| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Kalle Valo | 4466 | 99.82% | 1 | 25.00% |
| Govind Singh | 3 | 0.07% | 1 | 25.00% |
| Anilkumar Kolli | 3 | 0.07% | 1 | 25.00% |
| Gustavo A. R. Silva | 2 | 0.04% | 1 | 25.00% |
| Total | 4474 | 4 |
/* SPDX-License-Identifier: BSD-3-Clause-Clear */ /* * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. */ #include "core.h" #ifndef ATH11K_HAL_DESC_H #define ATH11K_HAL_DESC_H #define BUFFER_ADDR_INFO0_ADDR GENMASK(31, 0) #define BUFFER_ADDR_INFO1_ADDR GENMASK(7, 0) #define BUFFER_ADDR_INFO1_RET_BUF_MGR GENMASK(10, 8) #define BUFFER_ADDR_INFO1_SW_COOKIE GENMASK(31, 11) struct ath11k_buffer_addr { u32 info0; u32 info1; } __packed; /* ath11k_buffer_addr * * info0 * Address (lower 32 bits) of the msdu buffer or msdu extension * descriptor or Link descriptor * * addr * Address (upper 8 bits) of the msdu buffer or msdu extension * descriptor or Link descriptor * * return_buffer_manager (RBM) * Consumer: WBM * Producer: SW/FW * Indicates to which buffer manager the buffer or MSDU_EXTENSION * descriptor or link descriptor that is being pointed to shall be * returned after the frame has been processed. It is used by WBM * for routing purposes. * * Values are defined in enum %HAL_RX_BUF_RBM_ * * sw_buffer_cookie * Cookie field exclusively used by SW. HW ignores the contents, * accept that it passes the programmed value on to other * descriptors together with the physical address. * * Field can be used by SW to for example associate the buffers * physical address with the virtual address. */ enum hal_tlv_tag { HAL_MACTX_CBF_START = 0 /* 0x0 */, HAL_PHYRX_DATA = 1 /* 0x1 */, HAL_PHYRX_CBF_DATA_RESP = 2 /* 0x2 */, HAL_PHYRX_ABORT_REQUEST = 3 /* 0x3 */, HAL_PHYRX_USER_ABORT_NOTIFICATION = 4 /* 0x4 */, HAL_MACTX_DATA_RESP = 5 /* 0x5 */, HAL_MACTX_CBF_DATA = 6 /* 0x6 */, HAL_MACTX_CBF_DONE = 7 /* 0x7 */, HAL_MACRX_CBF_READ_REQUEST = 8 /* 0x8 */, HAL_MACRX_CBF_DATA_REQUEST = 9 /* 0x9 */, HAL_MACRX_EXPECT_NDP_RECEPTION = 10 /* 0xa */, HAL_MACRX_FREEZE_CAPTURE_CHANNEL = 11 /* 0xb */, HAL_MACRX_NDP_TIMEOUT = 12 /* 0xc */, HAL_MACRX_ABORT_ACK = 13 /* 0xd */, HAL_MACRX_REQ_IMPLICIT_FB = 14 /* 0xe */, HAL_MACRX_CHAIN_MASK = 15 /* 0xf */, HAL_MACRX_NAP_USER = 16 /* 0x10 */, HAL_MACRX_ABORT_REQUEST = 17 /* 0x11 */, HAL_PHYTX_OTHER_TRANSMIT_INFO16 = 18 /* 0x12 */, HAL_PHYTX_ABORT_ACK = 19 /* 0x13 */, HAL_PHYTX_ABORT_REQUEST = 20 /* 0x14 */, HAL_PHYTX_PKT_END = 21 /* 0x15 */, HAL_PHYTX_PPDU_HEADER_INFO_REQUEST = 22 /* 0x16 */, HAL_PHYTX_REQUEST_CTRL_INFO = 23 /* 0x17 */, HAL_PHYTX_DATA_REQUEST = 24 /* 0x18 */, HAL_PHYTX_BF_CV_LOADING_DONE = 25 /* 0x19 */, HAL_PHYTX_NAP_ACK = 26 /* 0x1a */, HAL_PHYTX_NAP_DONE = 27 /* 0x1b */, HAL_PHYTX_OFF_ACK = 28 /* 0x1c */, HAL_PHYTX_ON_ACK = 29 /* 0x1d */, HAL_PHYTX_SYNTH_OFF_ACK = 30 /* 0x1e */, HAL_PHYTX_DEBUG16 = 31 /* 0x1f */, HAL_MACTX_ABORT_REQUEST = 32 /* 0x20 */, HAL_MACTX_ABORT_ACK = 33 /* 0x21 */, HAL_MACTX_PKT_END = 34 /* 0x22 */, HAL_MACTX_PRE_PHY_DESC = 35 /* 0x23 */, HAL_MACTX_BF_PARAMS_COMMON = 36 /* 0x24 */, HAL_MACTX_BF_PARAMS_PER_USER = 37 /* 0x25 */, HAL_MACTX_PREFETCH_CV = 38 /* 0x26 */, HAL_MACTX_USER_DESC_COMMON = 39 /* 0x27 */, HAL_MACTX_USER_DESC_PER_USER = 40 /* 0x28 */, HAL_EXAMPLE_USER_TLV_16 = 41 /* 0x29 */, HAL_EXAMPLE_TLV_16 = 42 /* 0x2a */, HAL_MACTX_PHY_OFF = 43 /* 0x2b */, HAL_MACTX_PHY_ON = 44 /* 0x2c */, HAL_MACTX_SYNTH_OFF = 45 /* 0x2d */, HAL_MACTX_EXPECT_CBF_COMMON = 46 /* 0x2e */, HAL_MACTX_EXPECT_CBF_PER_USER = 47 /* 0x2f */, HAL_MACTX_PHY_DESC = 48 /* 0x30 */, HAL_MACTX_L_SIG_A = 49 /* 0x31 */, HAL_MACTX_L_SIG_B = 50 /* 0x32 */, HAL_MACTX_HT_SIG = 51 /* 0x33 */, HAL_MACTX_VHT_SIG_A = 52 /* 0x34 */, HAL_MACTX_VHT_SIG_B_SU20 = 53 /* 0x35 */, HAL_MACTX_VHT_SIG_B_SU40 = 54 /* 0x36 */, HAL_MACTX_VHT_SIG_B_SU80 = 55 /* 0x37 */, HAL_MACTX_VHT_SIG_B_SU160 = 56 /* 0x38 */, HAL_MACTX_VHT_SIG_B_MU20 = 57 /* 0x39 */, HAL_MACTX_VHT_SIG_B_MU40 = 58 /* 0x3a */, HAL_MACTX_VHT_SIG_B_MU80 = 59 /* 0x3b */, HAL_MACTX_VHT_SIG_B_MU160 = 60 /* 0x3c */, HAL_MACTX_SERVICE = 61 /* 0x3d */, HAL_MACTX_HE_SIG_A_SU = 62 /* 0x3e */, HAL_MACTX_HE_SIG_A_MU_DL = 63 /* 0x3f */, HAL_MACTX_HE_SIG_A_MU_UL = 64 /* 0x40 */, HAL_MACTX_HE_SIG_B1_MU = 65 /* 0x41 */, HAL_MACTX_HE_SIG_B2_MU = 66 /* 0x42 */, HAL_MACTX_HE_SIG_B2_OFDMA = 67 /* 0x43 */, HAL_MACTX_DELETE_CV = 68 /* 0x44 */, HAL_MACTX_MU_UPLINK_COMMON = 69 /* 0x45 */, HAL_MACTX_MU_UPLINK_USER_SETUP = 70 /* 0x46 */, HAL_MACTX_OTHER_TRANSMIT_INFO = 71 /* 0x47 */, HAL_MACTX_PHY_NAP = 72 /* 0x48 */, HAL_MACTX_DEBUG = 73 /* 0x49 */, HAL_PHYRX_ABORT_ACK = 74 /* 0x4a */, HAL_PHYRX_GENERATED_CBF_DETAILS = 75 /* 0x4b */, HAL_PHYRX_RSSI_LEGACY = 76 /* 0x4c */, HAL_PHYRX_RSSI_HT = 77 /* 0x4d */, HAL_PHYRX_USER_INFO = 78 /* 0x4e */, HAL_PHYRX_PKT_END = 79 /* 0x4f */, HAL_PHYRX_DEBUG = 80 /* 0x50 */, HAL_PHYRX_CBF_TRANSFER_DONE = 81 /* 0x51 */, HAL_PHYRX_CBF_TRANSFER_ABORT = 82 /* 0x52 */, HAL_PHYRX_L_SIG_A = 83 /* 0x53 */, HAL_PHYRX_L_SIG_B = 84 /* 0x54 */, HAL_PHYRX_HT_SIG = 85 /* 0x55 */, HAL_PHYRX_VHT_SIG_A = 86 /* 0x56 */, HAL_PHYRX_VHT_SIG_B_SU20 = 87 /* 0x57 */, HAL_PHYRX_VHT_SIG_B_SU40 = 88 /* 0x58 */, HAL_PHYRX_VHT_SIG_B_SU80 = 89 /* 0x59 */, HAL_PHYRX_VHT_SIG_B_SU160 = 90 /* 0x5a */, HAL_PHYRX_VHT_SIG_B_MU20 = 91 /* 0x5b */, HAL_PHYRX_VHT_SIG_B_MU40 = 92 /* 0x5c */, HAL_PHYRX_VHT_SIG_B_MU80 = 93 /* 0x5d */, HAL_PHYRX_VHT_SIG_B_MU160 = 94 /* 0x5e */, HAL_PHYRX_HE_SIG_A_SU = 95 /* 0x5f */, HAL_PHYRX_HE_SIG_A_MU_DL = 96 /* 0x60 */, HAL_PHYRX_HE_SIG_A_MU_UL = 97 /* 0x61 */, HAL_PHYRX_HE_SIG_B1_MU = 98 /* 0x62 */, HAL_PHYRX_HE_SIG_B2_MU = 99 /* 0x63 */, HAL_PHYRX_HE_SIG_B2_OFDMA = 100 /* 0x64 */, HAL_PHYRX_OTHER_RECEIVE_INFO = 101 /* 0x65 */, HAL_PHYRX_COMMON_USER_INFO = 102 /* 0x66 */, HAL_PHYRX_DATA_DONE = 103 /* 0x67 */, HAL_RECEIVE_RSSI_INFO = 104 /* 0x68 */, HAL_RECEIVE_USER_INFO = 105 /* 0x69 */, HAL_MIMO_CONTROL_INFO = 106 /* 0x6a */, HAL_RX_LOCATION_INFO = 107 /* 0x6b */, HAL_COEX_TX_REQ = 108 /* 0x6c */, HAL_DUMMY = 109 /* 0x6d */, HAL_RX_TIMING_OFFSET_INFO = 110 /* 0x6e */, HAL_EXAMPLE_TLV_32_NAME = 111 /* 0x6f */, HAL_MPDU_LIMIT = 112 /* 0x70 */, HAL_NA_LENGTH_END = 113 /* 0x71 */, HAL_OLE_BUF_STATUS = 114 /* 0x72 */, HAL_PCU_PPDU_SETUP_DONE = 115 /* 0x73 */, HAL_PCU_PPDU_SETUP_END = 116 /* 0x74 */, HAL_PCU_PPDU_SETUP_INIT = 117 /* 0x75 */, HAL_PCU_PPDU_SETUP_START = 118 /* 0x76 */, HAL_PDG_FES_SETUP = 119 /* 0x77 */, HAL_PDG_RESPONSE = 120 /* 0x78 */, HAL_PDG_TX_REQ = 121 /* 0x79 */, HAL_SCH_WAIT_INSTR = 122 /* 0x7a */, HAL_SCHEDULER_TLV = 123 /* 0x7b */, HAL_TQM_FLOW_EMPTY_STATUS = 124 /* 0x7c */, HAL_TQM_FLOW_NOT_EMPTY_STATUS = 125 /* 0x7d */, HAL_TQM_GEN_MPDU_LENGTH_LIST = 126 /* 0x7e */, HAL_TQM_GEN_MPDU_LENGTH_LIST_STATUS = 127 /* 0x7f */, HAL_TQM_GEN_MPDUS = 128 /* 0x80 */, HAL_TQM_GEN_MPDUS_STATUS = 129 /* 0x81 */, HAL_TQM_REMOVE_MPDU = 130 /* 0x82 */, HAL_TQM_REMOVE_MPDU_STATUS = 131 /* 0x83 */, HAL_TQM_REMOVE_MSDU = 132 /* 0x84 */, HAL_TQM_REMOVE_MSDU_STATUS = 133 /* 0x85 */, HAL_TQM_UPDATE_TX_MPDU_COUNT = 134 /* 0x86 */, HAL_TQM_WRITE_CMD = 135 /* 0x87 */, HAL_OFDMA_TRIGGER_DETAILS = 136 /* 0x88 */, HAL_TX_DATA = 137 /* 0x89 */, HAL_TX_FES_SETUP = 138 /* 0x8a */, HAL_RX_PACKET = 139 /* 0x8b */, HAL_EXPECTED_RESPONSE = 140 /* 0x8c */, HAL_TX_MPDU_END = 141 /* 0x8d */, HAL_TX_MPDU_START = 142 /* 0x8e */, HAL_TX_MSDU_END = 143 /* 0x8f */, HAL_TX_MSDU_START = 144 /* 0x90 */, HAL_TX_SW_MODE_SETUP = 145 /* 0x91 */, HAL_TXPCU_BUFFER_STATUS = 146 /* 0x92 */, HAL_TXPCU_USER_BUFFER_STATUS = 147 /* 0x93 */, HAL_DATA_TO_TIME_CONFIG = 148 /* 0x94 */, HAL_EXAMPLE_USER_TLV_32 = 149 /* 0x95 */, HAL_MPDU_INFO = 150 /* 0x96 */, HAL_PDG_USER_SETUP = 151 /* 0x97 */, HAL_TX_11AH_SETUP = 152 /* 0x98 */, HAL_REO_UPDATE_RX_REO_QUEUE_STATUS = 153 /* 0x99 */, HAL_TX_PEER_ENTRY = 154 /* 0x9a */, HAL_TX_RAW_OR_NATIVE_FRAME_SETUP = 155 /* 0x9b */, HAL_EXAMPLE_STRUCT_NAME = 156 /* 0x9c */, HAL_PCU_PPDU_SETUP_END_INFO = 157 /* 0x9d */, HAL_PPDU_RATE_SETTING = 158 /* 0x9e */, HAL_PROT_RATE_SETTING = 159 /* 0x9f */, HAL_RX_MPDU_DETAILS = 160 /* 0xa0 */, HAL_EXAMPLE_USER_TLV_42 = 161 /* 0xa1 */, HAL_RX_MSDU_LINK = 162 /* 0xa2 */, HAL_RX_REO_QUEUE = 163 /* 0xa3 */, HAL_ADDR_SEARCH_ENTRY = 164 /* 0xa4 */, HAL_SCHEDULER_CMD = 165 /* 0xa5 */, HAL_TX_FLUSH = 166 /* 0xa6 */, HAL_TQM_ENTRANCE_RING = 167 /* 0xa7 */, HAL_TX_DATA_WORD = 168 /* 0xa8 */, HAL_TX_MPDU_DETAILS = 169 /* 0xa9 */, HAL_TX_MPDU_LINK = 170 /* 0xaa */, HAL_TX_MPDU_LINK_PTR = 171 /* 0xab */, HAL_TX_MPDU_QUEUE_HEAD = 172 /* 0xac */, HAL_TX_MPDU_QUEUE_EXT = 173 /* 0xad */, HAL_TX_MPDU_QUEUE_EXT_PTR = 174 /* 0xae */, HAL_TX_MSDU_DETAILS = 175 /* 0xaf */, HAL_TX_MSDU_EXTENSION = 176 /* 0xb0 */, HAL_TX_MSDU_FLOW = 177 /* 0xb1 */, HAL_TX_MSDU_LINK = 178 /* 0xb2 */, HAL_TX_MSDU_LINK_ENTRY_PTR = 179 /* 0xb3 */, HAL_RESPONSE_RATE_SETTING = 180 /* 0xb4 */, HAL_TXPCU_BUFFER_BASICS = 181 /* 0xb5 */, HAL_UNIFORM_DESCRIPTOR_HEADER = 182 /* 0xb6 */, HAL_UNIFORM_TQM_CMD_HEADER = 183 /* 0xb7 */, HAL_UNIFORM_TQM_STATUS_HEADER = 184 /* 0xb8 */, HAL_USER_RATE_SETTING = 185 /* 0xb9 */, HAL_WBM_BUFFER_RING = 186 /* 0xba */, HAL_WBM_LINK_DESCRIPTOR_RING = 187 /* 0xbb */, HAL_WBM_RELEASE_RING = 188 /* 0xbc */, HAL_TX_FLUSH_REQ = 189 /* 0xbd */, HAL_RX_MSDU_DETAILS = 190 /* 0xbe */, HAL_TQM_WRITE_CMD_STATUS = 191 /* 0xbf */, HAL_TQM_GET_MPDU_QUEUE_STATS = 192 /* 0xc0 */, HAL_TQM_GET_MSDU_FLOW_STATS = 193 /* 0xc1 */, HAL_EXAMPLE_USER_CTLV_32 = 194 /* 0xc2 */, HAL_TX_FES_STATUS_START = 195 /* 0xc3 */, HAL_TX_FES_STATUS_USER_PPDU = 196 /* 0xc4 */, HAL_TX_FES_STATUS_USER_RESPONSE = 197 /* 0xc5 */, HAL_TX_FES_STATUS_END = 198 /* 0xc6 */, HAL_RX_TRIG_INFO = 199 /* 0xc7 */, HAL_RXPCU_TX_SETUP_CLEAR = 200 /* 0xc8 */, HAL_RX_FRAME_BITMAP_REQ = 201 /* 0xc9 */, HAL_RX_FRAME_BITMAP_ACK = 202 /* 0xca */, HAL_COEX_RX_STATUS = 203 /* 0xcb */, HAL_RX_START_PARAM = 204 /* 0xcc */, HAL_RX_PPDU_START = 205 /* 0xcd */, HAL_RX_PPDU_END = 206 /* 0xce */, HAL_RX_MPDU_START = 207 /* 0xcf */, HAL_RX_MPDU_END = 208 /* 0xd0 */, HAL_RX_MSDU_START = 209 /* 0xd1 */, HAL_RX_MSDU_END = 210 /* 0xd2 */, HAL_RX_ATTENTION = 211 /* 0xd3 */, HAL_RECEIVED_RESPONSE_INFO = 212 /* 0xd4 */, HAL_RX_PHY_SLEEP = 213 /* 0xd5 */, HAL_RX_HEADER = 214 /* 0xd6 */, HAL_RX_PEER_ENTRY = 215 /* 0xd7 */, HAL_RX_FLUSH = 216 /* 0xd8 */, HAL_RX_RESPONSE_REQUIRED_INFO = 217 /* 0xd9 */, HAL_RX_FRAMELESS_BAR_DETAILS = 218 /* 0xda */, HAL_TQM_GET_MPDU_QUEUE_STATS_STATUS = 219 /* 0xdb */, HAL_TQM_GET_MSDU_FLOW_STATS_STATUS = 220 /* 0xdc */, HAL_TX_CBF_INFO = 221 /* 0xdd */, HAL_PCU_PPDU_SETUP_USER = 222 /* 0xde */, HAL_RX_MPDU_PCU_START = 223 /* 0xdf */, HAL_RX_PM_INFO = 224 /* 0xe0 */, HAL_RX_USER_PPDU_END = 225 /* 0xe1 */, HAL_RX_PRE_PPDU_START = 226 /* 0xe2 */, HAL_RX_PREAMBLE = 227 /* 0xe3 */, HAL_TX_FES_SETUP_COMPLETE = 228 /* 0xe4 */, HAL_TX_LAST_MPDU_FETCHED = 229 /* 0xe5 */, HAL_TXDMA_STOP_REQUEST = 230 /* 0xe6 */, HAL_RXPCU_SETUP = 231 /* 0xe7 */, HAL_RXPCU_USER_SETUP = 232 /* 0xe8 */, HAL_TX_FES_STATUS_ACK_OR_BA = 233 /* 0xe9 */, HAL_TQM_ACKED_MPDU = 234 /* 0xea */, HAL_COEX_TX_RESP = 235 /* 0xeb */, HAL_COEX_TX_STATUS = 236 /* 0xec */, HAL_MACTX_COEX_PHY_CTRL = 237 /* 0xed */, HAL_COEX_STATUS_BROADCAST = 238 /* 0xee */, HAL_RESPONSE_START_STATUS = 239 /* 0xef */, HAL_RESPONSE_END_STATUS = 240 /* 0xf0 */, HAL_CRYPTO_STATUS = 241 /* 0xf1 */, HAL_RECEIVED_TRIGGER_INFO = 242 /* 0xf2 */, HAL_REO_ENTRANCE_RING = 243 /* 0xf3 */, HAL_RX_MPDU_LINK = 244 /* 0xf4 */, HAL_COEX_TX_STOP_CTRL = 245 /* 0xf5 */, HAL_RX_PPDU_ACK_REPORT = 246 /* 0xf6 */, HAL_RX_PPDU_NO_ACK_REPORT = 247 /* 0xf7 */, HAL_SCH_COEX_STATUS = 248 /* 0xf8 */, HAL_SCHEDULER_COMMAND_STATUS = 249 /* 0xf9 */, HAL_SCHEDULER_RX_PPDU_NO_RESPONSE_STATUS = 250 /* 0xfa */, HAL_TX_FES_STATUS_PROT = 251 /* 0xfb */, HAL_TX_FES_STATUS_START_PPDU = 252 /* 0xfc */, HAL_TX_FES_STATUS_START_PROT = 253 /* 0xfd */, HAL_TXPCU_PHYTX_DEBUG32 = 254 /* 0xfe */, HAL_TXPCU_PHYTX_OTHER_TRANSMIT_INFO32 = 255 /* 0xff */, HAL_TX_MPDU_COUNT_TRANSFER_END = 256 /* 0x100 */, HAL_WHO_ANCHOR_OFFSET = 257 /* 0x101 */, HAL_WHO_ANCHOR_VALUE = 258 /* 0x102 */, HAL_WHO_CCE_INFO = 259 /* 0x103 */, HAL_WHO_COMMIT = 260 /* 0x104 */, HAL_WHO_COMMIT_DONE = 261 /* 0x105 */, HAL_WHO_FLUSH = 262 /* 0x106 */, HAL_WHO_L2_LLC = 263 /* 0x107 */, HAL_WHO_L2_PAYLOAD = 264 /* 0x108 */, HAL_WHO_L3_CHECKSUM = 265 /* 0x109 */, HAL_WHO_L3_INFO = 266 /* 0x10a */, HAL_WHO_L4_CHECKSUM = 267 /* 0x10b */, HAL_WHO_L4_INFO = 268 /* 0x10c */, HAL_WHO_MSDU = 269 /* 0x10d */, HAL_WHO_MSDU_MISC = 270 /* 0x10e */, HAL_WHO_PACKET_DATA = 271 /* 0x10f */, HAL_WHO_PACKET_HDR = 272 /* 0x110 */, HAL_WHO_PPDU_END = 273 /* 0x111 */, HAL_WHO_PPDU_START = 274 /* 0x112 */, HAL_WHO_TSO = 275 /* 0x113 */, HAL_WHO_WMAC_HEADER_PV0 = 276 /* 0x114 */, HAL_WHO_WMAC_HEADER_PV1 = 277 /* 0x115 */, HAL_WHO_WMAC_IV = 278 /* 0x116 */, HAL_MPDU_INFO_END = 279 /* 0x117 */, HAL_MPDU_INFO_BITMAP = 280 /* 0x118 */, HAL_TX_QUEUE_EXTENSION = 281 /* 0x119 */, HAL_RX_PEER_ENTRY_DETAILS = 282 /* 0x11a */, HAL_RX_REO_QUEUE_REFERENCE = 283 /* 0x11b */, HAL_RX_REO_QUEUE_EXT = 284 /* 0x11c */, HAL_SCHEDULER_SELFGEN_RESPONSE_STATUS = 285 /* 0x11d */, HAL_TQM_UPDATE_TX_MPDU_COUNT_STATUS = 286 /* 0x11e */, HAL_TQM_ACKED_MPDU_STATUS = 287 /* 0x11f */, HAL_TQM_ADD_MSDU_STATUS = 288 /* 0x120 */, HAL_RX_MPDU_LINK_PTR = 289 /* 0x121 */, HAL_REO_DESTINATION_RING = 290 /* 0x122 */, HAL_TQM_LIST_GEN_DONE = 291 /* 0x123 */, HAL_WHO_TERMINATE = 292 /* 0x124 */, HAL_TX_LAST_MPDU_END = 293 /* 0x125 */, HAL_TX_CV_DATA = 294 /* 0x126 */, HAL_TCL_ENTRANCE_FROM_PPE_RING = 295 /* 0x127 */, HAL_PPDU_TX_END = 296 /* 0x128 */, HAL_PROT_TX_END = 297 /* 0x129 */, HAL_PDG_RESPONSE_RATE_SETTING = 298 /* 0x12a */, HAL_MPDU_INFO_GLOBAL_END = 299 /* 0x12b */, HAL_TQM_SCH_INSTR_GLOBAL_END = 300 /* 0x12c */, HAL_RX_PPDU_END_USER_STATS = 301 /* 0x12d */, HAL_RX_PPDU_END_USER_STATS_EXT = 302 /* 0x12e */, HAL_NO_ACK_REPORT = 303 /* 0x12f */, HAL_ACK_REPORT = 304 /* 0x130 */, HAL_UNIFORM_REO_CMD_HEADER = 305 /* 0x131 */, HAL_REO_GET_QUEUE_STATS = 306 /* 0x132 */, HAL_REO_FLUSH_QUEUE = 307 /* 0x133 */, HAL_REO_FLUSH_CACHE = 308 /* 0x134 */, HAL_REO_UNBLOCK_CACHE = 309 /* 0x135 */, HAL_UNIFORM_REO_STATUS_HEADER = 310 /* 0x136 */, HAL_REO_GET_QUEUE_STATS_STATUS = 311 /* 0x137 */, HAL_REO_FLUSH_QUEUE_STATUS = 312 /* 0x138 */, HAL_REO_FLUSH_CACHE_STATUS = 313 /* 0x139 */, HAL_REO_UNBLOCK_CACHE_STATUS = 314 /* 0x13a */, HAL_TQM_FLUSH_CACHE = 315 /* 0x13b */, HAL_TQM_UNBLOCK_CACHE = 316 /* 0x13c */, HAL_TQM_FLUSH_CACHE_STATUS = 317 /* 0x13d */, HAL_TQM_UNBLOCK_CACHE_STATUS = 318 /* 0x13e */, HAL_RX_PPDU_END_STATUS_DONE = 319 /* 0x13f */, HAL_RX_STATUS_BUFFER_DONE = 320 /* 0x140 */, HAL_BUFFER_ADDR_INFO = 321 /* 0x141 */, HAL_RX_MSDU_DESC_INFO = 322 /* 0x142 */, HAL_RX_MPDU_DESC_INFO = 323 /* 0x143 */, HAL_TCL_DATA_CMD = 324 /* 0x144 */, HAL_TCL_GSE_CMD = 325 /* 0x145 */, HAL_TCL_EXIT_BASE = 326 /* 0x146 */, HAL_TCL_COMPACT_EXIT_RING = 327 /* 0x147 */, HAL_TCL_REGULAR_EXIT_RING = 328 /* 0x148 */, HAL_TCL_EXTENDED_EXIT_RING = 329 /* 0x149 */, HAL_UPLINK_COMMON_INFO = 330 /* 0x14a */, HAL_UPLINK_USER_SETUP_INFO = 331 /* 0x14b */, HAL_TX_DATA_SYNC = 332 /* 0x14c */, HAL_PHYRX_CBF_READ_REQUEST_ACK = 333 /* 0x14d */, HAL_TCL_STATUS_RING = 334 /* 0x14e */, HAL_TQM_GET_MPDU_HEAD_INFO = 335 /* 0x14f */, HAL_TQM_SYNC_CMD = 336 /* 0x150 */, HAL_TQM_GET_MPDU_HEAD_INFO_STATUS = 337 /* 0x151 */, HAL_TQM_SYNC_CMD_STATUS = 338 /* 0x152 */, HAL_TQM_THRESHOLD_DROP_NOTIFICATION_STATUS = 339 /* 0x153 */, HAL_TQM_DESCRIPTOR_THRESHOLD_REACHED_STATUS = 340 /* 0x154 */, HAL_REO_FLUSH_TIMEOUT_LIST = 341 /* 0x155 */, HAL_REO_FLUSH_TIMEOUT_LIST_STATUS = 342 /* 0x156 */, HAL_REO_TO_PPE_RING = 343 /* 0x157 */, HAL_RX_MPDU_INFO = 344 /* 0x158 */, HAL_REO_DESCRIPTOR_THRESHOLD_REACHED_STATUS = 345 /* 0x159 */, HAL_SCHEDULER_RX_SIFS_RESPONSE_TRIGGER_STATUS = 346 /* 0x15a */, HAL_EXAMPLE_USER_TLV_32_NAME = 347 /* 0x15b */, HAL_RX_PPDU_START_USER_INFO = 348 /* 0x15c */, HAL_RX_RXPCU_CLASSIFICATION_OVERVIEW = 349 /* 0x15d */, HAL_RX_RING_MASK = 350 /* 0x15e */, HAL_WHO_CLASSIFY_INFO = 351 /* 0x15f */, HAL_TXPT_CLASSIFY_INFO = 352 /* 0x160 */, HAL_RXPT_CLASSIFY_INFO = 353 /* 0x161 */, HAL_TX_FLOW_SEARCH_ENTRY = 354 /* 0x162 */, HAL_RX_FLOW_SEARCH_ENTRY = 355 /* 0x163 */, HAL_RECEIVED_TRIGGER_INFO_DETAILS = 356 /* 0x164 */, HAL_COEX_MAC_NAP = 357 /* 0x165 */, HAL_MACRX_ABORT_REQUEST_INFO = 358 /* 0x166 */, HAL_MACTX_ABORT_REQUEST_INFO = 359 /* 0x167 */, HAL_PHYRX_ABORT_REQUEST_INFO = 360 /* 0x168 */, HAL_PHYTX_ABORT_REQUEST_INFO = 361 /* 0x169 */, HAL_RXPCU_PPDU_END_INFO = 362 /* 0x16a */, HAL_WHO_MESH_CONTROL = 363 /* 0x16b */, HAL_L_SIG_A_INFO = 364 /* 0x16c */, HAL_L_SIG_B_INFO = 365 /* 0x16d */, HAL_HT_SIG_INFO = 366 /* 0x16e */, HAL_VHT_SIG_A_INFO = 367 /* 0x16f */, HAL_VHT_SIG_B_SU20_INFO = 368 /* 0x170 */, HAL_VHT_SIG_B_SU40_INFO = 369 /* 0x171 */, HAL_VHT_SIG_B_SU80_INFO = 370 /* 0x172 */, HAL_VHT_SIG_B_SU160_INFO = 371 /* 0x173 */, HAL_VHT_SIG_B_MU20_INFO = 372 /* 0x174 */, HAL_VHT_SIG_B_MU40_INFO = 373 /* 0x175 */, HAL_VHT_SIG_B_MU80_INFO = 374 /* 0x176 */, HAL_VHT_SIG_B_MU160_INFO = 375 /* 0x177 */, HAL_SERVICE_INFO = 376 /* 0x178 */, HAL_HE_SIG_A_SU_INFO = 377 /* 0x179 */, HAL_HE_SIG_A_MU_DL_INFO = 378 /* 0x17a */, HAL_HE_SIG_A_MU_UL_INFO = 379 /* 0x17b */, HAL_HE_SIG_B1_MU_INFO = 380 /* 0x17c */, HAL_HE_SIG_B2_MU_INFO = 381 /* 0x17d */, HAL_HE_SIG_B2_OFDMA_INFO = 382 /* 0x17e */, HAL_PDG_SW_MODE_BW_START = 383 /* 0x17f */, HAL_PDG_SW_MODE_BW_END = 384 /* 0x180 */, HAL_PDG_WAIT_FOR_MAC_REQUEST = 385 /* 0x181 */, HAL_PDG_WAIT_FOR_PHY_REQUEST = 386 /* 0x182 */, HAL_SCHEDULER_END = 387 /* 0x183 */, HAL_PEER_TABLE_ENTRY = 388 /* 0x184 */, HAL_SW_PEER_INFO = 389 /* 0x185 */, HAL_RXOLE_CCE_CLASSIFY_INFO = 390 /* 0x186 */, HAL_TCL_CCE_CLASSIFY_INFO = 391 /* 0x187 */, HAL_RXOLE_CCE_INFO = 392 /* 0x188 */, HAL_TCL_CCE_INFO = 393 /* 0x189 */, HAL_TCL_CCE_SUPERRULE = 394 /* 0x18a */, HAL_CCE_RULE = 395 /* 0x18b */, HAL_RX_PPDU_START_DROPPED = 396 /* 0x18c */, HAL_RX_PPDU_END_DROPPED = 397 /* 0x18d */, HAL_RX_PPDU_END_STATUS_DONE_DROPPED = 398 /* 0x18e */, HAL_RX_MPDU_START_DROPPED = 399 /* 0x18f */, HAL_RX_MSDU_START_DROPPED = 400 /* 0x190 */, HAL_RX_MSDU_END_DROPPED = 401 /* 0x191 */, HAL_RX_MPDU_END_DROPPED = 402 /* 0x192 */, HAL_RX_ATTENTION_DROPPED = 403 /* 0x193 */, HAL_TXPCU_USER_SETUP = 404 /* 0x194 */, HAL_RXPCU_USER_SETUP_EXT = 405 /* 0x195 */, HAL_CE_SRC_DESC = 406 /* 0x196 */, HAL_CE_STAT_DESC = 407 /* 0x197 */, HAL_RXOLE_CCE_SUPERRULE = 408 /* 0x198 */, HAL_TX_RATE_STATS_INFO = 409 /* 0x199 */, HAL_CMD_PART_0_END = 410 /* 0x19a */, HAL_MACTX_SYNTH_ON = 411 /* 0x19b */, HAL_SCH_CRITICAL_TLV_REFERENCE = 412 /* 0x19c */, HAL_TQM_MPDU_GLOBAL_START = 413 /* 0x19d */, HAL_EXAMPLE_TLV_32 = 414 /* 0x19e */, HAL_TQM_UPDATE_TX_MSDU_FLOW = 415 /* 0x19f */, HAL_TQM_UPDATE_TX_MPDU_QUEUE_HEAD = 416 /* 0x1a0 */, HAL_TQM_UPDATE_TX_MSDU_FLOW_STATUS = 417 /* 0x1a1 */, HAL_TQM_UPDATE_TX_MPDU_QUEUE_HEAD_STATUS = 418 /* 0x1a2 */, HAL_REO_UPDATE_RX_REO_QUEUE = 419 /* 0x1a3 */, HAL_CE_DST_DESC = 420 /* 0x1a4 */, HAL_TLV_BASE = 511 /* 0x1ff */, }; #define HAL_TLV_HDR_TAG GENMASK(9, 1) #define HAL_TLV_HDR_LEN GENMASK(25, 10) #define HAL_TLV_ALIGN 4 struct hal_tlv_hdr { u32 tl; u8 value[]; } __packed; #define RX_MPDU_DESC_INFO0_MSDU_COUNT GENMASK(7, 0) #define RX_MPDU_DESC_INFO0_SEQ_NUM GENMASK(19, 8) #define RX_MPDU_DESC_INFO0_FRAG_FLAG BIT(20) #define RX_MPDU_DESC_INFO0_MPDU_RETRY BIT(21) #define RX_MPDU_DESC_INFO0_AMPDU_FLAG BIT(22) #define RX_MPDU_DESC_INFO0_BAR_FRAME BIT(23) #define RX_MPDU_DESC_INFO0_VALID_PN BIT(24) #define RX_MPDU_DESC_INFO0_VALID_SA BIT(25) #define RX_MPDU_DESC_INFO0_SA_IDX_TIMEOUT BIT(26) #define RX_MPDU_DESC_INFO0_VALID_DA BIT(27) #define RX_MPDU_DESC_INFO0_DA_MCBC BIT(28) #define RX_MPDU_DESC_INFO0_DA_IDX_TIMEOUT BIT(29) #define RX_MPDU_DESC_INFO0_RAW_MPDU BIT(30) struct rx_mpdu_desc { u32 info0; /* %RX_MPDU_DESC_INFO */ u32 meta_data; } __packed; /* rx_mpdu_desc * Producer: RXDMA * Consumer: REO/SW/FW * * msdu_count * The number of MSDUs within the MPDU * * mpdu_sequence_number * The field can have two different meanings based on the setting * of field 'bar_frame'. If 'bar_frame' is set, it means the MPDU * start sequence number from the BAR frame otherwise it means * the MPDU sequence number of the received frame. * * fragment_flag * When set, this MPDU is a fragment and REO should forward this * fragment MPDU to the REO destination ring without any reorder * checks, pn checks or bitmap update. This implies that REO is * forwarding the pointer to the MSDU link descriptor. * * mpdu_retry_bit * The retry bit setting from the MPDU header of the received frame * * ampdu_flag * Indicates the MPDU was received as part of an A-MPDU. * * bar_frame * Indicates the received frame is a BAR frame. After processing, * this frame shall be pushed to SW or deleted. * * valid_pn * When not set, REO will not perform a PN sequence number check. * * valid_sa * Indicates OLE found a valid SA entry for all MSDUs in this MPDU. * * sa_idx_timeout * Indicates, at least 1 MSDU within the MPDU has an unsuccessful * MAC source address search due to the expiration of search timer. * * valid_da * When set, OLE found a valid DA entry for all MSDUs in this MPDU. * * da_mcbc * Field Only valid if valid_da is set. Indicates at least one of * the DA addresses is a Multicast or Broadcast address. * * da_idx_timeout * Indicates, at least 1 MSDU within the MPDU has an unsuccessful * MAC destination address search due to the expiration of search * timer. * * raw_mpdu * Field only valid when first_msdu_in_mpdu_flag is set. Indicates * the contents in the MSDU buffer contains a 'RAW' MPDU. */ enum hal_rx_msdu_desc_reo_dest_ind { HAL_RX_MSDU_DESC_REO_DEST_IND_TCL, HAL_RX_MSDU_DESC_REO_DEST_IND_SW1, HAL_RX_MSDU_DESC_REO_DEST_IND_SW2, HAL_RX_MSDU_DESC_REO_DEST_IND_SW3, HAL_RX_MSDU_DESC_REO_DEST_IND_SW4, HAL_RX_MSDU_DESC_REO_DEST_IND_RELEASE, HAL_RX_MSDU_DESC_REO_DEST_IND_FW, }; #define RX_MSDU_DESC_INFO0_FIRST_MSDU_IN_MPDU BIT(0) #define RX_MSDU_DESC_INFO0_LAST_MSDU_IN_MPDU BIT(1) #define RX_MSDU_DESC_INFO0_MSDU_CONTINUATION BIT(2) #define RX_MSDU_DESC_INFO0_MSDU_LENGTH GENMASK(16, 3) #define RX_MSDU_DESC_INFO0_REO_DEST_IND GENMASK(21, 17) #define RX_MSDU_DESC_INFO0_MSDU_DROP BIT(22) #define RX_MSDU_DESC_INFO0_VALID_SA BIT(23) #define RX_MSDU_DESC_INFO0_SA_IDX_TIMEOUT BIT(24) #define RX_MSDU_DESC_INFO0_VALID_DA BIT(25) #define RX_MSDU_DESC_INFO0_DA_MCBC BIT(26) #define RX_MSDU_DESC_INFO0_DA_IDX_TIMEOUT BIT(27) #define HAL_RX_MSDU_PKT_LENGTH_GET(val) \ (FIELD_GET(RX_MSDU_DESC_INFO0_MSDU_LENGTH, (val))) struct rx_msdu_desc { u32 info0; u32 rsvd0; } __packed; /* rx_msdu_desc * * first_msdu_in_mpdu * Indicates first msdu in mpdu. * * last_msdu_in_mpdu * Indicates last msdu in mpdu. This flag can be true only when * 'Msdu_continuation' set to 0. This implies that when an msdu * is spread out over multiple buffers and thus msdu_continuation * is set, only for the very last buffer of the msdu, can the * 'last_msdu_in_mpdu' be set. * * When both first_msdu_in_mpdu and last_msdu_in_mpdu are set, * the MPDU that this MSDU belongs to only contains a single MSDU. * * msdu_continuation * When set, this MSDU buffer was not able to hold the entire MSDU. * The next buffer will therefor contain additional information * related to this MSDU. * * msdu_length * Field is only valid in combination with the 'first_msdu_in_mpdu' * being set. Full MSDU length in bytes after decapsulation. This * field is still valid for MPDU frames without A-MSDU. It still * represents MSDU length after decapsulation Or in case of RAW * MPDUs, it indicates the length of the entire MPDU (without FCS * field). * * reo_destination_indication * The id of the reo exit ring where the msdu frame shall push * after (MPDU level) reordering has finished. Values are defined * in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_. * * msdu_drop * Indicates that REO shall drop this MSDU and not forward it to * any other ring. * * valid_sa * Indicates OLE found a valid SA entry for this MSDU. * * sa_idx_timeout * Indicates, an unsuccessful MAC source address search due to * the expiration of search timer for this MSDU. * * valid_da * When set, OLE found a valid DA entry for this MSDU. * * da_mcbc * Field Only valid if valid_da is set. Indicates the DA address * is a Multicast or Broadcast address for this MSDU. * * da_idx_timeout * Indicates, an unsuccessful MAC destination address search due * to the expiration of search timer fot this MSDU. */ enum hal_reo_dest_ring_buffer_type { HAL_REO_DEST_RING_BUFFER_TYPE_MSDU, HAL_REO_DEST_RING_BUFFER_TYPE_LINK_DESC, }; enum hal_reo_dest_ring_push_reason { HAL_REO_DEST_RING_PUSH_REASON_ERR_DETECTED, HAL_REO_DEST_RING_PUSH_REASON_ROUTING_INSTRUCTION, }; enum hal_reo_dest_ring_error_code { HAL_REO_DEST_RING_ERROR_CODE_DESC_ADDR_ZERO, HAL_REO_DEST_RING_ERROR_CODE_DESC_INVALID, HAL_REO_DEST_RING_ERROR_CODE_AMPDU_IN_NON_BA, HAL_REO_DEST_RING_ERROR_CODE_NON_BA_DUPLICATE, HAL_REO_DEST_RING_ERROR_CODE_BA_DUPLICATE, HAL_REO_DEST_RING_ERROR_CODE_FRAME_2K_JUMP, HAL_REO_DEST_RING_ERROR_CODE_BAR_2K_JUMP, HAL_REO_DEST_RING_ERROR_CODE_FRAME_OOR, HAL_REO_DEST_RING_ERROR_CODE_BAR_OOR, HAL_REO_DEST_RING_ERROR_CODE_NO_BA_SESSION, HAL_REO_DEST_RING_ERROR_CODE_FRAME_SN_EQUALS_SSN, HAL_REO_DEST_RING_ERROR_CODE_PN_CHECK_FAILED, HAL_REO_DEST_RING_ERROR_CODE_2K_ERR_FLAG_SET, HAL_REO_DEST_RING_ERROR_CODE_PN_ERR_FLAG_SET, HAL_REO_DEST_RING_ERROR_CODE_DESC_BLOCKED, HAL_REO_DEST_RING_ERROR_CODE_MAX, }; #define HAL_REO_DEST_RING_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) #define HAL_REO_DEST_RING_INFO0_BUFFER_TYPE BIT(8) #define HAL_REO_DEST_RING_INFO0_PUSH_REASON GENMASK(10, 9) #define HAL_REO_DEST_RING_INFO0_ERROR_CODE GENMASK(15, 11) #define HAL_REO_DEST_RING_INFO0_RX_QUEUE_NUM GENMASK(31, 16) #define HAL_REO_DEST_RING_INFO1_REORDER_INFO_VALID BIT(0) #define HAL_REO_DEST_RING_INFO1_REORDER_OPCODE GENMASK(4, 1) #define HAL_REO_DEST_RING_INFO1_REORDER_SLOT_IDX GENMASK(12, 5) #define HAL_REO_DEST_RING_INFO2_RING_ID GENMASK(27, 20) #define HAL_REO_DEST_RING_INFO2_LOOPING_COUNT GENMASK(31, 28) struct hal_reo_dest_ring { struct ath11k_buffer_addr buf_addr_info; struct rx_mpdu_desc rx_mpdu_info; struct rx_msdu_desc rx_msdu_info; u32 queue_addr_lo; u32 info0; /* %HAL_REO_DEST_RING_INFO0_ */ u32 info1; /* %HAL_REO_DEST_RING_INFO1_ */ u32 rsvd0; u32 rsvd1; u32 rsvd2; u32 rsvd3; u32 rsvd4; u32 rsvd5; u32 info2; /* %HAL_REO_DEST_RING_INFO2_ */ } __packed; /* hal_reo_dest_ring * * Producer: RXDMA * Consumer: REO/SW/FW * * buf_addr_info * Details of the physical address of a buffer or MSDU * link descriptor. * * rx_mpdu_info * General information related to the MPDU that is passed * on from REO entrance ring to the REO destination ring. * * rx_msdu_info * General information related to the MSDU that is passed * on from RXDMA all the way to to the REO destination ring. * * queue_addr_lo * Address (lower 32 bits) of the REO queue descriptor. * * queue_addr_hi * Address (upper 8 bits) of the REO queue descriptor. * * buffer_type * Indicates the type of address provided in the buf_addr_info. * Values are defined in enum %HAL_REO_DEST_RING_BUFFER_TYPE_. * * push_reason * Reason for pushing this frame to this exit ring. Values are * defined in enum %HAL_REO_DEST_RING_PUSH_REASON_. * * error_code * Valid only when 'push_reason' is set. All error codes are * defined in enum %HAL_REO_DEST_RING_ERROR_CODE_. * * rx_queue_num * Indicates the REO MPDU reorder queue id from which this frame * originated. * * reorder_info_valid * When set, REO has been instructed to not perform the actual * re-ordering of frames for this queue, but just to insert * the reorder opcodes. * * reorder_opcode * Field is valid when 'reorder_info_valid' is set. This field is * always valid for debug purpose as well. * * reorder_slot_idx * Valid only when 'reorder_info_valid' is set. * * ring_id * The buffer pointer ring id. * 0 - Idle ring * 1 - N refers to other rings. * * looping_count * Indicates the number of times the producer of entries into * this ring has looped around the ring. */ enum hal_reo_entr_rxdma_ecode { HAL_REO_ENTR_RING_RXDMA_ECODE_OVERFLOW_ERR, HAL_REO_ENTR_RING_RXDMA_ECODE_MPDU_LEN_ERR, HAL_REO_ENTR_RING_RXDMA_ECODE_FCS_ERR, HAL_REO_ENTR_RING_RXDMA_ECODE_DECRYPT_ERR, HAL_REO_ENTR_RING_RXDMA_ECODE_TKIP_MIC_ERR, HAL_REO_ENTR_RING_RXDMA_ECODE_UNECRYPTED_ERR, HAL_REO_ENTR_RING_RXDMA_ECODE_MSDU_LEN_ERR, HAL_REO_ENTR_RING_RXDMA_ECODE_MSDU_LIMIT_ERR, HAL_REO_ENTR_RING_RXDMA_ECODE_WIFI_PARSE_ERR, HAL_REO_ENTR_RING_RXDMA_ECODE_AMSDU_PARSE_ERR, HAL_REO_ENTR_RING_RXDMA_ECODE_SA_TIMEOUT_ERR, HAL_REO_ENTR_RING_RXDMA_ECODE_DA_TIMEOUT_ERR, HAL_REO_ENTR_RING_RXDMA_ECODE_FLOW_TIMEOUT_ERR, HAL_REO_ENTR_RING_RXDMA_ECODE_FLUSH_REQUEST_ERR, HAL_REO_ENTR_RING_RXDMA_ECODE_MAX, }; #define HAL_REO_ENTR_RING_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) #define HAL_REO_ENTR_RING_INFO0_MPDU_BYTE_COUNT GENMASK(21, 8) #define HAL_REO_ENTR_RING_INFO0_DEST_IND GENMASK(26, 22) #define HAL_REO_ENTR_RING_INFO0_FRAMELESS_BAR BIT(27) #define HAL_REO_ENTR_RING_INFO1_RXDMA_PUSH_REASON GENMASK(1, 0) #define HAL_REO_ENTR_RING_INFO1_RXDMA_ERROR_CODE GENMASK(6, 2) struct hal_reo_entrance_ring { struct ath11k_buffer_addr buf_addr_info; struct rx_mpdu_desc rx_mpdu_info; u32 queue_addr_lo; u32 info0; /* %HAL_REO_ENTR_RING_INFO0_ */ u32 info1; /* %HAL_REO_ENTR_RING_INFO1_ */ u32 info2; /* %HAL_REO_DEST_RING_INFO2_ */ } __packed; /* hal_reo_entrance_ring * * Producer: RXDMA * Consumer: REO * * buf_addr_info * Details of the physical address of a buffer or MSDU * link descriptor. * * rx_mpdu_info * General information related to the MPDU that is passed * on from REO entrance ring to the REO destination ring. * * queue_addr_lo * Address (lower 32 bits) of the REO queue descriptor. * * queue_addr_hi * Address (upper 8 bits) of the REO queue descriptor. * * mpdu_byte_count * An approximation of the number of bytes received in this MPDU. * Used to keeps stats on the amount of data flowing * through a queue. * * reo_destination_indication * The id of the reo exit ring where the msdu frame shall push * after (MPDU level) reordering has finished. Values are defined * in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_. * * frameless_bar * Indicates that this REO entrance ring struct contains BAR info * from a multi TID BAR frame. The original multi TID BAR frame * itself contained all the REO info for the first TID, but all * the subsequent TID info and their linkage to the REO descriptors * is passed down as 'frameless' BAR info. * * The only fields valid in this descriptor when this bit is set * are queue_addr_lo, queue_addr_hi, mpdu_sequence_number, * bar_frame and peer_meta_data. * * rxdma_push_reason * Reason for pushing this frame to this exit ring. Values are * defined in enum %HAL_REO_DEST_RING_PUSH_REASON_. * * rxdma_error_code * Valid only when 'push_reason' is set. All error codes are * defined in enum %HAL_REO_ENTR_RING_RXDMA_ECODE_. * * ring_id * The buffer pointer ring id. * 0 - Idle ring * 1 - N refers to other rings. * * looping_count * Indicates the number of times the producer of entries into * this ring has looped around the ring. */ #define HAL_REO_CMD_HDR_INFO0_CMD_NUMBER GENMASK(15, 0) #define HAL_REO_CMD_HDR_INFO0_STATUS_REQUIRED BIT(16) struct hal_reo_cmd_hdr { u32 info0; } __packed; #define HAL_REO_GET_QUEUE_STATS_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) #define HAL_REO_GET_QUEUE_STATS_INFO0_CLEAR_STATS BIT(8) struct hal_reo_get_queue_stats { struct hal_reo_cmd_hdr cmd; u32 queue_addr_lo; u32 info0; u32 rsvd0[6]; } __packed; /* hal_reo_get_queue_stats * Producer: SW * Consumer: REO * * cmd * Details for command execution tracking purposes. * * queue_addr_lo * Address (lower 32 bits) of the REO queue descriptor. * * queue_addr_hi * Address (upper 8 bits) of the REO queue descriptor. * * clear_stats * Clear stats settings. When set, Clear the stats after * generating the status. * * Following stats will be cleared. * Timeout_count * Forward_due_to_bar_count * Duplicate_count * Frames_in_order_count * BAR_received_count * MPDU_Frames_processed_count * MSDU_Frames_processed_count * Total_processed_byte_count * Late_receive_MPDU_count * window_jump_2k * Hole_count */ #define HAL_REO_FLUSH_QUEUE_INFO0_DESC_ADDR_HI GENMASK(7, 0) #define HAL_REO_FLUSH_QUEUE_INFO0_BLOCK_DESC_ADDR BIT(8) #define HAL_REO_FLUSH_QUEUE_INFO0_BLOCK_RESRC_IDX GENMASK(10, 9) struct hal_reo_flush_queue { struct hal_reo_cmd_hdr cmd; u32 desc_addr_lo; u32 info0; u32 rsvd0[6]; } __packed; #define HAL_REO_FLUSH_CACHE_INFO0_CACHE_ADDR_HI GENMASK(7, 0) #define HAL_REO_FLUSH_CACHE_INFO0_FWD_ALL_MPDUS BIT(8) #define HAL_REO_FLUSH_CACHE_INFO0_RELEASE_BLOCK_IDX BIT(9) #define HAL_REO_FLUSH_CACHE_INFO0_BLOCK_RESRC_IDX GENMASK(11, 10) #define HAL_REO_FLUSH_CACHE_INFO0_FLUSH_WO_INVALIDATE BIT(12) #define HAL_REO_FLUSH_CACHE_INFO0_BLOCK_CACHE_USAGE BIT(13) #define HAL_REO_FLUSH_CACHE_INFO0_FLUSH_ALL BIT(14) struct hal_reo_flush_cache { struct hal_reo_cmd_hdr cmd; u32 cache_addr_lo; u32 info0; u32 rsvd0[6]; } __packed; #define HAL_TCL_DATA_CMD_INFO0_DESC_TYPE BIT(0) #define HAL_TCL_DATA_CMD_INFO0_EPD BIT(1) #define HAL_TCL_DATA_CMD_INFO0_ENCAP_TYPE GENMASK(3, 2) #define HAL_TCL_DATA_CMD_INFO0_ENCRYPT_TYPE GENMASK(7, 4) #define HAL_TCL_DATA_CMD_INFO0_SRC_BUF_SWAP BIT(8) #define HAL_TCL_DATA_CMD_INFO0_LNK_META_SWAP BIT(9) #define HAL_TCL_DATA_CMD_INFO0_SEARCH_TYPE GENMASK(13, 12) #define HAL_TCL_DATA_CMD_INFO0_ADDR_EN GENMASK(15, 14) #define HAL_TCL_DATA_CMD_INFO0_CMD_NUM GENMASK(31, 16) #define HAL_TCL_DATA_CMD_INFO1_DATA_LEN GENMASK(15, 0) #define HAL_TCL_DATA_CMD_INFO1_IP4_CKSUM_EN BIT(16) #define HAL_TCL_DATA_CMD_INFO1_UDP4_CKSUM_EN BIT(17) #define HAL_TCL_DATA_CMD_INFO1_UDP6_CKSUM_EN BIT(18) #define HAL_TCL_DATA_CMD_INFO1_TCP4_CKSUM_EN BIT(19) #define HAL_TCL_DATA_CMD_INFO1_TCP6_CKSUM_EN BIT(20) #define HAL_TCL_DATA_CMD_INFO1_TO_FW BIT(21) #define HAL_TCL_DATA_CMD_INFO1_PKT_OFFSET GENMASK(31, 23) #define HAL_TCL_DATA_CMD_INFO2_BUF_TIMESTAMP GENMASK(18, 0) #define HAL_TCL_DATA_CMD_INFO2_BUF_T_VALID BIT(19) #define HAL_TCL_DATA_CMD_INFO2_MESH_ENABLE BIT(20) #define HAL_TCL_DATA_CMD_INFO2_TID_OVERWRITE BIT(21) #define HAL_TCL_DATA_CMD_INFO2_TID GENMASK(25, 22) #define HAL_TCL_DATA_CMD_INFO2_LMAC_ID GENMASK(27, 26) #define HAL_TCL_DATA_CMD_INFO3_DSCP_TID_TABLE_IDX GENMASK(5, 0) #define HAL_TCL_DATA_CMD_INFO3_SEARCH_INDEX GENMASK(25, 6) #define HAL_TCL_DATA_CMD_INFO3_CACHE_SET_NUM GENMASK(29, 26) #define HAL_TCL_DATA_CMD_INFO4_RING_ID GENMASK(27, 20) #define HAL_TCL_DATA_CMD_INFO4_LOOPING_COUNT GENMASK(31, 28) enum hal_encrypt_type { HAL_ENCRYPT_TYPE_WEP_40, HAL_ENCRYPT_TYPE_WEP_104, HAL_ENCRYPT_TYPE_TKIP_NO_MIC, HAL_ENCRYPT_TYPE_WEP_128, HAL_ENCRYPT_TYPE_TKIP_MIC, HAL_ENCRYPT_TYPE_WAPI, HAL_ENCRYPT_TYPE_CCMP_128, HAL_ENCRYPT_TYPE_OPEN, HAL_ENCRYPT_TYPE_CCMP_256, HAL_ENCRYPT_TYPE_GCMP_128, HAL_ENCRYPT_TYPE_AES_GCMP_256, HAL_ENCRYPT_TYPE_WAPI_GCM_SM4, }; enum hal_tcl_encap_type { HAL_TCL_ENCAP_TYPE_RAW, HAL_TCL_ENCAP_TYPE_NATIVE_WIFI, HAL_TCL_ENCAP_TYPE_ETHERNET, HAL_TCL_ENCAP_TYPE_802_3 = 3, }; enum hal_tcl_desc_type { HAL_TCL_DESC_TYPE_BUFFER, HAL_TCL_DESC_TYPE_EXT_DESC, }; enum hal_wbm_htt_tx_comp_status { HAL_WBM_REL_HTT_TX_COMP_STATUS_OK, HAL_WBM_REL_HTT_TX_COMP_STATUS_DROP, HAL_WBM_REL_HTT_TX_COMP_STATUS_TTL, HAL_WBM_REL_HTT_TX_COMP_STATUS_REINJ, HAL_WBM_REL_HTT_TX_COMP_STATUS_INSPECT, HAL_WBM_REL_HTT_TX_COMP_STATUS_MEC_NOTIFY, }; struct hal_tcl_data_cmd { struct ath11k_buffer_addr buf_addr_info; u32 info0; u32 info1; u32 info2; u32 info3; u32 info4; } __packed; /* hal_tcl_data_cmd * * buf_addr_info * Details of the physical address of a buffer or MSDU * link descriptor. * * desc_type * Indicates the type of address provided in the buf_addr_info. * Values are defined in enum %HAL_REO_DEST_RING_BUFFER_TYPE_. * * epd * When this bit is set then input packet is an EPD type. * * encap_type * Indicates the encapsulation that HW will perform. Values are * defined in enum %HAL_TCL_ENCAP_TYPE_. * * encrypt_type * Field only valid for encap_type: RAW * Values are defined in enum %HAL_ENCRYPT_TYPE_. * * src_buffer_swap * Treats source memory (packet buffer) organization as big-endian. * 1'b0: Source memory is little endian * 1'b1: Source memory is big endian * * link_meta_swap * Treats link descriptor and Metadata as big-endian. * 1'b0: memory is little endian * 1'b1: memory is big endian * * search_type * Search type select * 0 - Normal search, 1 - Index based address search, * 2 - Index based flow search * * addrx_en * addry_en * Address X/Y search enable in ASE correspondingly. * 1'b0: Search disable * 1'b1: Search Enable * * cmd_num * This number can be used to match against status. * * data_length * MSDU length in case of direct descriptor. Length of link * extension descriptor in case of Link extension descriptor. * * *_checksum_en * Enable checksum replacement for ipv4, udp_over_ipv4, ipv6, * udp_over_ipv6, tcp_over_ipv4 and tcp_over_ipv6. * * to_fw * Forward packet to FW along with classification result. The * packet will not be forward to TQM when this bit is set. * 1'b0: Use classification result to forward the packet. * 1'b1: Override classification result & forward packet only to fw * * packet_offset * Packet offset from Metadata in case of direct buffer descriptor. * * buffer_timestamp * buffer_timestamp_valid * Frame system entrance timestamp. It shall be filled by first * module (SW, TCL or TQM) that sees the frames first. * * mesh_enable * For raw WiFi frames, this indicates transmission to a mesh STA, * enabling the interpretation of the 'Mesh Control Present' bit * (bit 8) of QoS Control. * For native WiFi frames, this indicates that a 'Mesh Control' * field is present between the header and the LLC. * * hlos_tid_overwrite * * When set, TCL shall ignore the IP DSCP and VLAN PCP * fields and use HLOS_TID as the final TID. Otherwise TCL * shall consider the DSCP and PCP fields as well as HLOS_TID * and choose a final TID based on the configured priority * * hlos_tid * HLOS MSDU priority * Field is used when HLOS_TID_overwrite is set. * * lmac_id * TCL uses this LMAC_ID in address search, i.e, while * finding matching entry for the packet in AST corresponding * to given LMAC_ID * * If LMAC ID is all 1s (=> value 3), it indicates wildcard * match for any MAC * * dscp_tid_table_num * DSCP to TID mapping table number that need to be used * for the MSDU. * * search_index * The index that will be used for index based address or * flow search. The field is valid when 'search_type' is 1 or 2. * * cache_set_num * * Cache set number that should be used to cache the index * based search results, for address and flow search. This * value should be equal to LSB four bits of the hash value of * match data, in case of search index points to an entry which * may be used in content based search also. The value can be * anything when the entry pointed by search index will not be * used for content based search. * * ring_id * The buffer pointer ring ID. * 0 refers to the IDLE ring * 1 - N refers to other rings * * looping_count * * A count value that indicates the number of times the * producer of entries into the Ring has looped around the * ring. * * At initialization time, this value is set to 0. On the * first loop, this value is set to 1. After the max value is * reached allowed by the number of bits for this field, the * count value continues with 0 again. * * In case SW is the consumer of the ring entries, it can * use this field to figure out up to where the producer of * entries has created new entries. This eliminates the need to * check where the head pointer' of the ring is located once * the SW starts processing an interrupt indicating that new * entries have been put into this ring... * * Also note that SW if it wants only needs to look at the * LSB bit of this count value. */ #define HAL_TCL_DESC_LEN sizeof(struct hal_tcl_data_cmd) enum hal_tcl_gse_ctrl { HAL_TCL_GSE_CTRL_RD_STAT, HAL_TCL_GSE_CTRL_SRCH_DIS, HAL_TCL_GSE_CTRL_WR_BK_SINGLE, HAL_TCL_GSE_CTRL_WR_BK_ALL, HAL_TCL_GSE_CTRL_INVAL_SINGLE, HAL_TCL_GSE_CTRL_INVAL_ALL, HAL_TCL_GSE_CTRL_WR_BK_INVAL_SINGLE, HAL_TCL_GSE_CTRL_WR_BK_INVAL_ALL, HAL_TCL_GSE_CTRL_CLR_STAT_SINGLE, }; /* hal_tcl_gse_ctrl * * rd_stat * Report or Read statistics * srch_dis * Search disable. Report only Hash. * wr_bk_single * Write Back single entry * wr_bk_all * Write Back entire cache entry * inval_single * Invalidate single cache entry * inval_all * Invalidate entire cache * wr_bk_inval_single * Write back and invalidate single entry in cache * wr_bk_inval_all * Write back and invalidate entire cache * clr_stat_single * Clear statistics for single entry */ #define HAL_TCL_GSE_CMD_INFO0_CTRL_BUF_ADDR_HI GENMASK(7, 0) #define HAL_TCL_GSE_CMD_INFO0_GSE_CTRL GENMASK(11, 8) #define HAL_TCL_GSE_CMD_INFO0_GSE_SEL BIT(12) #define HAL_TCL_GSE_CMD_INFO0_STATUS_DEST_RING_ID BIT(13) #define HAL_TCL_GSE_CMD_INFO0_SWAP BIT(14) #define HAL_TCL_GSE_CMD_INFO1_RING_ID GENMASK(27, 20) #define HAL_TCL_GSE_CMD_INFO1_LOOPING_COUNT GENMASK(31, 28) struct hal_tcl_gse_cmd { u32 ctrl_buf_addr_lo; u32 info0; u32 meta_data[2]; u32 rsvd0[2]; u32 info1; } __packed; /* hal_tcl_gse_cmd * * ctrl_buf_addr_lo, ctrl_buf_addr_hi * Address of a control buffer containing additional info needed * for this command execution. * * gse_ctrl * GSE control operations. This includes cache operations and table * entry statistics read/clear operation. Values are defined in * enum %HAL_TCL_GSE_CTRL. * * gse_sel * To select the ASE/FSE to do the operation mention by GSE_ctrl. * 0: FSE select 1: ASE select * * status_destination_ring_id * TCL status ring to which the GSE status needs to be send. * * swap * Bit to enable byte swapping of contents of buffer. * * meta_data * Meta data to be returned in the status descriptor */ enum hal_tcl_cache_op_res { HAL_TCL_CACHE_OP_RES_DONE, HAL_TCL_CACHE_OP_RES_NOT_FOUND, HAL_TCL_CACHE_OP_RES_TIMEOUT, }; #define HAL_TCL_STATUS_RING_INFO0_GSE_CTRL GENMASK(3, 0) #define HAL_TCL_STATUS_RING_INFO0_GSE_SEL BIT(4) #define HAL_TCL_STATUS_RING_INFO0_CACHE_OP_RES GENMASK(6, 5) #define HAL_TCL_STATUS_RING_INFO0_MSDU_CNT GENMASK(31, 8) #define HAL_TCL_STATUS_RING_INFO1_HASH_IDX GENMASK(19, 0) #define HAL_TCL_STATUS_RING_INFO2_RING_ID GENMASK(27, 20) #define HAL_TCL_STATUS_RING_INFO2_LOOPING_COUNT GENMASK(31, 28) struct hal_tcl_status_ring { u32 info0; u32 msdu_byte_count; u32 msdu_timestamp; u32 meta_data[2]; u32 info1; u32 rsvd0; u32 info2; } __packed; /* hal_tcl_status_ring * * gse_ctrl * GSE control operations. This includes cache operations and table * entry statistics read/clear operation. Values are defined in * enum %HAL_TCL_GSE_CTRL. * * gse_sel * To select the ASE/FSE to do the operation mention by GSE_ctrl. * 0: FSE select 1: ASE select * * cache_op_res * Cache operation result. Values are defined in enum * %HAL_TCL_CACHE_OP_RES_. * * msdu_cnt * msdu_byte_count * MSDU count of Entry and MSDU byte count for entry 1. * * hash_indx * Hash value of the entry in case of search failed or disabled. */ #define HAL_CE_SRC_DESC_ADDR_INFO_ADDR_HI GENMASK(7, 0) #define HAL_CE_SRC_DESC_ADDR_INFO_HASH_EN BIT(8) #define HAL_CE_SRC_DESC_ADDR_INFO_BYTE_SWAP BIT(9) #define HAL_CE_SRC_DESC_ADDR_INFO_DEST_SWAP BIT(10) #define HAL_CE_SRC_DESC_ADDR_INFO_GATHER BIT(11) #define HAL_CE_SRC_DESC_ADDR_INFO_LEN GENMASK(31, 16) #define HAL_CE_SRC_DESC_META_INFO_DATA GENMASK(15, 0) #define HAL_CE_SRC_DESC_FLAGS_RING_ID GENMASK(27, 20) #define HAL_CE_SRC_DESC_FLAGS_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT struct hal_ce_srng_src_desc { u32 buffer_addr_low; u32 buffer_addr_info; /* %HAL_CE_SRC_DESC_ADDR_INFO_ */ u32 meta_info; /* %HAL_CE_SRC_DESC_META_INFO_ */ u32 flags; /* %HAL_CE_SRC_DESC_FLAGS_ */ } __packed; /* * hal_ce_srng_src_desc * * buffer_addr_lo * LSB 32 bits of the 40 Bit Pointer to the source buffer * * buffer_addr_hi * MSB 8 bits of the 40 Bit Pointer to the source buffer * * toeplitz_en * Enable generation of 32-bit Toeplitz-LFSR hash for * data transfer. In case of gather field in first source * ring entry of the gather copy cycle in taken into account. * * src_swap * Treats source memory organization as big-endian. For * each dword read (4 bytes), the byte 0 is swapped with byte 3 * and byte 1 is swapped with byte 2. * In case of gather field in first source ring entry of * the gather copy cycle in taken into account. * * dest_swap * Treats destination memory organization as big-endian. * For each dword write (4 bytes), the byte 0 is swapped with * byte 3 and byte 1 is swapped with byte 2. * In case of gather field in first source ring entry of * the gather copy cycle in taken into account. * * gather * Enables gather of multiple copy engine source * descriptors to one destination. * * ce_res_0 * Reserved * * * length * Length of the buffer in units of octets of the current * descriptor * * fw_metadata * Meta data used by FW. * In case of gather field in first source ring entry of * the gather copy cycle in taken into account. * * ce_res_1 * Reserved * * ce_res_2 * Reserved * * ring_id * The buffer pointer ring ID. * 0 refers to the IDLE ring * 1 - N refers to other rings * Helps with debugging when dumping ring contents. * * looping_count * A count value that indicates the number of times the * producer of entries into the Ring has looped around the * ring. * * At initialization time, this value is set to 0. On the * first loop, this value is set to 1. After the max value is * reached allowed by the number of bits for this field, the * count value continues with 0 again. * * In case SW is the consumer of the ring entries, it can * use this field to figure out up to where the producer of * entries has created new entries. This eliminates the need to * check where the head pointer' of the ring is located once * the SW starts processing an interrupt indicating that new * entries have been put into this ring... * * Also note that SW if it wants only needs to look at the * LSB bit of this count value. */ #define HAL_CE_DEST_DESC_ADDR_INFO_ADDR_HI GENMASK(7, 0) #define HAL_CE_DEST_DESC_ADDR_INFO_RING_ID GENMASK(27, 20) #define HAL_CE_DEST_DESC_ADDR_INFO_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT struct hal_ce_srng_dest_desc { u32 buffer_addr_low; u32 buffer_addr_info; /* %HAL_CE_DEST_DESC_ADDR_INFO_ */ } __packed; /* hal_ce_srng_dest_desc * * dst_buffer_low * LSB 32 bits of the 40 Bit Pointer to the Destination * buffer * * dst_buffer_high * MSB 8 bits of the 40 Bit Pointer to the Destination * buffer * * ce_res_4 * Reserved * * ring_id * The buffer pointer ring ID. * 0 refers to the IDLE ring * 1 - N refers to other rings * Helps with debugging when dumping ring contents. * * looping_count * A count value that indicates the number of times the * producer of entries into the Ring has looped around the * ring. * * At initialization time, this value is set to 0. On the * first loop, this value is set to 1. After the max value is * reached allowed by the number of bits for this field, the * count value continues with 0 again. * * In case SW is the consumer of the ring entries, it can * use this field to figure out up to where the producer of * entries has created new entries. This eliminates the need to * check where the head pointer' of the ring is located once * the SW starts processing an interrupt indicating that new * entries have been put into this ring... * * Also note that SW if it wants only needs to look at the * LSB bit of this count value. */ #define HAL_CE_DST_STATUS_DESC_FLAGS_HASH_EN BIT(8) #define HAL_CE_DST_STATUS_DESC_FLAGS_BYTE_SWAP BIT(9) #define HAL_CE_DST_STATUS_DESC_FLAGS_DEST_SWAP BIT(10) #define HAL_CE_DST_STATUS_DESC_FLAGS_GATHER BIT(11) #define HAL_CE_DST_STATUS_DESC_FLAGS_LEN GENMASK(31, 16) #define HAL_CE_DST_STATUS_DESC_META_INFO_DATA GENMASK(7, 0) #define HAL_CE_DST_STATUS_DESC_META_INFO_RING_ID GENMASK(27, 20) #define HAL_CE_DST_STATUS_DESC_META_INFO_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT struct hal_ce_srng_dst_status_desc { u32 flags; /* %HAL_CE_DST_STATUS_DESC_FLAGS_ */ u32 toeplitz_hash0; u32 toeplitz_hash1; u32 meta_info; /* HAL_CE_DST_STATUS_DESC_META_INFO_ */ } __packed; /* hal_ce_srng_dst_status_desc * * ce_res_5 * Reserved * * toeplitz_en * * src_swap * Source memory buffer swapped * * dest_swap * Destination memory buffer swapped * * gather * Gather of multiple copy engine source descriptors to one * destination enabled * * ce_res_6 * Reserved * * length * Sum of all the Lengths of the source descriptor in the * gather chain * * toeplitz_hash_0 * 32 LS bits of 64 bit Toeplitz LFSR hash result * * toeplitz_hash_1 * 32 MS bits of 64 bit Toeplitz LFSR hash result * * fw_metadata * Meta data used by FW * In case of gather field in first source ring entry of * the gather copy cycle in taken into account. * * ce_res_7 * Reserved * * ring_id * The buffer pointer ring ID. * 0 refers to the IDLE ring * 1 - N refers to other rings * Helps with debugging when dumping ring contents. * * looping_count * A count value that indicates the number of times the * producer of entries into the Ring has looped around the * ring. * * At initialization time, this value is set to 0. On the * first loop, this value is set to 1. After the max value is * reached allowed by the number of bits for this field, the * count value continues with 0 again. * * In case SW is the consumer of the ring entries, it can * use this field to figure out up to where the producer of * entries has created new entries. This eliminates the need to * check where the head pointer' of the ring is located once * the SW starts processing an interrupt indicating that new * entries have been put into this ring... * * Also note that SW if it wants only needs to look at the * LSB bit of this count value. */ #define HAL_TX_RATE_STATS_INFO0_VALID BIT(0) #define HAL_TX_RATE_STATS_INFO0_BW GENMASK(2, 1) #define HAL_TX_RATE_STATS_INFO0_PKT_TYPE GENMASK(6, 3) #define HAL_TX_RATE_STATS_INFO0_STBC BIT(7) #define HAL_TX_RATE_STATS_INFO0_LDPC BIT(8) #define HAL_TX_RATE_STATS_INFO0_SGI GENMASK(10, 9) #define HAL_TX_RATE_STATS_INFO0_MCS GENMASK(14, 11) #define HAL_TX_RATE_STATS_INFO0_OFDMA_TX BIT(15) #define HAL_TX_RATE_STATS_INFO0_TONES_IN_RU GENMASK(27, 16) enum hal_tx_rate_stats_bw { HAL_TX_RATE_STATS_BW_20, HAL_TX_RATE_STATS_BW_40, HAL_TX_RATE_STATS_BW_80, HAL_TX_RATE_STATS_BW_160, }; enum hal_tx_rate_stats_pkt_type { HAL_TX_RATE_STATS_PKT_TYPE_11A, HAL_TX_RATE_STATS_PKT_TYPE_11B, HAL_TX_RATE_STATS_PKT_TYPE_11N, HAL_TX_RATE_STATS_PKT_TYPE_11AC, HAL_TX_RATE_STATS_PKT_TYPE_11AX, }; enum hal_tx_rate_stats_sgi { HAL_TX_RATE_STATS_SGI_08US, HAL_TX_RATE_STATS_SGI_04US, HAL_TX_RATE_STATS_SGI_16US, HAL_TX_RATE_STATS_SGI_32US, }; struct hal_tx_rate_stats { u32 info0; u32 tsf; } __packed; struct hal_wbm_link_desc { struct ath11k_buffer_addr buf_addr_info; } __packed; /* hal_wbm_link_desc * * Producer: WBM * Consumer: WBM * * buf_addr_info * Details of the physical address of a buffer or MSDU * link descriptor. */ enum hal_wbm_rel_src_module { HAL_WBM_REL_SRC_MODULE_TQM, HAL_WBM_REL_SRC_MODULE_RXDMA, HAL_WBM_REL_SRC_MODULE_REO, HAL_WBM_REL_SRC_MODULE_FW, HAL_WBM_REL_SRC_MODULE_SW, }; enum hal_wbm_rel_desc_type { HAL_WBM_REL_DESC_TYPE_REL_MSDU, HAL_WBM_REL_DESC_TYPE_MSDU_LINK, HAL_WBM_REL_DESC_TYPE_MPDU_LINK, HAL_WBM_REL_DESC_TYPE_MSDU_EXT, HAL_WBM_REL_DESC_TYPE_QUEUE_EXT, }; /* hal_wbm_rel_desc_type * * msdu_buffer * The address points to an MSDU buffer * * msdu_link_descriptor * The address points to an Tx MSDU link descriptor * * mpdu_link_descriptor * The address points to an MPDU link descriptor * * msdu_ext_descriptor * The address points to an MSDU extension descriptor * * queue_ext_descriptor * The address points to an TQM queue extension descriptor. WBM should * treat this is the same way as a link descriptor. */ enum hal_wbm_rel_bm_act { HAL_WBM_REL_BM_ACT_PUT_IN_IDLE, HAL_WBM_REL_BM_ACT_REL_MSDU, }; /* hal_wbm_rel_bm_act * * put_in_idle_list * Put the buffer or descriptor back in the idle list. In case of MSDU or * MDPU link descriptor, BM does not need to check to release any * individual MSDU buffers. * * release_msdu_list * This BM action can only be used in combination with desc_type being * msdu_link_descriptor. Field first_msdu_index points out which MSDU * pointer in the MSDU link descriptor is the first of an MPDU that is * released. BM shall release all the MSDU buffers linked to this first * MSDU buffer pointer. All related MSDU buffer pointer entries shall be * set to value 0, which represents the 'NULL' pointer. When all MSDU * buffer pointers in the MSDU link descriptor are 'NULL', the MSDU link * descriptor itself shall also be released. */ #define HAL_WBM_RELEASE_INFO0_REL_SRC_MODULE GENMASK(2, 0) #define HAL_WBM_RELEASE_INFO0_BM_ACTION GENMASK(5, 3) #define HAL_WBM_RELEASE_INFO0_DESC_TYPE GENMASK(8, 6) #define HAL_WBM_RELEASE_INFO0_FIRST_MSDU_IDX GENMASK(12, 9) #define HAL_WBM_RELEASE_INFO0_TQM_RELEASE_REASON GENMASK(16, 13) #define HAL_WBM_RELEASE_INFO0_RXDMA_PUSH_REASON GENMASK(18, 17) #define HAL_WBM_RELEASE_INFO0_RXDMA_ERROR_CODE GENMASK(23, 19) #define HAL_WBM_RELEASE_INFO0_REO_PUSH_REASON GENMASK(25, 24) #define HAL_WBM_RELEASE_INFO0_REO_ERROR_CODE GENMASK(30, 26) #define HAL_WBM_RELEASE_INFO0_WBM_INTERNAL_ERROR BIT(31) #define HAL_WBM_RELEASE_INFO1_TQM_STATUS_NUMBER GENMASK(23, 0) #define HAL_WBM_RELEASE_INFO1_TRANSMIT_COUNT GENMASK(30, 24) #define HAL_WBM_RELEASE_INFO2_ACK_FRAME_RSSI GENMASK(7, 0) #define HAL_WBM_RELEASE_INFO2_SW_REL_DETAILS_VALID BIT(8) #define HAL_WBM_RELEASE_INFO2_FIRST_MSDU BIT(9) #define HAL_WBM_RELEASE_INFO2_LAST_MSDU BIT(10) #define HAL_WBM_RELEASE_INFO2_MSDU_IN_AMSDU BIT(11) #define HAL_WBM_RELEASE_INFO2_FW_TX_NOTIF_FRAME BIT(12) #define HAL_WBM_RELEASE_INFO2_BUFFER_TIMESTAMP GENMASK(31, 13) #define HAL_WBM_RELEASE_INFO3_PEER_ID GENMASK(15, 0) #define HAL_WBM_RELEASE_INFO3_TID GENMASK(19, 16) #define HAL_WBM_RELEASE_INFO3_RING_ID GENMASK(27, 20) #define HAL_WBM_RELEASE_INFO3_LOOPING_COUNT GENMASK(31, 28) #define HAL_WBM_REL_HTT_TX_COMP_INFO0_STATUS GENMASK(12, 9) #define HAL_WBM_REL_HTT_TX_COMP_INFO0_REINJ_REASON GENMASK(16, 13) #define HAL_WBM_REL_HTT_TX_COMP_INFO0_EXP_FRAME BIT(17) struct hal_wbm_release_ring { struct ath11k_buffer_addr buf_addr_info; u32 info0; u32 info1; u32 info2; struct hal_tx_rate_stats rate_stats; u32 info3; } __packed; /* hal_wbm_release_ring * * Producer: SW/TQM/RXDMA/REO/SWITCH * Consumer: WBM/SW/FW * * HTT tx status is overlayed on wbm_release ring on 4-byte words 2, 3, 4 and 5 * for software based completions. * * buf_addr_info * Details of the physical address of the buffer or link descriptor. * * release_source_module * Indicates which module initiated the release of this buffer/descriptor. * Values are defined in enum %HAL_WBM_REL_SRC_MODULE_. * * bm_action * Field only valid when the field return_buffer_manager in * Released_buff_or_desc_addr_info indicates: * WBM_IDLE_BUF_LIST / WBM_IDLE_DESC_LIST * Values are defined in enum %HAL_WBM_REL_BM_ACT_. * * buffer_or_desc_type * Field only valid when WBM is marked as the return_buffer_manager in * the Released_Buffer_address_info. Indicates that type of buffer or * descriptor is being released. Values are in enum %HAL_WBM_REL_DESC_TYPE. * * first_msdu_index * Field only valid for the bm_action release_msdu_list. The index of the * first MSDU in an MSDU link descriptor all belonging to the same MPDU. * * tqm_release_reason * Field only valid when Release_source_module is set to release_source_TQM * Release reasons are defined in enum %HAL_WBM_TQM_REL_REASON_. * * rxdma_push_reason * reo_push_reason * Indicates why rxdma/reo pushed the frame to this ring and values are * defined in enum %HAL_REO_DEST_RING_PUSH_REASON_. * * rxdma_error_code * Field only valid when 'rxdma_push_reason' set to 'error_detected'. * Values are defined in enum %HAL_REO_ENTR_RING_RXDMA_ECODE_. * * reo_error_code * Field only valid when 'reo_push_reason' set to 'error_detected'. Values * are defined in enum %HAL_REO_DEST_RING_ERROR_CODE_. * * wbm_internal_error * Is set when WBM got a buffer pointer but the action was to push it to * the idle link descriptor ring or do link related activity OR * Is set when WBM got a link buffer pointer but the action was to push it * to the buffer descriptor ring. * * tqm_status_number * The value in this field is equal to tqm_cmd_number in TQM command. It is * used to correlate the statu with TQM commands. Only valid when * release_source_module is TQM. * * transmit_count * The number of times the frame has been transmitted, valid only when * release source in TQM. * * ack_frame_rssi * This field is only valid when the source is TQM. If this frame is * removed as the result of the reception of an ACK or BA, this field * indicates the RSSI of the received ACK or BA frame. * * sw_release_details_valid * This is set when WMB got a 'release_msdu_list' command from TQM and * return buffer manager is not WMB. WBM will then de-aggregate all MSDUs * and pass them one at a time on to the 'buffer owner'. * * first_msdu * Field only valid when SW_release_details_valid is set. * When set, this MSDU is the first MSDU pointed to in the * 'release_msdu_list' command. * * last_msdu * Field only valid when SW_release_details_valid is set. * When set, this MSDU is the last MSDU pointed to in the * 'release_msdu_list' command. * * msdu_part_of_amsdu * Field only valid when SW_release_details_valid is set. * When set, this MSDU was part of an A-MSDU in MPDU * * fw_tx_notify_frame * Field only valid when SW_release_details_valid is set. * * buffer_timestamp * Field only valid when SW_release_details_valid is set. * This is the Buffer_timestamp field from the * Timestamp in units of 1024 us * * struct hal_tx_rate_stats rate_stats * Details for command execution tracking purposes. * * sw_peer_id * tid * Field only valid when Release_source_module is set to * release_source_TQM * * 1) Release of msdu buffer due to drop_frame = 1. Flow is * not fetched and hence sw_peer_id and tid = 0 * * buffer_or_desc_type = e_num 0 * MSDU_rel_buffertqm_release_reason = e_num 1 * tqm_rr_rem_cmd_rem * * 2) Release of msdu buffer due to Flow is not fetched and * hence sw_peer_id and tid = 0 * * buffer_or_desc_type = e_num 0 * MSDU_rel_buffertqm_release_reason = e_num 1 * tqm_rr_rem_cmd_rem * * 3) Release of msdu link due to remove_mpdu or acked_mpdu * command. * * buffer_or_desc_type = e_num1 * msdu_link_descriptortqm_release_reason can be:e_num 1 * tqm_rr_rem_cmd_reme_num 2 tqm_rr_rem_cmd_tx * e_num 3 tqm_rr_rem_cmd_notxe_num 4 tqm_rr_rem_cmd_aged * * This field represents the TID from the TX_MSDU_FLOW * descriptor or TX_MPDU_QUEUE descriptor * * rind_id * For debugging. * This field is filled in by the SRNG module. * It help to identify the ring that is being looked * * looping_count * A count value that indicates the number of times the * producer of entries into the Buffer Manager Ring has looped * around the ring. * * At initialization time, this value is set to 0. On the * first loop, this value is set to 1. After the max value is * reached allowed by the number of bits for this field, the * count value continues with 0 again. * * In case SW is the consumer of the ring entries, it can * use this field to figure out up to where the producer of * entries has created new entries. This eliminates the need to * check where the head pointer' of the ring is located once * the SW starts processing an interrupt indicating that new * entries have been put into this ring... * * Also note that SW if it wants only needs to look at the * LSB bit of this count value. */ /** * enum hal_wbm_tqm_rel_reason - TQM release reason code * @HAL_WBM_TQM_REL_REASON_FRAME_ACKED: ACK or BACK received for the frame * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_MPDU: Command remove_mpdus initiated by SW * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_TX: Command remove transmitted_mpdus * initiated by sw. * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_NOTX: Command remove untransmitted_mpdus * initiated by sw. * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_AGED_FRAMES: Command remove aged msdus or * mpdus. * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON1: Remove command initiated by * fw with fw_reason1. * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON2: Remove command initiated by * fw with fw_reason2. * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON3: Remove command initiated by * fw with fw_reason3. */ enum hal_wbm_tqm_rel_reason { HAL_WBM_TQM_REL_REASON_FRAME_ACKED, HAL_WBM_TQM_REL_REASON_CMD_REMOVE_MPDU, HAL_WBM_TQM_REL_REASON_CMD_REMOVE_TX, HAL_WBM_TQM_REL_REASON_CMD_REMOVE_NOTX, HAL_WBM_TQM_REL_REASON_CMD_REMOVE_AGED_FRAMES, HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON1, HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON2, HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON3, }; struct hal_wbm_buffer_ring { struct ath11k_buffer_addr buf_addr_info; }; enum hal_desc_owner { HAL_DESC_OWNER_WBM, HAL_DESC_OWNER_SW, HAL_DESC_OWNER_TQM, HAL_DESC_OWNER_RXDMA, HAL_DESC_OWNER_REO, HAL_DESC_OWNER_SWITCH, }; enum hal_desc_buf_type { HAL_DESC_BUF_TYPE_TX_MSDU_LINK, HAL_DESC_BUF_TYPE_TX_MPDU_LINK, HAL_DESC_BUF_TYPE_TX_MPDU_QUEUE_HEAD, HAL_DESC_BUF_TYPE_TX_MPDU_QUEUE_EXT, HAL_DESC_BUF_TYPE_TX_FLOW, HAL_DESC_BUF_TYPE_TX_BUFFER, HAL_DESC_BUF_TYPE_RX_MSDU_LINK, HAL_DESC_BUF_TYPE_RX_MPDU_LINK, HAL_DESC_BUF_TYPE_RX_REO_QUEUE, HAL_DESC_BUF_TYPE_RX_REO_QUEUE_EXT, HAL_DESC_BUF_TYPE_RX_BUFFER, HAL_DESC_BUF_TYPE_IDLE_LINK, }; #define HAL_DESC_REO_OWNED 4 #define HAL_DESC_REO_QUEUE_DESC 8 #define HAL_DESC_REO_QUEUE_EXT_DESC 9 #define HAL_DESC_REO_NON_QOS_TID 16 #define HAL_DESC_HDR_INFO0_OWNER GENMASK(3, 0) #define HAL_DESC_HDR_INFO0_BUF_TYPE GENMASK(7, 4) #define HAL_DESC_HDR_INFO0_DBG_RESERVED GENMASK(31, 8) struct hal_desc_header { u32 info0; } __packed; struct hal_rx_mpdu_link_ptr { struct ath11k_buffer_addr addr_info; } __packed; struct hal_rx_msdu_details { struct ath11k_buffer_addr buf_addr_info; struct rx_msdu_desc rx_msdu_info; } __packed; #define HAL_RX_MSDU_LNK_INFO0_RX_QUEUE_NUMBER GENMASK(15, 0) #define HAL_RX_MSDU_LNK_INFO0_FIRST_MSDU_LNK BIT(16) struct hal_rx_msdu_link { struct hal_desc_header desc_hdr; struct ath11k_buffer_addr buf_addr_info; u32 info0; u32 pn[4]; struct hal_rx_msdu_details msdu_link[6]; } __packed; struct hal_rx_reo_queue_ext { struct hal_desc_header desc_hdr; u32 rsvd; struct hal_rx_mpdu_link_ptr mpdu_link[15]; } __packed; /* hal_rx_reo_queue_ext * Consumer: REO * Producer: REO * * descriptor_header * Details about which module owns this struct. * * mpdu_link * Pointer to the next MPDU_link descriptor in the MPDU queue. */ enum hal_rx_reo_queue_pn_size { HAL_RX_REO_QUEUE_PN_SIZE_24, HAL_RX_REO_QUEUE_PN_SIZE_48, HAL_RX_REO_QUEUE_PN_SIZE_128, }; #define HAL_RX_REO_QUEUE_RX_QUEUE_NUMBER GENMASK(15, 0) #define HAL_RX_REO_QUEUE_INFO0_VLD BIT(0) #define HAL_RX_REO_QUEUE_INFO0_ASSOC_LNK_DESC_COUNTER GENMASK(2, 1) #define HAL_RX_REO_QUEUE_INFO0_DIS_DUP_DETECTION BIT(3) #define HAL_RX_REO_QUEUE_INFO0_SOFT_REORDER_EN BIT(4) #define HAL_RX_REO_QUEUE_INFO0_AC GENMASK(6, 5) #define HAL_RX_REO_QUEUE_INFO0_BAR BIT(7) #define HAL_RX_REO_QUEUE_INFO0_RETRY BIT(8) #define HAL_RX_REO_QUEUE_INFO0_CHECK_2K_MODE BIT(9) #define HAL_RX_REO_QUEUE_INFO0_OOR_MODE BIT(10) #define HAL_RX_REO_QUEUE_INFO0_BA_WINDOW_SIZE GENMASK(18, 11) #define HAL_RX_REO_QUEUE_INFO0_PN_CHECK BIT(19) #define HAL_RX_REO_QUEUE_INFO0_EVEN_PN BIT(20) #define HAL_RX_REO_QUEUE_INFO0_UNEVEN_PN BIT(21) #define HAL_RX_REO_QUEUE_INFO0_PN_HANDLE_ENABLE BIT(22) #define HAL_RX_REO_QUEUE_INFO0_PN_SIZE GENMASK(24, 23) #define HAL_RX_REO_QUEUE_INFO0_IGNORE_AMPDU_FLG BIT(25) #define HAL_RX_REO_QUEUE_INFO1_SVLD BIT(0) #define HAL_RX_REO_QUEUE_INFO1_SSN GENMASK(12, 1) #define HAL_RX_REO_QUEUE_INFO1_CURRENT_IDX GENMASK(20, 13) #define HAL_RX_REO_QUEUE_INFO1_SEQ_2K_ERR BIT(21) #define HAL_RX_REO_QUEUE_INFO1_PN_ERR BIT(22) #define HAL_RX_REO_QUEUE_INFO1_PN_VALID BIT(31) #define HAL_RX_REO_QUEUE_INFO2_MPDU_COUNT GENMASK(6, 0) #define HAL_RX_REO_QUEUE_INFO2_MSDU_COUNT (31, 7) #define HAL_RX_REO_QUEUE_INFO3_TIMEOUT_COUNT GENMASK(9, 4) #define HAL_RX_REO_QUEUE_INFO3_FWD_DUE_TO_BAR_CNT GENMASK(15, 10) #define HAL_RX_REO_QUEUE_INFO3_DUPLICATE_COUNT GENMASK(31, 10) #define HAL_RX_REO_QUEUE_INFO4_FRAME_IN_ORD_COUNT GENMASK(23, 0) #define HAL_RX_REO_QUEUE_INFO4_BAR_RECVD_COUNT GENMASK(31, 24) #define HAL_RX_REO_QUEUE_INFO5_LATE_RX_MPDU_COUNT GENMASK(11, 0) #define HAL_RX_REO_QUEUE_INFO5_WINDOW_JUMP_2K GENMASK(15, 12) #define HAL_RX_REO_QUEUE_INFO5_HOLE_COUNT GENMASK(31, 16) struct hal_rx_reo_queue { struct hal_desc_header desc_hdr; u32 rx_queue_num; u32 info0; u32 info1; u32 pn[4]; u32 last_rx_enqueue_timestamp; u32 last_rx_dequeue_timestamp; u32 next_aging_queue[2]; u32 prev_aging_queue[2]; u32 rx_bitmap[8]; u32 info2; u32 info3; u32 info4; u32 processed_mpdus; u32 processed_msdus; u32 processed_total_bytes; u32 info5; u32 rsvd[3]; struct hal_rx_reo_queue_ext ext_desc[]; } __packed; /* hal_rx_reo_queue * * descriptor_header * Details about which module owns this struct. Note that sub field * Buffer_type shall be set to receive_reo_queue_descriptor. * * receive_queue_number * Indicates the MPDU queue ID to which this MPDU link descriptor belongs. * * vld * Valid bit indicating a session is established and the queue descriptor * is valid. * associated_link_descriptor_counter * Indicates which of the 3 link descriptor counters shall be incremented * or decremented when link descriptors are added or removed from this * flow queue. * disable_duplicate_detection * When set, do not perform any duplicate detection. * soft_reorder_enable * When set, REO has been instructed to not perform the actual re-ordering * of frames for this queue, but just to insert the reorder opcodes. * ac * Indicates the access category of the queue descriptor. * bar * Indicates if BAR has been received. * retry * Retry bit is checked if this bit is set. * chk_2k_mode * Indicates what type of operation is expected from Reo when the received * frame SN falls within the 2K window. * oor_mode * Indicates what type of operation is expected when the received frame * falls within the OOR window. * ba_window_size * Indicates the negotiated (window size + 1). Max of 256 bits. * * A value 255 means 256 bitmap, 63 means 64 bitmap, 0 (means non-BA * session, with window size of 0). The 3 values here are the main values * validated, but other values should work as well. * * A BA window size of 0 (=> one frame entry bitmat), means that there is * no additional rx_reo_queue_ext desc. following rx_reo_queue in memory. * A BA window size of 1 - 105, means that there is 1 rx_reo_queue_ext. * A BA window size of 106 - 210, means that there are 2 rx_reo_queue_ext. * A BA window size of 211 - 256, means that there are 3 rx_reo_queue_ext. * pn_check_needed, pn_shall_be_even, pn_shall_be_uneven, pn_handling_enable, * pn_size * REO shall perform the PN increment check, even number check, uneven * number check, PN error check and size of the PN field check. * ignore_ampdu_flag * REO shall ignore the ampdu_flag on entrance descriptor for this queue. * * svld * Sequence number in next field is valid one. * ssn * Starting Sequence number of the session. * current_index * Points to last forwarded packet * seq_2k_error_detected_flag * REO has detected a 2k error jump in the sequence number and from that * moment forward, all new frames are forwarded directly to FW, without * duplicate detect, reordering, etc. * pn_error_detected_flag * REO has detected a PN error. */ #define HAL_REO_UPD_RX_QUEUE_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_RX_QUEUE_NUM BIT(8) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_VLD BIT(9) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_ASSOC_LNK_DESC_CNT BIT(10) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_DIS_DUP_DETECTION BIT(11) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SOFT_REORDER_EN BIT(12) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_AC BIT(13) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_BAR BIT(14) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_RETRY BIT(15) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_CHECK_2K_MODE BIT(16) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_OOR_MODE BIT(17) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_BA_WINDOW_SIZE BIT(18) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_CHECK BIT(19) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_EVEN_PN BIT(20) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_UNEVEN_PN BIT(21) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_HANDLE_ENABLE BIT(22) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_SIZE BIT(23) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_IGNORE_AMPDU_FLG BIT(24) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SVLD BIT(25) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SSN BIT(26) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SEQ_2K_ERR BIT(27) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_ERR BIT(28) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_VALID BIT(29) #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN BIT(30) #define HAL_REO_UPD_RX_QUEUE_INFO1_RX_QUEUE_NUMBER GENMASK(15, 0) #define HAL_REO_UPD_RX_QUEUE_INFO1_VLD BIT(16) #define HAL_REO_UPD_RX_QUEUE_INFO1_ASSOC_LNK_DESC_COUNTER GENMASK(18, 17) #define HAL_REO_UPD_RX_QUEUE_INFO1_DIS_DUP_DETECTION BIT(19) #define HAL_REO_UPD_RX_QUEUE_INFO1_SOFT_REORDER_EN BIT(20) #define HAL_REO_UPD_RX_QUEUE_INFO1_AC GENMASK(22, 21) #define HAL_REO_UPD_RX_QUEUE_INFO1_BAR BIT(23) #define HAL_REO_UPD_RX_QUEUE_INFO1_RETRY BIT(24) #define HAL_REO_UPD_RX_QUEUE_INFO1_CHECK_2K_MODE BIT(25) #define HAL_REO_UPD_RX_QUEUE_INFO1_OOR_MODE BIT(26) #define HAL_REO_UPD_RX_QUEUE_INFO1_PN_CHECK BIT(27) #define HAL_REO_UPD_RX_QUEUE_INFO1_EVEN_PN BIT(28) #define HAL_REO_UPD_RX_QUEUE_INFO1_UNEVEN_PN BIT(29) #define HAL_REO_UPD_RX_QUEUE_INFO1_PN_HANDLE_ENABLE BIT(30) #define HAL_REO_UPD_RX_QUEUE_INFO1_IGNORE_AMPDU_FLG BIT(31) #define HAL_REO_UPD_RX_QUEUE_INFO2_BA_WINDOW_SIZE GENMASK(7, 0) #define HAL_REO_UPD_RX_QUEUE_INFO2_PN_SIZE GENMASK(9, 8) #define HAL_REO_UPD_RX_QUEUE_INFO2_SVLD BIT(10) #define HAL_REO_UPD_RX_QUEUE_INFO2_SSN GENMASK(22, 11) #define HAL_REO_UPD_RX_QUEUE_INFO2_SEQ_2K_ERR BIT(23) #define HAL_REO_UPD_RX_QUEUE_INFO2_PN_ERR BIT(24) #define HAL_REO_UPD_RX_QUEUE_INFO2_PN_VALID BIT(25) struct hal_reo_update_rx_queue { struct hal_reo_cmd_hdr cmd; u32 queue_addr_lo; u32 info0; u32 info1; u32 info2; u32 pn[4]; } __packed; #define HAL_REO_UNBLOCK_CACHE_INFO0_UNBLK_CACHE BIT(0) #define HAL_REO_UNBLOCK_CACHE_INFO0_RESOURCE_IDX GENMASK(2, 1) struct hal_reo_unblock_cache { struct hal_reo_cmd_hdr cmd; u32 info0; u32 rsvd[7]; } __packed; enum hal_reo_exec_status { HAL_REO_EXEC_STATUS_SUCCESS, HAL_REO_EXEC_STATUS_BLOCKED, HAL_REO_EXEC_STATUS_FAILED, HAL_REO_EXEC_STATUS_RESOURCE_BLOCKED, }; #define HAL_REO_STATUS_HDR_INFO0_STATUS_NUM GENMASK(15, 0) #define HAL_REO_STATUS_HDR_INFO0_EXEC_TIME GENMASK(25, 16) #define HAL_REO_STATUS_HDR_INFO0_EXEC_STATUS GENMASK(27, 26) struct hal_reo_status_hdr { u32 info0; u32 timestamp; } __packed; /* hal_reo_status_hdr * Producer: REO * Consumer: SW * * status_num * The value in this field is equal to value of the reo command * number. This field helps to correlate the statuses with the REO * commands. * * execution_time (in us) * The amount of time REO took to excecute the command. Note that * this time does not include the duration of the command waiting * in the command ring, before the execution started. * * execution_status * Execution status of the command. Values are defined in * enum %HAL_REO_EXEC_STATUS_. */ #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO0_SSN GENMASK(11, 0) #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO0_CUR_IDX GENMASK(19, 12) #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO1_MPDU_COUNT GENMASK(6, 0) #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO1_MSDU_COUNT GENMASK(31, 7) #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_TIMEOUT_COUNT GENMASK(9, 4) #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_FDTB_COUNT GENMASK(15, 10) #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_DUPLICATE_COUNT GENMASK(31, 16) #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO3_FIO_COUNT GENMASK(23, 0) #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO3_BAR_RCVD_CNT GENMASK(31, 24) #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_LATE_RX_MPDU GENMASK(11, 0) #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_WINDOW_JMP2K GENMASK(15, 12) #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_HOLE_COUNT GENMASK(31, 16) #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO5_LOOPING_CNT GENMASK(31, 28) struct hal_reo_get_queue_stats_status { struct hal_reo_status_hdr hdr; u32 info0; u32 pn[4]; u32 last_rx_enqueue_timestamp; u32 last_rx_dequeue_timestamp; u32 rx_bitmap[8]; u32 info1; u32 info2; u32 info3; u32 num_mpdu_frames; u32 num_msdu_frames; u32 total_bytes; u32 info4; u32 info5; } __packed; /* hal_reo_get_queue_stats_status * Producer: REO * Consumer: SW * * status_hdr * Details that can link this status with the original command. It * also contains info on how long REO took to execute this command. * * ssn * Starting Sequence number of the session, this changes whenever * window moves (can be filled by SW then maintained by REO). * * current_index * Points to last forwarded packet. * * pn * Bits of the PN number. * * last_rx_enqueue_timestamp * last_rx_dequeue_timestamp * Timestamp of arrival of the last MPDU for this queue and * Timestamp of forwarding an MPDU accordingly. * * rx_bitmap * When a bit is set, the corresponding frame is currently held * in the re-order queue. The bitmap is Fully managed by HW. * * current_mpdu_count * current_msdu_count * The number of MPDUs and MSDUs in the queue. * * timeout_count * The number of times REO started forwarding frames even though * there is a hole in the bitmap. Forwarding reason is timeout. * * forward_due_to_bar_count * The number of times REO started forwarding frames even though * there is a hole in the bitmap. Fwd reason is reception of BAR. * * duplicate_count * The number of duplicate frames that have been detected. * * frames_in_order_count * The number of frames that have been received in order (without * a hole that prevented them from being forwarded immediately). * * bar_received_count * The number of times a BAR frame is received. * * mpdu_frames_processed_count * msdu_frames_processed_count * The total number of MPDU/MSDU frames that have been processed. * * total_bytes * An approximation of the number of bytes received for this queue. * * late_receive_mpdu_count * The number of MPDUs received after the window had already moved * on. The 'late' sequence window is defined as * (Window SSN - 256) - (Window SSN - 1). * * window_jump_2k * The number of times the window moved more than 2K * * hole_count * The number of times a hole was created in the receive bitmap. * * looping_count * A count value that indicates the number of times the producer of * entries into this Ring has looped around the ring. */ #define HAL_REO_STATUS_LOOP_CNT GENMASK(31, 28) #define HAL_REO_FLUSH_QUEUE_INFO0_ERR_DETECTED BIT(0) #define HAL_REO_FLUSH_QUEUE_INFO0_RSVD GENMASK(31, 1) #define HAL_REO_FLUSH_QUEUE_INFO1_RSVD GENMASK(27, 0) struct hal_reo_flush_queue_status { struct hal_reo_status_hdr hdr; u32 info0; u32 rsvd0[21]; u32 info1; } __packed; /* hal_reo_flush_queue_status * Producer: REO * Consumer: SW * * status_hdr * Details that can link this status with the original command. It * also contains info on how long REO took to execute this command. * * error_detected * Status of blocking resource * * 0 - No error has been detected while executing this command * 1 - Error detected. The resource to be used for blocking was * already in use. * * looping_count * A count value that indicates the number of times the producer of * entries into this Ring has looped around the ring. */ #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_IS_ERR BIT(0) #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_BLOCK_ERR_CODE GENMASK(2, 1) #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_STATUS_HIT BIT(8) #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_DESC_TYPE GENMASK(11, 9) #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_CLIENT_ID GENMASK(15, 12) #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_ERR GENMASK(17, 16) #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_COUNT GENMASK(25, 18) struct hal_reo_flush_cache_status { struct hal_reo_status_hdr hdr; u32 info0; u32 rsvd0[21]; u32 info1; } __packed; /* hal_reo_flush_cache_status * Producer: REO * Consumer: SW * * status_hdr * Details that can link this status with the original command. It * also contains info on how long REO took to execute this command. * * error_detected * Status for blocking resource handling * * 0 - No error has been detected while executing this command * 1 - An error in the blocking resource management was detected * * block_error_details * only valid when error_detected is set * * 0 - No blocking related errors found * 1 - Blocking resource is already in use * 2 - Resource requested to be unblocked, was not blocked * * cache_controller_flush_status_hit * The status that the cache controller returned on executing the * flush command. * * 0 - miss; 1 - hit * * cache_controller_flush_status_desc_type * Flush descriptor type * * cache_controller_flush_status_client_id * Module who made the flush request * * In REO, this is always 0 * * cache_controller_flush_status_error * Error condition * * 0 - No error found * 1 - HW interface is still busy * 2 - Line currently locked. Used for one line flush command * 3 - At least one line is still locked. * Used for cache flush command. * * cache_controller_flush_count * The number of lines that were actually flushed out * * looping_count * A count value that indicates the number of times the producer of * entries into this Ring has looped around the ring. */ #define HAL_REO_UNBLOCK_CACHE_STATUS_INFO0_IS_ERR BIT(0) #define HAL_REO_UNBLOCK_CACHE_STATUS_INFO0_TYPE BIT(1) struct hal_reo_unblock_cache_status { struct hal_reo_status_hdr hdr; u32 info0; u32 rsvd0[21]; u32 info1; } __packed; /* hal_reo_unblock_cache_status * Producer: REO * Consumer: SW * * status_hdr * Details that can link this status with the original command. It * also contains info on how long REO took to execute this command. * * error_detected * 0 - No error has been detected while executing this command * 1 - The blocking resource was not in use, and therefore it could * not be unblocked. * * unblock_type * Reference to the type of unblock command * 0 - Unblock a blocking resource * 1 - The entire cache usage is unblock * * looping_count * A count value that indicates the number of times the producer of * entries into this Ring has looped around the ring. */ #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO0_IS_ERR BIT(0) #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO0_LIST_EMPTY BIT(1) #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO1_REL_DESC_COUNT GENMASK(15, 0) #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO1_FWD_BUF_COUNT GENMASK(31, 16) struct hal_reo_flush_timeout_list_status { struct hal_reo_status_hdr hdr; u32 info0; u32 info1; u32 rsvd0[20]; u32 info2; } __packed; /* hal_reo_flush_timeout_list_status * Producer: REO * Consumer: SW * * status_hdr * Details that can link this status with the original command. It * also contains info on how long REO took to execute this command. * * error_detected * 0 - No error has been detected while executing this command * 1 - Command not properly executed and returned with error * * timeout_list_empty * When set, REO has depleted the timeout list and all entries are * gone. * * release_desc_count * Producer: SW; Consumer: REO * The number of link descriptor released * * forward_buf_count * Producer: SW; Consumer: REO * The number of buffers forwarded to the REO destination rings * * looping_count * A count value that indicates the number of times the producer of * entries into this Ring has looped around the ring. */ #define HAL_REO_DESC_THRESH_STATUS_INFO0_THRESH_INDEX GENMASK(1, 0) #define HAL_REO_DESC_THRESH_STATUS_INFO1_LINK_DESC_COUNTER0 GENMASK(23, 0) #define HAL_REO_DESC_THRESH_STATUS_INFO2_LINK_DESC_COUNTER1 GENMASK(23, 0) #define HAL_REO_DESC_THRESH_STATUS_INFO3_LINK_DESC_COUNTER2 GENMASK(23, 0) #define HAL_REO_DESC_THRESH_STATUS_INFO4_LINK_DESC_COUNTER_SUM GENMASK(23, 0) struct hal_reo_desc_thresh_reached_status { struct hal_reo_status_hdr hdr; u32 info0; u32 info1; u32 info2; u32 info3; u32 info4; u32 rsvd0[17]; u32 info5; } __packed; /* hal_reo_desc_thresh_reached_status * Producer: REO * Consumer: SW * * status_hdr * Details that can link this status with the original command. It * also contains info on how long REO took to execute this command. * * threshold_index * The index of the threshold register whose value got reached * * link_descriptor_counter0 * link_descriptor_counter1 * link_descriptor_counter2 * link_descriptor_counter_sum * Value of the respective counters at generation of this message * * looping_count * A count value that indicates the number of times the producer of * entries into this Ring has looped around the ring. */ #endif /* ATH11K_HAL_DESC_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1