| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Chengming Gui | 2301 | 85.76% | 1 | 10.00% |
| Evan Quan | 382 | 14.24% | 9 | 90.00% |
| Total | 2683 | 10 |
/* * Copyright 2019 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * */ #ifndef SMU11_DRIVER_IF_ARCTURUS_H #define SMU11_DRIVER_IF_ARCTURUS_H // *** IMPORTANT *** // SMU TEAM: Always increment the interface version if // any structure is changed in this file //#define SMU11_DRIVER_IF_VERSION 0x09 #define PPTABLE_ARCTURUS_SMU_VERSION 4 #define NUM_GFXCLK_DPM_LEVELS 16 #define NUM_VCLK_DPM_LEVELS 8 #define NUM_DCLK_DPM_LEVELS 8 #define NUM_MP0CLK_DPM_LEVELS 2 #define NUM_SOCCLK_DPM_LEVELS 8 #define NUM_UCLK_DPM_LEVELS 4 #define NUM_FCLK_DPM_LEVELS 8 #define NUM_XGMI_LEVELS 2 #define NUM_XGMI_PSTATE_LEVELS 4 #define MAX_GFXCLK_DPM_LEVEL (NUM_GFXCLK_DPM_LEVELS - 1) #define MAX_VCLK_DPM_LEVEL (NUM_VCLK_DPM_LEVELS - 1) #define MAX_DCLK_DPM_LEVEL (NUM_DCLK_DPM_LEVELS - 1) #define MAX_MP0CLK_DPM_LEVEL (NUM_MP0CLK_DPM_LEVELS - 1) #define MAX_SOCCLK_DPM_LEVEL (NUM_SOCCLK_DPM_LEVELS - 1) #define MAX_UCLK_DPM_LEVEL (NUM_UCLK_DPM_LEVELS - 1) #define MAX_FCLK_DPM_LEVEL (NUM_FCLK_DPM_LEVELS - 1) #define MAX_XGMI_LEVEL (NUM_XGMI_LEVELS - 1) #define MAX_XGMI_PSTATE_LEVEL (NUM_XGMI_PSTATE_LEVELS - 1) // Feature Control Defines // DPM #define FEATURE_DPM_PREFETCHER_BIT 0 #define FEATURE_DPM_GFXCLK_BIT 1 #define FEATURE_DPM_UCLK_BIT 2 #define FEATURE_DPM_SOCCLK_BIT 3 #define FEATURE_DPM_FCLK_BIT 4 #define FEATURE_DPM_MP0CLK_BIT 5 #define FEATURE_DPM_XGMI_BIT 6 // Idle #define FEATURE_DS_GFXCLK_BIT 7 #define FEATURE_DS_SOCCLK_BIT 8 #define FEATURE_DS_LCLK_BIT 9 #define FEATURE_DS_FCLK_BIT 10 #define FEATURE_DS_UCLK_BIT 11 #define FEATURE_GFX_ULV_BIT 12 #define FEATURE_DPM_VCN_BIT 13 #define FEATURE_RSMU_SMN_CG_BIT 14 #define FEATURE_WAFL_CG_BIT 15 // Throttler/Response #define FEATURE_PPT_BIT 16 #define FEATURE_TDC_BIT 17 #define FEATURE_APCC_PLUS_BIT 18 #define FEATURE_VR0HOT_BIT 19 #define FEATURE_VR1HOT_BIT 20 #define FEATURE_FW_CTF_BIT 21 #define FEATURE_FAN_CONTROL_BIT 22 #define FEATURE_THERMAL_BIT 23 // Other #define FEATURE_OUT_OF_BAND_MONITOR_BIT 24 #define FEATURE_TEMP_DEPENDENT_VMIN_BIT 25 #define FEATURE_PER_PART_VMIN_BIT 26 #define FEATURE_SPARE_27_BIT 27 #define FEATURE_SPARE_28_BIT 28 #define FEATURE_SPARE_29_BIT 29 #define FEATURE_SPARE_30_BIT 30 #define FEATURE_SPARE_31_BIT 31 #define FEATURE_SPARE_32_BIT 32 #define FEATURE_SPARE_33_BIT 33 #define FEATURE_SPARE_34_BIT 34 #define FEATURE_SPARE_35_BIT 35 #define FEATURE_SPARE_36_BIT 36 #define FEATURE_SPARE_37_BIT 37 #define FEATURE_SPARE_38_BIT 38 #define FEATURE_SPARE_39_BIT 39 #define FEATURE_SPARE_40_BIT 40 #define FEATURE_SPARE_41_BIT 41 #define FEATURE_SPARE_42_BIT 42 #define FEATURE_SPARE_43_BIT 43 #define FEATURE_SPARE_44_BIT 44 #define FEATURE_SPARE_45_BIT 45 #define FEATURE_SPARE_46_BIT 46 #define FEATURE_SPARE_47_BIT 47 #define FEATURE_SPARE_48_BIT 48 #define FEATURE_SPARE_49_BIT 49 #define FEATURE_SPARE_50_BIT 50 #define FEATURE_SPARE_51_BIT 51 #define FEATURE_SPARE_52_BIT 52 #define FEATURE_SPARE_53_BIT 53 #define FEATURE_SPARE_54_BIT 54 #define FEATURE_SPARE_55_BIT 55 #define FEATURE_SPARE_56_BIT 56 #define FEATURE_SPARE_57_BIT 57 #define FEATURE_SPARE_58_BIT 58 #define FEATURE_SPARE_59_BIT 59 #define FEATURE_SPARE_60_BIT 60 #define FEATURE_SPARE_61_BIT 61 #define FEATURE_SPARE_62_BIT 62 #define FEATURE_SPARE_63_BIT 63 #define NUM_FEATURES 64 #define FEATURE_DPM_PREFETCHER_MASK (1 << FEATURE_DPM_PREFETCHER_BIT ) #define FEATURE_DPM_GFXCLK_MASK (1 << FEATURE_DPM_GFXCLK_BIT ) #define FEATURE_DPM_UCLK_MASK (1 << FEATURE_DPM_UCLK_BIT ) #define FEATURE_DPM_SOCCLK_MASK (1 << FEATURE_DPM_SOCCLK_BIT ) #define FEATURE_DPM_FCLK_MASK (1 << FEATURE_DPM_FCLK_BIT ) #define FEATURE_DPM_MP0CLK_MASK (1 << FEATURE_DPM_MP0CLK_BIT ) #define FEATURE_DPM_XGMI_MASK (1 << FEATURE_DPM_XGMI_BIT ) #define FEATURE_DS_GFXCLK_MASK (1 << FEATURE_DS_GFXCLK_BIT ) #define FEATURE_DS_SOCCLK_MASK (1 << FEATURE_DS_SOCCLK_BIT ) #define FEATURE_DS_LCLK_MASK (1 << FEATURE_DS_LCLK_BIT ) #define FEATURE_DS_FCLK_MASK (1 << FEATURE_DS_FCLK_BIT ) #define FEATURE_DS_UCLK_MASK (1 << FEATURE_DS_UCLK_BIT ) #define FEATURE_GFX_ULV_MASK (1 << FEATURE_GFX_ULV_BIT ) #define FEATURE_DPM_VCN_MASK (1 << FEATURE_DPM_VCN_BIT ) #define FEATURE_RSMU_SMN_CG_MASK (1 << FEATURE_RSMU_SMN_CG_BIT ) #define FEATURE_WAFL_CG_MASK (1 << FEATURE_WAFL_CG_BIT ) #define FEATURE_PPT_MASK (1 << FEATURE_PPT_BIT ) #define FEATURE_TDC_MASK (1 << FEATURE_TDC_BIT ) #define FEATURE_APCC_PLUS_MASK (1 << FEATURE_APCC_PLUS_BIT ) #define FEATURE_VR0HOT_MASK (1 << FEATURE_VR0HOT_BIT ) #define FEATURE_VR1HOT_MASK (1 << FEATURE_VR1HOT_BIT ) #define FEATURE_FW_CTF_MASK (1 << FEATURE_FW_CTF_BIT ) #define FEATURE_FAN_CONTROL_MASK (1 << FEATURE_FAN_CONTROL_BIT ) #define FEATURE_THERMAL_MASK (1 << FEATURE_THERMAL_BIT ) #define FEATURE_OUT_OF_BAND_MONITOR_MASK (1 << FEATURE_OUT_OF_BAND_MONITOR_BIT ) #define FEATURE_TEMP_DEPENDENT_VMIN_MASK (1 << FEATURE_TEMP_DEPENDENT_VMIN_BIT ) #define FEATURE_PER_PART_VMIN_MASK (1 << FEATURE_PER_PART_VMIN_BIT ) //FIXME need updating // Debug Overrides Bitmask #define DPM_OVERRIDE_DISABLE_UCLK_PID 0x00000001 #define DPM_OVERRIDE_DISABLE_VOLT_LINK_VCN_FCLK 0x00000002 // I2C Config Bit Defines #define I2C_CONTROLLER_ENABLED 1 #define I2C_CONTROLLER_DISABLED 0 // VR Mapping Bit Defines #define VR_MAPPING_VR_SELECT_MASK 0x01 #define VR_MAPPING_VR_SELECT_SHIFT 0x00 #define VR_MAPPING_PLANE_SELECT_MASK 0x02 #define VR_MAPPING_PLANE_SELECT_SHIFT 0x01 // PSI Bit Defines #define PSI_SEL_VR0_PLANE0_PSI0 0x01 #define PSI_SEL_VR0_PLANE0_PSI1 0x02 #define PSI_SEL_VR0_PLANE1_PSI0 0x04 #define PSI_SEL_VR0_PLANE1_PSI1 0x08 #define PSI_SEL_VR1_PLANE0_PSI0 0x10 #define PSI_SEL_VR1_PLANE0_PSI1 0x20 #define PSI_SEL_VR1_PLANE1_PSI0 0x40 #define PSI_SEL_VR1_PLANE1_PSI1 0x80 // Throttler Control/Status Bits #define THROTTLER_PADDING_BIT 0 #define THROTTLER_TEMP_EDGE_BIT 1 #define THROTTLER_TEMP_HOTSPOT_BIT 2 #define THROTTLER_TEMP_MEM_BIT 3 #define THROTTLER_TEMP_VR_GFX_BIT 4 #define THROTTLER_TEMP_VR_MEM_BIT 5 #define THROTTLER_TEMP_VR_SOC_BIT 6 #define THROTTLER_TDC_GFX_BIT 7 #define THROTTLER_TDC_SOC_BIT 8 #define THROTTLER_PPT0_BIT 9 #define THROTTLER_PPT1_BIT 10 #define THROTTLER_PPT2_BIT 11 #define THROTTLER_PPT3_BIT 12 #define THROTTLER_PPM_BIT 13 #define THROTTLER_FIT_BIT 14 #define THROTTLER_APCC_BIT 15 // Table transfer status #define TABLE_TRANSFER_OK 0x0 #define TABLE_TRANSFER_FAILED 0xFF #define TABLE_TRANSFER_PENDING 0xAB // Workload bits #define WORKLOAD_PPLIB_DEFAULT_BIT 0 #define WORKLOAD_PPLIB_POWER_SAVING_BIT 1 #define WORKLOAD_PPLIB_VIDEO_BIT 2 #define WORKLOAD_PPLIB_COMPUTE_BIT 3 #define WORKLOAD_PPLIB_CUSTOM_BIT 4 #define WORKLOAD_PPLIB_COUNT 5 //XGMI performance states #define XGMI_STATE_D0 1 #define XGMI_STATE_D3 0 #define NUM_I2C_CONTROLLERS 8 #define I2C_CONTROLLER_ENABLED 1 #define I2C_CONTROLLER_DISABLED 0 #define MAX_SW_I2C_COMMANDS 8 typedef enum { I2C_CONTROLLER_PORT_0 = 0, //CKSVII2C0 I2C_CONTROLLER_PORT_1 = 1, //CKSVII2C1 I2C_CONTROLLER_PORT_COUNT, } I2cControllerPort_e; typedef enum { I2C_CONTROLLER_NAME_VR_GFX = 0, I2C_CONTROLLER_NAME_VR_SOC, I2C_CONTROLLER_NAME_VR_MEM, I2C_CONTROLLER_NAME_SPARE, I2C_CONTROLLER_NAME_COUNT, } I2cControllerName_e; typedef enum { I2C_CONTROLLER_THROTTLER_TYPE_NONE = 0, I2C_CONTROLLER_THROTTLER_VR_GFX, I2C_CONTROLLER_THROTTLER_VR_SOC, I2C_CONTROLLER_THROTTLER_VR_MEM, I2C_CONTROLLER_THROTTLER_COUNT, } I2cControllerThrottler_e; typedef enum { I2C_CONTROLLER_PROTOCOL_VR_0, I2C_CONTROLLER_PROTOCOL_VR_1, I2C_CONTROLLER_PROTOCOL_TMP_0, I2C_CONTROLLER_PROTOCOL_TMP_1, I2C_CONTROLLER_PROTOCOL_SPARE_0, I2C_CONTROLLER_PROTOCOL_SPARE_1, I2C_CONTROLLER_PROTOCOL_COUNT, } I2cControllerProtocol_e; typedef struct { uint8_t Enabled; uint8_t Speed; uint8_t Padding[2]; uint32_t SlaveAddress; uint8_t ControllerPort; uint8_t ControllerName; uint8_t ThermalThrotter; uint8_t I2cProtocol; } I2cControllerConfig_t; typedef enum { I2C_PORT_SVD_SCL = 0, I2C_PORT_GPIO, } I2cPort_e; typedef enum { I2C_SPEED_FAST_50K = 0, //50 Kbits/s I2C_SPEED_FAST_100K, //100 Kbits/s I2C_SPEED_FAST_400K, //400 Kbits/s I2C_SPEED_FAST_PLUS_1M, //1 Mbits/s (in fast mode) I2C_SPEED_HIGH_1M, //1 Mbits/s (in high speed mode) I2C_SPEED_HIGH_2M, //2.3 Mbits/s I2C_SPEED_COUNT, } I2cSpeed_e; typedef enum { I2C_CMD_READ = 0, I2C_CMD_WRITE, I2C_CMD_COUNT, } I2cCmdType_e; #define CMDCONFIG_STOP_BIT 0 #define CMDCONFIG_RESTART_BIT 1 #define CMDCONFIG_STOP_MASK (1 << CMDCONFIG_STOP_BIT) #define CMDCONFIG_RESTART_MASK (1 << CMDCONFIG_RESTART_BIT) typedef struct { uint8_t RegisterAddr; ////only valid for write, ignored for read uint8_t Cmd; //Read(0) or Write(1) uint8_t Data; //Return data for read. Data to send for write uint8_t CmdConfig; //Includes whether associated command should have a stop or restart command } SwI2cCmd_t; //SW I2C Command Table typedef struct { uint8_t I2CcontrollerPort; //CKSVII2C0(0) or //CKSVII2C1(1) uint8_t I2CSpeed; //Slow(0) or Fast(1) uint16_t SlaveAddress; uint8_t NumCmds; //Number of commands uint8_t Padding[3]; SwI2cCmd_t SwI2cCmds[MAX_SW_I2C_COMMANDS]; uint32_t MmHubPadding[8]; // SMU internal use } SwI2cRequest_t; // SW I2C Request Table //D3HOT sequences typedef enum { BACO_SEQUENCE, MSR_SEQUENCE, BAMACO_SEQUENCE, ULPS_SEQUENCE, D3HOT_SEQUENCE_COUNT, }D3HOTSequence_e; //THis is aligned with RSMU PGFSM Register Mapping typedef enum { PG_DYNAMIC_MODE = 0, PG_STATIC_MODE, } PowerGatingMode_e; //This is aligned with RSMU PGFSM Register Mapping typedef enum { PG_POWER_DOWN = 0, PG_POWER_UP, } PowerGatingSettings_e; typedef struct { uint32_t a; // store in IEEE float format in this variable uint32_t b; // store in IEEE float format in this variable uint32_t c; // store in IEEE float format in this variable } QuadraticInt_t; typedef struct { uint32_t m; // store in IEEE float format in this variable uint32_t b; // store in IEEE float format in this variable } LinearInt_t; typedef struct { uint32_t a; // store in IEEE float format in this variable uint32_t b; // store in IEEE float format in this variable uint32_t c; // store in IEEE float format in this variable } DroopInt_t; typedef enum { GFXCLK_SOURCE_PLL = 0, GFXCLK_SOURCE_AFLL, GFXCLK_SOURCE_COUNT, } GfxclkSrc_e; typedef enum { PPCLK_GFXCLK, PPCLK_VCLK, PPCLK_DCLK, PPCLK_SOCCLK, PPCLK_UCLK, PPCLK_FCLK, PPCLK_COUNT, } PPCLK_e; typedef enum { POWER_SOURCE_AC, POWER_SOURCE_DC, POWER_SOURCE_COUNT, } POWER_SOURCE_e; typedef enum { TEMP_EDGE, TEMP_HOTSPOT, TEMP_MEM, TEMP_VR_GFX, TEMP_VR_SOC, TEMP_VR_MEM, TEMP_COUNT } TEMP_TYPE_e; typedef enum { PPT_THROTTLER_PPT0, PPT_THROTTLER_PPT1, PPT_THROTTLER_PPT2, PPT_THROTTLER_PPT3, PPT_THROTTLER_COUNT } PPT_THROTTLER_e; typedef enum { VOLTAGE_MODE_AVFS = 0, VOLTAGE_MODE_AVFS_SS, VOLTAGE_MODE_SS, VOLTAGE_MODE_COUNT, } VOLTAGE_MODE_e; typedef enum { AVFS_VOLTAGE_GFX = 0, AVFS_VOLTAGE_SOC, AVFS_VOLTAGE_COUNT, } AVFS_VOLTAGE_TYPE_e; typedef enum { GPIO_INT_POLARITY_ACTIVE_LOW = 0, GPIO_INT_POLARITY_ACTIVE_HIGH, } GpioIntPolarity_e; typedef enum { MEMORY_TYPE_GDDR6 = 0, MEMORY_TYPE_HBM, } MemoryType_e; typedef enum { PWR_CONFIG_TDP = 0, PWR_CONFIG_TGP, PWR_CONFIG_TCP_ESTIMATED, PWR_CONFIG_TCP_MEASURED, } PwrConfig_e; typedef enum { XGMI_LINK_RATE_2 = 2, // 2Gbps XGMI_LINK_RATE_4 = 4, // 4Gbps XGMI_LINK_RATE_8 = 8, // 8Gbps XGMI_LINK_RATE_12 = 12, // 12Gbps XGMI_LINK_RATE_16 = 16, // 16Gbps XGMI_LINK_RATE_17 = 17, // 17Gbps XGMI_LINK_RATE_18 = 18, // 18Gbps XGMI_LINK_RATE_19 = 19, // 19Gbps XGMI_LINK_RATE_20 = 20, // 20Gbps XGMI_LINK_RATE_21 = 21, // 21Gbps XGMI_LINK_RATE_22 = 22, // 22Gbps XGMI_LINK_RATE_23 = 23, // 23Gbps XGMI_LINK_RATE_24 = 24, // 24Gbps XGMI_LINK_RATE_25 = 25, // 25Gbps XGMI_LINK_RATE_COUNT } XGMI_LINK_RATE_e; typedef enum { XGMI_LINK_WIDTH_1 = 1, // x1 XGMI_LINK_WIDTH_2 = 2, // x2 XGMI_LINK_WIDTH_4 = 4, // x4 XGMI_LINK_WIDTH_8 = 8, // x8 XGMI_LINK_WIDTH_9 = 9, // x9 XGMI_LINK_WIDTH_16 = 16, // x16 XGMI_LINK_WIDTH_COUNT } XGMI_LINK_WIDTH_e; typedef struct { uint8_t VoltageMode; // 0 - AVFS only, 1- min(AVFS,SS), 2-SS only uint8_t SnapToDiscrete; // 0 - Fine grained DPM, 1 - Discrete DPM uint8_t NumDiscreteLevels; // Set to 2 (Fmin, Fmax) when using fine grained DPM, otherwise set to # discrete levels used uint8_t padding; LinearInt_t ConversionToAvfsClk; // Transfer function to AVFS Clock (GHz->GHz) QuadraticInt_t SsCurve; // Slow-slow curve (GHz->V) uint16_t SsFmin; // Fmin for SS curve. If SS curve is selected, will use V@SSFmin for F <= Fmin uint16_t Padding16; } DpmDescriptor_t; typedef struct { uint32_t Version; // SECTION: Feature Enablement uint32_t FeaturesToRun[2]; // SECTION: Infrastructure Limits uint16_t SocketPowerLimitAc[PPT_THROTTLER_COUNT]; uint16_t SocketPowerLimitAcTau[PPT_THROTTLER_COUNT]; uint16_t TdcLimitSoc; // Amps uint16_t TdcLimitSocTau; // Time constant of LPF in ms uint16_t TdcLimitGfx; // Amps uint16_t TdcLimitGfxTau; // Time constant of LPF in ms uint16_t TedgeLimit; // Celcius uint16_t ThotspotLimit; // Celcius uint16_t TmemLimit; // Celcius uint16_t Tvr_gfxLimit; // Celcius uint16_t Tvr_memLimit; // Celcius uint16_t Tvr_socLimit; // Celcius uint32_t FitLimit; // Failures in time (failures per million parts over the defined lifetime) uint16_t PpmPowerLimit; // Switch this this power limit when temperature is above PpmTempThreshold uint16_t PpmTemperatureThreshold; // SECTION: Throttler settings uint32_t ThrottlerControlMask; // See Throtter masks defines // SECTION: ULV Settings uint16_t UlvVoltageOffsetGfx; // In mV(Q2) uint16_t UlvPadding; // Padding uint8_t UlvGfxclkBypass; // 1 to turn off/bypass Gfxclk during ULV, 0 to leave Gfxclk on during ULV uint8_t Padding234[3]; // SECTION: Voltage Control Parameters uint16_t MinVoltageGfx; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_GFX uint16_t MinVoltageSoc; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_SOC uint16_t MaxVoltageGfx; // In mV(Q2) Maximum Voltage allowable of VDD_GFX uint16_t MaxVoltageSoc; // In mV(Q2) Maximum Voltage allowable of VDD_SOC uint16_t LoadLineResistanceGfx; // In mOhms with 8 fractional bits uint16_t LoadLineResistanceSoc; // In mOhms with 8 fractional bits //SECTION: DPM Config 1 DpmDescriptor_t DpmDescriptor[PPCLK_COUNT]; uint16_t FreqTableGfx [NUM_GFXCLK_DPM_LEVELS ]; // In MHz uint16_t FreqTableVclk [NUM_VCLK_DPM_LEVELS ]; // In MHz uint16_t FreqTableDclk [NUM_DCLK_DPM_LEVELS ]; // In MHz uint16_t FreqTableSocclk [NUM_SOCCLK_DPM_LEVELS ]; // In MHz uint16_t FreqTableUclk [NUM_UCLK_DPM_LEVELS ]; // In MHz uint16_t FreqTableFclk [NUM_FCLK_DPM_LEVELS ]; // In MHz uint32_t Paddingclks[16]; // SECTION: DPM Config 2 uint16_t Mp0clkFreq [NUM_MP0CLK_DPM_LEVELS]; // in MHz uint16_t Mp0DpmVoltage [NUM_MP0CLK_DPM_LEVELS]; // mV(Q2) // GFXCLK DPM uint16_t GfxclkFidle; // In MHz uint16_t GfxclkSlewRate; // for PLL babystepping??? uint8_t Padding567[4]; uint16_t GfxclkDsMaxFreq; // In MHz uint8_t GfxclkSource; // 0 = PLL, 1 = AFLL uint8_t Padding456; // GFXCLK Thermal DPM (formerly 'Boost' Settings) uint16_t EnableTdpm; uint16_t TdpmHighHystTemperature; uint16_t TdpmLowHystTemperature; uint16_t GfxclkFreqHighTempLimit; // High limit on GFXCLK when temperature is high, for reliability. // SECTION: Fan Control uint16_t FanStopTemp; //Celcius uint16_t FanStartTemp; //Celcius uint16_t FanGainEdge; uint16_t FanGainHotspot; uint16_t FanGainVrGfx; uint16_t FanGainVrSoc; uint16_t FanGainVrMem; uint16_t FanGainHbm; uint16_t FanPwmMin; uint16_t FanAcousticLimitRpm; uint16_t FanThrottlingRpm; uint16_t FanMaximumRpm; uint16_t FanTargetTemperature; uint16_t FanTargetGfxclk; uint8_t FanZeroRpmEnable; uint8_t FanTachEdgePerRev; uint8_t FanTempInputSelect; uint8_t padding8_Fan; // The following are AFC override parameters. Leave at 0 to use FW defaults. int16_t FuzzyFan_ErrorSetDelta; int16_t FuzzyFan_ErrorRateSetDelta; int16_t FuzzyFan_PwmSetDelta; uint16_t FuzzyFan_Reserved; // SECTION: AVFS // Overrides uint8_t OverrideAvfsGb[AVFS_VOLTAGE_COUNT]; uint8_t Padding8_Avfs[2]; QuadraticInt_t qAvfsGb[AVFS_VOLTAGE_COUNT]; // GHz->V Override of fused curve DroopInt_t dBtcGbGfxPll; // GHz->V BtcGb DroopInt_t dBtcGbGfxAfll; // GHz->V BtcGb DroopInt_t dBtcGbSoc; // GHz->V BtcGb LinearInt_t qAgingGb[AVFS_VOLTAGE_COUNT]; // GHz->V QuadraticInt_t qStaticVoltageOffset[AVFS_VOLTAGE_COUNT]; // GHz->V uint16_t DcTol[AVFS_VOLTAGE_COUNT]; // mV Q2 uint8_t DcBtcEnabled[AVFS_VOLTAGE_COUNT]; uint8_t Padding8_GfxBtc[2]; uint16_t DcBtcMin[AVFS_VOLTAGE_COUNT]; // mV Q2 uint16_t DcBtcMax[AVFS_VOLTAGE_COUNT]; // mV Q2 uint16_t DcBtcGb[AVFS_VOLTAGE_COUNT]; // mV Q2 // SECTION: XGMI uint8_t XgmiDpmPstates[NUM_XGMI_LEVELS]; // 2 DPM states, high and low. 0-P0, 1-P1, 2-P2, 3-P3. uint8_t XgmiDpmSpare[2]; // Temperature Dependent Vmin uint16_t VDDGFX_TVmin; //Celcius uint16_t VDDSOC_TVmin; //Celcius uint16_t VDDGFX_Vmin_HiTemp; // mV Q2 uint16_t VDDGFX_Vmin_LoTemp; // mV Q2 uint16_t VDDSOC_Vmin_HiTemp; // mV Q2 uint16_t VDDSOC_Vmin_LoTemp; // mV Q2 uint16_t VDDGFX_TVminHystersis; // Celcius uint16_t VDDSOC_TVminHystersis; // Celcius // SECTION: Advanced Options uint32_t DebugOverrides; QuadraticInt_t ReservedEquation0; QuadraticInt_t ReservedEquation1; QuadraticInt_t ReservedEquation2; QuadraticInt_t ReservedEquation3; uint16_t MinVoltageUlvGfx; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_GFX in ULV mode uint16_t PaddingUlv; // Padding // Total Power configuration, use defines from PwrConfig_e uint8_t TotalPowerConfig; //0-TDP, 1-TGP, 2-TCP Estimated, 3-TCP Measured uint8_t TotalPowerSpare1; uint16_t TotalPowerSpare2; // APCC Settings uint16_t PccThresholdLow; uint16_t PccThresholdHigh; uint32_t PaddingAPCC[6]; //FIXME pending SPEC // OOB Settings uint16_t BasePerformanceCardPower; uint16_t MaxPerformanceCardPower; uint16_t BasePerformanceFrequencyCap; //In Mhz uint16_t MaxPerformanceFrequencyCap; //In Mhz // Per-Part Vmin uint16_t VDDGFX_VminLow; // mv Q2 uint16_t VDDGFX_TVminLow; //Celcius uint16_t VDDGFX_VminLow_HiTemp; // mv Q2 uint16_t VDDGFX_VminLow_LoTemp; // mv Q2 // SECTION: Reserved uint32_t Reserved[7]; // SECTION: BOARD PARAMETERS // SVI2 Board Parameters uint16_t MaxVoltageStepGfx; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value. uint16_t MaxVoltageStepSoc; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value. uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields uint8_t VddMemVrMapping; // Use VR_MAPPING* bitfields uint8_t BoardVrMapping; // Use VR_MAPPING* bitfields uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode uint8_t ExternalSensorPresent; // External RDI connected to TMON (aka TEMP IN) uint8_t Padding8_V[2]; // Telemetry Settings uint16_t GfxMaxCurrent; // in Amps int8_t GfxOffset; // in Amps uint8_t Padding_TelemetryGfx; uint16_t SocMaxCurrent; // in Amps int8_t SocOffset; // in Amps uint8_t Padding_TelemetrySoc; uint16_t MemMaxCurrent; // in Amps int8_t MemOffset; // in Amps uint8_t Padding_TelemetryMem; uint16_t BoardMaxCurrent; // in Amps int8_t BoardOffset; // in Amps uint8_t Padding_TelemetryBoardInput; // GPIO Settings uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event // GFXCLK PLL Spread Spectrum uint8_t PllGfxclkSpreadEnabled; // on or off uint8_t PllGfxclkSpreadPercent; // Q4.4 uint16_t PllGfxclkSpreadFreq; // kHz // UCLK Spread Spectrum uint8_t UclkSpreadEnabled; // on or off uint8_t UclkSpreadPercent; // Q4.4 uint16_t UclkSpreadFreq; // kHz // FCLK Spread Spectrum uint8_t FclkSpreadEnabled; // on or off uint8_t FclkSpreadPercent; // Q4.4 uint16_t FclkSpreadFreq; // kHz // GFXCLK Fll Spread Spectrum uint8_t FllGfxclkSpreadEnabled; // on or off uint8_t FllGfxclkSpreadPercent; // Q4.4 uint16_t FllGfxclkSpreadFreq; // kHz // I2C Controller Structure I2cControllerConfig_t I2cControllers[NUM_I2C_CONTROLLERS]; // Memory section uint32_t MemoryChannelEnabled; // For DRAM use only, Max 32 channels enabled bit mask. uint8_t DramBitWidth; // For DRAM use only. See Dram Bit width type defines uint8_t PaddingMem[3]; // Total board power uint16_t TotalBoardPower; //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power uint16_t BoardPadding; // SECTION: XGMI Training uint8_t XgmiLinkSpeed [NUM_XGMI_PSTATE_LEVELS]; uint8_t XgmiLinkWidth [NUM_XGMI_PSTATE_LEVELS]; uint16_t XgmiFclkFreq [NUM_XGMI_PSTATE_LEVELS]; uint16_t XgmiSocVoltage [NUM_XGMI_PSTATE_LEVELS]; // GPIO pins for I2C communications with 2nd controller for Input Telemetry Sequence uint8_t GpioI2cScl; // Serial Clock uint8_t GpioI2cSda; // Serial Data uint16_t GpioPadding; // Platform input telemetry voltage coefficient uint32_t BoardVoltageCoeffA; // decode by /1000 uint32_t BoardVoltageCoeffB; // decode by /1000 uint32_t BoardReserved[7]; // Padding for MMHUB - do not modify this uint32_t MmHubPadding[8]; // SMU internal use } PPTable_t; typedef struct { // Time constant parameters for clock averages in ms uint16_t GfxclkAverageLpfTau; uint16_t SocclkAverageLpfTau; uint16_t UclkAverageLpfTau; uint16_t GfxActivityLpfTau; uint16_t UclkActivityLpfTau; uint16_t SocketPowerLpfTau; // Padding - ignore uint32_t MmHubPadding[8]; // SMU internal use } DriverSmuConfig_t; typedef struct { uint16_t CurrClock[PPCLK_COUNT]; uint16_t AverageGfxclkFrequency; uint16_t AverageSocclkFrequency; uint16_t AverageUclkFrequency ; uint16_t AverageGfxActivity ; uint16_t AverageUclkActivity ; uint8_t CurrSocVoltageOffset ; uint8_t CurrGfxVoltageOffset ; uint8_t CurrMemVidOffset ; uint8_t Padding8 ; uint16_t AverageSocketPower ; uint16_t TemperatureEdge ; uint16_t TemperatureHotspot ; uint16_t TemperatureHBM ; uint16_t TemperatureVrGfx ; uint16_t TemperatureVrSoc ; uint16_t TemperatureVrMem ; uint32_t ThrottlerStatus ; uint16_t CurrFanSpeed ; uint16_t Padding16; uint32_t Padding[4]; // Padding - ignore uint32_t MmHubPadding[8]; // SMU internal use } SmuMetrics_t; typedef struct { uint16_t avgPsmCount[75]; uint16_t minPsmCount[75]; float avgPsmVoltage[75]; float minPsmVoltage[75]; uint32_t MmHubPadding[8]; // SMU internal use } AvfsDebugTable_t; typedef struct { uint8_t AvfsVersion; uint8_t Padding; uint8_t AvfsEn[AVFS_VOLTAGE_COUNT]; uint8_t OverrideVFT[AVFS_VOLTAGE_COUNT]; uint8_t OverrideAvfsGb[AVFS_VOLTAGE_COUNT]; uint8_t OverrideTemperatures[AVFS_VOLTAGE_COUNT]; uint8_t OverrideVInversion[AVFS_VOLTAGE_COUNT]; uint8_t OverrideP2V[AVFS_VOLTAGE_COUNT]; uint8_t OverrideP2VCharzFreq[AVFS_VOLTAGE_COUNT]; int32_t VFT0_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 int32_t VFT0_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 int32_t VFT0_b[AVFS_VOLTAGE_COUNT]; // Q32 int32_t VFT1_m1[AVFS_VOLTAGE_COUNT]; // Q8.16 int32_t VFT1_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 int32_t VFT1_b[AVFS_VOLTAGE_COUNT]; // Q32 int32_t VFT2_m1[AVFS_VOLTAGE_COUNT]; // Q8.16 int32_t VFT2_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 int32_t VFT2_b[AVFS_VOLTAGE_COUNT]; // Q32 int32_t AvfsGb0_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 int32_t AvfsGb0_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 int32_t AvfsGb0_b[AVFS_VOLTAGE_COUNT]; // Q32 int32_t AcBtcGb_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 int32_t AcBtcGb_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 int32_t AcBtcGb_b[AVFS_VOLTAGE_COUNT]; // Q32 uint32_t AvfsTempCold[AVFS_VOLTAGE_COUNT]; uint32_t AvfsTempMid[AVFS_VOLTAGE_COUNT]; uint32_t AvfsTempHot[AVFS_VOLTAGE_COUNT]; uint32_t VInversion[AVFS_VOLTAGE_COUNT]; // in mV with 2 fractional bits int32_t P2V_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 int32_t P2V_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 int32_t P2V_b[AVFS_VOLTAGE_COUNT]; // Q32 uint32_t P2VCharzFreq[AVFS_VOLTAGE_COUNT]; // in 10KHz units uint32_t EnabledAvfsModules[3]; uint32_t MmHubPadding[8]; // SMU internal use } AvfsFuseOverride_t; typedef struct { uint8_t Gfx_ActiveHystLimit; uint8_t Gfx_IdleHystLimit; uint8_t Gfx_FPS; uint8_t Gfx_MinActiveFreqType; uint8_t Gfx_BoosterFreqType; uint8_t Gfx_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock. uint8_t Gfx_UseRlcBusy; uint8_t PaddingGfx[3]; uint16_t Gfx_MinActiveFreq; // MHz uint16_t Gfx_BoosterFreq; // MHz uint16_t Gfx_PD_Data_time_constant; // Time constant of PD controller in ms uint32_t Gfx_PD_Data_limit_a; // Q16 uint32_t Gfx_PD_Data_limit_b; // Q16 uint32_t Gfx_PD_Data_limit_c; // Q16 uint32_t Gfx_PD_Data_error_coeff; // Q16 uint32_t Gfx_PD_Data_error_rate_coeff; // Q16 uint8_t Mem_ActiveHystLimit; uint8_t Mem_IdleHystLimit; uint8_t Mem_FPS; uint8_t Mem_MinActiveFreqType; uint8_t Mem_BoosterFreqType; uint8_t Mem_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock. uint8_t Mem_UseRlcBusy; uint8_t PaddingMem[3]; uint16_t Mem_MinActiveFreq; // MHz uint16_t Mem_BoosterFreq; // MHz uint16_t Mem_PD_Data_time_constant; // Time constant of PD controller in ms uint32_t Mem_PD_Data_limit_a; // Q16 uint32_t Mem_PD_Data_limit_b; // Q16 uint32_t Mem_PD_Data_limit_c; // Q16 uint32_t Mem_PD_Data_error_coeff; // Q16 uint32_t Mem_PD_Data_error_rate_coeff; // Q16 uint32_t Mem_UpThreshold_Limit; // Q16 uint8_t Mem_UpHystLimit; uint8_t Mem_DownHystLimit; uint16_t Mem_Fps; uint32_t BusyThreshold; // Q16 uint32_t BusyHyst; uint32_t IdleHyst; uint32_t MmHubPadding[8]; // SMU internal use } DpmActivityMonitorCoeffInt_t; // These defines are used with the following messages: // SMC_MSG_TransferTableDram2Smu // SMC_MSG_TransferTableSmu2Dram #define TABLE_PPTABLE 0 #define TABLE_AVFS 1 #define TABLE_AVFS_PSM_DEBUG 2 #define TABLE_AVFS_FUSE_OVERRIDE 3 #define TABLE_PMSTATUSLOG 4 #define TABLE_SMU_METRICS 5 #define TABLE_DRIVER_SMU_CONFIG 6 #define TABLE_OVERDRIVE 7 #define TABLE_WAFL_XGMI_TOPOLOGY 8 #define TABLE_I2C_COMMANDS 9 #define TABLE_ACTIVITY_MONITOR_COEFF 10 #define TABLE_COUNT 11 // These defines are used with the SMC_MSG_SetUclkFastSwitch message. typedef enum { DF_SWITCH_TYPE_FAST = 0, DF_SWITCH_TYPE_SLOW, DF_SWITCH_TYPE_COUNT, } DF_SWITCH_TYPE_e; typedef enum { DRAM_BIT_WIDTH_DISABLED = 0, DRAM_BIT_WIDTH_X_8, DRAM_BIT_WIDTH_X_16, DRAM_BIT_WIDTH_X_32, DRAM_BIT_WIDTH_X_64, // NOT USED. DRAM_BIT_WIDTH_X_128, DRAM_BIT_WIDTH_COUNT, } DRAM_BIT_WIDTH_TYPE_e; #define REMOVE_FMAX_MARGIN_BIT 0x0 #define REMOVE_DCTOL_MARGIN_BIT 0x1 #define REMOVE_PLATFORM_MARGIN_BIT 0x2 #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1