Contributors: 23
Author Tokens Token Proportion Commits Commit Proportion
Luciano Coelho 491 29.17% 30 26.09%
Johannes Berg 461 27.39% 17 14.78%
Emmanuel Grumbach 269 15.98% 6 5.22%
Oren Givon 80 4.75% 10 8.70%
Chaya Rachel Ivgy 65 3.86% 2 1.74%
Ihab Zhaika 60 3.57% 7 6.09%
Shahar S Matityahu 46 2.73% 2 1.74%
Eyal Shapira 43 2.55% 3 2.61%
striebit 38 2.26% 4 3.48%
Eran Harary 34 2.02% 8 6.96%
Ido Yariv 24 1.43% 2 1.74%
Sara Sharon 16 0.95% 7 6.09%
Liad Kaufman 12 0.71% 2 1.74%
Haim Dreyfuss 10 0.59% 2 1.74%
Golan Ben-Ami 8 0.48% 3 2.61%
Eytan Lifshitz 6 0.36% 1 0.87%
Gregory Greenman 5 0.30% 2 1.74%
Eliad Peller 4 0.24% 1 0.87%
Naftali Goldstein 4 0.24% 1 0.87%
Avraham Stern 3 0.18% 1 0.87%
Avri Altman 2 0.12% 2 1.74%
Paul Bolle 1 0.06% 1 0.87%
Tzipi Peres 1 0.06% 1 0.87%
Total 1683 115 


/******************************************************************************
 *
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright (C) 2016 - 2017 Intel Deutschland GmbH
 * Copyright(c) 2007 - 2014, 2018 - 2020 Intel Corporation
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * The full GNU General Public License is included in this distribution
 * in the file called COPYING.
 *
 * Contact Information:
 *  Intel Linux Wireless <linuxwifi@intel.com>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 * BSD LICENSE
 *
 * Copyright (C) 2016 - 2017 Intel Deutschland GmbH
 * Copyright(c) 2005 - 2014, 2018 - 2020 Intel Corporation
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *****************************************************************************/
#ifndef __IWL_CONFIG_H__
#define __IWL_CONFIG_H__

#include <linux/types.h>
#include <linux/netdevice.h>
#include <linux/ieee80211.h>
#include <linux/nl80211.h>
#include "iwl-csr.h"

enum iwl_device_family {
	IWL_DEVICE_FAMILY_UNDEFINED,
	IWL_DEVICE_FAMILY_1000,
	IWL_DEVICE_FAMILY_100,
	IWL_DEVICE_FAMILY_2000,
	IWL_DEVICE_FAMILY_2030,
	IWL_DEVICE_FAMILY_105,
	IWL_DEVICE_FAMILY_135,
	IWL_DEVICE_FAMILY_5000,
	IWL_DEVICE_FAMILY_5150,
	IWL_DEVICE_FAMILY_6000,
	IWL_DEVICE_FAMILY_6000i,
	IWL_DEVICE_FAMILY_6005,
	IWL_DEVICE_FAMILY_6030,
	IWL_DEVICE_FAMILY_6050,
	IWL_DEVICE_FAMILY_6150,
	IWL_DEVICE_FAMILY_7000,
	IWL_DEVICE_FAMILY_8000,
	IWL_DEVICE_FAMILY_9000,
	IWL_DEVICE_FAMILY_22000,
	IWL_DEVICE_FAMILY_AX210,
};

/*
 * LED mode
 *    IWL_LED_DEFAULT:  use device default
 *    IWL_LED_RF_STATE: turn LED on/off based on RF state
 *			LED ON  = RF ON
 *			LED OFF = RF OFF
 *    IWL_LED_BLINK:    adjust led blink rate based on blink table
 *    IWL_LED_DISABLE:	led disabled
 */
enum iwl_led_mode {
	IWL_LED_DEFAULT,
	IWL_LED_RF_STATE,
	IWL_LED_BLINK,
	IWL_LED_DISABLE,
};

/**
 * enum iwl_nvm_type - nvm formats
 * @IWL_NVM: the regular format
 * @IWL_NVM_EXT: extended NVM format
 * @IWL_NVM_SDP: NVM format used by 3168 series
 */
enum iwl_nvm_type {
	IWL_NVM,
	IWL_NVM_EXT,
	IWL_NVM_SDP,
};

/*
 * This is the threshold value of plcp error rate per 100mSecs.  It is
 * used to set and check for the validity of plcp_delta.
 */
#define IWL_MAX_PLCP_ERR_THRESHOLD_MIN		1
#define IWL_MAX_PLCP_ERR_THRESHOLD_DEF		50
#define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF	100
#define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF	200
#define IWL_MAX_PLCP_ERR_THRESHOLD_MAX		255
#define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE	0

/* TX queue watchdog timeouts in mSecs */
#define IWL_WATCHDOG_DISABLED	0
#define IWL_DEF_WD_TIMEOUT	2500
#define IWL_LONG_WD_TIMEOUT	10000
#define IWL_MAX_WD_TIMEOUT	120000

#define IWL_DEFAULT_MAX_TX_POWER 22
#define IWL_TX_CSUM_NETIF_FLAGS (NETIF_F_IPV6_CSUM | NETIF_F_IP_CSUM |\
				 NETIF_F_TSO | NETIF_F_TSO6)

/* Antenna presence definitions */
#define	ANT_NONE	0x0
#define	ANT_INVALID	0xff
#define	ANT_A		BIT(0)
#define	ANT_B		BIT(1)
#define ANT_C		BIT(2)
#define	ANT_AB		(ANT_A | ANT_B)
#define	ANT_AC		(ANT_A | ANT_C)
#define ANT_BC		(ANT_B | ANT_C)
#define ANT_ABC		(ANT_A | ANT_B | ANT_C)
#define MAX_ANT_NUM 3


static inline u8 num_of_ant(u8 mask)
{
	return  !!((mask) & ANT_A) +
		!!((mask) & ANT_B) +
		!!((mask) & ANT_C);
}

/**
 * struct iwl_base_params - params not likely to change within a device family
 * @max_ll_items: max number of OTP blocks
 * @shadow_ram_support: shadow support for OTP memory
 * @led_compensation: compensate on the led on/off time per HW according
 *	to the deviation to achieve the desired led frequency.
 *	The detail algorithm is described in iwl-led.c
 * @wd_timeout: TX queues watchdog timeout
 * @max_event_log_size: size of event log buffer size for ucode event logging
 * @shadow_reg_enable: HW shadow register support
 * @apmg_wake_up_wa: should the MAC access REQ be asserted when a command
 *	is in flight. This is due to a HW bug in 7260, 3160 and 7265.
 * @scd_chain_ext_wa: should the chain extension feature in SCD be disabled.
 * @max_tfd_queue_size: max number of entries in tfd queue.
 */
struct iwl_base_params {
	unsigned int wd_timeout;

	u16 eeprom_size;
	u16 max_event_log_size;

	u8 pll_cfg:1, /* for iwl_pcie_apm_init() */
	   shadow_ram_support:1,
	   shadow_reg_enable:1,
	   pcie_l1_allowed:1,
	   apmg_wake_up_wa:1,
	   scd_chain_ext_wa:1;

	u16 num_of_queues;	/* def: HW dependent */
	u32 max_tfd_queue_size;	/* def: HW dependent */

	u8 max_ll_items;
	u8 led_compensation;
};

/*
 * @stbc: support Tx STBC and 1*SS Rx STBC
 * @ldpc: support Tx/Rx with LDPC
 * @use_rts_for_aggregation: use rts/cts protection for HT traffic
 * @ht40_bands: bitmap of bands (using %NL80211_BAND_*) that support HT40
 */
struct iwl_ht_params {
	u8 ht_greenfield_support:1,
	   stbc:1,
	   ldpc:1,
	   use_rts_for_aggregation:1;
	u8 ht40_bands;
};

/*
 * Tx-backoff threshold
 * @temperature: The threshold in Celsius
 * @backoff: The tx-backoff in uSec
 */
struct iwl_tt_tx_backoff {
	s32 temperature;
	u32 backoff;
};

#define TT_TX_BACKOFF_SIZE 6

/**
 * struct iwl_tt_params - thermal throttling parameters
 * @ct_kill_entry: CT Kill entry threshold
 * @ct_kill_exit: CT Kill exit threshold
 * @ct_kill_duration: The time  intervals (in uSec) in which the driver needs
 *	to checks whether to exit CT Kill.
 * @dynamic_smps_entry: Dynamic SMPS entry threshold
 * @dynamic_smps_exit: Dynamic SMPS exit threshold
 * @tx_protection_entry: TX protection entry threshold
 * @tx_protection_exit: TX protection exit threshold
 * @tx_backoff: Array of thresholds for tx-backoff , in ascending order.
 * @support_ct_kill: Support CT Kill?
 * @support_dynamic_smps: Support dynamic SMPS?
 * @support_tx_protection: Support tx protection?
 * @support_tx_backoff: Support tx-backoff?
 */
struct iwl_tt_params {
	u32 ct_kill_entry;
	u32 ct_kill_exit;
	u32 ct_kill_duration;
	u32 dynamic_smps_entry;
	u32 dynamic_smps_exit;
	u32 tx_protection_entry;
	u32 tx_protection_exit;
	struct iwl_tt_tx_backoff tx_backoff[TT_TX_BACKOFF_SIZE];
	u8 support_ct_kill:1,
	   support_dynamic_smps:1,
	   support_tx_protection:1,
	   support_tx_backoff:1;
};

/*
 * information on how to parse the EEPROM
 */
#define EEPROM_REG_BAND_1_CHANNELS		0x08
#define EEPROM_REG_BAND_2_CHANNELS		0x26
#define EEPROM_REG_BAND_3_CHANNELS		0x42
#define EEPROM_REG_BAND_4_CHANNELS		0x5C
#define EEPROM_REG_BAND_5_CHANNELS		0x74
#define EEPROM_REG_BAND_24_HT40_CHANNELS	0x82
#define EEPROM_REG_BAND_52_HT40_CHANNELS	0x92
#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS	0x80
#define EEPROM_REGULATORY_BAND_NO_HT40		0

/* lower blocks contain EEPROM image and calibration data */
#define OTP_LOW_IMAGE_SIZE_2K		(2 * 512 * sizeof(u16))  /*  2 KB */
#define OTP_LOW_IMAGE_SIZE_16K		(16 * 512 * sizeof(u16)) /* 16 KB */
#define OTP_LOW_IMAGE_SIZE_32K		(32 * 512 * sizeof(u16)) /* 32 KB */

struct iwl_eeprom_params {
	const u8 regulatory_bands[7];
	bool enhanced_txpower;
};

/* Tx-backoff power threshold
 * @pwr: The power limit in mw
 * @backoff: The tx-backoff in uSec
 */
struct iwl_pwr_tx_backoff {
	u32 pwr;
	u32 backoff;
};

enum iwl_cfg_trans_ltr_delay {
	IWL_CFG_TRANS_LTR_DELAY_NONE	= 0,
	IWL_CFG_TRANS_LTR_DELAY_200US	= 1,
	IWL_CFG_TRANS_LTR_DELAY_2500US	= 2,
	IWL_CFG_TRANS_LTR_DELAY_1820US	= 3,
};

/**
 * struct iwl_cfg_trans - information needed to start the trans
 *
 * These values are specific to the device ID and do not change when
 * multiple configs are used for a single device ID.  They values are
 * used, among other things, to boot the NIC so that the HW REV or
 * RFID can be read before deciding the remaining parameters to use.
 *
 * @base_params: pointer to basic parameters
 * @csr: csr flags and addresses that are different across devices
 * @device_family: the device family
 * @umac_prph_offset: offset to add to UMAC periphery address
 * @xtal_latency: power up latency to get the xtal stabilized
 * @extra_phy_cfg_flags: extra configuration flags to pass to the PHY
 * @rf_id: need to read rf_id to determine the firmware image
 * @use_tfh: use TFH
 * @gen2: 22000 and on transport operation
 * @mq_rx_supported: multi-queue rx support
 * @integrated: discrete or integrated
 * @low_latency_xtal: use the low latency xtal if supported
 * @ltr_delay: LTR delay parameter, &enum iwl_cfg_trans_ltr_delay.
 */
struct iwl_cfg_trans_params {
	const struct iwl_base_params *base_params;
	enum iwl_device_family device_family;
	u32 umac_prph_offset;
	u32 xtal_latency;
	u32 extra_phy_cfg_flags;
	u32 rf_id:1,
	    use_tfh:1,
	    gen2:1,
	    mq_rx_supported:1,
	    integrated:1,
	    low_latency_xtal:1,
	    bisr_workaround:1,
	    ltr_delay:2;
};

/**
 * struct iwl_fw_mon_reg - FW monitor register info
 * @addr: register address
 * @mask: register mask
 */
struct iwl_fw_mon_reg {
	u32 addr;
	u32 mask;
};

/**
 * struct iwl_fw_mon_regs - FW monitor registers
 * @write_ptr: write pointer register
 * @cycle_cnt: cycle count register
 * @cur_frag: current fragment in use
 */
struct iwl_fw_mon_regs {
	struct iwl_fw_mon_reg write_ptr;
	struct iwl_fw_mon_reg cycle_cnt;
	struct iwl_fw_mon_reg cur_frag;
};

/**
 * struct iwl_cfg
 * @trans: the trans-specific configuration part
 * @name: Official name of the device
 * @fw_name_pre: Firmware filename prefix. The api version and extension
 *	(.ucode) will be added to filename before loading from disk. The
 *	filename is constructed as fw_name_pre<api>.ucode.
 * @ucode_api_max: Highest version of uCode API supported by driver.
 * @ucode_api_min: Lowest version of uCode API supported by driver.
 * @max_inst_size: The maximal length of the fw inst section (only DVM)
 * @max_data_size: The maximal length of the fw data section (only DVM)
 * @valid_tx_ant: valid transmit antenna
 * @valid_rx_ant: valid receive antenna
 * @non_shared_ant: the antenna that is for WiFi only
 * @nvm_ver: NVM version
 * @nvm_calib_ver: NVM calibration version
 * @lib: pointer to the lib ops
 * @ht_params: point to ht parameters
 * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
 * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
 * @tx_with_siso_diversity: 1x1 device with tx antenna diversity
 * @internal_wimax_coex: internal wifi/wimax combo device
 * @high_temp: Is this NIC is designated to be in high temperature.
 * @host_interrupt_operation_mode: device needs host interrupt operation
 *	mode set
 * @nvm_hw_section_num: the ID of the HW NVM section
 * @mac_addr_from_csr: read HW address from CSR registers
 * @features: hw features, any combination of feature_whitelist
 * @pwr_tx_backoffs: translation table between power limits and backoffs
 * @max_tx_agg_size: max TX aggregation size of the ADDBA request/response
 * @max_ht_ampdu_factor: the exponent of the max length of A-MPDU that the
 *	station can receive in HT
 * @max_vht_ampdu_exponent: the exponent of the max length of A-MPDU that the
 *	station can receive in VHT
 * @dccm_offset: offset from which DCCM begins
 * @dccm_len: length of DCCM (including runtime stack CCM)
 * @dccm2_offset: offset from which the second DCCM begins
 * @dccm2_len: length of the second DCCM
 * @smem_offset: offset from which the SMEM begins
 * @smem_len: the length of SMEM
 * @vht_mu_mimo_supported: VHT MU-MIMO support
 * @cdb: CDB support
 * @nvm_type: see &enum iwl_nvm_type
 * @d3_debug_data_base_addr: base address where D3 debug data is stored
 * @d3_debug_data_length: length of the D3 debug data
 * @bisr_workaround: BISR hardware workaround (for 22260 series devices)
 * @min_txq_size: minimum number of slots required in a TX queue
 * @uhb_supported: ultra high band channels supported
 * @min_256_ba_txq_size: minimum number of slots required in a TX queue which
 *	supports 256 BA aggregation
 * @num_rbds: number of receive buffer descriptors to use
 *	(only used for multi-queue capable devices)
 *
 * We enable the driver to be backward compatible wrt. hardware features.
 * API differences in uCode shouldn't be handled here but through TLVs
 * and/or the uCode API version instead.
 */
struct iwl_cfg {
	struct iwl_cfg_trans_params trans;
	/* params specific to an individual device within a device family */
	const char *name;
	const char *fw_name_pre;
	/* params likely to change within a device family */
	const struct iwl_ht_params *ht_params;
	const struct iwl_eeprom_params *eeprom_params;
	const struct iwl_pwr_tx_backoff *pwr_tx_backoffs;
	const char *default_nvm_file_C_step;
	const struct iwl_tt_params *thermal_params;
	enum iwl_led_mode led_mode;
	enum iwl_nvm_type nvm_type;
	u32 max_data_size;
	u32 max_inst_size;
	netdev_features_t features;
	u32 dccm_offset;
	u32 dccm_len;
	u32 dccm2_offset;
	u32 dccm2_len;
	u32 smem_offset;
	u32 smem_len;
	u16 nvm_ver;
	u16 nvm_calib_ver;
	u32 rx_with_siso_diversity:1,
	    tx_with_siso_diversity:1,
	    bt_shared_single_ant:1,
	    internal_wimax_coex:1,
	    host_interrupt_operation_mode:1,
	    high_temp:1,
	    mac_addr_from_csr:1,
	    lp_xtal_workaround:1,
	    disable_dummy_notification:1,
	    apmg_not_supported:1,
	    vht_mu_mimo_supported:1,
	    cdb:1,
	    dbgc_supported:1,
	    uhb_supported:1;
	u8 valid_tx_ant;
	u8 valid_rx_ant;
	u8 non_shared_ant;
	u8 nvm_hw_section_num;
	u8 max_tx_agg_size;
	u8 max_ht_ampdu_exponent;
	u8 max_vht_ampdu_exponent;
	u8 ucode_api_max;
	u8 ucode_api_min;
	u16 num_rbds;
	u32 min_umac_error_event_table;
	u32 d3_debug_data_base_addr;
	u32 d3_debug_data_length;
	u32 min_txq_size;
	u32 gp2_reg_addr;
	u32 min_256_ba_txq_size;
	const struct iwl_fw_mon_regs mon_dram_regs;
	const struct iwl_fw_mon_regs mon_smem_regs;
};

#define IWL_CFG_ANY (~0)

#define IWL_CFG_MAC_TYPE_PU		0x31
#define IWL_CFG_MAC_TYPE_PNJ		0x32
#define IWL_CFG_MAC_TYPE_TH		0x32
#define IWL_CFG_MAC_TYPE_QU		0x33
#define IWL_CFG_MAC_TYPE_QUZ		0x35
#define IWL_CFG_MAC_TYPE_QNJ		0x36

#define IWL_CFG_RF_TYPE_TH		0x105
#define IWL_CFG_RF_TYPE_TH1		0x108
#define IWL_CFG_RF_TYPE_JF2		0x105
#define IWL_CFG_RF_TYPE_JF1		0x108
#define IWL_CFG_RF_TYPE_HR2		0x10A
#define IWL_CFG_RF_TYPE_HR1		0x10C

#define IWL_CFG_RF_ID_TH		0x1
#define IWL_CFG_RF_ID_TH1		0x1
#define IWL_CFG_RF_ID_JF		0x3
#define IWL_CFG_RF_ID_JF1		0x6
#define IWL_CFG_RF_ID_JF1_DIV		0xA
#define IWL_CFG_RF_ID_HR		0x7
#define IWL_CFG_RF_ID_HR1		0x4

#define IWL_CFG_NO_160			0x0
#define IWL_CFG_160			0x1

#define IWL_CFG_CORES_BT		0x0
#define IWL_CFG_CORES_BT_GNSS		0x5

#define IWL_SUBDEVICE_RF_ID(subdevice)	((u16)((subdevice) & 0x00F0) >> 4)
#define IWL_SUBDEVICE_NO_160(subdevice)	((u16)((subdevice) & 0x0100) >> 9)
#define IWL_SUBDEVICE_CORES(subdevice)	((u16)((subdevice) & 0x1C00) >> 10)

struct iwl_dev_info {
	u16 device;
	u16 subdevice;
	u16 mac_type;
	u16 rf_type;
	u8 mac_step;
	u8 rf_id;
	u8 no_160;
	u8 cores;
	const struct iwl_cfg *cfg;
	const char *name;
};

/*
 * This list declares the config structures for all devices.
 */
extern const struct iwl_cfg_trans_params iwl9000_trans_cfg;
extern const struct iwl_cfg_trans_params iwl9560_trans_cfg;
extern const struct iwl_cfg_trans_params iwl9560_shared_clk_trans_cfg;
extern const struct iwl_cfg_trans_params iwl_qnj_trans_cfg;
extern const struct iwl_cfg_trans_params iwl_qu_trans_cfg;
extern const struct iwl_cfg_trans_params iwl_qu_medium_latency_trans_cfg;
extern const struct iwl_cfg_trans_params iwl_qu_long_latency_trans_cfg;
extern const struct iwl_cfg_trans_params iwl_ax200_trans_cfg;
extern const char iwl9162_name[];
extern const char iwl9260_name[];
extern const char iwl9260_1_name[];
extern const char iwl9270_name[];
extern const char iwl9461_name[];
extern const char iwl9462_name[];
extern const char iwl9560_name[];
extern const char iwl9162_160_name[];
extern const char iwl9260_160_name[];
extern const char iwl9270_160_name[];
extern const char iwl9461_160_name[];
extern const char iwl9462_160_name[];
extern const char iwl9560_160_name[];
extern const char iwl9260_killer_1550_name[];
extern const char iwl9560_killer_1550i_name[];
extern const char iwl9560_killer_1550s_name[];
extern const char iwl_ax200_name[];
extern const char iwl_ax201_name[];
extern const char iwl_ax101_name[];
extern const char iwl_ax200_killer_1650w_name[];
extern const char iwl_ax200_killer_1650x_name[];

#if IS_ENABLED(CONFIG_IWLDVM)
extern const struct iwl_cfg iwl5300_agn_cfg;
extern const struct iwl_cfg iwl5100_agn_cfg;
extern const struct iwl_cfg iwl5350_agn_cfg;
extern const struct iwl_cfg iwl5100_bgn_cfg;
extern const struct iwl_cfg iwl5100_abg_cfg;
extern const struct iwl_cfg iwl5150_agn_cfg;
extern const struct iwl_cfg iwl5150_abg_cfg;
extern const struct iwl_cfg iwl6005_2agn_cfg;
extern const struct iwl_cfg iwl6005_2abg_cfg;
extern const struct iwl_cfg iwl6005_2bg_cfg;
extern const struct iwl_cfg iwl6005_2agn_sff_cfg;
extern const struct iwl_cfg iwl6005_2agn_d_cfg;
extern const struct iwl_cfg iwl6005_2agn_mow1_cfg;
extern const struct iwl_cfg iwl6005_2agn_mow2_cfg;
extern const struct iwl_cfg iwl1030_bgn_cfg;
extern const struct iwl_cfg iwl1030_bg_cfg;
extern const struct iwl_cfg iwl6030_2agn_cfg;
extern const struct iwl_cfg iwl6030_2abg_cfg;
extern const struct iwl_cfg iwl6030_2bgn_cfg;
extern const struct iwl_cfg iwl6030_2bg_cfg;
extern const struct iwl_cfg iwl6000i_2agn_cfg;
extern const struct iwl_cfg iwl6000i_2abg_cfg;
extern const struct iwl_cfg iwl6000i_2bg_cfg;
extern const struct iwl_cfg iwl6000_3agn_cfg;
extern const struct iwl_cfg iwl6050_2agn_cfg;
extern const struct iwl_cfg iwl6050_2abg_cfg;
extern const struct iwl_cfg iwl6150_bgn_cfg;
extern const struct iwl_cfg iwl6150_bg_cfg;
extern const struct iwl_cfg iwl1000_bgn_cfg;
extern const struct iwl_cfg iwl1000_bg_cfg;
extern const struct iwl_cfg iwl100_bgn_cfg;
extern const struct iwl_cfg iwl100_bg_cfg;
extern const struct iwl_cfg iwl130_bgn_cfg;
extern const struct iwl_cfg iwl130_bg_cfg;
extern const struct iwl_cfg iwl2000_2bgn_cfg;
extern const struct iwl_cfg iwl2000_2bgn_d_cfg;
extern const struct iwl_cfg iwl2030_2bgn_cfg;
extern const struct iwl_cfg iwl6035_2agn_cfg;
extern const struct iwl_cfg iwl6035_2agn_sff_cfg;
extern const struct iwl_cfg iwl105_bgn_cfg;
extern const struct iwl_cfg iwl105_bgn_d_cfg;
extern const struct iwl_cfg iwl135_bgn_cfg;
#endif /* CONFIG_IWLDVM */
#if IS_ENABLED(CONFIG_IWLMVM)
extern const struct iwl_cfg iwl7260_2ac_cfg;
extern const struct iwl_cfg iwl7260_2ac_cfg_high_temp;
extern const struct iwl_cfg iwl7260_2n_cfg;
extern const struct iwl_cfg iwl7260_n_cfg;
extern const struct iwl_cfg iwl3160_2ac_cfg;
extern const struct iwl_cfg iwl3160_2n_cfg;
extern const struct iwl_cfg iwl3160_n_cfg;
extern const struct iwl_cfg iwl3165_2ac_cfg;
extern const struct iwl_cfg iwl3168_2ac_cfg;
extern const struct iwl_cfg iwl7265_2ac_cfg;
extern const struct iwl_cfg iwl7265_2n_cfg;
extern const struct iwl_cfg iwl7265_n_cfg;
extern const struct iwl_cfg iwl7265d_2ac_cfg;
extern const struct iwl_cfg iwl7265d_2n_cfg;
extern const struct iwl_cfg iwl7265d_n_cfg;
extern const struct iwl_cfg iwl8260_2n_cfg;
extern const struct iwl_cfg iwl8260_2ac_cfg;
extern const struct iwl_cfg iwl8265_2ac_cfg;
extern const struct iwl_cfg iwl8275_2ac_cfg;
extern const struct iwl_cfg iwl4165_2ac_cfg;
extern const struct iwl_cfg iwl9260_2ac_cfg;
extern const struct iwl_cfg iwl9560_qu_b0_jf_b0_cfg;
extern const struct iwl_cfg iwl9560_qu_c0_jf_b0_cfg;
extern const struct iwl_cfg iwl9560_quz_a0_jf_b0_cfg;
extern const struct iwl_cfg iwl9560_qnj_b0_jf_b0_cfg;
extern const struct iwl_cfg iwl9560_2ac_cfg_soc;
extern const struct iwl_cfg iwl_qu_b0_hr1_b0;
extern const struct iwl_cfg iwl_qu_c0_hr1_b0;
extern const struct iwl_cfg iwl_quz_a0_hr1_b0;
extern const struct iwl_cfg iwl_ax200_cfg_cc;
extern const struct iwl_cfg iwl_ax201_cfg_qu_hr;
extern const struct iwl_cfg iwl_ax201_cfg_qu_hr;
extern const struct iwl_cfg iwl_ax201_cfg_qu_c0_hr_b0;
extern const struct iwl_cfg iwl_ax201_cfg_quz_hr;
extern const struct iwl_cfg iwl_ax1650i_cfg_quz_hr;
extern const struct iwl_cfg iwl_ax1650s_cfg_quz_hr;
extern const struct iwl_cfg killer1650s_2ax_cfg_qu_b0_hr_b0;
extern const struct iwl_cfg killer1650i_2ax_cfg_qu_b0_hr_b0;
extern const struct iwl_cfg killer1650s_2ax_cfg_qu_c0_hr_b0;
extern const struct iwl_cfg killer1650i_2ax_cfg_qu_c0_hr_b0;
extern const struct iwl_cfg killer1650x_2ax_cfg;
extern const struct iwl_cfg killer1650w_2ax_cfg;
extern const struct iwl_cfg iwl_qnj_b0_hr_b0_cfg;
extern const struct iwl_cfg iwlax210_2ax_cfg_so_jf_a0;
extern const struct iwl_cfg iwlax210_2ax_cfg_so_hr_a0;
extern const struct iwl_cfg iwlax211_2ax_cfg_so_gf_a0;
extern const struct iwl_cfg iwlax211_2ax_cfg_so_gf_a0_long;
extern const struct iwl_cfg iwlax210_2ax_cfg_ty_gf_a0;
extern const struct iwl_cfg iwlax411_2ax_cfg_so_gf4_a0;
extern const struct iwl_cfg iwlax411_2ax_cfg_so_gf4_a0_long;
extern const struct iwl_cfg iwlax411_2ax_cfg_sosnj_gf4_a0;
extern const struct iwl_cfg iwlax211_cfg_snj_gf_a0;
#endif /* CPTCFG_IWLMVM || CPTCFG_IWLFMAC */

#endif /* __IWL_CONFIG_H__ */