freq_desc_ann), X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT_NP, &freq_desc_lgm), {} }; /* * MSR-based CPU/TSC frequency discovery for certain CPUs. * * Set global "lapic_timer_period" to bus_clock_cycles/jiffy * Return processor base frequency in KHz, or 0 on failure. */ unsigned long cpu_khz_from_msr(void) { u32 lo, hi, ratio, freq, tscref; const struct freq_desc *freq_desc; const struct x86_cpu_id *id; const struct muldiv *md; unsigned long res; int index; id = x86_match_cpu(tsc_msr_cpu_ids); if (!id) return 0; freq_desc = (struct freq_desc *)id->driver_data; if (freq_desc->use_msr_plat) { rdmsr(MSR_PLATFORM_INFO, lo, hi); ratio = (lo >> 8) & 0xff; } else { rdmsr(MSR_IA32_PERF_STATUS, lo, hi); ratio = (hi >> 8) & 0x1f; } /* Get FSB FREQ ID */ rdmsr(MSR_FSB_FREQ, lo, hi); index = lo & freq_desc->mask; md = &freq_desc->muldiv[index]; /* * Note this also catches cases where the index points to an unpopulated * part of muldiv, in that case the else will set freq and res to 0. */ if (md->divider) { tscref = TSC_REFERENCE_KHZ * md->multiplier; freq = DIV_ROUND_CLOSEST(tscref, md->divider); /* * Multiplying by ratio before the division has better * accuracy than just calculating freq * ratio. */ res = DIV_ROUND_CLOSEST(tscref * ratio, md->divider); } else { freq = freq_desc->freqs[index]; res = freq * ratio; } if (freq == 0) pr_err("Error MSR_FSB_FREQ index %d is unknown\n", index); #ifdef CONFIG_X86_LOCAL_APIC lapic_timer_period = (freq * 1000) / HZ; #endif /* * TSC frequency determined by MSR is always considered "known" * because it is reported by HW. * Another fact is that on MSR capable platforms, PIT/HPET is * generally not available so calibration won't work at all. */ setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ); /* * Unfortunately there is no way for hardware to tell whether the * TSC is reliable. We were told by silicon design team that TSC * on Atom SoCs are always "reliable". TSC is also the only * reliable clocksource on these SoCs (HPET is either not present * or not functional) so mark TSC reliable which removes the * requirement for a watchdog clocksource. */ setup_force_cpu_cap(X86_FEATURE_TSC_RELIABLE); return res; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1