Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Andreas Klinger | 2245 | 99.87% | 6 | 75.00% |
Thomas Gleixner | 2 | 0.09% | 1 | 12.50% |
simran singhal | 1 | 0.04% | 1 | 12.50% |
Total | 2248 | 8 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * HX711: analog to digital converter for weight sensor module * * Copyright (c) 2016 Andreas Klinger <ak@it-klinger.de> */ #include <linux/err.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/property.h> #include <linux/slab.h> #include <linux/sched.h> #include <linux/delay.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/iio/buffer.h> #include <linux/iio/trigger_consumer.h> #include <linux/iio/triggered_buffer.h> #include <linux/gpio/consumer.h> #include <linux/regulator/consumer.h> /* gain to pulse and scale conversion */ #define HX711_GAIN_MAX 3 #define HX711_RESET_GAIN 128 struct hx711_gain_to_scale { int gain; int gain_pulse; int scale; int channel; }; /* * .scale depends on AVDD which in turn is known as soon as the regulator * is available * therefore we set .scale in hx711_probe() * * channel A in documentation is channel 0 in source code * channel B in documentation is channel 1 in source code */ static struct hx711_gain_to_scale hx711_gain_to_scale[HX711_GAIN_MAX] = { { 128, 1, 0, 0 }, { 32, 2, 0, 1 }, { 64, 3, 0, 0 } }; static int hx711_get_gain_to_pulse(int gain) { int i; for (i = 0; i < HX711_GAIN_MAX; i++) if (hx711_gain_to_scale[i].gain == gain) return hx711_gain_to_scale[i].gain_pulse; return 1; } static int hx711_get_gain_to_scale(int gain) { int i; for (i = 0; i < HX711_GAIN_MAX; i++) if (hx711_gain_to_scale[i].gain == gain) return hx711_gain_to_scale[i].scale; return 0; } static int hx711_get_scale_to_gain(int scale) { int i; for (i = 0; i < HX711_GAIN_MAX; i++) if (hx711_gain_to_scale[i].scale == scale) return hx711_gain_to_scale[i].gain; return -EINVAL; } struct hx711_data { struct device *dev; struct gpio_desc *gpiod_pd_sck; struct gpio_desc *gpiod_dout; struct regulator *reg_avdd; int gain_set; /* gain set on device */ int gain_chan_a; /* gain for channel A */ struct mutex lock; /* * triggered buffer * 2x32-bit channel + 64-bit timestamp */ u32 buffer[4]; /* * delay after a rising edge on SCK until the data is ready DOUT * this is dependent on the hx711 where the datasheet tells a * maximum value of 100 ns * but also on potential parasitic capacities on the wiring */ u32 data_ready_delay_ns; u32 clock_frequency; }; static int hx711_cycle(struct hx711_data *hx711_data) { unsigned long flags; /* * if preempted for more then 60us while PD_SCK is high: * hx711 is going in reset * ==> measuring is false */ local_irq_save(flags); gpiod_set_value(hx711_data->gpiod_pd_sck, 1); /* * wait until DOUT is ready * it turned out that parasitic capacities are extending the time * until DOUT has reached it's value */ ndelay(hx711_data->data_ready_delay_ns); /* * here we are not waiting for 0.2 us as suggested by the datasheet, * because the oscilloscope showed in a test scenario * at least 1.15 us for PD_SCK high (T3 in datasheet) * and 0.56 us for PD_SCK low on TI Sitara with 800 MHz */ gpiod_set_value(hx711_data->gpiod_pd_sck, 0); local_irq_restore(flags); /* * make it a square wave for addressing cases with capacitance on * PC_SCK */ ndelay(hx711_data->data_ready_delay_ns); /* sample as late as possible */ return gpiod_get_value(hx711_data->gpiod_dout); } static int hx711_read(struct hx711_data *hx711_data) { int i, ret; int value = 0; int val = gpiod_get_value(hx711_data->gpiod_dout); /* we double check if it's really down */ if (val) return -EIO; for (i = 0; i < 24; i++) { value <<= 1; ret = hx711_cycle(hx711_data); if (ret) value++; } value ^= 0x800000; for (i = 0; i < hx711_get_gain_to_pulse(hx711_data->gain_set); i++) hx711_cycle(hx711_data); return value; } static int hx711_wait_for_ready(struct hx711_data *hx711_data) { int i, val; /* * in some rare cases the reset takes quite a long time * especially when the channel is changed. * Allow up to one second for it */ for (i = 0; i < 100; i++) { val = gpiod_get_value(hx711_data->gpiod_dout); if (!val) break; /* sleep at least 10 ms */ msleep(10); } if (val) return -EIO; return 0; } static int hx711_reset(struct hx711_data *hx711_data) { int val = hx711_wait_for_ready(hx711_data); if (val) { /* * an examination with the oszilloscope indicated * that the first value read after the reset is not stable * if we reset too short; * the shorter the reset cycle * the less reliable the first value after reset is; * there were no problems encountered with a value * of 10 ms or higher */ gpiod_set_value(hx711_data->gpiod_pd_sck, 1); msleep(10); gpiod_set_value(hx711_data->gpiod_pd_sck, 0); val = hx711_wait_for_ready(hx711_data); /* after a reset the gain is 128 */ hx711_data->gain_set = HX711_RESET_GAIN; } return val; } static int hx711_set_gain_for_channel(struct hx711_data *hx711_data, int chan) { int ret; if (chan == 0) { if (hx711_data->gain_set == 32) { hx711_data->gain_set = hx711_data->gain_chan_a; ret = hx711_read(hx711_data); if (ret < 0) return ret; ret = hx711_wait_for_ready(hx711_data); if (ret) return ret; } } else { if (hx711_data->gain_set != 32) { hx711_data->gain_set = 32; ret = hx711_read(hx711_data); if (ret < 0) return ret; ret = hx711_wait_for_ready(hx711_data); if (ret) return ret; } } return 0; } static int hx711_reset_read(struct hx711_data *hx711_data, int chan) { int ret; int val; /* * hx711_reset() must be called from here * because it could be calling hx711_read() by itself */ if (hx711_reset(hx711_data)) { dev_err(hx711_data->dev, "reset failed!"); return -EIO; } ret = hx711_set_gain_for_channel(hx711_data, chan); if (ret < 0) return ret; val = hx711_read(hx711_data); return val; } static int hx711_read_raw(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, int *val, int *val2, long mask) { struct hx711_data *hx711_data = iio_priv(indio_dev); switch (mask) { case IIO_CHAN_INFO_RAW: mutex_lock(&hx711_data->lock); *val = hx711_reset_read(hx711_data, chan->channel); mutex_unlock(&hx711_data->lock); if (*val < 0) return *val; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: *val = 0; mutex_lock(&hx711_data->lock); *val2 = hx711_get_gain_to_scale(hx711_data->gain_set); mutex_unlock(&hx711_data->lock); return IIO_VAL_INT_PLUS_NANO; default: return -EINVAL; } } static int hx711_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, int val2, long mask) { struct hx711_data *hx711_data = iio_priv(indio_dev); int ret; int gain; switch (mask) { case IIO_CHAN_INFO_SCALE: /* * a scale greater than 1 mV per LSB is not possible * with the HX711, therefore val must be 0 */ if (val != 0) return -EINVAL; mutex_lock(&hx711_data->lock); gain = hx711_get_scale_to_gain(val2); if (gain < 0) { mutex_unlock(&hx711_data->lock); return gain; } if (gain != hx711_data->gain_set) { hx711_data->gain_set = gain; if (gain != 32) hx711_data->gain_chan_a = gain; ret = hx711_read(hx711_data); if (ret < 0) { mutex_unlock(&hx711_data->lock); return ret; } } mutex_unlock(&hx711_data->lock); return 0; default: return -EINVAL; } return 0; } static int hx711_write_raw_get_fmt(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, long mask) { return IIO_VAL_INT_PLUS_NANO; } static irqreturn_t hx711_trigger(int irq, void *p) { struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct hx711_data *hx711_data = iio_priv(indio_dev); int i, j = 0; mutex_lock(&hx711_data->lock); memset(hx711_data->buffer, 0, sizeof(hx711_data->buffer)); for (i = 0; i < indio_dev->masklength; i++) { if (!test_bit(i, indio_dev->active_scan_mask)) continue; hx711_data->buffer[j] = hx711_reset_read(hx711_data, indio_dev->channels[i].channel); j++; } iio_push_to_buffers_with_timestamp(indio_dev, hx711_data->buffer, pf->timestamp); mutex_unlock(&hx711_data->lock); iio_trigger_notify_done(indio_dev->trig); return IRQ_HANDLED; } static ssize_t hx711_scale_available_show(struct device *dev, struct device_attribute *attr, char *buf) { struct iio_dev_attr *iio_attr = to_iio_dev_attr(attr); int channel = iio_attr->address; int i, len = 0; for (i = 0; i < HX711_GAIN_MAX; i++) if (hx711_gain_to_scale[i].channel == channel) len += sprintf(buf + len, "0.%09d ", hx711_gain_to_scale[i].scale); len += sprintf(buf + len, "\n"); return len; } static IIO_DEVICE_ATTR(in_voltage0_scale_available, S_IRUGO, hx711_scale_available_show, NULL, 0); static IIO_DEVICE_ATTR(in_voltage1_scale_available, S_IRUGO, hx711_scale_available_show, NULL, 1); static struct attribute *hx711_attributes[] = { &iio_dev_attr_in_voltage0_scale_available.dev_attr.attr, &iio_dev_attr_in_voltage1_scale_available.dev_attr.attr, NULL, }; static const struct attribute_group hx711_attribute_group = { .attrs = hx711_attributes, }; static const struct iio_info hx711_iio_info = { .read_raw = hx711_read_raw, .write_raw = hx711_write_raw, .write_raw_get_fmt = hx711_write_raw_get_fmt, .attrs = &hx711_attribute_group, }; static const struct iio_chan_spec hx711_chan_spec[] = { { .type = IIO_VOLTAGE, .channel = 0, .indexed = 1, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), .scan_index = 0, .scan_type = { .sign = 'u', .realbits = 24, .storagebits = 32, .endianness = IIO_CPU, }, }, { .type = IIO_VOLTAGE, .channel = 1, .indexed = 1, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), .scan_index = 1, .scan_type = { .sign = 'u', .realbits = 24, .storagebits = 32, .endianness = IIO_CPU, }, }, IIO_CHAN_SOFT_TIMESTAMP(2), }; static int hx711_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; struct hx711_data *hx711_data; struct iio_dev *indio_dev; int ret; int i; indio_dev = devm_iio_device_alloc(dev, sizeof(struct hx711_data)); if (!indio_dev) { dev_err(dev, "failed to allocate IIO device\n"); return -ENOMEM; } hx711_data = iio_priv(indio_dev); hx711_data->dev = dev; mutex_init(&hx711_data->lock); /* * PD_SCK stands for power down and serial clock input of HX711 * in the driver it is an output */ hx711_data->gpiod_pd_sck = devm_gpiod_get(dev, "sck", GPIOD_OUT_LOW); if (IS_ERR(hx711_data->gpiod_pd_sck)) { dev_err(dev, "failed to get sck-gpiod: err=%ld\n", PTR_ERR(hx711_data->gpiod_pd_sck)); return PTR_ERR(hx711_data->gpiod_pd_sck); } /* * DOUT stands for serial data output of HX711 * for the driver it is an input */ hx711_data->gpiod_dout = devm_gpiod_get(dev, "dout", GPIOD_IN); if (IS_ERR(hx711_data->gpiod_dout)) { dev_err(dev, "failed to get dout-gpiod: err=%ld\n", PTR_ERR(hx711_data->gpiod_dout)); return PTR_ERR(hx711_data->gpiod_dout); } hx711_data->reg_avdd = devm_regulator_get(dev, "avdd"); if (IS_ERR(hx711_data->reg_avdd)) return PTR_ERR(hx711_data->reg_avdd); ret = regulator_enable(hx711_data->reg_avdd); if (ret < 0) return ret; /* * with * full scale differential input range: AVDD / GAIN * full scale output data: 2^24 * we can say: * AVDD / GAIN = 2^24 * therefore: * 1 LSB = AVDD / GAIN / 2^24 * AVDD is in uV, but we need 10^-9 mV * approximately to fit into a 32 bit number: * 1 LSB = (AVDD * 100) / GAIN / 1678 [10^-9 mV] */ ret = regulator_get_voltage(hx711_data->reg_avdd); if (ret < 0) goto error_regulator; /* we need 10^-9 mV */ ret *= 100; for (i = 0; i < HX711_GAIN_MAX; i++) hx711_gain_to_scale[i].scale = ret / hx711_gain_to_scale[i].gain / 1678; hx711_data->gain_set = 128; hx711_data->gain_chan_a = 128; hx711_data->clock_frequency = 400000; ret = of_property_read_u32(np, "clock-frequency", &hx711_data->clock_frequency); /* * datasheet says the high level of PD_SCK has a maximum duration * of 50 microseconds */ if (hx711_data->clock_frequency < 20000) { dev_warn(dev, "clock-frequency too low - assuming 400 kHz\n"); hx711_data->clock_frequency = 400000; } hx711_data->data_ready_delay_ns = 1000000000 / hx711_data->clock_frequency; platform_set_drvdata(pdev, indio_dev); indio_dev->name = "hx711"; indio_dev->dev.parent = &pdev->dev; indio_dev->info = &hx711_iio_info; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = hx711_chan_spec; indio_dev->num_channels = ARRAY_SIZE(hx711_chan_spec); ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time, hx711_trigger, NULL); if (ret < 0) { dev_err(dev, "setup of iio triggered buffer failed\n"); goto error_regulator; } ret = iio_device_register(indio_dev); if (ret < 0) { dev_err(dev, "Couldn't register the device\n"); goto error_buffer; } return 0; error_buffer: iio_triggered_buffer_cleanup(indio_dev); error_regulator: regulator_disable(hx711_data->reg_avdd); return ret; } static int hx711_remove(struct platform_device *pdev) { struct hx711_data *hx711_data; struct iio_dev *indio_dev; indio_dev = platform_get_drvdata(pdev); hx711_data = iio_priv(indio_dev); iio_device_unregister(indio_dev); iio_triggered_buffer_cleanup(indio_dev); regulator_disable(hx711_data->reg_avdd); return 0; } static const struct of_device_id of_hx711_match[] = { { .compatible = "avia,hx711", }, {}, }; MODULE_DEVICE_TABLE(of, of_hx711_match); static struct platform_driver hx711_driver = { .probe = hx711_probe, .remove = hx711_remove, .driver = { .name = "hx711-gpio", .of_match_table = of_hx711_match, }, }; module_platform_driver(hx711_driver); MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>"); MODULE_DESCRIPTION("HX711 bitbanging driver - ADC for weight cells"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:hx711-gpio");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1