Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Bo Shen | 1037 | 49.43% | 2 | 8.70% |
Claudiu Beznea | 648 | 30.89% | 6 | 26.09% |
Uwe Kleine-König | 282 | 13.44% | 6 | 26.09% |
Alexandre Belloni | 92 | 4.39% | 3 | 13.04% |
Thierry Reding | 27 | 1.29% | 3 | 13.04% |
Nikolaus Voss | 6 | 0.29% | 1 | 4.35% |
Guillermo Rodriguez | 5 | 0.24% | 1 | 4.35% |
Thomas Gleixner | 1 | 0.05% | 1 | 4.35% |
Total | 2098 | 23 |
// SPDX-License-Identifier: GPL-2.0-only /* * Driver for Atmel Pulse Width Modulation Controller * * Copyright (C) 2013 Atmel Corporation * Bo Shen <voice.shen@atmel.com> * * Links to reference manuals for the supported PWM chips can be found in * Documentation/arm/microchip.rst. * * Limitations: * - Periods start with the inactive level. * - Hardware has to be stopped in general to update settings. * * Software bugs/possible improvements: * - When atmel_pwm_apply() is called with state->enabled=false a change in * state->polarity isn't honored. * - Instead of sleeping to wait for a completed period, the interrupt * functionality could be used. */ #include <linux/clk.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/pwm.h> #include <linux/slab.h> /* The following is global registers for PWM controller */ #define PWM_ENA 0x04 #define PWM_DIS 0x08 #define PWM_SR 0x0C #define PWM_ISR 0x1C /* Bit field in SR */ #define PWM_SR_ALL_CH_ON 0x0F /* The following register is PWM channel related registers */ #define PWM_CH_REG_OFFSET 0x200 #define PWM_CH_REG_SIZE 0x20 #define PWM_CMR 0x0 /* Bit field in CMR */ #define PWM_CMR_CPOL (1 << 9) #define PWM_CMR_UPD_CDTY (1 << 10) #define PWM_CMR_CPRE_MSK 0xF /* The following registers for PWM v1 */ #define PWMV1_CDTY 0x04 #define PWMV1_CPRD 0x08 #define PWMV1_CUPD 0x10 /* The following registers for PWM v2 */ #define PWMV2_CDTY 0x04 #define PWMV2_CDTYUPD 0x08 #define PWMV2_CPRD 0x0C #define PWMV2_CPRDUPD 0x10 #define PWM_MAX_PRES 10 struct atmel_pwm_registers { u8 period; u8 period_upd; u8 duty; u8 duty_upd; }; struct atmel_pwm_config { u32 period_bits; }; struct atmel_pwm_data { struct atmel_pwm_registers regs; struct atmel_pwm_config cfg; }; struct atmel_pwm_chip { struct pwm_chip chip; struct clk *clk; void __iomem *base; const struct atmel_pwm_data *data; unsigned int updated_pwms; /* ISR is cleared when read, ensure only one thread does that */ struct mutex isr_lock; }; static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip) { return container_of(chip, struct atmel_pwm_chip, chip); } static inline u32 atmel_pwm_readl(struct atmel_pwm_chip *chip, unsigned long offset) { return readl_relaxed(chip->base + offset); } static inline void atmel_pwm_writel(struct atmel_pwm_chip *chip, unsigned long offset, unsigned long val) { writel_relaxed(val, chip->base + offset); } static inline u32 atmel_pwm_ch_readl(struct atmel_pwm_chip *chip, unsigned int ch, unsigned long offset) { unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE; return atmel_pwm_readl(chip, base + offset); } static inline void atmel_pwm_ch_writel(struct atmel_pwm_chip *chip, unsigned int ch, unsigned long offset, unsigned long val) { unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE; atmel_pwm_writel(chip, base + offset, val); } static int atmel_pwm_calculate_cprd_and_pres(struct pwm_chip *chip, const struct pwm_state *state, unsigned long *cprd, u32 *pres) { struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); unsigned long long cycles = state->period; int shift; /* Calculate the period cycles and prescale value */ cycles *= clk_get_rate(atmel_pwm->clk); do_div(cycles, NSEC_PER_SEC); /* * The register for the period length is cfg.period_bits bits wide. * So for each bit the number of clock cycles is wider divide the input * clock frequency by two using pres and shift cprd accordingly. */ shift = fls(cycles) - atmel_pwm->data->cfg.period_bits; if (shift > PWM_MAX_PRES) { dev_err(chip->dev, "pres exceeds the maximum value\n"); return -EINVAL; } else if (shift > 0) { *pres = shift; cycles >>= *pres; } else { *pres = 0; } *cprd = cycles; return 0; } static void atmel_pwm_calculate_cdty(const struct pwm_state *state, unsigned long cprd, unsigned long *cdty) { unsigned long long cycles = state->duty_cycle; cycles *= cprd; do_div(cycles, state->period); *cdty = cprd - cycles; } static void atmel_pwm_update_cdty(struct pwm_chip *chip, struct pwm_device *pwm, unsigned long cdty) { struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); u32 val; if (atmel_pwm->data->regs.duty_upd == atmel_pwm->data->regs.period_upd) { val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR); val &= ~PWM_CMR_UPD_CDTY; atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val); } atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, atmel_pwm->data->regs.duty_upd, cdty); } static void atmel_pwm_set_cprd_cdty(struct pwm_chip *chip, struct pwm_device *pwm, unsigned long cprd, unsigned long cdty) { struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, atmel_pwm->data->regs.duty, cdty); atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, atmel_pwm->data->regs.period, cprd); } static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm, bool disable_clk) { struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); unsigned long timeout = jiffies + 2 * HZ; /* * Wait for at least a complete period to have passed before disabling a * channel to be sure that CDTY has been updated */ mutex_lock(&atmel_pwm->isr_lock); atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR); while (!(atmel_pwm->updated_pwms & (1 << pwm->hwpwm)) && time_before(jiffies, timeout)) { usleep_range(10, 100); atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR); } mutex_unlock(&atmel_pwm->isr_lock); atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm); /* * Wait for the PWM channel disable operation to be effective before * stopping the clock. */ timeout = jiffies + 2 * HZ; while ((atmel_pwm_readl(atmel_pwm, PWM_SR) & (1 << pwm->hwpwm)) && time_before(jiffies, timeout)) usleep_range(10, 100); if (disable_clk) clk_disable(atmel_pwm->clk); } static int atmel_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, const struct pwm_state *state) { struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); struct pwm_state cstate; unsigned long cprd, cdty; u32 pres, val; int ret; pwm_get_state(pwm, &cstate); if (state->enabled) { if (cstate.enabled && cstate.polarity == state->polarity && cstate.period == state->period) { cprd = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, atmel_pwm->data->regs.period); atmel_pwm_calculate_cdty(state, cprd, &cdty); atmel_pwm_update_cdty(chip, pwm, cdty); return 0; } ret = atmel_pwm_calculate_cprd_and_pres(chip, state, &cprd, &pres); if (ret) { dev_err(chip->dev, "failed to calculate cprd and prescaler\n"); return ret; } atmel_pwm_calculate_cdty(state, cprd, &cdty); if (cstate.enabled) { atmel_pwm_disable(chip, pwm, false); } else { ret = clk_enable(atmel_pwm->clk); if (ret) { dev_err(chip->dev, "failed to enable clock\n"); return ret; } } /* It is necessary to preserve CPOL, inside CMR */ val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR); val = (val & ~PWM_CMR_CPRE_MSK) | (pres & PWM_CMR_CPRE_MSK); if (state->polarity == PWM_POLARITY_NORMAL) val &= ~PWM_CMR_CPOL; else val |= PWM_CMR_CPOL; atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val); atmel_pwm_set_cprd_cdty(chip, pwm, cprd, cdty); mutex_lock(&atmel_pwm->isr_lock); atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR); atmel_pwm->updated_pwms &= ~(1 << pwm->hwpwm); mutex_unlock(&atmel_pwm->isr_lock); atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm); } else if (cstate.enabled) { atmel_pwm_disable(chip, pwm, true); } return 0; } static void atmel_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_state *state) { struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip); u32 sr, cmr; sr = atmel_pwm_readl(atmel_pwm, PWM_SR); cmr = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR); if (sr & (1 << pwm->hwpwm)) { unsigned long rate = clk_get_rate(atmel_pwm->clk); u32 cdty, cprd, pres; u64 tmp; pres = cmr & PWM_CMR_CPRE_MSK; cprd = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, atmel_pwm->data->regs.period); tmp = (u64)cprd * NSEC_PER_SEC; tmp <<= pres; state->period = DIV64_U64_ROUND_UP(tmp, rate); cdty = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, atmel_pwm->data->regs.duty); tmp = (u64)cdty * NSEC_PER_SEC; tmp <<= pres; state->duty_cycle = DIV64_U64_ROUND_UP(tmp, rate); state->enabled = true; } else { state->enabled = false; } if (cmr & PWM_CMR_CPOL) state->polarity = PWM_POLARITY_INVERSED; else state->polarity = PWM_POLARITY_NORMAL; } static const struct pwm_ops atmel_pwm_ops = { .apply = atmel_pwm_apply, .get_state = atmel_pwm_get_state, .owner = THIS_MODULE, }; static const struct atmel_pwm_data atmel_sam9rl_pwm_data = { .regs = { .period = PWMV1_CPRD, .period_upd = PWMV1_CUPD, .duty = PWMV1_CDTY, .duty_upd = PWMV1_CUPD, }, .cfg = { /* 16 bits to keep period and duty. */ .period_bits = 16, }, }; static const struct atmel_pwm_data atmel_sama5_pwm_data = { .regs = { .period = PWMV2_CPRD, .period_upd = PWMV2_CPRDUPD, .duty = PWMV2_CDTY, .duty_upd = PWMV2_CDTYUPD, }, .cfg = { /* 16 bits to keep period and duty. */ .period_bits = 16, }, }; static const struct atmel_pwm_data mchp_sam9x60_pwm_data = { .regs = { .period = PWMV1_CPRD, .period_upd = PWMV1_CUPD, .duty = PWMV1_CDTY, .duty_upd = PWMV1_CUPD, }, .cfg = { /* 32 bits to keep period and duty. */ .period_bits = 32, }, }; static const struct of_device_id atmel_pwm_dt_ids[] = { { .compatible = "atmel,at91sam9rl-pwm", .data = &atmel_sam9rl_pwm_data, }, { .compatible = "atmel,sama5d3-pwm", .data = &atmel_sama5_pwm_data, }, { .compatible = "atmel,sama5d2-pwm", .data = &atmel_sama5_pwm_data, }, { .compatible = "microchip,sam9x60-pwm", .data = &mchp_sam9x60_pwm_data, }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids); static int atmel_pwm_probe(struct platform_device *pdev) { struct atmel_pwm_chip *atmel_pwm; struct resource *res; int ret; atmel_pwm = devm_kzalloc(&pdev->dev, sizeof(*atmel_pwm), GFP_KERNEL); if (!atmel_pwm) return -ENOMEM; mutex_init(&atmel_pwm->isr_lock); atmel_pwm->data = of_device_get_match_data(&pdev->dev); atmel_pwm->updated_pwms = 0; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); atmel_pwm->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(atmel_pwm->base)) return PTR_ERR(atmel_pwm->base); atmel_pwm->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(atmel_pwm->clk)) return PTR_ERR(atmel_pwm->clk); ret = clk_prepare(atmel_pwm->clk); if (ret) { dev_err(&pdev->dev, "failed to prepare PWM clock\n"); return ret; } atmel_pwm->chip.dev = &pdev->dev; atmel_pwm->chip.ops = &atmel_pwm_ops; atmel_pwm->chip.of_xlate = of_pwm_xlate_with_flags; atmel_pwm->chip.of_pwm_n_cells = 3; atmel_pwm->chip.base = -1; atmel_pwm->chip.npwm = 4; ret = pwmchip_add(&atmel_pwm->chip); if (ret < 0) { dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret); goto unprepare_clk; } platform_set_drvdata(pdev, atmel_pwm); return ret; unprepare_clk: clk_unprepare(atmel_pwm->clk); return ret; } static int atmel_pwm_remove(struct platform_device *pdev) { struct atmel_pwm_chip *atmel_pwm = platform_get_drvdata(pdev); clk_unprepare(atmel_pwm->clk); mutex_destroy(&atmel_pwm->isr_lock); return pwmchip_remove(&atmel_pwm->chip); } static struct platform_driver atmel_pwm_driver = { .driver = { .name = "atmel-pwm", .of_match_table = of_match_ptr(atmel_pwm_dt_ids), }, .probe = atmel_pwm_probe, .remove = atmel_pwm_remove, }; module_platform_driver(atmel_pwm_driver); MODULE_ALIAS("platform:atmel-pwm"); MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>"); MODULE_DESCRIPTION("Atmel PWM driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1