| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Joachim Eastwood | 10167 | 99.57% | 6 | 37.50% |
| Masahiro Yamada | 9 | 0.09% | 1 | 6.25% |
| Paul Gortmaker | 7 | 0.07% | 1 | 6.25% |
| Gustavo A. R. Silva | 6 | 0.06% | 1 | 6.25% |
| Mika Westerberg | 5 | 0.05% | 1 | 6.25% |
| Colin Ian King | 4 | 0.04% | 1 | 6.25% |
| Laxman Dewangan | 4 | 0.04% | 1 | 6.25% |
| Nathan Chancellor | 4 | 0.04% | 1 | 6.25% |
| Yue haibing | 2 | 0.02% | 1 | 6.25% |
| Kees Cook | 2 | 0.02% | 1 | 6.25% |
| Irina Tirdea | 1 | 0.01% | 1 | 6.25% |
| Total | 10211 | 16 |
/* * Pinctrl driver for NXP LPC18xx/LPC43xx System Control Unit (SCU) * * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ #include <linux/bitops.h> #include <linux/clk.h> #include <linux/io.h> #include <linux/init.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> #include <linux/pinctrl/pinconf-generic.h> #include "core.h" #include "pinctrl-utils.h" /* LPC18XX SCU analog function registers */ #define LPC18XX_SCU_REG_ENAIO0 0xc88 #define LPC18XX_SCU_REG_ENAIO1 0xc8c #define LPC18XX_SCU_REG_ENAIO2 0xc90 #define LPC18XX_SCU_REG_ENAIO2_DAC BIT(0) /* LPC18XX SCU pin register definitions */ #define LPC18XX_SCU_PIN_MODE_MASK 0x7 #define LPC18XX_SCU_PIN_EPD BIT(3) #define LPC18XX_SCU_PIN_EPUN BIT(4) #define LPC18XX_SCU_PIN_EHS BIT(5) #define LPC18XX_SCU_PIN_EZI BIT(6) #define LPC18XX_SCU_PIN_ZIF BIT(7) #define LPC18XX_SCU_PIN_EHD_MASK 0x300 #define LPC18XX_SCU_PIN_EHD_POS 8 #define LPC18XX_SCU_USB1_EPD BIT(2) #define LPC18XX_SCU_USB1_EPWR BIT(4) #define LPC18XX_SCU_I2C0_EFP BIT(0) #define LPC18XX_SCU_I2C0_EHD BIT(2) #define LPC18XX_SCU_I2C0_EZI BIT(3) #define LPC18XX_SCU_I2C0_ZIF BIT(7) #define LPC18XX_SCU_I2C0_SCL_SHIFT 0 #define LPC18XX_SCU_I2C0_SDA_SHIFT 8 #define LPC18XX_SCU_FUNC_PER_PIN 8 /* LPC18XX SCU pin interrupt select registers */ #define LPC18XX_SCU_PINTSEL0 0xe00 #define LPC18XX_SCU_PINTSEL1 0xe04 #define LPC18XX_SCU_PINTSEL_VAL_MASK 0xff #define LPC18XX_SCU_PINTSEL_PORT_SHIFT 5 #define LPC18XX_SCU_IRQ_PER_PINTSEL 4 #define LPC18XX_GPIO_PINS_PER_PORT 32 #define LPC18XX_GPIO_PIN_INT_MAX 8 #define LPC18XX_SCU_PINTSEL_VAL(val, n) \ ((val) << (((n) % LPC18XX_SCU_IRQ_PER_PINTSEL) * 8)) /* LPC18xx pin types */ enum { TYPE_ND, /* Normal-drive */ TYPE_HD, /* High-drive */ TYPE_HS, /* High-speed */ TYPE_I2C0, TYPE_USB1, }; /* LPC18xx pin functions */ enum { FUNC_R, /* Reserved */ FUNC_ADC, FUNC_ADCTRIG, FUNC_CAN0, FUNC_CAN1, FUNC_CGU_OUT, FUNC_CLKIN, FUNC_CLKOUT, FUNC_CTIN, FUNC_CTOUT, FUNC_DAC, FUNC_EMC, FUNC_EMC_ALT, FUNC_ENET, FUNC_ENET_ALT, FUNC_GPIO, FUNC_I2C0, FUNC_I2C1, FUNC_I2S0_RX_MCLK, FUNC_I2S0_RX_SCK, FUNC_I2S0_RX_SDA, FUNC_I2S0_RX_WS, FUNC_I2S0_TX_MCLK, FUNC_I2S0_TX_SCK, FUNC_I2S0_TX_SDA, FUNC_I2S0_TX_WS, FUNC_I2S1, FUNC_LCD, FUNC_LCD_ALT, FUNC_MCTRL, FUNC_NMI, FUNC_QEI, FUNC_SDMMC, FUNC_SGPIO, FUNC_SPI, FUNC_SPIFI, FUNC_SSP0, FUNC_SSP0_ALT, FUNC_SSP1, FUNC_TIMER0, FUNC_TIMER1, FUNC_TIMER2, FUNC_TIMER3, FUNC_TRACE, FUNC_UART0, FUNC_UART1, FUNC_UART2, FUNC_UART3, FUNC_USB0, FUNC_USB1, FUNC_MAX }; static const char *const lpc18xx_function_names[] = { [FUNC_R] = "reserved", [FUNC_ADC] = "adc", [FUNC_ADCTRIG] = "adctrig", [FUNC_CAN0] = "can0", [FUNC_CAN1] = "can1", [FUNC_CGU_OUT] = "cgu_out", [FUNC_CLKIN] = "clkin", [FUNC_CLKOUT] = "clkout", [FUNC_CTIN] = "ctin", [FUNC_CTOUT] = "ctout", [FUNC_DAC] = "dac", [FUNC_EMC] = "emc", [FUNC_EMC_ALT] = "emc_alt", [FUNC_ENET] = "enet", [FUNC_ENET_ALT] = "enet_alt", [FUNC_GPIO] = "gpio", [FUNC_I2C0] = "i2c0", [FUNC_I2C1] = "i2c1", [FUNC_I2S0_RX_MCLK] = "i2s0_rx_mclk", [FUNC_I2S0_RX_SCK] = "i2s0_rx_sck", [FUNC_I2S0_RX_SDA] = "i2s0_rx_sda", [FUNC_I2S0_RX_WS] = "i2s0_rx_ws", [FUNC_I2S0_TX_MCLK] = "i2s0_tx_mclk", [FUNC_I2S0_TX_SCK] = "i2s0_tx_sck", [FUNC_I2S0_TX_SDA] = "i2s0_tx_sda", [FUNC_I2S0_TX_WS] = "i2s0_tx_ws", [FUNC_I2S1] = "i2s1", [FUNC_LCD] = "lcd", [FUNC_LCD_ALT] = "lcd_alt", [FUNC_MCTRL] = "mctrl", [FUNC_NMI] = "nmi", [FUNC_QEI] = "qei", [FUNC_SDMMC] = "sdmmc", [FUNC_SGPIO] = "sgpio", [FUNC_SPI] = "spi", [FUNC_SPIFI] = "spifi", [FUNC_SSP0] = "ssp0", [FUNC_SSP0_ALT] = "ssp0_alt", [FUNC_SSP1] = "ssp1", [FUNC_TIMER0] = "timer0", [FUNC_TIMER1] = "timer1", [FUNC_TIMER2] = "timer2", [FUNC_TIMER3] = "timer3", [FUNC_TRACE] = "trace", [FUNC_UART0] = "uart0", [FUNC_UART1] = "uart1", [FUNC_UART2] = "uart2", [FUNC_UART3] = "uart3", [FUNC_USB0] = "usb0", [FUNC_USB1] = "usb1", }; struct lpc18xx_pmx_func { const char **groups; unsigned ngroups; }; struct lpc18xx_scu_data { struct pinctrl_dev *pctl; void __iomem *base; struct clk *clk; struct lpc18xx_pmx_func func[FUNC_MAX]; }; struct lpc18xx_pin_caps { unsigned int offset; unsigned char functions[LPC18XX_SCU_FUNC_PER_PIN]; unsigned char analog; unsigned char type; }; /* Analog pins are required to have both bias and input disabled */ #define LPC18XX_SCU_ANALOG_PIN_CFG 0x10 /* Macros to maniupluate analog member in lpc18xx_pin_caps */ #define LPC18XX_ANALOG_PIN BIT(7) #define LPC18XX_ANALOG_ADC(a) ((a >> 5) & 0x3) #define LPC18XX_ANALOG_BIT_MASK 0x1f #define ADC0 (LPC18XX_ANALOG_PIN | (0x00 << 5)) #define ADC1 (LPC18XX_ANALOG_PIN | (0x01 << 5)) #define DAC LPC18XX_ANALOG_PIN #define LPC_P(port, pin, f0, f1, f2, f3, f4, f5, f6, f7, a, t) \ static struct lpc18xx_pin_caps lpc18xx_pin_p##port##_##pin = { \ .offset = 0x##port * 32 * 4 + pin * 4, \ .functions = { \ FUNC_##f0, FUNC_##f1, FUNC_##f2, \ FUNC_##f3, FUNC_##f4, FUNC_##f5, \ FUNC_##f6, FUNC_##f7, \ }, \ .analog = a, \ .type = TYPE_##t, \ } #define LPC_N(pname, off, f0, f1, f2, f3, f4, f5, f6, f7, a, t) \ static struct lpc18xx_pin_caps lpc18xx_pin_##pname = { \ .offset = off, \ .functions = { \ FUNC_##f0, FUNC_##f1, FUNC_##f2, \ FUNC_##f3, FUNC_##f4, FUNC_##f5, \ FUNC_##f6, FUNC_##f7, \ }, \ .analog = a, \ .type = TYPE_##t, \ } /* Pinmuxing table taken from data sheet */ /* Pin FUNC0 FUNC1 FUNC2 FUNC3 FUNC4 FUNC5 FUNC6 FUNC7 ANALOG TYPE */ LPC_P(0,0, GPIO, SSP1, ENET, SGPIO, R, R, I2S0_TX_WS,I2S1, 0, ND); LPC_P(0,1, GPIO, SSP1,ENET_ALT,SGPIO, R, R, ENET, I2S1, 0, ND); LPC_P(1,0, GPIO, CTIN, EMC, R, R, SSP0, SGPIO, R, 0, ND); LPC_P(1,1, GPIO, CTOUT, EMC, SGPIO, R, SSP0, R, R, 0, ND); LPC_P(1,2, GPIO, CTOUT, EMC, SGPIO, R, SSP0, R, R, 0, ND); LPC_P(1,3, GPIO, CTOUT, SGPIO, EMC, USB0, SSP1, R, SDMMC, 0, ND); LPC_P(1,4, GPIO, CTOUT, SGPIO, EMC, USB0, SSP1, R, SDMMC, 0, ND); LPC_P(1,5, GPIO, CTOUT, R, EMC, USB0, SSP1, SGPIO, SDMMC, 0, ND); LPC_P(1,6, GPIO, CTIN, R, EMC, R, R, SGPIO, SDMMC, 0, ND); LPC_P(1,7, GPIO, UART1, CTOUT, EMC, USB0, R, R, R, 0, ND); LPC_P(1,8, GPIO, UART1, CTOUT, EMC, R, R, R, SDMMC, 0, ND); LPC_P(1,9, GPIO, UART1, CTOUT, EMC, R, R, R, SDMMC, 0, ND); LPC_P(1,10, GPIO, UART1, CTOUT, EMC, R, R, R, SDMMC, 0, ND); LPC_P(1,11, GPIO, UART1, CTOUT, EMC, R, R, R, SDMMC, 0, ND); LPC_P(1,12, GPIO, UART1, R, EMC, TIMER0, R, SGPIO, SDMMC, 0, ND); LPC_P(1,13, GPIO, UART1, R, EMC, TIMER0, R, SGPIO, SDMMC, 0, ND); LPC_P(1,14, GPIO, UART1, R, EMC, TIMER0, R, SGPIO, R, 0, ND); LPC_P(1,15, GPIO, UART2, SGPIO, ENET, TIMER0, R, R, R, 0, ND); LPC_P(1,16, GPIO, UART2, SGPIO,ENET_ALT,TIMER0, R, R, ENET, 0, ND); LPC_P(1,17, GPIO, UART2, R, ENET, TIMER0, CAN1, SGPIO, R, 0, HD); LPC_P(1,18, GPIO, UART2, R, ENET, TIMER0, CAN1, SGPIO, R, 0, ND); LPC_P(1,19, ENET, SSP1, R, R, CLKOUT, R, I2S0_RX_MCLK,I2S1, 0, ND); LPC_P(1,20, GPIO, SSP1, R, ENET, TIMER0, R, SGPIO, R, 0, ND); LPC_P(2,0, SGPIO, UART0, EMC, USB0, GPIO, R, TIMER3, ENET, 0, ND); LPC_P(2,1, SGPIO, UART0, EMC, USB0, GPIO, R, TIMER3, R, 0, ND); LPC_P(2,2, SGPIO, UART0, EMC, USB0, GPIO, CTIN, TIMER3, R, 0, ND); LPC_P(2,3, SGPIO, I2C1, UART3, CTIN, GPIO, R, TIMER3, USB0, 0, HD); LPC_P(2,4, SGPIO, I2C1, UART3, CTIN, GPIO, R, TIMER3, USB0, 0, HD); LPC_P(2,5, SGPIO, CTIN, USB1, ADCTRIG, GPIO, R, TIMER3, USB0, 0, HD); LPC_P(2,6, SGPIO, UART0, EMC, USB0, GPIO, CTIN, TIMER3, R, 0, ND); LPC_P(2,7, GPIO, CTOUT, UART3, EMC, R, R, TIMER3, R, 0, ND); LPC_P(2,8, SGPIO, CTOUT, UART3, EMC, GPIO, R, R, R, 0, ND); LPC_P(2,9, GPIO, CTOUT, UART3, EMC, R, R, R, R, 0, ND); LPC_P(2,10, GPIO, CTOUT, UART2, EMC, R, R, R, R, 0, ND); LPC_P(2,11, GPIO, CTOUT, UART2, EMC, R, R, R, R, 0, ND); LPC_P(2,12, GPIO, CTOUT, R, EMC, R, R, R, UART2, 0, ND); LPC_P(2,13, GPIO, CTIN, R, EMC, R, R, R, UART2, 0, ND); LPC_P(3,0, I2S0_RX_SCK, I2S0_RX_MCLK, I2S0_TX_SCK, I2S0_TX_MCLK,SSP0,R,R,R, 0, ND); LPC_P(3,1, I2S0_TX_WS, I2S0_RX_WS,CAN0,USB1,GPIO, R, LCD, R, 0, ND); LPC_P(3,2, I2S0_TX_SDA, I2S0_RX_SDA,CAN0,USB1,GPIO, R, LCD, R, 0, ND); LPC_P(3,3, R, SPI, SSP0, SPIFI, CGU_OUT,R, I2S0_TX_MCLK, I2S1, 0, HS); LPC_P(3,4, GPIO, R, R, SPIFI, UART1, I2S0_TX_WS, I2S1, LCD, 0, ND); LPC_P(3,5, GPIO, R, R, SPIFI, UART1, I2S0_TX_SDA,I2S1, LCD, 0, ND); LPC_P(3,6, GPIO, SPI, SSP0, SPIFI, R, SSP0_ALT, R, R, 0, ND); LPC_P(3,7, R, SPI, SSP0, SPIFI, GPIO, SSP0_ALT, R, R, 0, ND); LPC_P(3,8, R, SPI, SSP0, SPIFI, GPIO, SSP0_ALT, R, R, 0, ND); LPC_P(4,0, GPIO, MCTRL, NMI, R, R, LCD, UART3, R, 0, ND); LPC_P(4,1, GPIO, CTOUT, LCD, R, R, LCD_ALT, UART3, ENET, ADC0|1, ND); LPC_P(4,2, GPIO, CTOUT, LCD, R, R, LCD_ALT, UART3, SGPIO, 0, ND); LPC_P(4,3, GPIO, CTOUT, LCD, R, R, LCD_ALT, UART3, SGPIO, ADC0|0, ND); LPC_P(4,4, GPIO, CTOUT, LCD, R, R, LCD_ALT, UART3, SGPIO, DAC, ND); LPC_P(4,5, GPIO, CTOUT, LCD, R, R, R, R, SGPIO, 0, ND); LPC_P(4,6, GPIO, CTOUT, LCD, R, R, R, R, SGPIO, 0, ND); LPC_P(4,7, LCD, CLKIN, R, R, R, R, I2S1,I2S0_TX_SCK, 0, ND); LPC_P(4,8, R, CTIN, LCD, R, GPIO, LCD_ALT, CAN1, SGPIO, 0, ND); LPC_P(4,9, R, CTIN, LCD, R, GPIO, LCD_ALT, CAN1, SGPIO, 0, ND); LPC_P(4,10, R, CTIN, LCD, R, GPIO, LCD_ALT, R, SGPIO, 0, ND); LPC_P(5,0, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND); LPC_P(5,1, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND); LPC_P(5,2, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND); LPC_P(5,3, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND); LPC_P(5,4, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND); LPC_P(5,5, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND); LPC_P(5,6, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND); LPC_P(5,7, GPIO, MCTRL, EMC, R, UART1, TIMER1, R, R, 0, ND); LPC_P(6,0, R, I2S0_RX_MCLK,R, R, I2S0_RX_SCK, R, R, R, 0, ND); LPC_P(6,1, GPIO, EMC, UART0, I2S0_RX_WS, R, TIMER2, R, R, 0, ND); LPC_P(6,2, GPIO, EMC, UART0, I2S0_RX_SDA, R, TIMER2, R, R, 0, ND); LPC_P(6,3, GPIO, USB0, SGPIO, EMC, R, TIMER2, R, R, 0, ND); LPC_P(6,4, GPIO, CTIN, UART0, EMC, R, R, R, R, 0, ND); LPC_P(6,5, GPIO, CTOUT, UART0, EMC, R, R, R, R, 0, ND); LPC_P(6,6, GPIO, EMC, SGPIO, USB0, R, TIMER2, R, R, 0, ND); LPC_P(6,7, R, EMC, SGPIO, USB0, GPIO, TIMER2, R, R, 0, ND); LPC_P(6,8, R, EMC, SGPIO, USB0, GPIO, TIMER2, R, R, 0, ND); LPC_P(6,9, GPIO, R, R, EMC, R, TIMER2, R, R, 0, ND); LPC_P(6,10, GPIO, MCTRL, R, EMC, R, R, R, R, 0, ND); LPC_P(6,11, GPIO, R, R, EMC, R, TIMER2, R, R, 0, ND); LPC_P(6,12, GPIO, CTOUT, R, EMC, R, R, R, R, 0, ND); LPC_P(7,0, GPIO, CTOUT, R, LCD, R, R, R, SGPIO, 0, ND); LPC_P(7,1, GPIO, CTOUT,I2S0_TX_WS,LCD,LCD_ALT, R, UART2, SGPIO, 0, ND); LPC_P(7,2, GPIO, CTIN,I2S0_TX_SDA,LCD,LCD_ALT, R, UART2, SGPIO, 0, ND); LPC_P(7,3, GPIO, CTIN, R, LCD,LCD_ALT, R, R, R, 0, ND); LPC_P(7,4, GPIO, CTOUT, R, LCD,LCD_ALT, TRACE, R, R, ADC0|4, ND); LPC_P(7,5, GPIO, CTOUT, R, LCD,LCD_ALT, TRACE, R, R, ADC0|3, ND); LPC_P(7,6, GPIO, CTOUT, R, LCD, R, TRACE, R, R, 0, ND); LPC_P(7,7, GPIO, CTOUT, R, LCD, R, TRACE, ENET, SGPIO, ADC1|6, ND); LPC_P(8,0, GPIO, USB0, R, MCTRL, SGPIO, R, R, TIMER0, 0, HD); LPC_P(8,1, GPIO, USB0, R, MCTRL, SGPIO, R, R, TIMER0, 0, HD); LPC_P(8,2, GPIO, USB0, R, MCTRL, SGPIO, R, R, TIMER0, 0, HD); LPC_P(8,3, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND); LPC_P(8,4, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND); LPC_P(8,5, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND); LPC_P(8,6, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND); LPC_P(8,7, GPIO, USB1, R, LCD, LCD_ALT, R, R, TIMER0, 0, ND); LPC_P(8,8, R, USB1, R, R, R, R,CGU_OUT, I2S1, 0, ND); LPC_P(9,0, GPIO, MCTRL, R, R, R, ENET, SGPIO, SSP0, 0, ND); LPC_P(9,1, GPIO, MCTRL, R, R, I2S0_TX_WS,ENET, SGPIO, SSP0, 0, ND); LPC_P(9,2, GPIO, MCTRL, R, R, I2S0_TX_SDA,ENET,SGPIO, SSP0, 0, ND); LPC_P(9,3, GPIO, MCTRL, USB1, R, R, ENET, SGPIO, UART3, 0, ND); LPC_P(9,4, R, MCTRL, USB1, R, GPIO, ENET, SGPIO, UART3, 0, ND); LPC_P(9,5, R, MCTRL, USB1, R, GPIO, ENET, SGPIO, UART0, 0, ND); LPC_P(9,6, GPIO, MCTRL, USB1, R, R, ENET, SGPIO, UART0, 0, ND); LPC_P(a,0, R, R, R, R, R, I2S1, CGU_OUT, R, 0, ND); LPC_P(a,1, GPIO, QEI, R, UART2, R, R, R, R, 0, HD); LPC_P(a,2, GPIO, QEI, R, UART2, R, R, R, R, 0, HD); LPC_P(a,3, GPIO, QEI, R, R, R, R, R, R, 0, HD); LPC_P(a,4, R, CTOUT, R, EMC, GPIO, R, R, R, 0, ND); LPC_P(b,0, R, CTOUT, LCD, R, GPIO, R, R, R, 0, ND); LPC_P(b,1, R, USB1, LCD, R, GPIO, CTOUT, R, R, 0, ND); LPC_P(b,2, R, USB1, LCD, R, GPIO, CTOUT, R, R, 0, ND); LPC_P(b,3, R, USB1, LCD, R, GPIO, CTOUT, R, R, 0, ND); LPC_P(b,4, R, USB1, LCD, R, GPIO, CTIN, R, R, 0, ND); LPC_P(b,5, R, USB1, LCD, R, GPIO, CTIN, LCD_ALT, R, 0, ND); LPC_P(b,6, R, USB1, LCD, R, GPIO, CTIN, LCD_ALT, R, ADC0|6, ND); LPC_P(c,0, R, USB1, R, ENET, LCD, R, R, SDMMC, ADC1|1, ND); LPC_P(c,1, USB1, R, UART1, ENET, GPIO, R, TIMER3, SDMMC, 0, ND); LPC_P(c,2, USB1, R, UART1, ENET, GPIO, R, R, SDMMC, 0, ND); LPC_P(c,3, USB1, R, UART1, ENET, GPIO, R, R, SDMMC, ADC1|0, ND); LPC_P(c,4, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND); LPC_P(c,5, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND); LPC_P(c,6, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND); LPC_P(c,7, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND); LPC_P(c,8, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND); LPC_P(c,9, R, USB1, R, ENET, GPIO, R, TIMER3, SDMMC, 0, ND); LPC_P(c,10, R, USB1, UART1, R, GPIO, R, TIMER3, SDMMC, 0, ND); LPC_P(c,11, R, USB1, UART1, R, GPIO, R, R, SDMMC, 0, ND); LPC_P(c,12, R, R, UART1, R, GPIO, SGPIO, I2S0_TX_SDA,SDMMC, 0, ND); LPC_P(c,13, R, R, UART1, R, GPIO, SGPIO, I2S0_TX_WS, SDMMC, 0, ND); LPC_P(c,14, R, R, UART1, R, GPIO, SGPIO, ENET, SDMMC, 0, ND); LPC_P(d,0, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND); LPC_P(d,1, R, R, EMC, R, GPIO, SDMMC, R, SGPIO, 0, ND); LPC_P(d,2, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND); LPC_P(d,3, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND); LPC_P(d,4, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND); LPC_P(d,5, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND); LPC_P(d,6, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND); LPC_P(d,7, R, CTIN, EMC, R, GPIO, R, R, SGPIO, 0, ND); LPC_P(d,8, R, CTIN, EMC, R, GPIO, R, R, SGPIO, 0, ND); LPC_P(d,9, R, CTOUT, EMC, R, GPIO, R, R, SGPIO, 0, ND); LPC_P(d,10, R, CTIN, EMC, R, GPIO, R, R, R, 0, ND); LPC_P(d,11, R, R, EMC, R, GPIO, USB1, CTOUT, R, 0, ND); LPC_P(d,12, R, R, EMC, R, GPIO, R, CTOUT, R, 0, ND); LPC_P(d,13, R, CTIN, EMC, R, GPIO, R, CTOUT, R, 0, ND); LPC_P(d,14, R, R, EMC, R, GPIO, R, CTOUT, R, 0, ND); LPC_P(d,15, R, R, EMC, R, GPIO, SDMMC, CTOUT, R, 0, ND); LPC_P(d,16, R, R, EMC, R, GPIO, SDMMC, CTOUT, R, 0, ND); LPC_P(e,0, R, R, R, EMC, GPIO, CAN1, R, R, 0, ND); LPC_P(e,1, R, R, R, EMC, GPIO, CAN1, R, R, 0, ND); LPC_P(e,2,ADCTRIG, CAN0, R, EMC, GPIO, R, R, R, 0, ND); LPC_P(e,3, R, CAN0,ADCTRIG, EMC, GPIO, R, R, R, 0, ND); LPC_P(e,4, R, NMI, R, EMC, GPIO, R, R, R, 0, ND); LPC_P(e,5, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND); LPC_P(e,6, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND); LPC_P(e,7, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND); LPC_P(e,8, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND); LPC_P(e,9, R, CTIN, UART1, EMC, GPIO, R, R, R, 0, ND); LPC_P(e,10, R, CTIN, UART1, EMC, GPIO, R, R, R, 0, ND); LPC_P(e,11, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND); LPC_P(e,12, R, CTOUT, UART1, EMC, GPIO, R, R, R, 0, ND); LPC_P(e,13, R, CTOUT, I2C1, EMC, GPIO, R, R, R, 0, ND); LPC_P(e,14, R, R, R, EMC, GPIO, R, R, R, 0, ND); LPC_P(e,15, R, CTOUT, I2C1, EMC, GPIO, R, R, R, 0, ND); LPC_P(f,0, SSP0, CLKIN, R, R, R, R, R, I2S1, 0, ND); LPC_P(f,1, R, R, SSP0, R, GPIO, R, SGPIO, R, 0, ND); LPC_P(f,2, R, UART3, SSP0, R, GPIO, R, SGPIO, R, 0, ND); LPC_P(f,3, R, UART3, SSP0, R, GPIO, R, SGPIO, R, 0, ND); LPC_P(f,4, SSP1, CLKIN, TRACE, R, R, R, I2S0_TX_MCLK,I2S0_RX_SCK, 0, ND); LPC_P(f,5, R, UART3, SSP1, TRACE, GPIO, R, SGPIO, R, ADC1|4, ND); LPC_P(f,6, R, UART3, SSP1, TRACE, GPIO, R, SGPIO, I2S1, ADC1|3, ND); LPC_P(f,7, R, UART3, SSP1, TRACE, GPIO, R, SGPIO, I2S1, ADC1|7, ND); LPC_P(f,8, R, UART0, CTIN, TRACE, GPIO, R, SGPIO, R, ADC0|2, ND); LPC_P(f,9, R, UART0, CTOUT, R, GPIO, R, SGPIO, R, ADC1|2, ND); LPC_P(f,10, R, UART0, R, R, GPIO, R, SDMMC, R, ADC0|5, ND); LPC_P(f,11, R, UART0, R, R, GPIO, R, SDMMC, R, ADC1|5, ND); /* Pin Offset FUNC0 FUNC1 FUNC2 FUNC3 FUNC4 FUNC5 FUNC6 FUNC7 ANALOG TYPE */ LPC_N(clk0, 0xc00, EMC, CLKOUT, R, R, SDMMC, EMC_ALT, SSP1, ENET, 0, HS); LPC_N(clk1, 0xc04, EMC, CLKOUT, R, R, R, CGU_OUT, R, I2S1, 0, HS); LPC_N(clk2, 0xc08, EMC, CLKOUT, R, R, SDMMC, EMC_ALT,I2S0_TX_MCLK,I2S1, 0, HS); LPC_N(clk3, 0xc0c, EMC, CLKOUT, R, R, R, CGU_OUT, R, I2S1, 0, HS); LPC_N(usb1_dm, 0xc80, R, R, R, R, R, R, R, R, 0, USB1); LPC_N(usb1_dp, 0xc80, R, R, R, R, R, R, R, R, 0, USB1); LPC_N(i2c0_scl, 0xc84, R, R, R, R, R, R, R, R, 0, I2C0); LPC_N(i2c0_sda, 0xc84, R, R, R, R, R, R, R, R, 0, I2C0); #define LPC18XX_PIN_P(port, pin) { \ .number = 0x##port * 32 + pin, \ .name = "p"#port"_"#pin, \ .drv_data = &lpc18xx_pin_p##port##_##pin \ } /* Pin numbers for special pins */ enum { PIN_CLK0 = 600, PIN_CLK1, PIN_CLK2, PIN_CLK3, PIN_USB1_DM, PIN_USB1_DP, PIN_I2C0_SCL, PIN_I2C0_SDA, }; #define LPC18XX_PIN(pname, n) { \ .number = n, \ .name = #pname, \ .drv_data = &lpc18xx_pin_##pname \ } static const struct pinctrl_pin_desc lpc18xx_pins[] = { LPC18XX_PIN_P(0,0), LPC18XX_PIN_P(0,1), LPC18XX_PIN_P(1,0), LPC18XX_PIN_P(1,1), LPC18XX_PIN_P(1,2), LPC18XX_PIN_P(1,3), LPC18XX_PIN_P(1,4), LPC18XX_PIN_P(1,5), LPC18XX_PIN_P(1,6), LPC18XX_PIN_P(1,7), LPC18XX_PIN_P(1,8), LPC18XX_PIN_P(1,9), LPC18XX_PIN_P(1,10), LPC18XX_PIN_P(1,11), LPC18XX_PIN_P(1,12), LPC18XX_PIN_P(1,13), LPC18XX_PIN_P(1,14), LPC18XX_PIN_P(1,15), LPC18XX_PIN_P(1,16), LPC18XX_PIN_P(1,17), LPC18XX_PIN_P(1,18), LPC18XX_PIN_P(1,19), LPC18XX_PIN_P(1,20), LPC18XX_PIN_P(2,0), LPC18XX_PIN_P(2,1), LPC18XX_PIN_P(2,2), LPC18XX_PIN_P(2,3), LPC18XX_PIN_P(2,4), LPC18XX_PIN_P(2,5), LPC18XX_PIN_P(2,6), LPC18XX_PIN_P(2,7), LPC18XX_PIN_P(2,8), LPC18XX_PIN_P(2,9), LPC18XX_PIN_P(2,10), LPC18XX_PIN_P(2,11), LPC18XX_PIN_P(2,12), LPC18XX_PIN_P(2,13), LPC18XX_PIN_P(3,0), LPC18XX_PIN_P(3,1), LPC18XX_PIN_P(3,2), LPC18XX_PIN_P(3,3), LPC18XX_PIN_P(3,4), LPC18XX_PIN_P(3,5), LPC18XX_PIN_P(3,6), LPC18XX_PIN_P(3,7), LPC18XX_PIN_P(3,8), LPC18XX_PIN_P(4,0), LPC18XX_PIN_P(4,1), LPC18XX_PIN_P(4,2), LPC18XX_PIN_P(4,3), LPC18XX_PIN_P(4,4), LPC18XX_PIN_P(4,5), LPC18XX_PIN_P(4,6), LPC18XX_PIN_P(4,7), LPC18XX_PIN_P(4,8), LPC18XX_PIN_P(4,9), LPC18XX_PIN_P(4,10), LPC18XX_PIN_P(5,0), LPC18XX_PIN_P(5,1), LPC18XX_PIN_P(5,2), LPC18XX_PIN_P(5,3), LPC18XX_PIN_P(5,4), LPC18XX_PIN_P(5,5), LPC18XX_PIN_P(5,6), LPC18XX_PIN_P(5,7), LPC18XX_PIN_P(6,0), LPC18XX_PIN_P(6,1), LPC18XX_PIN_P(6,2), LPC18XX_PIN_P(6,3), LPC18XX_PIN_P(6,4), LPC18XX_PIN_P(6,5), LPC18XX_PIN_P(6,6), LPC18XX_PIN_P(6,7), LPC18XX_PIN_P(6,8), LPC18XX_PIN_P(6,9), LPC18XX_PIN_P(6,10), LPC18XX_PIN_P(6,11), LPC18XX_PIN_P(6,12), LPC18XX_PIN_P(7,0), LPC18XX_PIN_P(7,1), LPC18XX_PIN_P(7,2), LPC18XX_PIN_P(7,3), LPC18XX_PIN_P(7,4), LPC18XX_PIN_P(7,5), LPC18XX_PIN_P(7,6), LPC18XX_PIN_P(7,7), LPC18XX_PIN_P(8,0), LPC18XX_PIN_P(8,1), LPC18XX_PIN_P(8,2), LPC18XX_PIN_P(8,3), LPC18XX_PIN_P(8,4), LPC18XX_PIN_P(8,5), LPC18XX_PIN_P(8,6), LPC18XX_PIN_P(8,7), LPC18XX_PIN_P(8,8), LPC18XX_PIN_P(9,0), LPC18XX_PIN_P(9,1), LPC18XX_PIN_P(9,2), LPC18XX_PIN_P(9,3), LPC18XX_PIN_P(9,4), LPC18XX_PIN_P(9,5), LPC18XX_PIN_P(9,6), LPC18XX_PIN_P(a,0), LPC18XX_PIN_P(a,1), LPC18XX_PIN_P(a,2), LPC18XX_PIN_P(a,3), LPC18XX_PIN_P(a,4), LPC18XX_PIN_P(b,0), LPC18XX_PIN_P(b,1), LPC18XX_PIN_P(b,2), LPC18XX_PIN_P(b,3), LPC18XX_PIN_P(b,4), LPC18XX_PIN_P(b,5), LPC18XX_PIN_P(b,6), LPC18XX_PIN_P(c,0), LPC18XX_PIN_P(c,1), LPC18XX_PIN_P(c,2), LPC18XX_PIN_P(c,3), LPC18XX_PIN_P(c,4), LPC18XX_PIN_P(c,5), LPC18XX_PIN_P(c,6), LPC18XX_PIN_P(c,7), LPC18XX_PIN_P(c,8), LPC18XX_PIN_P(c,9), LPC18XX_PIN_P(c,10), LPC18XX_PIN_P(c,11), LPC18XX_PIN_P(c,12), LPC18XX_PIN_P(c,13), LPC18XX_PIN_P(c,14), LPC18XX_PIN_P(d,0), LPC18XX_PIN_P(d,1), LPC18XX_PIN_P(d,2), LPC18XX_PIN_P(d,3), LPC18XX_PIN_P(d,4), LPC18XX_PIN_P(d,5), LPC18XX_PIN_P(d,6), LPC18XX_PIN_P(d,7), LPC18XX_PIN_P(d,8), LPC18XX_PIN_P(d,9), LPC18XX_PIN_P(d,10), LPC18XX_PIN_P(d,11), LPC18XX_PIN_P(d,12), LPC18XX_PIN_P(d,13), LPC18XX_PIN_P(d,14), LPC18XX_PIN_P(d,15), LPC18XX_PIN_P(d,16), LPC18XX_PIN_P(e,0), LPC18XX_PIN_P(e,1), LPC18XX_PIN_P(e,2), LPC18XX_PIN_P(e,3), LPC18XX_PIN_P(e,4), LPC18XX_PIN_P(e,5), LPC18XX_PIN_P(e,6), LPC18XX_PIN_P(e,7), LPC18XX_PIN_P(e,8), LPC18XX_PIN_P(e,9), LPC18XX_PIN_P(e,10), LPC18XX_PIN_P(e,11), LPC18XX_PIN_P(e,12), LPC18XX_PIN_P(e,13), LPC18XX_PIN_P(e,14), LPC18XX_PIN_P(e,15), LPC18XX_PIN_P(f,0), LPC18XX_PIN_P(f,1), LPC18XX_PIN_P(f,2), LPC18XX_PIN_P(f,3), LPC18XX_PIN_P(f,4), LPC18XX_PIN_P(f,5), LPC18XX_PIN_P(f,6), LPC18XX_PIN_P(f,7), LPC18XX_PIN_P(f,8), LPC18XX_PIN_P(f,9), LPC18XX_PIN_P(f,10), LPC18XX_PIN_P(f,11), LPC18XX_PIN(clk0, PIN_CLK0), LPC18XX_PIN(clk1, PIN_CLK1), LPC18XX_PIN(clk2, PIN_CLK2), LPC18XX_PIN(clk3, PIN_CLK3), LPC18XX_PIN(usb1_dm, PIN_USB1_DM), LPC18XX_PIN(usb1_dp, PIN_USB1_DP), LPC18XX_PIN(i2c0_scl, PIN_I2C0_SCL), LPC18XX_PIN(i2c0_sda, PIN_I2C0_SDA), }; /* PIN_CONFIG_GPIO_PIN_INT: route gpio to the gpio pin interrupt controller */ #define PIN_CONFIG_GPIO_PIN_INT (PIN_CONFIG_END + 1) static const struct pinconf_generic_params lpc18xx_params[] = { {"nxp,gpio-pin-interrupt", PIN_CONFIG_GPIO_PIN_INT, 0}, }; #ifdef CONFIG_DEBUG_FS static const struct pin_config_item lpc18xx_conf_items[ARRAY_SIZE(lpc18xx_params)] = { PCONFDUMP(PIN_CONFIG_GPIO_PIN_INT, "gpio pin int", NULL, true), }; #endif static int lpc18xx_pconf_get_usb1(enum pin_config_param param, int *arg, u32 reg) { switch (param) { case PIN_CONFIG_LOW_POWER_MODE: if (reg & LPC18XX_SCU_USB1_EPWR) *arg = 0; else *arg = 1; break; case PIN_CONFIG_BIAS_DISABLE: if (reg & LPC18XX_SCU_USB1_EPD) return -EINVAL; break; case PIN_CONFIG_BIAS_PULL_DOWN: if (reg & LPC18XX_SCU_USB1_EPD) *arg = 1; else return -EINVAL; break; default: return -ENOTSUPP; } return 0; } static int lpc18xx_pconf_get_i2c0(enum pin_config_param param, int *arg, u32 reg, unsigned pin) { u8 shift; if (pin == PIN_I2C0_SCL) shift = LPC18XX_SCU_I2C0_SCL_SHIFT; else shift = LPC18XX_SCU_I2C0_SDA_SHIFT; switch (param) { case PIN_CONFIG_INPUT_ENABLE: if (reg & (LPC18XX_SCU_I2C0_EZI << shift)) *arg = 1; else return -EINVAL; break; case PIN_CONFIG_SLEW_RATE: if (reg & (LPC18XX_SCU_I2C0_EHD << shift)) *arg = 1; else *arg = 0; break; case PIN_CONFIG_INPUT_SCHMITT: if (reg & (LPC18XX_SCU_I2C0_EFP << shift)) *arg = 3; else *arg = 50; break; case PIN_CONFIG_INPUT_SCHMITT_ENABLE: if (reg & (LPC18XX_SCU_I2C0_ZIF << shift)) return -EINVAL; else *arg = 1; break; default: return -ENOTSUPP; } return 0; } static int lpc18xx_pin_to_gpio(struct pinctrl_dev *pctldev, unsigned pin) { struct pinctrl_gpio_range *range; range = pinctrl_find_gpio_range_from_pin_nolock(pctldev, pin); if (!range) return -EINVAL; return pin - range->pin_base + range->base; } static int lpc18xx_get_pintsel(void __iomem *addr, u32 val, int *arg) { u32 reg_val; int i; reg_val = readl(addr); for (i = 0; i < LPC18XX_SCU_IRQ_PER_PINTSEL; i++) { if ((reg_val & LPC18XX_SCU_PINTSEL_VAL_MASK) == val) return 0; reg_val >>= BITS_PER_BYTE; *arg += 1; } return -EINVAL; } static u32 lpc18xx_gpio_to_pintsel_val(int gpio) { unsigned int gpio_port, gpio_pin; gpio_port = gpio / LPC18XX_GPIO_PINS_PER_PORT; gpio_pin = gpio % LPC18XX_GPIO_PINS_PER_PORT; return gpio_pin | (gpio_port << LPC18XX_SCU_PINTSEL_PORT_SHIFT); } static int lpc18xx_pconf_get_gpio_pin_int(struct pinctrl_dev *pctldev, int *arg, unsigned pin) { struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev); int gpio, ret; u32 val; gpio = lpc18xx_pin_to_gpio(pctldev, pin); if (gpio < 0) return -ENOTSUPP; val = lpc18xx_gpio_to_pintsel_val(gpio); /* * Check if this pin has been enabled as a interrupt in any of the two * PINTSEL registers. *arg indicates which interrupt number (0-7). */ *arg = 0; ret = lpc18xx_get_pintsel(scu->base + LPC18XX_SCU_PINTSEL0, val, arg); if (ret == 0) return ret; return lpc18xx_get_pintsel(scu->base + LPC18XX_SCU_PINTSEL1, val, arg); } static int lpc18xx_pconf_get_pin(struct pinctrl_dev *pctldev, unsigned param, int *arg, u32 reg, unsigned pin, struct lpc18xx_pin_caps *pin_cap) { switch (param) { case PIN_CONFIG_BIAS_DISABLE: if ((!(reg & LPC18XX_SCU_PIN_EPD)) && (reg & LPC18XX_SCU_PIN_EPUN)) ; else return -EINVAL; break; case PIN_CONFIG_BIAS_PULL_UP: if (reg & LPC18XX_SCU_PIN_EPUN) return -EINVAL; else *arg = 1; break; case PIN_CONFIG_BIAS_PULL_DOWN: if (reg & LPC18XX_SCU_PIN_EPD) *arg = 1; else return -EINVAL; break; case PIN_CONFIG_INPUT_ENABLE: if (reg & LPC18XX_SCU_PIN_EZI) *arg = 1; else return -EINVAL; break; case PIN_CONFIG_SLEW_RATE: if (pin_cap->type == TYPE_HD) return -ENOTSUPP; if (reg & LPC18XX_SCU_PIN_EHS) *arg = 1; else *arg = 0; break; case PIN_CONFIG_INPUT_SCHMITT_ENABLE: if (reg & LPC18XX_SCU_PIN_ZIF) return -EINVAL; else *arg = 1; break; case PIN_CONFIG_DRIVE_STRENGTH: if (pin_cap->type != TYPE_HD) return -ENOTSUPP; *arg = (reg & LPC18XX_SCU_PIN_EHD_MASK) >> LPC18XX_SCU_PIN_EHD_POS; switch (*arg) { case 3: *arg += 5; /* fall through */ case 2: *arg += 5; /* fall through */ case 1: *arg += 3; /* fall through */ case 0: *arg += 4; } break; case PIN_CONFIG_GPIO_PIN_INT: return lpc18xx_pconf_get_gpio_pin_int(pctldev, arg, pin); default: return -ENOTSUPP; } return 0; } static struct lpc18xx_pin_caps *lpc18xx_get_pin_caps(unsigned pin) { int i; for (i = 0; i < ARRAY_SIZE(lpc18xx_pins); i++) { if (lpc18xx_pins[i].number == pin) return lpc18xx_pins[i].drv_data; } return NULL; } static int lpc18xx_pconf_get(struct pinctrl_dev *pctldev, unsigned pin, unsigned long *config) { struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev); enum pin_config_param param = pinconf_to_config_param(*config); struct lpc18xx_pin_caps *pin_cap; int ret, arg = 0; u32 reg; pin_cap = lpc18xx_get_pin_caps(pin); if (!pin_cap) return -EINVAL; reg = readl(scu->base + pin_cap->offset); if (pin_cap->type == TYPE_I2C0) ret = lpc18xx_pconf_get_i2c0(param, &arg, reg, pin); else if (pin_cap->type == TYPE_USB1) ret = lpc18xx_pconf_get_usb1(param, &arg, reg); else ret = lpc18xx_pconf_get_pin(pctldev, param, &arg, reg, pin, pin_cap); if (ret < 0) return ret; *config = pinconf_to_config_packed(param, (u16)arg); return 0; } static int lpc18xx_pconf_set_usb1(struct pinctrl_dev *pctldev, enum pin_config_param param, u32 param_val, u32 *reg) { switch (param) { case PIN_CONFIG_LOW_POWER_MODE: if (param_val) *reg &= ~LPC18XX_SCU_USB1_EPWR; else *reg |= LPC18XX_SCU_USB1_EPWR; break; case PIN_CONFIG_BIAS_DISABLE: *reg &= ~LPC18XX_SCU_USB1_EPD; break; case PIN_CONFIG_BIAS_PULL_DOWN: *reg |= LPC18XX_SCU_USB1_EPD; break; default: dev_err(pctldev->dev, "Property not supported\n"); return -ENOTSUPP; } return 0; } static int lpc18xx_pconf_set_i2c0(struct pinctrl_dev *pctldev, enum pin_config_param param, u32 param_val, u32 *reg, unsigned pin) { u8 shift; if (pin == PIN_I2C0_SCL) shift = LPC18XX_SCU_I2C0_SCL_SHIFT; else shift = LPC18XX_SCU_I2C0_SDA_SHIFT; switch (param) { case PIN_CONFIG_INPUT_ENABLE: if (param_val) *reg |= (LPC18XX_SCU_I2C0_EZI << shift); else *reg &= ~(LPC18XX_SCU_I2C0_EZI << shift); break; case PIN_CONFIG_SLEW_RATE: if (param_val) *reg |= (LPC18XX_SCU_I2C0_EHD << shift); else *reg &= ~(LPC18XX_SCU_I2C0_EHD << shift); break; case PIN_CONFIG_INPUT_SCHMITT: if (param_val == 3) *reg |= (LPC18XX_SCU_I2C0_EFP << shift); else if (param_val == 50) *reg &= ~(LPC18XX_SCU_I2C0_EFP << shift); else return -ENOTSUPP; break; case PIN_CONFIG_INPUT_SCHMITT_ENABLE: if (param_val) *reg &= ~(LPC18XX_SCU_I2C0_ZIF << shift); else *reg |= (LPC18XX_SCU_I2C0_ZIF << shift); break; default: dev_err(pctldev->dev, "Property not supported\n"); return -ENOTSUPP; } return 0; } static int lpc18xx_pconf_set_gpio_pin_int(struct pinctrl_dev *pctldev, u32 param_val, unsigned pin) { struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev); u32 val, reg_val, reg_offset = LPC18XX_SCU_PINTSEL0; int gpio; if (param_val >= LPC18XX_GPIO_PIN_INT_MAX) return -EINVAL; gpio = lpc18xx_pin_to_gpio(pctldev, pin); if (gpio < 0) return -ENOTSUPP; val = lpc18xx_gpio_to_pintsel_val(gpio); reg_offset += (param_val / LPC18XX_SCU_IRQ_PER_PINTSEL) * sizeof(u32); reg_val = readl(scu->base + reg_offset); reg_val &= ~LPC18XX_SCU_PINTSEL_VAL(LPC18XX_SCU_PINTSEL_VAL_MASK, param_val); reg_val |= LPC18XX_SCU_PINTSEL_VAL(val, param_val); writel(reg_val, scu->base + reg_offset); return 0; } static int lpc18xx_pconf_set_pin(struct pinctrl_dev *pctldev, unsigned param, u32 param_val, u32 *reg, unsigned pin, struct lpc18xx_pin_caps *pin_cap) { switch (param) { case PIN_CONFIG_BIAS_DISABLE: *reg &= ~LPC18XX_SCU_PIN_EPD; *reg |= LPC18XX_SCU_PIN_EPUN; break; case PIN_CONFIG_BIAS_PULL_UP: *reg &= ~LPC18XX_SCU_PIN_EPUN; break; case PIN_CONFIG_BIAS_PULL_DOWN: *reg |= LPC18XX_SCU_PIN_EPD; break; case PIN_CONFIG_INPUT_ENABLE: if (param_val) *reg |= LPC18XX_SCU_PIN_EZI; else *reg &= ~LPC18XX_SCU_PIN_EZI; break; case PIN_CONFIG_SLEW_RATE: if (pin_cap->type == TYPE_HD) { dev_err(pctldev->dev, "Slew rate unsupported on high-drive pins\n"); return -ENOTSUPP; } if (param_val == 0) *reg &= ~LPC18XX_SCU_PIN_EHS; else *reg |= LPC18XX_SCU_PIN_EHS; break; case PIN_CONFIG_INPUT_SCHMITT_ENABLE: if (param_val) *reg &= ~LPC18XX_SCU_PIN_ZIF; else *reg |= LPC18XX_SCU_PIN_ZIF; break; case PIN_CONFIG_DRIVE_STRENGTH: if (pin_cap->type != TYPE_HD) { dev_err(pctldev->dev, "Drive strength available only on high-drive pins\n"); return -ENOTSUPP; } *reg &= ~LPC18XX_SCU_PIN_EHD_MASK; switch (param_val) { case 20: param_val -= 5; /* fall through */ case 14: param_val -= 5; /* fall through */ case 8: param_val -= 3; /* fall through */ case 4: param_val -= 4; break; default: dev_err(pctldev->dev, "Drive strength %u unsupported\n", param_val); return -ENOTSUPP; } *reg |= param_val << LPC18XX_SCU_PIN_EHD_POS; break; case PIN_CONFIG_GPIO_PIN_INT: return lpc18xx_pconf_set_gpio_pin_int(pctldev, param_val, pin); default: dev_err(pctldev->dev, "Property not supported\n"); return -ENOTSUPP; } return 0; } static int lpc18xx_pconf_set(struct pinctrl_dev *pctldev, unsigned pin, unsigned long *configs, unsigned num_configs) { struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev); struct lpc18xx_pin_caps *pin_cap; enum pin_config_param param; u32 param_val; u32 reg; int ret; int i; pin_cap = lpc18xx_get_pin_caps(pin); if (!pin_cap) return -EINVAL; reg = readl(scu->base + pin_cap->offset); for (i = 0; i < num_configs; i++) { param = pinconf_to_config_param(configs[i]); param_val = pinconf_to_config_argument(configs[i]); if (pin_cap->type == TYPE_I2C0) ret = lpc18xx_pconf_set_i2c0(pctldev, param, param_val, ®, pin); else if (pin_cap->type == TYPE_USB1) ret = lpc18xx_pconf_set_usb1(pctldev, param, param_val, ®); else ret = lpc18xx_pconf_set_pin(pctldev, param, param_val, ®, pin, pin_cap); if (ret) return ret; } writel(reg, scu->base + pin_cap->offset); return 0; } static const struct pinconf_ops lpc18xx_pconf_ops = { .is_generic = true, .pin_config_get = lpc18xx_pconf_get, .pin_config_set = lpc18xx_pconf_set, }; static int lpc18xx_pmx_get_funcs_count(struct pinctrl_dev *pctldev) { return ARRAY_SIZE(lpc18xx_function_names); } static const char *lpc18xx_pmx_get_func_name(struct pinctrl_dev *pctldev, unsigned function) { return lpc18xx_function_names[function]; } static int lpc18xx_pmx_get_func_groups(struct pinctrl_dev *pctldev, unsigned function, const char *const **groups, unsigned *const num_groups) { struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev); *groups = scu->func[function].groups; *num_groups = scu->func[function].ngroups; return 0; } static int lpc18xx_pmx_set(struct pinctrl_dev *pctldev, unsigned function, unsigned group) { struct lpc18xx_scu_data *scu = pinctrl_dev_get_drvdata(pctldev); struct lpc18xx_pin_caps *pin = lpc18xx_pins[group].drv_data; int func; u32 reg; /* Dedicated USB1 and I2C0 pins doesn't support muxing */ if (pin->type == TYPE_USB1) { if (function == FUNC_USB1) return 0; goto fail; } if (pin->type == TYPE_I2C0) { if (function == FUNC_I2C0) return 0; goto fail; } if (function == FUNC_ADC && (pin->analog & LPC18XX_ANALOG_PIN)) { u32 offset; writel(LPC18XX_SCU_ANALOG_PIN_CFG, scu->base + pin->offset); if (LPC18XX_ANALOG_ADC(pin->analog) == 0) offset = LPC18XX_SCU_REG_ENAIO0; else offset = LPC18XX_SCU_REG_ENAIO1; reg = readl(scu->base + offset); reg |= pin->analog & LPC18XX_ANALOG_BIT_MASK; writel(reg, scu->base + offset); return 0; } if (function == FUNC_DAC && (pin->analog & LPC18XX_ANALOG_PIN)) { writel(LPC18XX_SCU_ANALOG_PIN_CFG, scu->base + pin->offset); reg = readl(scu->base + LPC18XX_SCU_REG_ENAIO2); reg |= LPC18XX_SCU_REG_ENAIO2_DAC; writel(reg, scu->base + LPC18XX_SCU_REG_ENAIO2); return 0; } for (func = 0; func < LPC18XX_SCU_FUNC_PER_PIN; func++) { if (function == pin->functions[func]) break; } if (func >= LPC18XX_SCU_FUNC_PER_PIN) goto fail; reg = readl(scu->base + pin->offset); reg &= ~LPC18XX_SCU_PIN_MODE_MASK; writel(reg | func, scu->base + pin->offset); return 0; fail: dev_err(pctldev->dev, "Pin %s can't be %s\n", lpc18xx_pins[group].name, lpc18xx_function_names[function]); return -EINVAL; } static const struct pinmux_ops lpc18xx_pmx_ops = { .get_functions_count = lpc18xx_pmx_get_funcs_count, .get_function_name = lpc18xx_pmx_get_func_name, .get_function_groups = lpc18xx_pmx_get_func_groups, .set_mux = lpc18xx_pmx_set, }; static int lpc18xx_pctl_get_groups_count(struct pinctrl_dev *pctldev) { return ARRAY_SIZE(lpc18xx_pins); } static const char *lpc18xx_pctl_get_group_name(struct pinctrl_dev *pctldev, unsigned group) { return lpc18xx_pins[group].name; } static int lpc18xx_pctl_get_group_pins(struct pinctrl_dev *pctldev, unsigned group, const unsigned **pins, unsigned *num_pins) { *pins = &lpc18xx_pins[group].number; *num_pins = 1; return 0; } static const struct pinctrl_ops lpc18xx_pctl_ops = { .get_groups_count = lpc18xx_pctl_get_groups_count, .get_group_name = lpc18xx_pctl_get_group_name, .get_group_pins = lpc18xx_pctl_get_group_pins, .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, .dt_free_map = pinctrl_utils_free_map, }; static struct pinctrl_desc lpc18xx_scu_desc = { .name = "lpc18xx/43xx-scu", .pins = lpc18xx_pins, .npins = ARRAY_SIZE(lpc18xx_pins), .pctlops = &lpc18xx_pctl_ops, .pmxops = &lpc18xx_pmx_ops, .confops = &lpc18xx_pconf_ops, .num_custom_params = ARRAY_SIZE(lpc18xx_params), .custom_params = lpc18xx_params, #ifdef CONFIG_DEBUG_FS .custom_conf_items = lpc18xx_conf_items, #endif .owner = THIS_MODULE, }; static bool lpc18xx_valid_pin_function(unsigned pin, unsigned function) { struct lpc18xx_pin_caps *p = lpc18xx_pins[pin].drv_data; int i; if (function == FUNC_DAC && p->analog == DAC) return true; if (function == FUNC_ADC && p->analog) return true; if (function == FUNC_I2C0 && p->type == TYPE_I2C0) return true; if (function == FUNC_USB1 && p->type == TYPE_USB1) return true; for (i = 0; i < LPC18XX_SCU_FUNC_PER_PIN; i++) { if (function == p->functions[i]) return true; } return false; } static int lpc18xx_create_group_func_map(struct device *dev, struct lpc18xx_scu_data *scu) { u16 pins[ARRAY_SIZE(lpc18xx_pins)]; int func, ngroups, i; for (func = 0; func < FUNC_MAX; func++) { for (ngroups = 0, i = 0; i < ARRAY_SIZE(lpc18xx_pins); i++) { if (lpc18xx_valid_pin_function(i, func)) pins[ngroups++] = i; } scu->func[func].ngroups = ngroups; scu->func[func].groups = devm_kcalloc(dev, ngroups, sizeof(char *), GFP_KERNEL); if (!scu->func[func].groups) return -ENOMEM; for (i = 0; i < ngroups; i++) scu->func[func].groups[i] = lpc18xx_pins[pins[i]].name; } return 0; } static int lpc18xx_scu_probe(struct platform_device *pdev) { struct lpc18xx_scu_data *scu; int ret; scu = devm_kzalloc(&pdev->dev, sizeof(*scu), GFP_KERNEL); if (!scu) return -ENOMEM; scu->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(scu->base)) return PTR_ERR(scu->base); scu->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(scu->clk)) { dev_err(&pdev->dev, "Input clock not found.\n"); return PTR_ERR(scu->clk); } ret = lpc18xx_create_group_func_map(&pdev->dev, scu); if (ret) { dev_err(&pdev->dev, "Unable to create group func map.\n"); return ret; } ret = clk_prepare_enable(scu->clk); if (ret) { dev_err(&pdev->dev, "Unable to enable clock.\n"); return ret; } platform_set_drvdata(pdev, scu); scu->pctl = devm_pinctrl_register(&pdev->dev, &lpc18xx_scu_desc, scu); if (IS_ERR(scu->pctl)) { dev_err(&pdev->dev, "Could not register pinctrl driver\n"); clk_disable_unprepare(scu->clk); return PTR_ERR(scu->pctl); } return 0; } static const struct of_device_id lpc18xx_scu_match[] = { { .compatible = "nxp,lpc1850-scu" }, {}, }; static struct platform_driver lpc18xx_scu_driver = { .probe = lpc18xx_scu_probe, .driver = { .name = "lpc18xx-scu", .of_match_table = lpc18xx_scu_match, .suppress_bind_attrs = true, }, }; builtin_platform_driver(lpc18xx_scu_driver);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1