Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Viresh Kumar | 3487 | 73.01% | 40 | 71.43% |
Georgi Djakov | 565 | 11.83% | 2 | 3.57% |
Quentin Perret | 335 | 7.01% | 1 | 1.79% |
Sibi Sankar | 176 | 3.69% | 1 | 1.79% |
Saravana Kannan | 84 | 1.76% | 1 | 1.79% |
Dave Gerlach | 52 | 1.09% | 3 | 5.36% |
Anson Huang | 27 | 0.57% | 1 | 1.79% |
Walter Lozano | 22 | 0.46% | 1 | 1.79% |
Waldemar Rymarkiewicz | 11 | 0.23% | 1 | 1.79% |
Sudeep Holla | 7 | 0.15% | 1 | 1.79% |
Tobias Jordan | 5 | 0.10% | 1 | 1.79% |
Thomas Gleixner | 2 | 0.04% | 1 | 1.79% |
Dan Carpenter | 2 | 0.04% | 1 | 1.79% |
Masahiro Yamada | 1 | 0.02% | 1 | 1.79% |
Total | 4776 | 56 |
// SPDX-License-Identifier: GPL-2.0-only /* * Generic OPP OF helpers * * Copyright (C) 2009-2010 Texas Instruments Incorporated. * Nishanth Menon * Romit Dasgupta * Kevin Hilman */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/cpu.h> #include <linux/errno.h> #include <linux/device.h> #include <linux/of_device.h> #include <linux/pm_domain.h> #include <linux/slab.h> #include <linux/export.h> #include <linux/energy_model.h> #include "opp.h" /* * Returns opp descriptor node for a device node, caller must * do of_node_put(). */ static struct device_node *_opp_of_get_opp_desc_node(struct device_node *np, int index) { /* "operating-points-v2" can be an array for power domain providers */ return of_parse_phandle(np, "operating-points-v2", index); } /* Returns opp descriptor node for a device, caller must do of_node_put() */ struct device_node *dev_pm_opp_of_get_opp_desc_node(struct device *dev) { return _opp_of_get_opp_desc_node(dev->of_node, 0); } EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_opp_desc_node); struct opp_table *_managed_opp(struct device *dev, int index) { struct opp_table *opp_table, *managed_table = NULL; struct device_node *np; np = _opp_of_get_opp_desc_node(dev->of_node, index); if (!np) return NULL; list_for_each_entry(opp_table, &opp_tables, node) { if (opp_table->np == np) { /* * Multiple devices can point to the same OPP table and * so will have same node-pointer, np. * * But the OPPs will be considered as shared only if the * OPP table contains a "opp-shared" property. */ if (opp_table->shared_opp == OPP_TABLE_ACCESS_SHARED) { _get_opp_table_kref(opp_table); managed_table = opp_table; } break; } } of_node_put(np); return managed_table; } /* The caller must call dev_pm_opp_put() after the OPP is used */ static struct dev_pm_opp *_find_opp_of_np(struct opp_table *opp_table, struct device_node *opp_np) { struct dev_pm_opp *opp; mutex_lock(&opp_table->lock); list_for_each_entry(opp, &opp_table->opp_list, node) { if (opp->np == opp_np) { dev_pm_opp_get(opp); mutex_unlock(&opp_table->lock); return opp; } } mutex_unlock(&opp_table->lock); return NULL; } static struct device_node *of_parse_required_opp(struct device_node *np, int index) { struct device_node *required_np; required_np = of_parse_phandle(np, "required-opps", index); if (unlikely(!required_np)) { pr_err("%s: Unable to parse required-opps: %pOF, index: %d\n", __func__, np, index); } return required_np; } /* The caller must call dev_pm_opp_put_opp_table() after the table is used */ static struct opp_table *_find_table_of_opp_np(struct device_node *opp_np) { struct opp_table *opp_table; struct device_node *opp_table_np; lockdep_assert_held(&opp_table_lock); opp_table_np = of_get_parent(opp_np); if (!opp_table_np) goto err; /* It is safe to put the node now as all we need now is its address */ of_node_put(opp_table_np); list_for_each_entry(opp_table, &opp_tables, node) { if (opp_table_np == opp_table->np) { _get_opp_table_kref(opp_table); return opp_table; } } err: return ERR_PTR(-ENODEV); } /* Free resources previously acquired by _opp_table_alloc_required_tables() */ static void _opp_table_free_required_tables(struct opp_table *opp_table) { struct opp_table **required_opp_tables = opp_table->required_opp_tables; int i; if (!required_opp_tables) return; for (i = 0; i < opp_table->required_opp_count; i++) { if (IS_ERR_OR_NULL(required_opp_tables[i])) break; dev_pm_opp_put_opp_table(required_opp_tables[i]); } kfree(required_opp_tables); opp_table->required_opp_count = 0; opp_table->required_opp_tables = NULL; } /* * Populate all devices and opp tables which are part of "required-opps" list. * Checking only the first OPP node should be enough. */ static void _opp_table_alloc_required_tables(struct opp_table *opp_table, struct device *dev, struct device_node *opp_np) { struct opp_table **required_opp_tables; struct device_node *required_np, *np; int count, i; /* Traversing the first OPP node is all we need */ np = of_get_next_available_child(opp_np, NULL); if (!np) { dev_err(dev, "Empty OPP table\n"); return; } count = of_count_phandle_with_args(np, "required-opps", NULL); if (!count) goto put_np; required_opp_tables = kcalloc(count, sizeof(*required_opp_tables), GFP_KERNEL); if (!required_opp_tables) goto put_np; opp_table->required_opp_tables = required_opp_tables; opp_table->required_opp_count = count; for (i = 0; i < count; i++) { required_np = of_parse_required_opp(np, i); if (!required_np) goto free_required_tables; required_opp_tables[i] = _find_table_of_opp_np(required_np); of_node_put(required_np); if (IS_ERR(required_opp_tables[i])) goto free_required_tables; /* * We only support genpd's OPPs in the "required-opps" for now, * as we don't know how much about other cases. Error out if the * required OPP doesn't belong to a genpd. */ if (!required_opp_tables[i]->is_genpd) { dev_err(dev, "required-opp doesn't belong to genpd: %pOF\n", required_np); goto free_required_tables; } } goto put_np; free_required_tables: _opp_table_free_required_tables(opp_table); put_np: of_node_put(np); } void _of_init_opp_table(struct opp_table *opp_table, struct device *dev, int index) { struct device_node *np, *opp_np; u32 val; /* * Only required for backward compatibility with v1 bindings, but isn't * harmful for other cases. And so we do it unconditionally. */ np = of_node_get(dev->of_node); if (!np) return; if (!of_property_read_u32(np, "clock-latency", &val)) opp_table->clock_latency_ns_max = val; of_property_read_u32(np, "voltage-tolerance", &opp_table->voltage_tolerance_v1); if (of_find_property(np, "#power-domain-cells", NULL)) opp_table->is_genpd = true; /* Get OPP table node */ opp_np = _opp_of_get_opp_desc_node(np, index); of_node_put(np); if (!opp_np) return; if (of_property_read_bool(opp_np, "opp-shared")) opp_table->shared_opp = OPP_TABLE_ACCESS_SHARED; else opp_table->shared_opp = OPP_TABLE_ACCESS_EXCLUSIVE; opp_table->np = opp_np; _opp_table_alloc_required_tables(opp_table, dev, opp_np); of_node_put(opp_np); } void _of_clear_opp_table(struct opp_table *opp_table) { _opp_table_free_required_tables(opp_table); } /* * Release all resources previously acquired with a call to * _of_opp_alloc_required_opps(). */ void _of_opp_free_required_opps(struct opp_table *opp_table, struct dev_pm_opp *opp) { struct dev_pm_opp **required_opps = opp->required_opps; int i; if (!required_opps) return; for (i = 0; i < opp_table->required_opp_count; i++) { if (!required_opps[i]) break; /* Put the reference back */ dev_pm_opp_put(required_opps[i]); } kfree(required_opps); opp->required_opps = NULL; } /* Populate all required OPPs which are part of "required-opps" list */ static int _of_opp_alloc_required_opps(struct opp_table *opp_table, struct dev_pm_opp *opp) { struct dev_pm_opp **required_opps; struct opp_table *required_table; struct device_node *np; int i, ret, count = opp_table->required_opp_count; if (!count) return 0; required_opps = kcalloc(count, sizeof(*required_opps), GFP_KERNEL); if (!required_opps) return -ENOMEM; opp->required_opps = required_opps; for (i = 0; i < count; i++) { required_table = opp_table->required_opp_tables[i]; np = of_parse_required_opp(opp->np, i); if (unlikely(!np)) { ret = -ENODEV; goto free_required_opps; } required_opps[i] = _find_opp_of_np(required_table, np); of_node_put(np); if (!required_opps[i]) { pr_err("%s: Unable to find required OPP node: %pOF (%d)\n", __func__, opp->np, i); ret = -ENODEV; goto free_required_opps; } } return 0; free_required_opps: _of_opp_free_required_opps(opp_table, opp); return ret; } static int _bandwidth_supported(struct device *dev, struct opp_table *opp_table) { struct device_node *np, *opp_np; struct property *prop; if (!opp_table) { np = of_node_get(dev->of_node); if (!np) return -ENODEV; opp_np = _opp_of_get_opp_desc_node(np, 0); of_node_put(np); } else { opp_np = of_node_get(opp_table->np); } /* Lets not fail in case we are parsing opp-v1 bindings */ if (!opp_np) return 0; /* Checking only first OPP is sufficient */ np = of_get_next_available_child(opp_np, NULL); if (!np) { dev_err(dev, "OPP table empty\n"); return -EINVAL; } of_node_put(opp_np); prop = of_find_property(np, "opp-peak-kBps", NULL); of_node_put(np); if (!prop || !prop->length) return 0; return 1; } int dev_pm_opp_of_find_icc_paths(struct device *dev, struct opp_table *opp_table) { struct device_node *np; int ret, i, count, num_paths; struct icc_path **paths; ret = _bandwidth_supported(dev, opp_table); if (ret <= 0) return ret; ret = 0; np = of_node_get(dev->of_node); if (!np) return 0; count = of_count_phandle_with_args(np, "interconnects", "#interconnect-cells"); of_node_put(np); if (count < 0) return 0; /* two phandles when #interconnect-cells = <1> */ if (count % 2) { dev_err(dev, "%s: Invalid interconnects values\n", __func__); return -EINVAL; } num_paths = count / 2; paths = kcalloc(num_paths, sizeof(*paths), GFP_KERNEL); if (!paths) return -ENOMEM; for (i = 0; i < num_paths; i++) { paths[i] = of_icc_get_by_index(dev, i); if (IS_ERR(paths[i])) { ret = PTR_ERR(paths[i]); if (ret != -EPROBE_DEFER) { dev_err(dev, "%s: Unable to get path%d: %d\n", __func__, i, ret); } goto err; } } if (opp_table) { opp_table->paths = paths; opp_table->path_count = num_paths; return 0; } err: while (i--) icc_put(paths[i]); kfree(paths); return ret; } EXPORT_SYMBOL_GPL(dev_pm_opp_of_find_icc_paths); static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table, struct device_node *np) { unsigned int count = opp_table->supported_hw_count; u32 version; int ret; if (!opp_table->supported_hw) { /* * In the case that no supported_hw has been set by the * platform but there is an opp-supported-hw value set for * an OPP then the OPP should not be enabled as there is * no way to see if the hardware supports it. */ if (of_find_property(np, "opp-supported-hw", NULL)) return false; else return true; } while (count--) { ret = of_property_read_u32_index(np, "opp-supported-hw", count, &version); if (ret) { dev_warn(dev, "%s: failed to read opp-supported-hw property at index %d: %d\n", __func__, count, ret); return false; } /* Both of these are bitwise masks of the versions */ if (!(version & opp_table->supported_hw[count])) return false; } return true; } static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev, struct opp_table *opp_table) { u32 *microvolt, *microamp = NULL; int supplies = opp_table->regulator_count, vcount, icount, ret, i, j; struct property *prop = NULL; char name[NAME_MAX]; /* Search for "opp-microvolt-<name>" */ if (opp_table->prop_name) { snprintf(name, sizeof(name), "opp-microvolt-%s", opp_table->prop_name); prop = of_find_property(opp->np, name, NULL); } if (!prop) { /* Search for "opp-microvolt" */ sprintf(name, "opp-microvolt"); prop = of_find_property(opp->np, name, NULL); /* Missing property isn't a problem, but an invalid entry is */ if (!prop) { if (unlikely(supplies == -1)) { /* Initialize regulator_count */ opp_table->regulator_count = 0; return 0; } if (!supplies) return 0; dev_err(dev, "%s: opp-microvolt missing although OPP managing regulators\n", __func__); return -EINVAL; } } if (unlikely(supplies == -1)) { /* Initialize regulator_count */ supplies = opp_table->regulator_count = 1; } else if (unlikely(!supplies)) { dev_err(dev, "%s: opp-microvolt wasn't expected\n", __func__); return -EINVAL; } vcount = of_property_count_u32_elems(opp->np, name); if (vcount < 0) { dev_err(dev, "%s: Invalid %s property (%d)\n", __func__, name, vcount); return vcount; } /* There can be one or three elements per supply */ if (vcount != supplies && vcount != supplies * 3) { dev_err(dev, "%s: Invalid number of elements in %s property (%d) with supplies (%d)\n", __func__, name, vcount, supplies); return -EINVAL; } microvolt = kmalloc_array(vcount, sizeof(*microvolt), GFP_KERNEL); if (!microvolt) return -ENOMEM; ret = of_property_read_u32_array(opp->np, name, microvolt, vcount); if (ret) { dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret); ret = -EINVAL; goto free_microvolt; } /* Search for "opp-microamp-<name>" */ prop = NULL; if (opp_table->prop_name) { snprintf(name, sizeof(name), "opp-microamp-%s", opp_table->prop_name); prop = of_find_property(opp->np, name, NULL); } if (!prop) { /* Search for "opp-microamp" */ sprintf(name, "opp-microamp"); prop = of_find_property(opp->np, name, NULL); } if (prop) { icount = of_property_count_u32_elems(opp->np, name); if (icount < 0) { dev_err(dev, "%s: Invalid %s property (%d)\n", __func__, name, icount); ret = icount; goto free_microvolt; } if (icount != supplies) { dev_err(dev, "%s: Invalid number of elements in %s property (%d) with supplies (%d)\n", __func__, name, icount, supplies); ret = -EINVAL; goto free_microvolt; } microamp = kmalloc_array(icount, sizeof(*microamp), GFP_KERNEL); if (!microamp) { ret = -EINVAL; goto free_microvolt; } ret = of_property_read_u32_array(opp->np, name, microamp, icount); if (ret) { dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret); ret = -EINVAL; goto free_microamp; } } for (i = 0, j = 0; i < supplies; i++) { opp->supplies[i].u_volt = microvolt[j++]; if (vcount == supplies) { opp->supplies[i].u_volt_min = opp->supplies[i].u_volt; opp->supplies[i].u_volt_max = opp->supplies[i].u_volt; } else { opp->supplies[i].u_volt_min = microvolt[j++]; opp->supplies[i].u_volt_max = microvolt[j++]; } if (microamp) opp->supplies[i].u_amp = microamp[i]; } free_microamp: kfree(microamp); free_microvolt: kfree(microvolt); return ret; } /** * dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT * entries * @dev: device pointer used to lookup OPP table. * * Free OPPs created using static entries present in DT. */ void dev_pm_opp_of_remove_table(struct device *dev) { _dev_pm_opp_find_and_remove_table(dev); } EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table); static int _read_bw(struct dev_pm_opp *new_opp, struct opp_table *table, struct device_node *np, bool peak) { const char *name = peak ? "opp-peak-kBps" : "opp-avg-kBps"; struct property *prop; int i, count, ret; u32 *bw; prop = of_find_property(np, name, NULL); if (!prop) return -ENODEV; count = prop->length / sizeof(u32); if (table->path_count != count) { pr_err("%s: Mismatch between %s and paths (%d %d)\n", __func__, name, count, table->path_count); return -EINVAL; } bw = kmalloc_array(count, sizeof(*bw), GFP_KERNEL); if (!bw) return -ENOMEM; ret = of_property_read_u32_array(np, name, bw, count); if (ret) { pr_err("%s: Error parsing %s: %d\n", __func__, name, ret); goto out; } for (i = 0; i < count; i++) { if (peak) new_opp->bandwidth[i].peak = kBps_to_icc(bw[i]); else new_opp->bandwidth[i].avg = kBps_to_icc(bw[i]); } out: kfree(bw); return ret; } static int _read_opp_key(struct dev_pm_opp *new_opp, struct opp_table *table, struct device_node *np, bool *rate_not_available) { bool found = false; u64 rate; int ret; ret = of_property_read_u64(np, "opp-hz", &rate); if (!ret) { /* * Rate is defined as an unsigned long in clk API, and so * casting explicitly to its type. Must be fixed once rate is 64 * bit guaranteed in clk API. */ new_opp->rate = (unsigned long)rate; found = true; } *rate_not_available = !!ret; /* * Bandwidth consists of peak and average (optional) values: * opp-peak-kBps = <path1_value path2_value>; * opp-avg-kBps = <path1_value path2_value>; */ ret = _read_bw(new_opp, table, np, true); if (!ret) { found = true; ret = _read_bw(new_opp, table, np, false); } /* The properties were found but we failed to parse them */ if (ret && ret != -ENODEV) return ret; if (!of_property_read_u32(np, "opp-level", &new_opp->level)) found = true; if (found) return 0; return ret; } /** * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings) * @opp_table: OPP table * @dev: device for which we do this operation * @np: device node * * This function adds an opp definition to the opp table and returns status. The * opp can be controlled using dev_pm_opp_enable/disable functions and may be * removed by dev_pm_opp_remove. * * Return: * Valid OPP pointer: * On success * NULL: * Duplicate OPPs (both freq and volt are same) and opp->available * OR if the OPP is not supported by hardware. * ERR_PTR(-EEXIST): * Freq are same and volt are different OR * Duplicate OPPs (both freq and volt are same) and !opp->available * ERR_PTR(-ENOMEM): * Memory allocation failure * ERR_PTR(-EINVAL): * Failed parsing the OPP node */ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table, struct device *dev, struct device_node *np) { struct dev_pm_opp *new_opp; u64 rate = 0; u32 val; int ret; bool rate_not_available = false; new_opp = _opp_allocate(opp_table); if (!new_opp) return ERR_PTR(-ENOMEM); ret = _read_opp_key(new_opp, opp_table, np, &rate_not_available); if (ret < 0 && !opp_table->is_genpd) { dev_err(dev, "%s: opp key field not found\n", __func__); goto free_opp; } /* Check if the OPP supports hardware's hierarchy of versions or not */ if (!_opp_is_supported(dev, opp_table, np)) { dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate); goto free_opp; } new_opp->turbo = of_property_read_bool(np, "turbo-mode"); new_opp->np = np; new_opp->dynamic = false; new_opp->available = true; ret = _of_opp_alloc_required_opps(opp_table, new_opp); if (ret) goto free_opp; if (!of_property_read_u32(np, "clock-latency-ns", &val)) new_opp->clock_latency_ns = val; ret = opp_parse_supplies(new_opp, dev, opp_table); if (ret) goto free_required_opps; if (opp_table->is_genpd) new_opp->pstate = pm_genpd_opp_to_performance_state(dev, new_opp); ret = _opp_add(dev, new_opp, opp_table, rate_not_available); if (ret) { /* Don't return error for duplicate OPPs */ if (ret == -EBUSY) ret = 0; goto free_required_opps; } /* OPP to select on device suspend */ if (of_property_read_bool(np, "opp-suspend")) { if (opp_table->suspend_opp) { /* Pick the OPP with higher rate as suspend OPP */ if (new_opp->rate > opp_table->suspend_opp->rate) { opp_table->suspend_opp->suspend = false; new_opp->suspend = true; opp_table->suspend_opp = new_opp; } } else { new_opp->suspend = true; opp_table->suspend_opp = new_opp; } } if (new_opp->clock_latency_ns > opp_table->clock_latency_ns_max) opp_table->clock_latency_ns_max = new_opp->clock_latency_ns; pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n", __func__, new_opp->turbo, new_opp->rate, new_opp->supplies[0].u_volt, new_opp->supplies[0].u_volt_min, new_opp->supplies[0].u_volt_max, new_opp->clock_latency_ns); /* * Notify the changes in the availability of the operable * frequency/voltage list. */ blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADD, new_opp); return new_opp; free_required_opps: _of_opp_free_required_opps(opp_table, new_opp); free_opp: _opp_free(new_opp); return ERR_PTR(ret); } /* Initializes OPP tables based on new bindings */ static int _of_add_opp_table_v2(struct device *dev, struct opp_table *opp_table) { struct device_node *np; int ret, count = 0, pstate_count = 0; struct dev_pm_opp *opp; /* OPP table is already initialized for the device */ mutex_lock(&opp_table->lock); if (opp_table->parsed_static_opps) { opp_table->parsed_static_opps++; mutex_unlock(&opp_table->lock); return 0; } opp_table->parsed_static_opps = 1; mutex_unlock(&opp_table->lock); /* We have opp-table node now, iterate over it and add OPPs */ for_each_available_child_of_node(opp_table->np, np) { opp = _opp_add_static_v2(opp_table, dev, np); if (IS_ERR(opp)) { ret = PTR_ERR(opp); dev_err(dev, "%s: Failed to add OPP, %d\n", __func__, ret); of_node_put(np); goto remove_static_opp; } else if (opp) { count++; } } /* There should be one of more OPP defined */ if (WARN_ON(!count)) { ret = -ENOENT; goto remove_static_opp; } list_for_each_entry(opp, &opp_table->opp_list, node) pstate_count += !!opp->pstate; /* Either all or none of the nodes shall have performance state set */ if (pstate_count && pstate_count != count) { dev_err(dev, "Not all nodes have performance state set (%d: %d)\n", count, pstate_count); ret = -ENOENT; goto remove_static_opp; } if (pstate_count) opp_table->genpd_performance_state = true; return 0; remove_static_opp: _opp_remove_all_static(opp_table); return ret; } /* Initializes OPP tables based on old-deprecated bindings */ static int _of_add_opp_table_v1(struct device *dev, struct opp_table *opp_table) { const struct property *prop; const __be32 *val; int nr, ret = 0; prop = of_find_property(dev->of_node, "operating-points", NULL); if (!prop) return -ENODEV; if (!prop->value) return -ENODATA; /* * Each OPP is a set of tuples consisting of frequency and * voltage like <freq-kHz vol-uV>. */ nr = prop->length / sizeof(u32); if (nr % 2) { dev_err(dev, "%s: Invalid OPP table\n", __func__); return -EINVAL; } mutex_lock(&opp_table->lock); opp_table->parsed_static_opps = 1; mutex_unlock(&opp_table->lock); val = prop->value; while (nr) { unsigned long freq = be32_to_cpup(val++) * 1000; unsigned long volt = be32_to_cpup(val++); ret = _opp_add_v1(opp_table, dev, freq, volt, false); if (ret) { dev_err(dev, "%s: Failed to add OPP %ld (%d)\n", __func__, freq, ret); _opp_remove_all_static(opp_table); return ret; } nr -= 2; } return ret; } /** * dev_pm_opp_of_add_table() - Initialize opp table from device tree * @dev: device pointer used to lookup OPP table. * * Register the initial OPP table with the OPP library for given device. * * Return: * 0 On success OR * Duplicate OPPs (both freq and volt are same) and opp->available * -EEXIST Freq are same and volt are different OR * Duplicate OPPs (both freq and volt are same) and !opp->available * -ENOMEM Memory allocation failure * -ENODEV when 'operating-points' property is not found or is invalid data * in device node. * -ENODATA when empty 'operating-points' property is found * -EINVAL when invalid entries are found in opp-v2 table */ int dev_pm_opp_of_add_table(struct device *dev) { struct opp_table *opp_table; int ret; opp_table = dev_pm_opp_get_opp_table_indexed(dev, 0); if (!opp_table) return -ENOMEM; /* * OPPs have two version of bindings now. Also try the old (v1) * bindings for backward compatibility with older dtbs. */ if (opp_table->np) ret = _of_add_opp_table_v2(dev, opp_table); else ret = _of_add_opp_table_v1(dev, opp_table); if (ret) dev_pm_opp_put_opp_table(opp_table); return ret; } EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table); /** * dev_pm_opp_of_add_table_indexed() - Initialize indexed opp table from device tree * @dev: device pointer used to lookup OPP table. * @index: Index number. * * Register the initial OPP table with the OPP library for given device only * using the "operating-points-v2" property. * * Return: * 0 On success OR * Duplicate OPPs (both freq and volt are same) and opp->available * -EEXIST Freq are same and volt are different OR * Duplicate OPPs (both freq and volt are same) and !opp->available * -ENOMEM Memory allocation failure * -ENODEV when 'operating-points' property is not found or is invalid data * in device node. * -ENODATA when empty 'operating-points' property is found * -EINVAL when invalid entries are found in opp-v2 table */ int dev_pm_opp_of_add_table_indexed(struct device *dev, int index) { struct opp_table *opp_table; int ret, count; if (index) { /* * If only one phandle is present, then the same OPP table * applies for all index requests. */ count = of_count_phandle_with_args(dev->of_node, "operating-points-v2", NULL); if (count == 1) index = 0; } opp_table = dev_pm_opp_get_opp_table_indexed(dev, index); if (!opp_table) return -ENOMEM; ret = _of_add_opp_table_v2(dev, opp_table); if (ret) dev_pm_opp_put_opp_table(opp_table); return ret; } EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table_indexed); /* CPU device specific helpers */ /** * dev_pm_opp_of_cpumask_remove_table() - Removes OPP table for @cpumask * @cpumask: cpumask for which OPP table needs to be removed * * This removes the OPP tables for CPUs present in the @cpumask. * This should be used only to remove static entries created from DT. */ void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask) { _dev_pm_opp_cpumask_remove_table(cpumask, -1); } EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_remove_table); /** * dev_pm_opp_of_cpumask_add_table() - Adds OPP table for @cpumask * @cpumask: cpumask for which OPP table needs to be added. * * This adds the OPP tables for CPUs present in the @cpumask. */ int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask) { struct device *cpu_dev; int cpu, ret; if (WARN_ON(cpumask_empty(cpumask))) return -ENODEV; for_each_cpu(cpu, cpumask) { cpu_dev = get_cpu_device(cpu); if (!cpu_dev) { pr_err("%s: failed to get cpu%d device\n", __func__, cpu); ret = -ENODEV; goto remove_table; } ret = dev_pm_opp_of_add_table(cpu_dev); if (ret) { /* * OPP may get registered dynamically, don't print error * message here. */ pr_debug("%s: couldn't find opp table for cpu:%d, %d\n", __func__, cpu, ret); goto remove_table; } } return 0; remove_table: /* Free all other OPPs */ _dev_pm_opp_cpumask_remove_table(cpumask, cpu); return ret; } EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table); /* * Works only for OPP v2 bindings. * * Returns -ENOENT if operating-points-v2 bindings aren't supported. */ /** * dev_pm_opp_of_get_sharing_cpus() - Get cpumask of CPUs sharing OPPs with * @cpu_dev using operating-points-v2 * bindings. * * @cpu_dev: CPU device for which we do this operation * @cpumask: cpumask to update with information of sharing CPUs * * This updates the @cpumask with CPUs that are sharing OPPs with @cpu_dev. * * Returns -ENOENT if operating-points-v2 isn't present for @cpu_dev. */ int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask) { struct device_node *np, *tmp_np, *cpu_np; int cpu, ret = 0; /* Get OPP descriptor node */ np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); if (!np) { dev_dbg(cpu_dev, "%s: Couldn't find opp node.\n", __func__); return -ENOENT; } cpumask_set_cpu(cpu_dev->id, cpumask); /* OPPs are shared ? */ if (!of_property_read_bool(np, "opp-shared")) goto put_cpu_node; for_each_possible_cpu(cpu) { if (cpu == cpu_dev->id) continue; cpu_np = of_cpu_device_node_get(cpu); if (!cpu_np) { dev_err(cpu_dev, "%s: failed to get cpu%d node\n", __func__, cpu); ret = -ENOENT; goto put_cpu_node; } /* Get OPP descriptor node */ tmp_np = _opp_of_get_opp_desc_node(cpu_np, 0); of_node_put(cpu_np); if (!tmp_np) { pr_err("%pOF: Couldn't find opp node\n", cpu_np); ret = -ENOENT; goto put_cpu_node; } /* CPUs are sharing opp node */ if (np == tmp_np) cpumask_set_cpu(cpu, cpumask); of_node_put(tmp_np); } put_cpu_node: of_node_put(np); return ret; } EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus); /** * of_get_required_opp_performance_state() - Search for required OPP and return its performance state. * @np: Node that contains the "required-opps" property. * @index: Index of the phandle to parse. * * Returns the performance state of the OPP pointed out by the "required-opps" * property at @index in @np. * * Return: Zero or positive performance state on success, otherwise negative * value on errors. */ int of_get_required_opp_performance_state(struct device_node *np, int index) { struct dev_pm_opp *opp; struct device_node *required_np; struct opp_table *opp_table; int pstate = -EINVAL; required_np = of_parse_required_opp(np, index); if (!required_np) return -EINVAL; opp_table = _find_table_of_opp_np(required_np); if (IS_ERR(opp_table)) { pr_err("%s: Failed to find required OPP table %pOF: %ld\n", __func__, np, PTR_ERR(opp_table)); goto put_required_np; } opp = _find_opp_of_np(opp_table, required_np); if (opp) { pstate = opp->pstate; dev_pm_opp_put(opp); } dev_pm_opp_put_opp_table(opp_table); put_required_np: of_node_put(required_np); return pstate; } EXPORT_SYMBOL_GPL(of_get_required_opp_performance_state); /** * dev_pm_opp_get_of_node() - Gets the DT node corresponding to an opp * @opp: opp for which DT node has to be returned for * * Return: DT node corresponding to the opp, else 0 on success. * * The caller needs to put the node with of_node_put() after using it. */ struct device_node *dev_pm_opp_get_of_node(struct dev_pm_opp *opp) { if (IS_ERR_OR_NULL(opp)) { pr_err("%s: Invalid parameters\n", __func__); return NULL; } return of_node_get(opp->np); } EXPORT_SYMBOL_GPL(dev_pm_opp_get_of_node); /* * Callback function provided to the Energy Model framework upon registration. * This computes the power estimated by @CPU at @kHz if it is the frequency * of an existing OPP, or at the frequency of the first OPP above @kHz otherwise * (see dev_pm_opp_find_freq_ceil()). This function updates @kHz to the ceiled * frequency and @mW to the associated power. The power is estimated as * P = C * V^2 * f with C being the CPU's capacitance and V and f respectively * the voltage and frequency of the OPP. * * Returns -ENODEV if the CPU device cannot be found, -EINVAL if the power * calculation failed because of missing parameters, 0 otherwise. */ static int __maybe_unused _get_cpu_power(unsigned long *mW, unsigned long *kHz, int cpu) { struct device *cpu_dev; struct dev_pm_opp *opp; struct device_node *np; unsigned long mV, Hz; u32 cap; u64 tmp; int ret; cpu_dev = get_cpu_device(cpu); if (!cpu_dev) return -ENODEV; np = of_node_get(cpu_dev->of_node); if (!np) return -EINVAL; ret = of_property_read_u32(np, "dynamic-power-coefficient", &cap); of_node_put(np); if (ret) return -EINVAL; Hz = *kHz * 1000; opp = dev_pm_opp_find_freq_ceil(cpu_dev, &Hz); if (IS_ERR(opp)) return -EINVAL; mV = dev_pm_opp_get_voltage(opp) / 1000; dev_pm_opp_put(opp); if (!mV) return -EINVAL; tmp = (u64)cap * mV * mV * (Hz / 1000000); do_div(tmp, 1000000000); *mW = (unsigned long)tmp; *kHz = Hz / 1000; return 0; } /** * dev_pm_opp_of_register_em() - Attempt to register an Energy Model * @cpus : CPUs for which an Energy Model has to be registered * * This checks whether the "dynamic-power-coefficient" devicetree property has * been specified, and tries to register an Energy Model with it if it has. */ void dev_pm_opp_of_register_em(struct cpumask *cpus) { struct em_data_callback em_cb = EM_DATA_CB(_get_cpu_power); int ret, nr_opp, cpu = cpumask_first(cpus); struct device *cpu_dev; struct device_node *np; u32 cap; cpu_dev = get_cpu_device(cpu); if (!cpu_dev) return; nr_opp = dev_pm_opp_get_opp_count(cpu_dev); if (nr_opp <= 0) return; np = of_node_get(cpu_dev->of_node); if (!np) return; /* * Register an EM only if the 'dynamic-power-coefficient' property is * set in devicetree. It is assumed the voltage values are known if that * property is set since it is useless otherwise. If voltages are not * known, just let the EM registration fail with an error to alert the * user about the inconsistent configuration. */ ret = of_property_read_u32(np, "dynamic-power-coefficient", &cap); of_node_put(np); if (ret || !cap) return; em_register_perf_domain(cpus, nr_opp, &em_cb); } EXPORT_SYMBOL_GPL(dev_pm_opp_of_register_em);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1