Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Joel Stanley | 950 | 95.57% | 1 | 33.33% |
Daniel Vetter | 34 | 3.42% | 1 | 33.33% |
Guenter Roeck | 10 | 1.01% | 1 | 33.33% |
Total | 994 | 3 |
// SPDX-License-Identifier: GPL-2.0+ // Copyright 2018 IBM Corporation #include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/irq.h> #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_reserved_mem.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/reset.h> #include <drm/drm_atomic_helper.h> #include <drm/drm_crtc_helper.h> #include <drm/drm_device.h> #include <drm/drm_fb_cma_helper.h> #include <drm/drm_fb_helper.h> #include <drm/drm_gem_cma_helper.h> #include <drm/drm_gem_framebuffer_helper.h> #include <drm/drm_probe_helper.h> #include <drm/drm_simple_kms_helper.h> #include <drm/drm_vblank.h> #include <drm/drm_drv.h> #include "aspeed_gfx.h" /** * DOC: ASPEED GFX Driver * * This driver is for the ASPEED BMC SoC's 'GFX' display hardware, also called * the 'SOC Display Controller' in the datasheet. This driver runs on the ARM * based BMC systems, unlike the ast driver which runs on a host CPU and is for * a PCIe graphics device. * * The AST2500 supports a total of 3 output paths: * * 1. VGA output, the output target can choose either or both to the DAC * or DVO interface. * * 2. Graphics CRT output, the output target can choose either or both to * the DAC or DVO interface. * * 3. Video input from DVO, the video input can be used for video engine * capture or DAC display output. * * Output options are selected in SCU2C. * * The "VGA mode" device is the PCI attached controller. The "Graphics CRT" * is the ARM's internal display controller. * * The driver only supports a simple configuration consisting of a 40MHz * pixel clock, fixed by hardware limitations, and the VGA output path. * * The driver was written with the 'AST2500 Software Programming Guide' v17, * which is available under NDA from ASPEED. */ static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs = { .fb_create = drm_gem_fb_create, .atomic_check = drm_atomic_helper_check, .atomic_commit = drm_atomic_helper_commit, }; static void aspeed_gfx_setup_mode_config(struct drm_device *drm) { drm_mode_config_init(drm); drm->mode_config.min_width = 0; drm->mode_config.min_height = 0; drm->mode_config.max_width = 800; drm->mode_config.max_height = 600; drm->mode_config.funcs = &aspeed_gfx_mode_config_funcs; } static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data) { struct drm_device *drm = data; struct aspeed_gfx *priv = to_aspeed_gfx(drm); u32 reg; reg = readl(priv->base + CRT_CTRL1); if (reg & CRT_CTRL_VERTICAL_INTR_STS) { drm_crtc_handle_vblank(&priv->pipe.crtc); writel(reg, priv->base + CRT_CTRL1); return IRQ_HANDLED; } return IRQ_NONE; } static int aspeed_gfx_load(struct drm_device *drm) { struct platform_device *pdev = to_platform_device(drm->dev); struct aspeed_gfx *priv = to_aspeed_gfx(drm); struct resource *res; int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); priv->base = devm_ioremap_resource(drm->dev, res); if (IS_ERR(priv->base)) return PTR_ERR(priv->base); priv->scu = syscon_regmap_lookup_by_compatible("aspeed,ast2500-scu"); if (IS_ERR(priv->scu)) { dev_err(&pdev->dev, "failed to find SCU regmap\n"); return PTR_ERR(priv->scu); } ret = of_reserved_mem_device_init(drm->dev); if (ret) { dev_err(&pdev->dev, "failed to initialize reserved mem: %d\n", ret); return ret; } ret = dma_set_mask_and_coherent(drm->dev, DMA_BIT_MASK(32)); if (ret) { dev_err(&pdev->dev, "failed to set DMA mask: %d\n", ret); return ret; } priv->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL); if (IS_ERR(priv->rst)) { dev_err(&pdev->dev, "missing or invalid reset controller device tree entry"); return PTR_ERR(priv->rst); } reset_control_deassert(priv->rst); priv->clk = devm_clk_get(drm->dev, NULL); if (IS_ERR(priv->clk)) { dev_err(&pdev->dev, "missing or invalid clk device tree entry"); return PTR_ERR(priv->clk); } clk_prepare_enable(priv->clk); /* Sanitize control registers */ writel(0, priv->base + CRT_CTRL1); writel(0, priv->base + CRT_CTRL2); aspeed_gfx_setup_mode_config(drm); ret = drm_vblank_init(drm, 1); if (ret < 0) { dev_err(drm->dev, "Failed to initialise vblank\n"); return ret; } ret = aspeed_gfx_create_output(drm); if (ret < 0) { dev_err(drm->dev, "Failed to create outputs\n"); return ret; } ret = aspeed_gfx_create_pipe(drm); if (ret < 0) { dev_err(drm->dev, "Cannot setup simple display pipe\n"); return ret; } ret = devm_request_irq(drm->dev, platform_get_irq(pdev, 0), aspeed_gfx_irq_handler, 0, "aspeed gfx", drm); if (ret < 0) { dev_err(drm->dev, "Failed to install IRQ handler\n"); return ret; } drm_mode_config_reset(drm); return 0; } static void aspeed_gfx_unload(struct drm_device *drm) { drm_kms_helper_poll_fini(drm); drm_mode_config_cleanup(drm); } DEFINE_DRM_GEM_CMA_FOPS(fops); static struct drm_driver aspeed_gfx_driver = { .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, .gem_create_object = drm_cma_gem_create_object_default_funcs, .dumb_create = drm_gem_cma_dumb_create, .prime_handle_to_fd = drm_gem_prime_handle_to_fd, .prime_fd_to_handle = drm_gem_prime_fd_to_handle, .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table, .gem_prime_mmap = drm_gem_prime_mmap, .fops = &fops, .name = "aspeed-gfx-drm", .desc = "ASPEED GFX DRM", .date = "20180319", .major = 1, .minor = 0, }; static const struct of_device_id aspeed_gfx_match[] = { { .compatible = "aspeed,ast2500-gfx" }, { } }; static int aspeed_gfx_probe(struct platform_device *pdev) { struct aspeed_gfx *priv; int ret; priv = devm_drm_dev_alloc(&pdev->dev, &aspeed_gfx_driver, struct aspeed_gfx, drm); if (IS_ERR(priv)) return PTR_ERR(priv); ret = aspeed_gfx_load(&priv->drm); if (ret) return ret; ret = drm_dev_register(&priv->drm, 0); if (ret) goto err_unload; drm_fbdev_generic_setup(&priv->drm, 32); return 0; err_unload: aspeed_gfx_unload(&priv->drm); return ret; } static int aspeed_gfx_remove(struct platform_device *pdev) { struct drm_device *drm = platform_get_drvdata(pdev); drm_dev_unregister(drm); aspeed_gfx_unload(drm); return 0; } static struct platform_driver aspeed_gfx_platform_driver = { .probe = aspeed_gfx_probe, .remove = aspeed_gfx_remove, .driver = { .name = "aspeed_gfx", .of_match_table = aspeed_gfx_match, }, }; module_platform_driver(aspeed_gfx_platform_driver); MODULE_AUTHOR("Joel Stanley <joel@jms.id.au>"); MODULE_DESCRIPTION("ASPEED BMC DRM/KMS driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1