Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Ricardo Ribalda Delgado | 556 | 34.84% | 5 | 20.83% |
John Linn | 447 | 28.01% | 1 | 4.17% |
Iban Rodriguez | 247 | 15.48% | 1 | 4.17% |
Michal Simek | 204 | 12.78% | 5 | 20.83% |
Robert Hancock | 95 | 5.95% | 1 | 4.17% |
Gernot Vormayr | 16 | 1.00% | 1 | 4.17% |
Linus Walleij | 12 | 0.75% | 3 | 12.50% |
Paul Thomas | 7 | 0.44% | 1 | 4.17% |
Paul Gortmaker | 3 | 0.19% | 1 | 4.17% |
Tejun Heo | 3 | 0.19% | 1 | 4.17% |
Raphaël Teysseyre | 2 | 0.13% | 1 | 4.17% |
Thomas Gleixner | 2 | 0.13% | 1 | 4.17% |
Anton Vorontsov | 1 | 0.06% | 1 | 4.17% |
Jingoo Han | 1 | 0.06% | 1 | 4.17% |
Total | 1596 | 24 |
// SPDX-License-Identifier: GPL-2.0-only /* * Xilinx gpio driver for xps/axi_gpio IP. * * Copyright 2008 - 2013 Xilinx, Inc. */ #include <linux/bitops.h> #include <linux/init.h> #include <linux/errno.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/of_platform.h> #include <linux/io.h> #include <linux/gpio/driver.h> #include <linux/slab.h> /* Register Offset Definitions */ #define XGPIO_DATA_OFFSET (0x0) /* Data register */ #define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */ #define XGPIO_CHANNEL_OFFSET 0x8 /* Read/Write access to the GPIO registers */ #if defined(CONFIG_ARCH_ZYNQ) || defined(CONFIG_X86) # define xgpio_readreg(offset) readl(offset) # define xgpio_writereg(offset, val) writel(val, offset) #else # define xgpio_readreg(offset) __raw_readl(offset) # define xgpio_writereg(offset, val) __raw_writel(val, offset) #endif /** * struct xgpio_instance - Stores information about GPIO device * @gc: GPIO chip * @regs: register block * @gpio_width: GPIO width for every channel * @gpio_state: GPIO state shadow register * @gpio_dir: GPIO direction shadow register * @gpio_lock: Lock used for synchronization */ struct xgpio_instance { struct gpio_chip gc; void __iomem *regs; unsigned int gpio_width[2]; u32 gpio_state[2]; u32 gpio_dir[2]; spinlock_t gpio_lock[2]; }; static inline int xgpio_index(struct xgpio_instance *chip, int gpio) { if (gpio >= chip->gpio_width[0]) return 1; return 0; } static inline int xgpio_regoffset(struct xgpio_instance *chip, int gpio) { if (xgpio_index(chip, gpio)) return XGPIO_CHANNEL_OFFSET; return 0; } static inline int xgpio_offset(struct xgpio_instance *chip, int gpio) { if (xgpio_index(chip, gpio)) return gpio - chip->gpio_width[0]; return gpio; } /** * xgpio_get - Read the specified signal of the GPIO device. * @gc: Pointer to gpio_chip device structure. * @gpio: GPIO signal number. * * This function reads the specified signal of the GPIO device. * * Return: * 0 if direction of GPIO signals is set as input otherwise it * returns negative error value. */ static int xgpio_get(struct gpio_chip *gc, unsigned int gpio) { struct xgpio_instance *chip = gpiochip_get_data(gc); u32 val; val = xgpio_readreg(chip->regs + XGPIO_DATA_OFFSET + xgpio_regoffset(chip, gpio)); return !!(val & BIT(xgpio_offset(chip, gpio))); } /** * xgpio_set - Write the specified signal of the GPIO device. * @gc: Pointer to gpio_chip device structure. * @gpio: GPIO signal number. * @val: Value to be written to specified signal. * * This function writes the specified value in to the specified signal of the * GPIO device. */ static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val) { unsigned long flags; struct xgpio_instance *chip = gpiochip_get_data(gc); int index = xgpio_index(chip, gpio); int offset = xgpio_offset(chip, gpio); spin_lock_irqsave(&chip->gpio_lock[index], flags); /* Write to GPIO signal and set its direction to output */ if (val) chip->gpio_state[index] |= BIT(offset); else chip->gpio_state[index] &= ~BIT(offset); xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET + xgpio_regoffset(chip, gpio), chip->gpio_state[index]); spin_unlock_irqrestore(&chip->gpio_lock[index], flags); } /** * xgpio_set_multiple - Write the specified signals of the GPIO device. * @gc: Pointer to gpio_chip device structure. * @mask: Mask of the GPIOS to modify. * @bits: Value to be wrote on each GPIO * * This function writes the specified values into the specified signals of the * GPIO devices. */ static void xgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask, unsigned long *bits) { unsigned long flags; struct xgpio_instance *chip = gpiochip_get_data(gc); int index = xgpio_index(chip, 0); int offset, i; spin_lock_irqsave(&chip->gpio_lock[index], flags); /* Write to GPIO signals */ for (i = 0; i < gc->ngpio; i++) { if (*mask == 0) break; /* Once finished with an index write it out to the register */ if (index != xgpio_index(chip, i)) { xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET + index * XGPIO_CHANNEL_OFFSET, chip->gpio_state[index]); spin_unlock_irqrestore(&chip->gpio_lock[index], flags); index = xgpio_index(chip, i); spin_lock_irqsave(&chip->gpio_lock[index], flags); } if (__test_and_clear_bit(i, mask)) { offset = xgpio_offset(chip, i); if (test_bit(i, bits)) chip->gpio_state[index] |= BIT(offset); else chip->gpio_state[index] &= ~BIT(offset); } } xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET + index * XGPIO_CHANNEL_OFFSET, chip->gpio_state[index]); spin_unlock_irqrestore(&chip->gpio_lock[index], flags); } /** * xgpio_dir_in - Set the direction of the specified GPIO signal as input. * @gc: Pointer to gpio_chip device structure. * @gpio: GPIO signal number. * * Return: * 0 - if direction of GPIO signals is set as input * otherwise it returns negative error value. */ static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio) { unsigned long flags; struct xgpio_instance *chip = gpiochip_get_data(gc); int index = xgpio_index(chip, gpio); int offset = xgpio_offset(chip, gpio); spin_lock_irqsave(&chip->gpio_lock[index], flags); /* Set the GPIO bit in shadow register and set direction as input */ chip->gpio_dir[index] |= BIT(offset); xgpio_writereg(chip->regs + XGPIO_TRI_OFFSET + xgpio_regoffset(chip, gpio), chip->gpio_dir[index]); spin_unlock_irqrestore(&chip->gpio_lock[index], flags); return 0; } /** * xgpio_dir_out - Set the direction of the specified GPIO signal as output. * @gc: Pointer to gpio_chip device structure. * @gpio: GPIO signal number. * @val: Value to be written to specified signal. * * This function sets the direction of specified GPIO signal as output. * * Return: * If all GPIO signals of GPIO chip is configured as input then it returns * error otherwise it returns 0. */ static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) { unsigned long flags; struct xgpio_instance *chip = gpiochip_get_data(gc); int index = xgpio_index(chip, gpio); int offset = xgpio_offset(chip, gpio); spin_lock_irqsave(&chip->gpio_lock[index], flags); /* Write state of GPIO signal */ if (val) chip->gpio_state[index] |= BIT(offset); else chip->gpio_state[index] &= ~BIT(offset); xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET + xgpio_regoffset(chip, gpio), chip->gpio_state[index]); /* Clear the GPIO bit in shadow register and set direction as output */ chip->gpio_dir[index] &= ~BIT(offset); xgpio_writereg(chip->regs + XGPIO_TRI_OFFSET + xgpio_regoffset(chip, gpio), chip->gpio_dir[index]); spin_unlock_irqrestore(&chip->gpio_lock[index], flags); return 0; } /** * xgpio_save_regs - Set initial values of GPIO pins * @chip: Pointer to GPIO instance */ static void xgpio_save_regs(struct xgpio_instance *chip) { xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET, chip->gpio_state[0]); xgpio_writereg(chip->regs + XGPIO_TRI_OFFSET, chip->gpio_dir[0]); if (!chip->gpio_width[1]) return; xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET + XGPIO_CHANNEL_OFFSET, chip->gpio_state[1]); xgpio_writereg(chip->regs + XGPIO_TRI_OFFSET + XGPIO_CHANNEL_OFFSET, chip->gpio_dir[1]); } /** * xgpio_of_probe - Probe method for the GPIO device. * @pdev: pointer to the platform device * * Return: * It returns 0, if the driver is bound to the GPIO device, or * a negative value if there is an error. */ static int xgpio_probe(struct platform_device *pdev) { struct xgpio_instance *chip; int status = 0; struct device_node *np = pdev->dev.of_node; u32 is_dual; chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); if (!chip) return -ENOMEM; platform_set_drvdata(pdev, chip); /* Update GPIO state shadow register with default value */ of_property_read_u32(np, "xlnx,dout-default", &chip->gpio_state[0]); /* Update GPIO direction shadow register with default value */ if (of_property_read_u32(np, "xlnx,tri-default", &chip->gpio_dir[0])) chip->gpio_dir[0] = 0xFFFFFFFF; /* * Check device node and parent device node for device width * and assume default width of 32 */ if (of_property_read_u32(np, "xlnx,gpio-width", &chip->gpio_width[0])) chip->gpio_width[0] = 32; spin_lock_init(&chip->gpio_lock[0]); if (of_property_read_u32(np, "xlnx,is-dual", &is_dual)) is_dual = 0; if (is_dual) { /* Update GPIO state shadow register with default value */ of_property_read_u32(np, "xlnx,dout-default-2", &chip->gpio_state[1]); /* Update GPIO direction shadow register with default value */ if (of_property_read_u32(np, "xlnx,tri-default-2", &chip->gpio_dir[1])) chip->gpio_dir[1] = 0xFFFFFFFF; /* * Check device node and parent device node for device width * and assume default width of 32 */ if (of_property_read_u32(np, "xlnx,gpio2-width", &chip->gpio_width[1])) chip->gpio_width[1] = 32; spin_lock_init(&chip->gpio_lock[1]); } chip->gc.base = -1; chip->gc.ngpio = chip->gpio_width[0] + chip->gpio_width[1]; chip->gc.parent = &pdev->dev; chip->gc.direction_input = xgpio_dir_in; chip->gc.direction_output = xgpio_dir_out; chip->gc.get = xgpio_get; chip->gc.set = xgpio_set; chip->gc.set_multiple = xgpio_set_multiple; chip->gc.label = dev_name(&pdev->dev); chip->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(chip->regs)) { dev_err(&pdev->dev, "failed to ioremap memory resource\n"); return PTR_ERR(chip->regs); } xgpio_save_regs(chip); status = devm_gpiochip_add_data(&pdev->dev, &chip->gc, chip); if (status) { dev_err(&pdev->dev, "failed to add GPIO chip\n"); return status; } return 0; } static const struct of_device_id xgpio_of_match[] = { { .compatible = "xlnx,xps-gpio-1.00.a", }, { /* end of list */ }, }; MODULE_DEVICE_TABLE(of, xgpio_of_match); static struct platform_driver xgpio_plat_driver = { .probe = xgpio_probe, .driver = { .name = "gpio-xilinx", .of_match_table = xgpio_of_match, }, }; static int __init xgpio_init(void) { return platform_driver_register(&xgpio_plat_driver); } subsys_initcall(xgpio_init); static void __exit xgpio_exit(void) { platform_driver_unregister(&xgpio_plat_driver); } module_exit(xgpio_exit); MODULE_AUTHOR("Xilinx, Inc."); MODULE_DESCRIPTION("Xilinx GPIO driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1