Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
David Woodhouse | 971 | 97.59% | 1 | 9.09% |
Frans Klaver | 9 | 0.90% | 1 | 9.09% |
Tejun Heo | 3 | 0.30% | 1 | 9.09% |
Dmitry Eremin-Solenikov | 3 | 0.30% | 2 | 18.18% |
Axel Lin | 2 | 0.20% | 1 | 9.09% |
Artem B. Bityutskiy | 2 | 0.20% | 1 | 9.09% |
Christoph Hellwig | 2 | 0.20% | 1 | 9.09% |
Rafał Miłecki | 1 | 0.10% | 1 | 9.09% |
Jamie Iles | 1 | 0.10% | 1 | 9.09% |
Arvind Yadav | 1 | 0.10% | 1 | 9.09% |
Total | 995 | 11 |
/* * drivers/mtd/maps/intel_vr_nor.c * * An MTD map driver for a NOR flash bank on the Expansion Bus of the Intel * Vermilion Range chipset. * * The Vermilion Range Expansion Bus supports four chip selects, each of which * has 64MiB of address space. The 2nd BAR of the Expansion Bus PCI Device * is a 256MiB memory region containing the address spaces for all four of the * chip selects, with start addresses hardcoded on 64MiB boundaries. * * This map driver only supports NOR flash on chip select 0. The buswidth * (either 8 bits or 16 bits) is determined by reading the Expansion Bus Timing * and Control Register for Chip Select 0 (EXP_TIMING_CS0). This driver does * not modify the value in the EXP_TIMING_CS0 register except to enable writing * and disable boot acceleration. The timing parameters in the register are * assumed to have been properly initialized by the BIOS. The reset default * timing parameters are maximally conservative (slow), so access to the flash * will be slower than it should be if the BIOS has not initialized the timing * parameters. * * Author: Andy Lowe <alowe@mvista.com> * * 2006 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/slab.h> #include <linux/pci.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> #include <linux/mtd/partitions.h> #include <linux/mtd/cfi.h> #include <linux/mtd/flashchip.h> #define DRV_NAME "vr_nor" struct vr_nor_mtd { void __iomem *csr_base; struct map_info map; struct mtd_info *info; struct pci_dev *dev; }; /* Expansion Bus Configuration and Status Registers are in BAR 0 */ #define EXP_CSR_MBAR 0 /* Expansion Bus Memory Window is BAR 1 */ #define EXP_WIN_MBAR 1 /* Maximum address space for Chip Select 0 is 64MiB */ #define CS0_SIZE 0x04000000 /* Chip Select 0 is at offset 0 in the Memory Window */ #define CS0_START 0x0 /* Chip Select 0 Timing Register is at offset 0 in CSR */ #define EXP_TIMING_CS0 0x00 #define TIMING_CS_EN (1 << 31) /* Chip Select Enable */ #define TIMING_BOOT_ACCEL_DIS (1 << 8) /* Boot Acceleration Disable */ #define TIMING_WR_EN (1 << 1) /* Write Enable */ #define TIMING_BYTE_EN (1 << 0) /* 8-bit vs 16-bit bus */ #define TIMING_MASK 0x3FFF0000 static void vr_nor_destroy_partitions(struct vr_nor_mtd *p) { mtd_device_unregister(p->info); } static int vr_nor_init_partitions(struct vr_nor_mtd *p) { /* register the flash bank */ /* partition the flash bank */ return mtd_device_register(p->info, NULL, 0); } static void vr_nor_destroy_mtd_setup(struct vr_nor_mtd *p) { map_destroy(p->info); } static int vr_nor_mtd_setup(struct vr_nor_mtd *p) { static const char * const probe_types[] = { "cfi_probe", "jedec_probe", NULL }; const char * const *type; for (type = probe_types; !p->info && *type; type++) p->info = do_map_probe(*type, &p->map); if (!p->info) return -ENODEV; p->info->dev.parent = &p->dev->dev; return 0; } static void vr_nor_destroy_maps(struct vr_nor_mtd *p) { unsigned int exp_timing_cs0; /* write-protect the flash bank */ exp_timing_cs0 = readl(p->csr_base + EXP_TIMING_CS0); exp_timing_cs0 &= ~TIMING_WR_EN; writel(exp_timing_cs0, p->csr_base + EXP_TIMING_CS0); /* unmap the flash window */ iounmap(p->map.virt); /* unmap the csr window */ iounmap(p->csr_base); } /* * Initialize the map_info structure and map the flash. * Returns 0 on success, nonzero otherwise. */ static int vr_nor_init_maps(struct vr_nor_mtd *p) { unsigned long csr_phys, csr_len; unsigned long win_phys, win_len; unsigned int exp_timing_cs0; int err; csr_phys = pci_resource_start(p->dev, EXP_CSR_MBAR); csr_len = pci_resource_len(p->dev, EXP_CSR_MBAR); win_phys = pci_resource_start(p->dev, EXP_WIN_MBAR); win_len = pci_resource_len(p->dev, EXP_WIN_MBAR); if (!csr_phys || !csr_len || !win_phys || !win_len) return -ENODEV; if (win_len < (CS0_START + CS0_SIZE)) return -ENXIO; p->csr_base = ioremap(csr_phys, csr_len); if (!p->csr_base) return -ENOMEM; exp_timing_cs0 = readl(p->csr_base + EXP_TIMING_CS0); if (!(exp_timing_cs0 & TIMING_CS_EN)) { dev_warn(&p->dev->dev, "Expansion Bus Chip Select 0 " "is disabled.\n"); err = -ENODEV; goto release; } if ((exp_timing_cs0 & TIMING_MASK) == TIMING_MASK) { dev_warn(&p->dev->dev, "Expansion Bus Chip Select 0 " "is configured for maximally slow access times.\n"); } p->map.name = DRV_NAME; p->map.bankwidth = (exp_timing_cs0 & TIMING_BYTE_EN) ? 1 : 2; p->map.phys = win_phys + CS0_START; p->map.size = CS0_SIZE; p->map.virt = ioremap(p->map.phys, p->map.size); if (!p->map.virt) { err = -ENOMEM; goto release; } simple_map_init(&p->map); /* Enable writes to flash bank */ exp_timing_cs0 |= TIMING_BOOT_ACCEL_DIS | TIMING_WR_EN; writel(exp_timing_cs0, p->csr_base + EXP_TIMING_CS0); return 0; release: iounmap(p->csr_base); return err; } static const struct pci_device_id vr_nor_pci_ids[] = { {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x500D)}, {0,} }; static void vr_nor_pci_remove(struct pci_dev *dev) { struct vr_nor_mtd *p = pci_get_drvdata(dev); vr_nor_destroy_partitions(p); vr_nor_destroy_mtd_setup(p); vr_nor_destroy_maps(p); kfree(p); pci_release_regions(dev); pci_disable_device(dev); } static int vr_nor_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { struct vr_nor_mtd *p = NULL; unsigned int exp_timing_cs0; int err; err = pci_enable_device(dev); if (err) goto out; err = pci_request_regions(dev, DRV_NAME); if (err) goto disable_dev; p = kzalloc(sizeof(*p), GFP_KERNEL); err = -ENOMEM; if (!p) goto release; p->dev = dev; err = vr_nor_init_maps(p); if (err) goto release; err = vr_nor_mtd_setup(p); if (err) goto destroy_maps; err = vr_nor_init_partitions(p); if (err) goto destroy_mtd_setup; pci_set_drvdata(dev, p); return 0; destroy_mtd_setup: map_destroy(p->info); destroy_maps: /* write-protect the flash bank */ exp_timing_cs0 = readl(p->csr_base + EXP_TIMING_CS0); exp_timing_cs0 &= ~TIMING_WR_EN; writel(exp_timing_cs0, p->csr_base + EXP_TIMING_CS0); /* unmap the flash window */ iounmap(p->map.virt); /* unmap the csr window */ iounmap(p->csr_base); release: kfree(p); pci_release_regions(dev); disable_dev: pci_disable_device(dev); out: return err; } static struct pci_driver vr_nor_pci_driver = { .name = DRV_NAME, .probe = vr_nor_pci_probe, .remove = vr_nor_pci_remove, .id_table = vr_nor_pci_ids, }; module_pci_driver(vr_nor_pci_driver); MODULE_AUTHOR("Andy Lowe"); MODULE_DESCRIPTION("MTD map driver for NOR flash on Intel Vermilion Range"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, vr_nor_pci_ids);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1