| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Martin Blumenstingl | 1338 | 98.31% | 8 | 80.00% |
| Wei Yongjun | 21 | 1.54% | 1 | 10.00% |
| Thomas Gleixner | 2 | 0.15% | 1 | 10.00% |
| Total | 1361 | 10 |
// SPDX-License-Identifier: GPL-2.0-only /* * Meson8, Meson8b and GXBB USB2 PHY driver * * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com> */ #include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/property.h> #include <linux/regmap.h> #include <linux/reset.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/usb/of.h> #define REG_CONFIG 0x00 #define REG_CONFIG_CLK_EN BIT(0) #define REG_CONFIG_CLK_SEL_MASK GENMASK(3, 1) #define REG_CONFIG_CLK_DIV_MASK GENMASK(10, 4) #define REG_CONFIG_CLK_32k_ALTSEL BIT(15) #define REG_CONFIG_TEST_TRIG BIT(31) #define REG_CTRL 0x04 #define REG_CTRL_SOFT_PRST BIT(0) #define REG_CTRL_SOFT_HRESET BIT(1) #define REG_CTRL_SS_SCALEDOWN_MODE_MASK GENMASK(3, 2) #define REG_CTRL_CLK_DET_RST BIT(4) #define REG_CTRL_INTR_SEL BIT(5) #define REG_CTRL_CLK_DETECTED BIT(8) #define REG_CTRL_SOF_SENT_RCVD_TGL BIT(9) #define REG_CTRL_SOF_TOGGLE_OUT BIT(10) #define REG_CTRL_POWER_ON_RESET BIT(15) #define REG_CTRL_SLEEPM BIT(16) #define REG_CTRL_TX_BITSTUFF_ENN_H BIT(17) #define REG_CTRL_TX_BITSTUFF_ENN BIT(18) #define REG_CTRL_COMMON_ON BIT(19) #define REG_CTRL_REF_CLK_SEL_MASK GENMASK(21, 20) #define REG_CTRL_REF_CLK_SEL_SHIFT 20 #define REG_CTRL_FSEL_MASK GENMASK(24, 22) #define REG_CTRL_FSEL_SHIFT 22 #define REG_CTRL_PORT_RESET BIT(25) #define REG_CTRL_THREAD_ID_MASK GENMASK(31, 26) #define REG_ENDP_INTR 0x08 /* bits [31:26], [24:21] and [15:3] seem to be read-only */ #define REG_ADP_BC 0x0c #define REG_ADP_BC_VBUS_VLD_EXT_SEL BIT(0) #define REG_ADP_BC_VBUS_VLD_EXT BIT(1) #define REG_ADP_BC_OTG_DISABLE BIT(2) #define REG_ADP_BC_ID_PULLUP BIT(3) #define REG_ADP_BC_DRV_VBUS BIT(4) #define REG_ADP_BC_ADP_PRB_EN BIT(5) #define REG_ADP_BC_ADP_DISCHARGE BIT(6) #define REG_ADP_BC_ADP_CHARGE BIT(7) #define REG_ADP_BC_SESS_END BIT(8) #define REG_ADP_BC_DEVICE_SESS_VLD BIT(9) #define REG_ADP_BC_B_VALID BIT(10) #define REG_ADP_BC_A_VALID BIT(11) #define REG_ADP_BC_ID_DIG BIT(12) #define REG_ADP_BC_VBUS_VALID BIT(13) #define REG_ADP_BC_ADP_PROBE BIT(14) #define REG_ADP_BC_ADP_SENSE BIT(15) #define REG_ADP_BC_ACA_ENABLE BIT(16) #define REG_ADP_BC_DCD_ENABLE BIT(17) #define REG_ADP_BC_VDAT_DET_EN_B BIT(18) #define REG_ADP_BC_VDAT_SRC_EN_B BIT(19) #define REG_ADP_BC_CHARGE_SEL BIT(20) #define REG_ADP_BC_CHARGE_DETECT BIT(21) #define REG_ADP_BC_ACA_PIN_RANGE_C BIT(22) #define REG_ADP_BC_ACA_PIN_RANGE_B BIT(23) #define REG_ADP_BC_ACA_PIN_RANGE_A BIT(24) #define REG_ADP_BC_ACA_PIN_GND BIT(25) #define REG_ADP_BC_ACA_PIN_FLOAT BIT(26) #define REG_DBG_UART 0x10 #define REG_DBG_UART_BYPASS_SEL BIT(0) #define REG_DBG_UART_BYPASS_DM_EN BIT(1) #define REG_DBG_UART_BYPASS_DP_EN BIT(2) #define REG_DBG_UART_BYPASS_DM_DATA BIT(3) #define REG_DBG_UART_BYPASS_DP_DATA BIT(4) #define REG_DBG_UART_FSV_MINUS BIT(5) #define REG_DBG_UART_FSV_PLUS BIT(6) #define REG_DBG_UART_FSV_BURN_IN_TEST BIT(7) #define REG_DBG_UART_LOOPBACK_EN_B BIT(8) #define REG_DBG_UART_SET_IDDQ BIT(9) #define REG_DBG_UART_ATE_RESET BIT(10) #define REG_TEST 0x14 #define REG_TEST_DATA_IN_MASK GENMASK(3, 0) #define REG_TEST_EN_MASK GENMASK(7, 4) #define REG_TEST_ADDR_MASK GENMASK(11, 8) #define REG_TEST_DATA_OUT_SEL BIT(12) #define REG_TEST_CLK BIT(13) #define REG_TEST_VA_TEST_EN_B_MASK GENMASK(15, 14) #define REG_TEST_DATA_OUT_MASK GENMASK(19, 16) #define REG_TEST_DISABLE_ID_PULLUP BIT(20) #define REG_TUNE 0x18 #define REG_TUNE_TX_RES_TUNE_MASK GENMASK(1, 0) #define REG_TUNE_TX_HSXV_TUNE_MASK GENMASK(3, 2) #define REG_TUNE_TX_VREF_TUNE_MASK GENMASK(7, 4) #define REG_TUNE_TX_RISE_TUNE_MASK GENMASK(9, 8) #define REG_TUNE_TX_PREEMP_PULSE_TUNE BIT(10) #define REG_TUNE_TX_PREEMP_AMP_TUNE_MASK GENMASK(12, 11) #define REG_TUNE_TX_FSLS_TUNE_MASK GENMASK(16, 13) #define REG_TUNE_SQRX_TUNE_MASK GENMASK(19, 17) #define REG_TUNE_OTG_TUNE GENMASK(22, 20) #define REG_TUNE_COMP_DIS_TUNE GENMASK(25, 23) #define REG_TUNE_HOST_DM_PULLDOWN BIT(26) #define REG_TUNE_HOST_DP_PULLDOWN BIT(27) #define RESET_COMPLETE_TIME 500 #define ACA_ENABLE_COMPLETE_TIME 50 struct phy_meson8b_usb2_match_data { bool host_enable_aca; }; struct phy_meson8b_usb2_priv { struct regmap *regmap; enum usb_dr_mode dr_mode; struct clk *clk_usb_general; struct clk *clk_usb; struct reset_control *reset; const struct phy_meson8b_usb2_match_data *match; }; static const struct regmap_config phy_meson8b_usb2_regmap_conf = { .reg_bits = 8, .val_bits = 32, .reg_stride = 4, .max_register = REG_TUNE, }; static int phy_meson8b_usb2_power_on(struct phy *phy) { struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy); u32 reg; int ret; if (!IS_ERR_OR_NULL(priv->reset)) { ret = reset_control_reset(priv->reset); if (ret) { dev_err(&phy->dev, "Failed to trigger USB reset\n"); return ret; } } ret = clk_prepare_enable(priv->clk_usb_general); if (ret) { dev_err(&phy->dev, "Failed to enable USB general clock\n"); return ret; } ret = clk_prepare_enable(priv->clk_usb); if (ret) { dev_err(&phy->dev, "Failed to enable USB DDR clock\n"); clk_disable_unprepare(priv->clk_usb_general); return ret; } regmap_update_bits(priv->regmap, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL, REG_CONFIG_CLK_32k_ALTSEL); regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_REF_CLK_SEL_MASK, 0x2 << REG_CTRL_REF_CLK_SEL_SHIFT); regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_FSEL_MASK, 0x5 << REG_CTRL_FSEL_SHIFT); /* reset the PHY */ regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET, REG_CTRL_POWER_ON_RESET); udelay(RESET_COMPLETE_TIME); regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET, 0); udelay(RESET_COMPLETE_TIME); regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT, REG_CTRL_SOF_TOGGLE_OUT); if (priv->dr_mode == USB_DR_MODE_HOST) { regmap_update_bits(priv->regmap, REG_DBG_UART, REG_DBG_UART_SET_IDDQ, 0); if (priv->match->host_enable_aca) { regmap_update_bits(priv->regmap, REG_ADP_BC, REG_ADP_BC_ACA_ENABLE, REG_ADP_BC_ACA_ENABLE); udelay(ACA_ENABLE_COMPLETE_TIME); regmap_read(priv->regmap, REG_ADP_BC, ®); if (reg & REG_ADP_BC_ACA_PIN_FLOAT) { dev_warn(&phy->dev, "USB ID detect failed!\n"); clk_disable_unprepare(priv->clk_usb); clk_disable_unprepare(priv->clk_usb_general); return -EINVAL; } } } return 0; } static int phy_meson8b_usb2_power_off(struct phy *phy) { struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy); if (priv->dr_mode == USB_DR_MODE_HOST) regmap_update_bits(priv->regmap, REG_DBG_UART, REG_DBG_UART_SET_IDDQ, REG_DBG_UART_SET_IDDQ); clk_disable_unprepare(priv->clk_usb); clk_disable_unprepare(priv->clk_usb_general); return 0; } static const struct phy_ops phy_meson8b_usb2_ops = { .power_on = phy_meson8b_usb2_power_on, .power_off = phy_meson8b_usb2_power_off, .owner = THIS_MODULE, }; static int phy_meson8b_usb2_probe(struct platform_device *pdev) { struct phy_meson8b_usb2_priv *priv; struct phy *phy; struct phy_provider *phy_provider; void __iomem *base; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); priv->match = device_get_match_data(&pdev->dev); if (!priv->match) return -ENODEV; priv->regmap = devm_regmap_init_mmio(&pdev->dev, base, &phy_meson8b_usb2_regmap_conf); if (IS_ERR(priv->regmap)) return PTR_ERR(priv->regmap); priv->clk_usb_general = devm_clk_get(&pdev->dev, "usb_general"); if (IS_ERR(priv->clk_usb_general)) return PTR_ERR(priv->clk_usb_general); priv->clk_usb = devm_clk_get(&pdev->dev, "usb"); if (IS_ERR(priv->clk_usb)) return PTR_ERR(priv->clk_usb); priv->reset = devm_reset_control_get_optional_shared(&pdev->dev, NULL); if (PTR_ERR(priv->reset) == -EPROBE_DEFER) return PTR_ERR(priv->reset); priv->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1); if (priv->dr_mode == USB_DR_MODE_UNKNOWN) { dev_err(&pdev->dev, "missing dual role configuration of the controller\n"); return -EINVAL; } phy = devm_phy_create(&pdev->dev, NULL, &phy_meson8b_usb2_ops); if (IS_ERR(phy)) { dev_err(&pdev->dev, "failed to create PHY\n"); return PTR_ERR(phy); } phy_set_drvdata(phy, priv); phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); return PTR_ERR_OR_ZERO(phy_provider); } static const struct phy_meson8b_usb2_match_data phy_meson8_usb2_match_data = { .host_enable_aca = false, }; static const struct phy_meson8b_usb2_match_data phy_meson8b_usb2_match_data = { .host_enable_aca = true, }; static const struct of_device_id phy_meson8b_usb2_of_match[] = { { .compatible = "amlogic,meson8-usb2-phy", .data = &phy_meson8_usb2_match_data }, { .compatible = "amlogic,meson8b-usb2-phy", .data = &phy_meson8b_usb2_match_data }, { .compatible = "amlogic,meson8m2-usb2-phy", .data = &phy_meson8b_usb2_match_data }, { .compatible = "amlogic,meson-gxbb-usb2-phy", .data = &phy_meson8b_usb2_match_data }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, phy_meson8b_usb2_of_match); static struct platform_driver phy_meson8b_usb2_driver = { .probe = phy_meson8b_usb2_probe, .driver = { .name = "phy-meson-usb2", .of_match_table = phy_meson8b_usb2_of_match, }, }; module_platform_driver(phy_meson8b_usb2_driver); MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); MODULE_DESCRIPTION("Meson8, Meson8b, Meson8m2 and GXBB USB2 PHY driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1