| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| James Bottomley | 6816 | 99.80% | 1 | 16.67% |
| Gilbert Wu | 8 | 0.12% | 1 | 16.67% |
| Thomas Gleixner | 2 | 0.03% | 1 | 16.67% |
| Uwe Kleine-König | 2 | 0.03% | 1 | 16.67% |
| Lucas De Marchi | 1 | 0.01% | 1 | 16.67% |
| Matt LaPlante | 1 | 0.01% | 1 | 16.67% |
| Total | 6830 | 6 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * Aic94xx SAS/SATA driver hardware registers definitions. * * Copyright (C) 2004 Adaptec, Inc. All rights reserved. * Copyright (C) 2004 David Chaw <david_chaw@adaptec.com> * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> * * Luben Tuikov: Some register value updates to make it work with the window * agnostic register r/w functions. Some register corrections, sizes, * etc. * * $Id: //depot/aic94xx/aic94xx_reg_def.h#27 $ */ #ifndef _ADP94XX_REG_DEF_H_ #define _ADP94XX_REG_DEF_H_ /* * Common definitions. */ #define CSEQ_MODE_PAGE_SIZE 0x200 /* CSEQ mode page size */ #define LmSEQ_MODE_PAGE_SIZE 0x200 /* LmSEQ mode page size */ #define LmSEQ_HOST_REG_SIZE 0x4000 /* LmSEQ Host Register size */ /********************* COM_SAS registers definition *************************/ /* The base is REG_BASE_ADDR, defined in aic94xx_reg.h. */ /* * CHIM Registers, Address Range : (0x00-0xFF) */ #define COMBIST (REG_BASE_ADDR + 0x00) /* bits 31:24 */ #define L7BLKRST 0x80000000 #define L6BLKRST 0x40000000 #define L5BLKRST 0x20000000 #define L4BLKRST 0x10000000 #define L3BLKRST 0x08000000 #define L2BLKRST 0x04000000 #define L1BLKRST 0x02000000 #define L0BLKRST 0x01000000 #define LmBLKRST 0xFF000000 #define LmBLKRST_COMBIST(phyid) (1 << (24 + phyid)) #define OCMBLKRST 0x00400000 #define CTXMEMBLKRST 0x00200000 #define CSEQBLKRST 0x00100000 #define EXSIBLKRST 0x00040000 #define DPIBLKRST 0x00020000 #define DFIFBLKRST 0x00010000 #define HARDRST 0x00000200 #define COMBLKRST 0x00000100 #define FRCDFPERR 0x00000080 #define FRCCIOPERR 0x00000020 #define FRCBISTERR 0x00000010 #define COMBISTEN 0x00000004 #define COMBISTDONE 0x00000002 /* ro */ #define COMBISTFAIL 0x00000001 /* ro */ #define COMSTAT (REG_BASE_ADDR + 0x04) #define REQMBXREAD 0x00000040 #define RSPMBXAVAIL 0x00000020 #define CSBUFPERR 0x00000008 #define OVLYERR 0x00000004 #define CSERR 0x00000002 #define OVLYDMADONE 0x00000001 #define COMSTAT_MASK (REQMBXREAD | RSPMBXAVAIL | \ CSBUFPERR | OVLYERR | CSERR |\ OVLYDMADONE) #define COMSTATEN (REG_BASE_ADDR + 0x08) #define EN_REQMBXREAD 0x00000040 #define EN_RSPMBXAVAIL 0x00000020 #define EN_CSBUFPERR 0x00000008 #define EN_OVLYERR 0x00000004 #define EN_CSERR 0x00000002 #define EN_OVLYDONE 0x00000001 #define SCBPRO (REG_BASE_ADDR + 0x0C) #define SCBCONS_MASK 0xFFFF0000 #define SCBPRO_MASK 0x0000FFFF #define CHIMREQMBX (REG_BASE_ADDR + 0x10) #define CHIMRSPMBX (REG_BASE_ADDR + 0x14) #define CHIMINT (REG_BASE_ADDR + 0x18) #define EXT_INT0 0x00000800 #define EXT_INT1 0x00000400 #define PORRSTDET 0x00000200 #define HARDRSTDET 0x00000100 #define DLAVAILQ 0x00000080 /* ro */ #define HOSTERR 0x00000040 #define INITERR 0x00000020 #define DEVINT 0x00000010 #define COMINT 0x00000008 #define DEVTIMER2 0x00000004 #define DEVTIMER1 0x00000002 #define DLAVAIL 0x00000001 #define CHIMINT_MASK (HOSTERR | INITERR | DEVINT | COMINT |\ DEVTIMER2 | DEVTIMER1 | DLAVAIL) #define DEVEXCEPT_MASK (HOSTERR | INITERR | DEVINT | COMINT) #define CHIMINTEN (REG_BASE_ADDR + 0x1C) #define RST_EN_EXT_INT1 0x01000000 #define RST_EN_EXT_INT0 0x00800000 #define RST_EN_HOSTERR 0x00400000 #define RST_EN_INITERR 0x00200000 #define RST_EN_DEVINT 0x00100000 #define RST_EN_COMINT 0x00080000 #define RST_EN_DEVTIMER2 0x00040000 #define RST_EN_DEVTIMER1 0x00020000 #define RST_EN_DLAVAIL 0x00010000 #define SET_EN_EXT_INT1 0x00000100 #define SET_EN_EXT_INT0 0x00000080 #define SET_EN_HOSTERR 0x00000040 #define SET_EN_INITERR 0x00000020 #define SET_EN_DEVINT 0x00000010 #define SET_EN_COMINT 0x00000008 #define SET_EN_DEVTIMER2 0x00000004 #define SET_EN_DEVTIMER1 0x00000002 #define SET_EN_DLAVAIL 0x00000001 #define RST_CHIMINTEN (RST_EN_HOSTERR | RST_EN_INITERR | \ RST_EN_DEVINT | RST_EN_COMINT | \ RST_EN_DEVTIMER2 | RST_EN_DEVTIMER1 |\ RST_EN_DLAVAIL) #define SET_CHIMINTEN (SET_EN_HOSTERR | SET_EN_INITERR |\ SET_EN_DEVINT | SET_EN_COMINT |\ SET_EN_DLAVAIL) #define OVLYDMACTL (REG_BASE_ADDR + 0x20) #define OVLYADR_MASK 0x07FF0000 #define OVLYLSEQ_MASK 0x0000FF00 #define OVLYCSEQ 0x00000080 #define OVLYHALTERR 0x00000040 #define PIOCMODE 0x00000020 #define RESETOVLYDMA 0x00000008 /* wo */ #define STARTOVLYDMA 0x00000004 #define STOPOVLYDMA 0x00000002 /* wo */ #define OVLYDMAACT 0x00000001 /* ro */ #define OVLYDMACNT (REG_BASE_ADDR + 0x24) #define OVLYDOMAIN1 0x20000000 /* ro */ #define OVLYDOMAIN0 0x10000000 #define OVLYBUFADR_MASK 0x007F0000 #define OVLYDMACNT_MASK 0x00003FFF #define OVLYDMAADR (REG_BASE_ADDR + 0x28) #define DMAERR (REG_BASE_ADDR + 0x30) #define OVLYERRSTAT_MASK 0x0000FF00 /* ro */ #define CSERRSTAT_MASK 0x000000FF /* ro */ #define SPIODATA (REG_BASE_ADDR + 0x34) /* 0x38 - 0x3C are reserved */ #define T1CNTRLR (REG_BASE_ADDR + 0x40) #define T1DONE 0x00010000 /* ro */ #define TIMER64 0x00000400 #define T1ENABLE 0x00000200 #define T1RELOAD 0x00000100 #define T1PRESCALER_MASK 0x00000003 #define T1CMPR (REG_BASE_ADDR + 0x44) #define T1CNTR (REG_BASE_ADDR + 0x48) #define T2CNTRLR (REG_BASE_ADDR + 0x4C) #define T2DONE 0x00010000 /* ro */ #define T2ENABLE 0x00000200 #define T2RELOAD 0x00000100 #define T2PRESCALER_MASK 0x00000003 #define T2CMPR (REG_BASE_ADDR + 0x50) #define T2CNTR (REG_BASE_ADDR + 0x54) /* 0x58h - 0xFCh are reserved */ /* * DCH_SAS Registers, Address Range : (0x800-0xFFF) */ #define CMDCTXBASE (REG_BASE_ADDR + 0x800) #define DEVCTXBASE (REG_BASE_ADDR + 0x808) #define CTXDOMAIN (REG_BASE_ADDR + 0x810) #define DEVCTXDOMAIN1 0x00000008 /* ro */ #define DEVCTXDOMAIN0 0x00000004 #define CMDCTXDOMAIN1 0x00000002 /* ro */ #define CMDCTXDOMAIN0 0x00000001 #define DCHCTL (REG_BASE_ADDR + 0x814) #define OCMBISTREPAIR 0x00080000 #define OCMBISTEN 0x00040000 #define OCMBISTDN 0x00020000 /* ro */ #define OCMBISTFAIL 0x00010000 /* ro */ #define DDBBISTEN 0x00004000 #define DDBBISTDN 0x00002000 /* ro */ #define DDBBISTFAIL 0x00001000 /* ro */ #define SCBBISTEN 0x00000400 #define SCBBISTDN 0x00000200 /* ro */ #define SCBBISTFAIL 0x00000100 /* ro */ #define MEMSEL_MASK 0x000000E0 #define MEMSEL_CCM_LSEQ 0x00000000 #define MEMSEL_CCM_IOP 0x00000020 #define MEMSEL_CCM_SASCTL 0x00000040 #define MEMSEL_DCM_LSEQ 0x00000060 #define MEMSEL_DCM_IOP 0x00000080 #define MEMSEL_OCM 0x000000A0 #define FRCERR 0x00000010 #define AUTORLS 0x00000001 #define DCHREVISION (REG_BASE_ADDR + 0x818) #define DCHREVISION_MASK 0x000000FF #define DCHSTATUS (REG_BASE_ADDR + 0x81C) #define EN_CFIFTOERR 0x00020000 #define CFIFTOERR 0x00000200 #define CSEQINT 0x00000100 /* ro */ #define LSEQ7INT 0x00000080 /* ro */ #define LSEQ6INT 0x00000040 /* ro */ #define LSEQ5INT 0x00000020 /* ro */ #define LSEQ4INT 0x00000010 /* ro */ #define LSEQ3INT 0x00000008 /* ro */ #define LSEQ2INT 0x00000004 /* ro */ #define LSEQ1INT 0x00000002 /* ro */ #define LSEQ0INT 0x00000001 /* ro */ #define LSEQINT_MASK (LSEQ7INT | LSEQ6INT | LSEQ5INT |\ LSEQ4INT | LSEQ3INT | LSEQ2INT |\ LSEQ1INT | LSEQ0INT) #define DCHDFIFDEBUG (REG_BASE_ADDR + 0x820) #define ENFAIRMST 0x00FF0000 #define DISWRMST9 0x00000200 #define DISWRMST8 0x00000100 #define DISRDMST 0x000000FF #define ATOMICSTATCTL (REG_BASE_ADDR + 0x824) /* 8 bit wide */ #define AUTOINC 0x80 #define ATOMICERR 0x04 #define ATOMICWIN 0x02 #define ATOMICDONE 0x01 #define ALTCIOADR (REG_BASE_ADDR + 0x828) /* 16 bit; bits 8:0 define CIO addr space of CSEQ */ #define ASCBPTR (REG_BASE_ADDR + 0x82C) /* 16 bit wide */ #define ADDBPTR (REG_BASE_ADDR + 0x82E) /* 16 bit wide */ #define ANEWDATA (REG_BASE_ADDR + 0x830) /* 16 bit */ #define AOLDDATA (REG_BASE_ADDR + 0x834) /* 16 bit */ #define CTXACCESS (REG_BASE_ADDR + 0x838) /* 32 bit */ /* 0x83Ch - 0xFFCh are reserved */ /* * ARP2 External Processor Registers, Address Range : (0x00-0x1F) */ #define ARP2CTL 0x00 #define FRCSCRPERR 0x00040000 #define FRCARP2PERR 0x00020000 #define FRCARP2ILLOPC 0x00010000 #define ENWAITTO 0x00008000 #define PERRORDIS 0x00004000 #define FAILDIS 0x00002000 #define CIOPERRDIS 0x00001000 #define BREAKEN3 0x00000800 #define BREAKEN2 0x00000400 #define BREAKEN1 0x00000200 #define BREAKEN0 0x00000100 #define EPAUSE 0x00000008 #define PAUSED 0x00000004 /* ro */ #define STEP 0x00000002 #define ARP2RESET 0x00000001 /* wo */ #define ARP2INT 0x04 #define HALTCODE_MASK 0x00FF0000 /* ro */ #define ARP2WAITTO 0x00000100 #define ARP2HALTC 0x00000080 #define ARP2ILLOPC 0x00000040 #define ARP2PERR 0x00000020 #define ARP2CIOPERR 0x00000010 #define ARP2BREAK3 0x00000008 #define ARP2BREAK2 0x00000004 #define ARP2BREAK1 0x00000002 #define ARP2BREAK0 0x00000001 #define ARP2INTEN 0x08 #define EN_ARP2WAITTO 0x00000100 #define EN_ARP2HALTC 0x00000080 #define EN_ARP2ILLOPC 0x00000040 #define EN_ARP2PERR 0x00000020 #define EN_ARP2CIOPERR 0x00000010 #define EN_ARP2BREAK3 0x00000008 #define EN_ARP2BREAK2 0x00000004 #define EN_ARP2BREAK1 0x00000002 #define EN_ARP2BREAK0 0x00000001 #define ARP2BREAKADR01 0x0C #define BREAKADR1_MASK 0x0FFF0000 #define BREAKADR0_MASK 0x00000FFF #define ARP2BREAKADR23 0x10 #define BREAKADR3_MASK 0x0FFF0000 #define BREAKADR2_MASK 0x00000FFF /* 0x14h - 0x1Ch are reserved */ /* * ARP2 Registers, Address Range : (0x00-0x1F) * The definitions have the same address offset for CSEQ and LmSEQ * CIO Bus Registers. */ #define MODEPTR 0x00 #define DSTMODE 0xF0 #define SRCMODE 0x0F #define ALTMODE 0x01 #define ALTDMODE 0xF0 #define ALTSMODE 0x0F #define ATOMICXCHG 0x02 #define FLAG 0x04 #define INTCODE_MASK 0xF0 #define ALTMODEV2 0x04 #define CARRY_INT 0x02 #define CARRY 0x01 #define ARP2INTCTL 0x05 #define PAUSEDIS 0x80 #define RSTINTCTL 0x40 #define POPALTMODE 0x08 #define ALTMODEV 0x04 #define INTMASK 0x02 #define IRET 0x01 #define STACK 0x06 #define FUNCTION1 0x07 #define PRGMCNT 0x08 #define ACCUM 0x0A #define SINDEX 0x0C #define DINDEX 0x0E #define ALLONES 0x10 #define ALLZEROS 0x11 #define SINDIR 0x12 #define DINDIR 0x13 #define JUMLDIR 0x14 #define ARP2HALTCODE 0x15 #define CURRADDR 0x16 #define LASTADDR 0x18 #define NXTLADDR 0x1A #define DBGPORTPTR 0x1C #define DBGPORT 0x1D /* * CIO Registers. * The definitions have the same address offset for CSEQ and LmSEQ * CIO Bus Registers. */ #define MnSCBPTR 0x20 #define MnDDBPTR 0x22 #define SCRATCHPAGE 0x24 #define MnSCRATCHPAGE 0x25 #define SCRATCHPAGESV 0x26 #define MnSCRATCHPAGESV 0x27 #define MnDMAERRS 0x46 #define MnSGDMAERRS 0x47 #define MnSGBUF 0x53 #define MnSGDMASTAT 0x5b #define MnDDMACTL 0x5c /* RAZOR.rspec.fm rev 1.5 is wrong */ #define MnDDMASTAT 0x5d /* RAZOR.rspec.fm rev 1.5 is wrong */ #define MnDDMAMODE 0x5e /* RAZOR.rspec.fm rev 1.5 is wrong */ #define MnDMAENG 0x60 #define MnPIPECTL 0x61 #define MnSGBADR 0x65 #define MnSCB_SITE 0x100 #define MnDDB_SITE 0x180 /* * The common definitions below have the same address offset for both * CSEQ and LmSEQ. */ #define BISTCTL0 0x4C #define BISTCTL1 0x50 #define MAPPEDSCR 0x800 /* * CSEQ Host Register, Address Range : (0x000-0xFFC) */ #define CSEQ_HOST_REG_BASE_ADR 0xB8001000 #define CARP2CTL (CSEQ_HOST_REG_BASE_ADR + ARP2CTL) #define CARP2INT (CSEQ_HOST_REG_BASE_ADR + ARP2INT) #define CARP2INTEN (CSEQ_HOST_REG_BASE_ADR + ARP2INTEN) #define CARP2BREAKADR01 (CSEQ_HOST_REG_BASE_ADR+ARP2BREAKADR01) #define CARP2BREAKADR23 (CSEQ_HOST_REG_BASE_ADR+ARP2BREAKADR23) #define CBISTCTL (CSEQ_HOST_REG_BASE_ADR + BISTCTL1) #define CSEQRAMBISTEN 0x00000040 #define CSEQRAMBISTDN 0x00000020 /* ro */ #define CSEQRAMBISTFAIL 0x00000010 /* ro */ #define CSEQSCRBISTEN 0x00000004 #define CSEQSCRBISTDN 0x00000002 /* ro */ #define CSEQSCRBISTFAIL 0x00000001 /* ro */ #define CMAPPEDSCR (CSEQ_HOST_REG_BASE_ADR + MAPPEDSCR) /* * CSEQ CIO Bus Registers, Address Range : (0x0000-0x1FFC) * 16 modes, each mode is 512 bytes. * Unless specified, the register should valid for all modes. */ #define CSEQ_CIO_REG_BASE_ADR REG_BASE_ADDR_CSEQCIO #define CSEQm_CIO_REG(Mode, Reg) \ (CSEQ_CIO_REG_BASE_ADR + \ ((u32) (Mode) * CSEQ_MODE_PAGE_SIZE) + (u32) (Reg)) #define CMODEPTR (CSEQ_CIO_REG_BASE_ADR + MODEPTR) #define CALTMODE (CSEQ_CIO_REG_BASE_ADR + ALTMODE) #define CATOMICXCHG (CSEQ_CIO_REG_BASE_ADR + ATOMICXCHG) #define CFLAG (CSEQ_CIO_REG_BASE_ADR + FLAG) #define CARP2INTCTL (CSEQ_CIO_REG_BASE_ADR + ARP2INTCTL) #define CSTACK (CSEQ_CIO_REG_BASE_ADR + STACK) #define CFUNCTION1 (CSEQ_CIO_REG_BASE_ADR + FUNCTION1) #define CPRGMCNT (CSEQ_CIO_REG_BASE_ADR + PRGMCNT) #define CACCUM (CSEQ_CIO_REG_BASE_ADR + ACCUM) #define CSINDEX (CSEQ_CIO_REG_BASE_ADR + SINDEX) #define CDINDEX (CSEQ_CIO_REG_BASE_ADR + DINDEX) #define CALLONES (CSEQ_CIO_REG_BASE_ADR + ALLONES) #define CALLZEROS (CSEQ_CIO_REG_BASE_ADR + ALLZEROS) #define CSINDIR (CSEQ_CIO_REG_BASE_ADR + SINDIR) #define CDINDIR (CSEQ_CIO_REG_BASE_ADR + DINDIR) #define CJUMLDIR (CSEQ_CIO_REG_BASE_ADR + JUMLDIR) #define CARP2HALTCODE (CSEQ_CIO_REG_BASE_ADR + ARP2HALTCODE) #define CCURRADDR (CSEQ_CIO_REG_BASE_ADR + CURRADDR) #define CLASTADDR (CSEQ_CIO_REG_BASE_ADR + LASTADDR) #define CNXTLADDR (CSEQ_CIO_REG_BASE_ADR + NXTLADDR) #define CDBGPORTPTR (CSEQ_CIO_REG_BASE_ADR + DBGPORTPTR) #define CDBGPORT (CSEQ_CIO_REG_BASE_ADR + DBGPORT) #define CSCRATCHPAGE (CSEQ_CIO_REG_BASE_ADR + SCRATCHPAGE) #define CMnSCBPTR(Mode) CSEQm_CIO_REG(Mode, MnSCBPTR) #define CMnDDBPTR(Mode) CSEQm_CIO_REG(Mode, MnDDBPTR) #define CMnSCRATCHPAGE(Mode) CSEQm_CIO_REG(Mode, MnSCRATCHPAGE) #define CLINKCON (CSEQ_CIO_REG_BASE_ADR + 0x28) #define CCIOAACESS (CSEQ_CIO_REG_BASE_ADR + 0x2C) /* mode 0-7 */ #define MnREQMBX 0x30 #define CMnREQMBX(Mode) CSEQm_CIO_REG(Mode, 0x30) /* mode 8 */ #define CSEQCON CSEQm_CIO_REG(8, 0x30) /* mode 0-7 */ #define MnRSPMBX 0x34 #define CMnRSPMBX(Mode) CSEQm_CIO_REG(Mode, 0x34) /* mode 8 */ #define CSEQCOMCTL CSEQm_CIO_REG(8, 0x34) /* mode 8 */ #define CSEQCOMSTAT CSEQm_CIO_REG(8, 0x35) /* mode 8 */ #define CSEQCOMINTEN CSEQm_CIO_REG(8, 0x36) /* mode 8 */ #define CSEQCOMDMACTL CSEQm_CIO_REG(8, 0x37) #define CSHALTERR 0x10 #define RESETCSDMA 0x08 /* wo */ #define STARTCSDMA 0x04 #define STOPCSDMA 0x02 /* wo */ #define CSDMAACT 0x01 /* ro */ /* mode 0-7 */ #define MnINT 0x38 #define CMnINT(Mode) CSEQm_CIO_REG(Mode, 0x38) #define CMnREQMBXE 0x02 #define CMnRSPMBXF 0x01 #define CMnINT_MASK 0x00000003 /* mode 8 */ #define CSEQREQMBX CSEQm_CIO_REG(8, 0x38) /* mode 0-7 */ #define MnINTEN 0x3C #define CMnINTEN(Mode) CSEQm_CIO_REG(Mode, 0x3C) #define EN_CMnRSPMBXF 0x01 /* mode 8 */ #define CSEQRSPMBX CSEQm_CIO_REG(8, 0x3C) /* mode 8 */ #define CSDMAADR CSEQm_CIO_REG(8, 0x40) /* mode 8 */ #define CSDMACNT CSEQm_CIO_REG(8, 0x48) /* mode 8 */ #define CSEQDLCTL CSEQm_CIO_REG(8, 0x4D) #define DONELISTEND 0x10 #define DONELISTSIZE_MASK 0x0F #define DONELISTSIZE_8ELEM 0x01 #define DONELISTSIZE_16ELEM 0x02 #define DONELISTSIZE_32ELEM 0x03 #define DONELISTSIZE_64ELEM 0x04 #define DONELISTSIZE_128ELEM 0x05 #define DONELISTSIZE_256ELEM 0x06 #define DONELISTSIZE_512ELEM 0x07 #define DONELISTSIZE_1024ELEM 0x08 #define DONELISTSIZE_2048ELEM 0x09 #define DONELISTSIZE_4096ELEM 0x0A #define DONELISTSIZE_8192ELEM 0x0B #define DONELISTSIZE_16384ELEM 0x0C /* mode 8 */ #define CSEQDLOFFS CSEQm_CIO_REG(8, 0x4E) /* mode 11 */ #define CM11INTVEC0 CSEQm_CIO_REG(11, 0x50) /* mode 11 */ #define CM11INTVEC1 CSEQm_CIO_REG(11, 0x52) /* mode 11 */ #define CM11INTVEC2 CSEQm_CIO_REG(11, 0x54) #define CCONMSK (CSEQ_CIO_REG_BASE_ADR + 0x60) #define CCONEXIST (CSEQ_CIO_REG_BASE_ADR + 0x61) #define CCONMODE (CSEQ_CIO_REG_BASE_ADR + 0x62) #define CTIMERCALC (CSEQ_CIO_REG_BASE_ADR + 0x64) #define CINTDIS (CSEQ_CIO_REG_BASE_ADR + 0x68) /* mode 8, 32x32 bits, 128 bytes of mapped buffer */ #define CSBUFFER CSEQm_CIO_REG(8, 0x80) #define CSCRATCH (CSEQ_CIO_REG_BASE_ADR + 0x1C0) /* mode 0-8 */ #define CMnSCRATCH(Mode) CSEQm_CIO_REG(Mode, 0x1E0) /* * CSEQ Mapped Instruction RAM Page, Address Range : (0x0000-0x1FFC) */ #define CSEQ_RAM_REG_BASE_ADR 0xB8004000 /* * The common definitions below have the same address offset for all the Link * sequencers. */ #define MODECTL 0x40 #define DBGMODE 0x44 #define CONTROL 0x48 #define LEDTIMER 0x00010000 #define LEDTIMERS_10us 0x00000000 #define LEDTIMERS_1ms 0x00000800 #define LEDTIMERS_100ms 0x00001000 #define LEDMODE_TXRX 0x00000000 #define LEDMODE_CONNECTED 0x00000200 #define LEDPOL 0x00000100 #define LSEQRAM 0x1000 /* * LmSEQ Host Registers, Address Range : (0x0000-0x3FFC) */ #define LSEQ0_HOST_REG_BASE_ADR 0xB8020000 #define LSEQ1_HOST_REG_BASE_ADR 0xB8024000 #define LSEQ2_HOST_REG_BASE_ADR 0xB8028000 #define LSEQ3_HOST_REG_BASE_ADR 0xB802C000 #define LSEQ4_HOST_REG_BASE_ADR 0xB8030000 #define LSEQ5_HOST_REG_BASE_ADR 0xB8034000 #define LSEQ6_HOST_REG_BASE_ADR 0xB8038000 #define LSEQ7_HOST_REG_BASE_ADR 0xB803C000 #define LmARP2CTL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ ARP2CTL) #define LmARP2INT(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ ARP2INT) #define LmARP2INTEN(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ ARP2INTEN) #define LmDBGMODE(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ DBGMODE) #define LmCONTROL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ CONTROL) #define LmARP2BREAKADR01(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ ARP2BREAKADR01) #define LmARP2BREAKADR23(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ ARP2BREAKADR23) #define LmMODECTL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ MODECTL) #define LmAUTODISCI 0x08000000 #define LmDSBLBITLT 0x04000000 #define LmDSBLANTT 0x02000000 #define LmDSBLCRTT 0x01000000 #define LmDSBLCONT 0x00000100 #define LmPRIMODE 0x00000080 #define LmDSBLHOLD 0x00000040 #define LmDISACK 0x00000020 #define LmBLIND48 0x00000010 #define LmRCVMODE_MASK 0x0000000C #define LmRCVMODE_PLD 0x00000000 #define LmRCVMODE_HPC 0x00000004 #define LmDBGMODE(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ DBGMODE) #define LmFRCPERR 0x80000000 #define LmMEMSEL_MASK 0x30000000 #define LmFRCRBPERR 0x00000000 #define LmFRCTBPERR 0x10000000 #define LmFRCSGBPERR 0x20000000 #define LmFRCARBPERR 0x30000000 #define LmRCVIDW 0x00080000 #define LmINVDWERR 0x00040000 #define LmRCVDISP 0x00004000 #define LmDISPERR 0x00002000 #define LmDSBLDSCR 0x00000800 #define LmDSBLSCR 0x00000400 #define LmFRCNAK 0x00000200 #define LmFRCROFS 0x00000100 #define LmFRCCRC 0x00000080 #define LmFRMTYPE_MASK 0x00000070 #define LmSG_DATA 0x00000000 #define LmSG_COMMAND 0x00000010 #define LmSG_TASK 0x00000020 #define LmSG_TGTXFER 0x00000030 #define LmSG_RESPONSE 0x00000040 #define LmSG_IDENADDR 0x00000050 #define LmSG_OPENADDR 0x00000060 #define LmDISCRCGEN 0x00000008 #define LmDISCRCCHK 0x00000004 #define LmSSXMTFRM 0x00000002 #define LmSSRCVFRM 0x00000001 #define LmCONTROL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ CONTROL) #define LmSTEPXMTFRM 0x00000002 #define LmSTEPRCVFRM 0x00000001 #define LmBISTCTL0(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ BISTCTL0) #define ARBBISTEN 0x40000000 #define ARBBISTDN 0x20000000 /* ro */ #define ARBBISTFAIL 0x10000000 /* ro */ #define TBBISTEN 0x00000400 #define TBBISTDN 0x00000200 /* ro */ #define TBBISTFAIL 0x00000100 /* ro */ #define RBBISTEN 0x00000040 #define RBBISTDN 0x00000020 /* ro */ #define RBBISTFAIL 0x00000010 /* ro */ #define SGBISTEN 0x00000004 #define SGBISTDN 0x00000002 /* ro */ #define SGBISTFAIL 0x00000001 /* ro */ #define LmBISTCTL1(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ ((LinkNum)*LmSEQ_HOST_REG_SIZE) +\ BISTCTL1) #define LmRAMPAGE1 0x00000200 #define LmRAMPAGE0 0x00000100 #define LmIMEMBISTEN 0x00000040 #define LmIMEMBISTDN 0x00000020 /* ro */ #define LmIMEMBISTFAIL 0x00000010 /* ro */ #define LmSCRBISTEN 0x00000004 #define LmSCRBISTDN 0x00000002 /* ro */ #define LmSCRBISTFAIL 0x00000001 /* ro */ #define LmRAMPAGE (LmRAMPAGE1 + LmRAMPAGE0) #define LmRAMPAGE_LSHIFT 0x8 #define LmSCRATCH(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ ((LinkNum) * LmSEQ_HOST_REG_SIZE) +\ MAPPEDSCR) #define LmSEQRAM(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ ((LinkNum) * LmSEQ_HOST_REG_SIZE) +\ LSEQRAM) /* * LmSEQ CIO Bus Register, Address Range : (0x0000-0xFFC) * 8 modes, each mode is 512 bytes. * Unless specified, the register should valid for all modes. */ #define LmSEQ_CIOBUS_REG_BASE 0x2000 #define LmSEQ_PHY_BASE(Mode, LinkNum) \ (LSEQ0_HOST_REG_BASE_ADR + \ (LmSEQ_HOST_REG_SIZE * (u32) (LinkNum)) + \ LmSEQ_CIOBUS_REG_BASE + \ ((u32) (Mode) * LmSEQ_MODE_PAGE_SIZE)) #define LmSEQ_PHY_REG(Mode, LinkNum, Reg) \ (LmSEQ_PHY_BASE(Mode, LinkNum) + (u32) (Reg)) #define LmMODEPTR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, MODEPTR) #define LmALTMODE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALTMODE) #define LmATOMICXCHG(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ATOMICXCHG) #define LmFLAG(LinkNum) LmSEQ_PHY_REG(0, LinkNum, FLAG) #define LmARP2INTCTL(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ARP2INTCTL) #define LmSTACK(LinkNum) LmSEQ_PHY_REG(0, LinkNum, STACK) #define LmFUNCTION1(LinkNum) LmSEQ_PHY_REG(0, LinkNum, FUNCTION1) #define LmPRGMCNT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, PRGMCNT) #define LmACCUM(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ACCUM) #define LmSINDEX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SINDEX) #define LmDINDEX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DINDEX) #define LmALLONES(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALLONES) #define LmALLZEROS(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALLZEROS) #define LmSINDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SINDIR) #define LmDINDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DINDIR) #define LmJUMLDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, JUMLDIR) #define LmARP2HALTCODE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ARP2HALTCODE) #define LmCURRADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, CURRADDR) #define LmLASTADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, LASTADDR) #define LmNXTLADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, NXTLADDR) #define LmDBGPORTPTR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DBGPORTPTR) #define LmDBGPORT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DBGPORT) #define LmSCRATCHPAGE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SCRATCHPAGE) #define LmMnSCRATCHPAGE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, \ MnSCRATCHPAGE) #define LmTIMERCALC(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x28) #define LmREQMBX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x30) #define LmRSPMBX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x34) #define LmMnINT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x38) #define CTXMEMSIZE 0x80000000 /* ro */ #define LmACKREQ 0x08000000 #define LmNAKREQ 0x04000000 #define LmMnXMTERR 0x02000000 #define LmM5OOBSVC 0x01000000 #define LmHWTINT 0x00800000 #define LmMnCTXDONE 0x00100000 #define LmM2REQMBXF 0x00080000 #define LmM2RSPMBXE 0x00040000 #define LmMnDMAERR 0x00020000 #define LmRCVPRIM 0x00010000 #define LmRCVERR 0x00008000 #define LmADDRRCV 0x00004000 #define LmMnHDRMISS 0x00002000 #define LmMnWAITSCB 0x00001000 #define LmMnRLSSCB 0x00000800 #define LmMnSAVECTX 0x00000400 #define LmMnFETCHSG 0x00000200 #define LmMnLOADCTX 0x00000100 #define LmMnCFGICL 0x00000080 #define LmMnCFGSATA 0x00000040 #define LmMnCFGEXPSATA 0x00000020 #define LmMnCFGCMPLT 0x00000010 #define LmMnCFGRBUF 0x00000008 #define LmMnSAVETTR 0x00000004 #define LmMnCFGRDAT 0x00000002 #define LmMnCFGHDR 0x00000001 #define LmMnINTEN(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x3C) #define EN_LmACKREQ 0x08000000 #define EN_LmNAKREQ 0x04000000 #define EN_LmMnXMTERR 0x02000000 #define EN_LmM5OOBSVC 0x01000000 #define EN_LmHWTINT 0x00800000 #define EN_LmMnCTXDONE 0x00100000 #define EN_LmM2REQMBXF 0x00080000 #define EN_LmM2RSPMBXE 0x00040000 #define EN_LmMnDMAERR 0x00020000 #define EN_LmRCVPRIM 0x00010000 #define EN_LmRCVERR 0x00008000 #define EN_LmADDRRCV 0x00004000 #define EN_LmMnHDRMISS 0x00002000 #define EN_LmMnWAITSCB 0x00001000 #define EN_LmMnRLSSCB 0x00000800 #define EN_LmMnSAVECTX 0x00000400 #define EN_LmMnFETCHSG 0x00000200 #define EN_LmMnLOADCTX 0x00000100 #define EN_LmMnCFGICL 0x00000080 #define EN_LmMnCFGSATA 0x00000040 #define EN_LmMnCFGEXPSATA 0x00000020 #define EN_LmMnCFGCMPLT 0x00000010 #define EN_LmMnCFGRBUF 0x00000008 #define EN_LmMnSAVETTR 0x00000004 #define EN_LmMnCFGRDAT 0x00000002 #define EN_LmMnCFGHDR 0x00000001 #define LmM0INTEN_MASK (EN_LmMnCFGCMPLT | EN_LmMnCFGRBUF | \ EN_LmMnSAVETTR | EN_LmMnCFGRDAT | \ EN_LmMnCFGHDR | EN_LmRCVERR | \ EN_LmADDRRCV | EN_LmMnHDRMISS | \ EN_LmMnRLSSCB | EN_LmMnSAVECTX | \ EN_LmMnFETCHSG | EN_LmMnLOADCTX | \ EN_LmHWTINT | EN_LmMnCTXDONE | \ EN_LmRCVPRIM | EN_LmMnCFGSATA | \ EN_LmMnCFGEXPSATA | EN_LmMnDMAERR) #define LmM1INTEN_MASK (EN_LmMnCFGCMPLT | EN_LmADDRRCV | \ EN_LmMnRLSSCB | EN_LmMnSAVECTX | \ EN_LmMnFETCHSG | EN_LmMnLOADCTX | \ EN_LmMnXMTERR | EN_LmHWTINT | \ EN_LmMnCTXDONE | EN_LmRCVPRIM | \ EN_LmRCVERR | EN_LmMnDMAERR) #define LmM2INTEN_MASK (EN_LmADDRRCV | EN_LmHWTINT | \ EN_LmM2REQMBXF | EN_LmRCVPRIM | \ EN_LmRCVERR) #define LmM5INTEN_MASK (EN_LmADDRRCV | EN_LmM5OOBSVC | \ EN_LmHWTINT | EN_LmRCVPRIM | \ EN_LmRCVERR) #define LmXMTPRIMD(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x40) #define LmXMTPRIMCS(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x44) #define LmCONSTAT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x45) #define LmMnDMAERRS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x46) #define LmMnSGDMAERRS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x47) #define LmM0EXPHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x48) #define LmM1SASALIGN(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x48) #define SAS_ALIGN_DEFAULT 0xFF #define LmM0MSKHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x49) #define LmM1STPALIGN(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x49) #define STP_ALIGN_DEFAULT 0x1F #define LmM0RCVHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4A) #define LmM1XMTHDRP(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4A) #define LmM0ICLADR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4B) #define LmM1ALIGNMODE(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4B) #define LmDISALIGN 0x20 #define LmROTSTPALIGN 0x10 #define LmSTPALIGN 0x08 #define LmROTNOTIFY 0x04 #define LmDUALALIGN 0x02 #define LmROTALIGN 0x01 #define LmM0EXPRCVNT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4C) #define LmM1XMTCNT(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4C) #define LmMnBUFSTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x4E) #define LmMnBUFPERR 0x01 /* mode 0-1 */ #define LmMnXFRLVL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x59) #define LmMnXFRLVL_128 0x05 #define LmMnXFRLVL_256 0x04 #define LmMnXFRLVL_512 0x03 #define LmMnXFRLVL_1024 0x02 #define LmMnXFRLVL_1536 0x01 #define LmMnXFRLVL_2048 0x00 /* mode 0-1 */ #define LmMnSGDMACTL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5A) #define LmMnRESETSG 0x04 #define LmMnSTOPSG 0x02 #define LmMnSTARTSG 0x01 /* mode 0-1 */ #define LmMnSGDMASTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5B) /* mode 0-1 */ #define LmMnDDMACTL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5C) #define LmMnFLUSH 0x40 /* wo */ #define LmMnRLSRTRY 0x20 /* wo */ #define LmMnDISCARD 0x10 /* wo */ #define LmMnRESETDAT 0x08 /* wo */ #define LmMnSUSDAT 0x04 /* wo */ #define LmMnSTOPDAT 0x02 /* wo */ #define LmMnSTARTDAT 0x01 /* wo */ /* mode 0-1 */ #define LmMnDDMASTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5D) #define LmMnDPEMPTY 0x80 #define LmMnFLUSHING 0x40 #define LmMnDDMAREQ 0x20 #define LmMnHDMAREQ 0x10 #define LmMnDATFREE 0x08 #define LmMnDATSUS 0x04 #define LmMnDATACT 0x02 #define LmMnDATEN 0x01 /* mode 0-1 */ #define LmMnDDMAMODE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5E) #define LmMnDMATYPE_NORMAL 0x0000 #define LmMnDMATYPE_HOST_ONLY_TX 0x0001 #define LmMnDMATYPE_DEVICE_ONLY_TX 0x0002 #define LmMnDMATYPE_INVALID 0x0003 #define LmMnDMATYPE_MASK 0x0003 #define LmMnDMAWRAP 0x0004 #define LmMnBITBUCKET 0x0008 #define LmMnDISHDR 0x0010 #define LmMnSTPCRC 0x0020 #define LmXTEST 0x0040 #define LmMnDISCRC 0x0080 #define LmMnENINTLK 0x0100 #define LmMnADDRFRM 0x0400 #define LmMnENXMTCRC 0x0800 /* mode 0-1 */ #define LmMnXFRCNT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x70) /* mode 0-1 */ #define LmMnDPSEL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7B) #define LmMnDPSEL_MASK 0x07 #define LmMnEOLPRE 0x40 #define LmMnEOSPRE 0x80 /* Registers used in conjunction with LmMnDPSEL and LmMnDPACC registers */ /* Receive Mode n = 0 */ #define LmMnHRADDR 0x00 #define LmMnHBYTECNT 0x01 #define LmMnHREWIND 0x02 #define LmMnDWADDR 0x03 #define LmMnDSPACECNT 0x04 #define LmMnDFRMSIZE 0x05 /* Registers used in conjunction with LmMnDPSEL and LmMnDPACC registers */ /* Transmit Mode n = 1 */ #define LmMnHWADDR 0x00 #define LmMnHSPACECNT 0x01 /* #define LmMnHREWIND 0x02 */ #define LmMnDRADDR 0x03 #define LmMnDBYTECNT 0x04 /* #define LmMnDFRMSIZE 0x05 */ /* mode 0-1 */ #define LmMnDPACC(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x78) #define LmMnDPACC_MASK 0x00FFFFFF /* mode 0-1 */ #define LmMnHOLDLVL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7D) #define LmPRMSTAT0(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x80) #define LmPRMSTAT0BYTE0 0x80 #define LmPRMSTAT0BYTE1 0x81 #define LmPRMSTAT0BYTE2 0x82 #define LmPRMSTAT0BYTE3 0x83 #define LmFRAMERCVD 0x80000000 #define LmXFRRDYRCVD 0x40000000 #define LmUNKNOWNP 0x20000000 #define LmBREAK 0x10000000 #define LmDONE 0x08000000 #define LmOPENACPT 0x04000000 #define LmOPENRJCT 0x02000000 #define LmOPENRTRY 0x01000000 #define LmCLOSERV1 0x00800000 #define LmCLOSERV0 0x00400000 #define LmCLOSENORM 0x00200000 #define LmCLOSECLAF 0x00100000 #define LmNOTIFYRV2 0x00080000 #define LmNOTIFYRV1 0x00040000 #define LmNOTIFYRV0 0x00020000 #define LmNOTIFYSPIN 0x00010000 #define LmBROADRV4 0x00008000 #define LmBROADRV3 0x00004000 #define LmBROADRV2 0x00002000 #define LmBROADRV1 0x00001000 #define LmBROADSES 0x00000800 #define LmBROADRVCH1 0x00000400 #define LmBROADRVCH0 0x00000200 #define LmBROADCH 0x00000100 #define LmAIPRVWP 0x00000080 #define LmAIPWP 0x00000040 #define LmAIPWD 0x00000020 #define LmAIPWC 0x00000010 #define LmAIPRV2 0x00000008 #define LmAIPRV1 0x00000004 #define LmAIPRV0 0x00000002 #define LmAIPNRML 0x00000001 #define LmBROADCAST_MASK (LmBROADCH | LmBROADRVCH0 | \ LmBROADRVCH1) #define LmPRMSTAT1(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x84) #define LmPRMSTAT1BYTE0 0x84 #define LmPRMSTAT1BYTE1 0x85 #define LmPRMSTAT1BYTE2 0x86 #define LmPRMSTAT1BYTE3 0x87 #define LmFRMRCVDSTAT 0x80000000 #define LmBREAK_DET 0x04000000 #define LmCLOSE_DET 0x02000000 #define LmDONE_DET 0x01000000 #define LmXRDY 0x00040000 #define LmSYNCSRST 0x00020000 #define LmSYNC 0x00010000 #define LmXHOLD 0x00008000 #define LmRRDY 0x00004000 #define LmHOLD 0x00002000 #define LmROK 0x00001000 #define LmRIP 0x00000800 #define LmCRBLK 0x00000400 #define LmACK 0x00000200 #define LmNAK 0x00000100 #define LmHARDRST 0x00000080 #define LmERROR 0x00000040 #define LmRERR 0x00000020 #define LmPMREQP 0x00000010 #define LmPMREQS 0x00000008 #define LmPMACK 0x00000004 #define LmPMNAK 0x00000002 #define LmDMAT 0x00000001 /* mode 1 */ #define LmMnSATAFS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7E) #define LmMnXMTSIZE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x93) /* mode 0 */ #define LmMnFRMERR(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xB0) #define LmACRCERR 0x00000800 #define LmPHYOVRN 0x00000400 #define LmOBOVRN 0x00000200 #define LmMnZERODATA 0x00000100 #define LmSATAINTLK 0x00000080 #define LmMnCRCERR 0x00000020 #define LmRRDYOVRN 0x00000010 #define LmMISSSOAF 0x00000008 #define LmMISSSOF 0x00000004 #define LmMISSEOAF 0x00000002 #define LmMISSEOF 0x00000001 #define LmFRMERREN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xB4) #define EN_LmACRCERR 0x00000800 #define EN_LmPHYOVRN 0x00000400 #define EN_LmOBOVRN 0x00000200 #define EN_LmMnZERODATA 0x00000100 #define EN_LmSATAINTLK 0x00000080 #define EN_LmFRMBAD 0x00000040 #define EN_LmMnCRCERR 0x00000020 #define EN_LmRRDYOVRN 0x00000010 #define EN_LmMISSSOAF 0x00000008 #define EN_LmMISSSOF 0x00000004 #define EN_LmMISSEOAF 0x00000002 #define EN_LmMISSEOF 0x00000001 #define LmFRMERREN_MASK (EN_LmSATAINTLK | EN_LmMnCRCERR | \ EN_LmRRDYOVRN | EN_LmMISSSOF | \ EN_LmMISSEOAF | EN_LmMISSEOF | \ EN_LmACRCERR | LmPHYOVRN | \ EN_LmOBOVRN | EN_LmMnZERODATA) #define LmHWTSTATEN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xC5) #define EN_LmDONETO 0x80 #define EN_LmINVDISP 0x40 #define EN_LmINVDW 0x20 #define EN_LmDWSEVENT 0x08 #define EN_LmCRTTTO 0x04 #define EN_LmANTTTO 0x02 #define EN_LmBITLTTO 0x01 #define LmHWTSTATEN_MASK (EN_LmINVDISP | EN_LmINVDW | \ EN_LmDWSEVENT | EN_LmCRTTTO | \ EN_LmANTTTO | EN_LmDONETO | \ EN_LmBITLTTO) #define LmHWTSTAT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xC7) #define LmDONETO 0x80 #define LmINVDISP 0x40 #define LmINVDW 0x20 #define LmDWSEVENT 0x08 #define LmCRTTTO 0x04 #define LmANTTTO 0x02 #define LmBITLTTO 0x01 #define LmMnDATABUFADR(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xC8) #define LmDATABUFADR_MASK 0x0FFF #define LmMnDATABUF(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xCA) #define LmPRIMSTAT0EN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE0) #define EN_LmUNKNOWNP 0x20000000 #define EN_LmBREAK 0x10000000 #define EN_LmDONE 0x08000000 #define EN_LmOPENACPT 0x04000000 #define EN_LmOPENRJCT 0x02000000 #define EN_LmOPENRTRY 0x01000000 #define EN_LmCLOSERV1 0x00800000 #define EN_LmCLOSERV0 0x00400000 #define EN_LmCLOSENORM 0x00200000 #define EN_LmCLOSECLAF 0x00100000 #define EN_LmNOTIFYRV2 0x00080000 #define EN_LmNOTIFYRV1 0x00040000 #define EN_LmNOTIFYRV0 0x00020000 #define EN_LmNOTIFYSPIN 0x00010000 #define EN_LmBROADRV4 0x00008000 #define EN_LmBROADRV3 0x00004000 #define EN_LmBROADRV2 0x00002000 #define EN_LmBROADRV1 0x00001000 #define EN_LmBROADRV0 0x00000800 #define EN_LmBROADRVCH1 0x00000400 #define EN_LmBROADRVCH0 0x00000200 #define EN_LmBROADCH 0x00000100 #define EN_LmAIPRVWP 0x00000080 #define EN_LmAIPWP 0x00000040 #define EN_LmAIPWD 0x00000020 #define EN_LmAIPWC 0x00000010 #define EN_LmAIPRV2 0x00000008 #define EN_LmAIPRV1 0x00000004 #define EN_LmAIPRV0 0x00000002 #define EN_LmAIPNRML 0x00000001 #define LmPRIMSTAT0EN_MASK (EN_LmBREAK | \ EN_LmDONE | EN_LmOPENACPT | \ EN_LmOPENRJCT | EN_LmOPENRTRY | \ EN_LmCLOSERV1 | EN_LmCLOSERV0 | \ EN_LmCLOSENORM | EN_LmCLOSECLAF | \ EN_LmBROADRV4 | EN_LmBROADRV3 | \ EN_LmBROADRV2 | EN_LmBROADRV1 | \ EN_LmBROADRV0 | EN_LmBROADRVCH1 | \ EN_LmBROADRVCH0 | EN_LmBROADCH | \ EN_LmAIPRVWP | EN_LmAIPWP | \ EN_LmAIPWD | EN_LmAIPWC | \ EN_LmAIPRV2 | EN_LmAIPRV1 | \ EN_LmAIPRV0 | EN_LmAIPNRML) #define LmPRIMSTAT1EN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE4) #define EN_LmXRDY 0x00040000 #define EN_LmSYNCSRST 0x00020000 #define EN_LmSYNC 0x00010000 #define EN_LmXHOLD 0x00008000 #define EN_LmRRDY 0x00004000 #define EN_LmHOLD 0x00002000 #define EN_LmROK 0x00001000 #define EN_LmRIP 0x00000800 #define EN_LmCRBLK 0x00000400 #define EN_LmACK 0x00000200 #define EN_LmNAK 0x00000100 #define EN_LmHARDRST 0x00000080 #define EN_LmERROR 0x00000040 #define EN_LmRERR 0x00000020 #define EN_LmPMREQP 0x00000010 #define EN_LmPMREQS 0x00000008 #define EN_LmPMACK 0x00000004 #define EN_LmPMNAK 0x00000002 #define EN_LmDMAT 0x00000001 #define LmPRIMSTAT1EN_MASK (EN_LmHARDRST | \ EN_LmSYNCSRST | \ EN_LmPMREQP | EN_LmPMREQS | \ EN_LmPMACK | EN_LmPMNAK) #define LmSMSTATE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE8) #define LmSMSTATEBRK(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xEC) #define LmSMDBGCTL(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xF0) /* * LmSEQ CIO Bus Mode 3 Register. * Mode 3: Configuration and Setup, IOP Context SCB. */ #define LmM3SATATIMER(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x48) #define LmM3INTVEC0(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x90) #define LmM3INTVEC1(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x92) #define LmM3INTVEC2(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x94) #define LmM3INTVEC3(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x96) #define LmM3INTVEC4(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x98) #define LmM3INTVEC5(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9A) #define LmM3INTVEC6(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9C) #define LmM3INTVEC7(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9E) #define LmM3INTVEC8(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xA4) #define LmM3INTVEC9(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xA6) #define LmM3INTVEC10(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xB0) #define LmM3FRMGAP(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xB4) #define LmBITL_TIMER(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xA2) #define LmWWN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xA8) /* * LmSEQ CIO Bus Mode 5 Registers. * Mode 5: Phy/OOB Control and Status. */ #define LmSEQ_OOB_REG(phy_id, reg) LmSEQ_PHY_REG(5, (phy_id), (reg)) #define OOB_BFLTR 0x100 #define BFLTR_THR_MASK 0xF0 #define BFLTR_TC_MASK 0x0F #define OOB_INIT_MIN 0x102 #define OOB_INIT_MAX 0x104 #define OOB_INIT_NEG 0x106 #define OOB_SAS_MIN 0x108 #define OOB_SAS_MAX 0x10A #define OOB_SAS_NEG 0x10C #define OOB_WAKE_MIN 0x10E #define OOB_WAKE_MAX 0x110 #define OOB_WAKE_NEG 0x112 #define OOB_IDLE_MAX 0x114 #define OOB_BURST_MAX 0x116 #define OOB_DATA_KBITS 0x126 #define OOB_ALIGN_0_DATA 0x12C #define OOB_ALIGN_1_DATA 0x130 #define D10_2_DATA_k 0x00 #define SYNC_DATA_k 0x02 #define ALIGN_1_DATA_k 0x04 #define ALIGN_0_DATA_k 0x08 #define BURST_DATA_k 0x10 #define OOB_PHY_RESET_COUNT 0x13C #define OOB_SIG_GEN 0x140 #define START_OOB 0x80 #define START_DWS 0x40 #define ALIGN_CNT3 0x30 #define ALIGN_CNT2 0x20 #define ALIGN_CNT1 0x10 #define ALIGN_CNT4 0x00 #define STOP_DWS 0x08 #define SEND_COMSAS 0x04 #define SEND_COMINIT 0x02 #define SEND_COMWAKE 0x01 #define OOB_XMIT 0x141 #define TX_ENABLE 0x80 #define XMIT_OOB_BURST 0x10 #define XMIT_D10_2 0x08 #define XMIT_SYNC 0x04 #define XMIT_ALIGN_1 0x02 #define XMIT_ALIGN_0 0x01 #define FUNCTION_MASK 0x142 #define SAS_MODE_DIS 0x80 #define SATA_MODE_DIS 0x40 #define SPINUP_HOLD_DIS 0x20 #define HOT_PLUG_DIS 0x10 #define SATA_PS_DIS 0x08 #define FUNCTION_MASK_DEFAULT (SPINUP_HOLD_DIS | SATA_PS_DIS) #define OOB_MODE 0x143 #define SAS_MODE 0x80 #define SATA_MODE 0x40 #define SLOW_CLK 0x20 #define FORCE_XMIT_15 0x08 #define PHY_SPEED_60 0x04 #define PHY_SPEED_30 0x02 #define PHY_SPEED_15 0x01 #define CURRENT_STATUS 0x144 #define CURRENT_OOB_DONE 0x80 #define CURRENT_LOSS_OF_SIGNAL 0x40 #define CURRENT_SPINUP_HOLD 0x20 #define CURRENT_HOT_PLUG_CNCT 0x10 #define CURRENT_GTO_TIMEOUT 0x08 #define CURRENT_OOB_TIMEOUT 0x04 #define CURRENT_DEVICE_PRESENT 0x02 #define CURRENT_OOB_ERROR 0x01 #define CURRENT_OOB1_ERROR (CURRENT_HOT_PLUG_CNCT | \ CURRENT_GTO_TIMEOUT) #define CURRENT_OOB2_ERROR (CURRENT_HOT_PLUG_CNCT | \ CURRENT_OOB_ERROR) #define DEVICE_ADDED_W_CNT (CURRENT_OOB_DONE | \ CURRENT_HOT_PLUG_CNCT | \ CURRENT_DEVICE_PRESENT) #define DEVICE_ADDED_WO_CNT (CURRENT_OOB_DONE | \ CURRENT_DEVICE_PRESENT) #define DEVICE_REMOVED CURRENT_LOSS_OF_SIGNAL #define CURRENT_PHY_MASK (CURRENT_OOB_DONE | \ CURRENT_LOSS_OF_SIGNAL | \ CURRENT_SPINUP_HOLD | \ CURRENT_HOT_PLUG_CNCT | \ CURRENT_GTO_TIMEOUT | \ CURRENT_DEVICE_PRESENT | \ CURRENT_OOB_ERROR ) #define CURRENT_ERR_MASK (CURRENT_LOSS_OF_SIGNAL | \ CURRENT_GTO_TIMEOUT | \ CURRENT_OOB_TIMEOUT | \ CURRENT_OOB_ERROR ) #define SPEED_MASK 0x145 #define SATA_SPEED_30_DIS 0x10 #define SATA_SPEED_15_DIS 0x08 #define SAS_SPEED_60_DIS 0x04 #define SAS_SPEED_30_DIS 0x02 #define SAS_SPEED_15_DIS 0x01 #define SAS_SPEED_MASK_DEFAULT 0x00 #define OOB_TIMER_ENABLE 0x14D #define HOT_PLUG_EN 0x80 #define RCD_EN 0x40 #define COMTIMER_EN 0x20 #define SNTT_EN 0x10 #define SNLT_EN 0x04 #define SNWT_EN 0x02 #define ALIGN_EN 0x01 #define OOB_STATUS 0x14E #define OOB_DONE 0x80 #define LOSS_OF_SIGNAL 0x40 /* ro */ #define SPINUP_HOLD 0x20 #define HOT_PLUG_CNCT 0x10 /* ro */ #define GTO_TIMEOUT 0x08 /* ro */ #define OOB_TIMEOUT 0x04 /* ro */ #define DEVICE_PRESENT 0x02 /* ro */ #define OOB_ERROR 0x01 /* ro */ #define OOB_STATUS_ERROR_MASK (LOSS_OF_SIGNAL | GTO_TIMEOUT | \ OOB_TIMEOUT | OOB_ERROR) #define OOB_STATUS_CLEAR 0x14F #define OOB_DONE_CLR 0x80 #define LOSS_OF_SIGNAL_CLR 0x40 #define SPINUP_HOLD_CLR 0x20 #define HOT_PLUG_CNCT_CLR 0x10 #define GTO_TIMEOUT_CLR 0x08 #define OOB_TIMEOUT_CLR 0x04 #define OOB_ERROR_CLR 0x01 #define HOT_PLUG_DELAY 0x150 /* In 5 ms units. 20 = 100 ms. */ #define HOTPLUG_DELAY_TIMEOUT 20 #define INT_ENABLE_2 0x15A #define OOB_DONE_EN 0x80 #define LOSS_OF_SIGNAL_EN 0x40 #define SPINUP_HOLD_EN 0x20 #define HOT_PLUG_CNCT_EN 0x10 #define GTO_TIMEOUT_EN 0x08 #define OOB_TIMEOUT_EN 0x04 #define DEVICE_PRESENT_EN 0x02 #define OOB_ERROR_EN 0x01 #define PHY_CONTROL_0 0x160 #define PHY_LOWPWREN_TX 0x80 #define PHY_LOWPWREN_RX 0x40 #define SPARE_REG_160_B5 0x20 #define OFFSET_CANCEL_RX 0x10 /* bits 3:2 */ #define PHY_RXCOMCENTER_60V 0x00 #define PHY_RXCOMCENTER_70V 0x04 #define PHY_RXCOMCENTER_80V 0x08 #define PHY_RXCOMCENTER_90V 0x0C #define PHY_RXCOMCENTER_MASK 0x0C #define PHY_RESET 0x02 #define SAS_DEFAULT_SEL 0x01 #define PHY_CONTROL_1 0x161 /* bits 2:0 */ #define SATA_PHY_DETLEVEL_50mv 0x00 #define SATA_PHY_DETLEVEL_75mv 0x01 #define SATA_PHY_DETLEVEL_100mv 0x02 #define SATA_PHY_DETLEVEL_125mv 0x03 #define SATA_PHY_DETLEVEL_150mv 0x04 #define SATA_PHY_DETLEVEL_175mv 0x05 #define SATA_PHY_DETLEVEL_200mv 0x06 #define SATA_PHY_DETLEVEL_225mv 0x07 #define SATA_PHY_DETLEVEL_MASK 0x07 /* bits 5:3 */ #define SAS_PHY_DETLEVEL_50mv 0x00 #define SAS_PHY_DETLEVEL_75mv 0x08 #define SAS_PHY_DETLEVEL_100mv 0x10 #define SAS_PHY_DETLEVEL_125mv 0x11 #define SAS_PHY_DETLEVEL_150mv 0x20 #define SAS_PHY_DETLEVEL_175mv 0x21 #define SAS_PHY_DETLEVEL_200mv 0x30 #define SAS_PHY_DETLEVEL_225mv 0x31 #define SAS_PHY_DETLEVEL_MASK 0x38 #define PHY_CONTROL_2 0x162 /* bits 7:5 */ #define SATA_PHY_DRV_400mv 0x00 #define SATA_PHY_DRV_450mv 0x20 #define SATA_PHY_DRV_500mv 0x40 #define SATA_PHY_DRV_550mv 0x60 #define SATA_PHY_DRV_600mv 0x80 #define SATA_PHY_DRV_650mv 0xA0 #define SATA_PHY_DRV_725mv 0xC0 #define SATA_PHY_DRV_800mv 0xE0 #define SATA_PHY_DRV_MASK 0xE0 /* bits 4:3 */ #define SATA_PREEMP_0 0x00 #define SATA_PREEMP_1 0x08 #define SATA_PREEMP_2 0x10 #define SATA_PREEMP_3 0x18 #define SATA_PREEMP_MASK 0x18 #define SATA_CMSH1P5 0x04 /* bits 1:0 */ #define SATA_SLEW_0 0x00 #define SATA_SLEW_1 0x01 #define SATA_SLEW_2 0x02 #define SATA_SLEW_3 0x03 #define SATA_SLEW_MASK 0x03 #define PHY_CONTROL_3 0x163 /* bits 7:5 */ #define SAS_PHY_DRV_400mv 0x00 #define SAS_PHY_DRV_450mv 0x20 #define SAS_PHY_DRV_500mv 0x40 #define SAS_PHY_DRV_550mv 0x60 #define SAS_PHY_DRV_600mv 0x80 #define SAS_PHY_DRV_650mv 0xA0 #define SAS_PHY_DRV_725mv 0xC0 #define SAS_PHY_DRV_800mv 0xE0 #define SAS_PHY_DRV_MASK 0xE0 /* bits 4:3 */ #define SAS_PREEMP_0 0x00 #define SAS_PREEMP_1 0x08 #define SAS_PREEMP_2 0x10 #define SAS_PREEMP_3 0x18 #define SAS_PREEMP_MASK 0x18 #define SAS_CMSH1P5 0x04 /* bits 1:0 */ #define SAS_SLEW_0 0x00 #define SAS_SLEW_1 0x01 #define SAS_SLEW_2 0x02 #define SAS_SLEW_3 0x03 #define SAS_SLEW_MASK 0x03 #define PHY_CONTROL_4 0x168 #define PHY_DONE_CAL_TX 0x80 #define PHY_DONE_CAL_RX 0x40 #define RX_TERM_LOAD_DIS 0x20 #define TX_TERM_LOAD_DIS 0x10 #define AUTO_TERM_CAL_DIS 0x08 #define PHY_SIGDET_FLTR_EN 0x04 #define OSC_FREQ 0x02 #define PHY_START_CAL 0x01 /* * HST_PCIX2 Registers, Address Range: (0x00-0xFC) */ #define PCIX_REG_BASE_ADR 0xB8040000 #define PCIC_VENDOR_ID 0x00 #define PCIC_DEVICE_ID 0x02 #define PCIC_COMMAND 0x04 #define INT_DIS 0x0400 #define FBB_EN 0x0200 /* ro */ #define SERR_EN 0x0100 #define STEP_EN 0x0080 /* ro */ #define PERR_EN 0x0040 #define VGA_EN 0x0020 /* ro */ #define MWI_EN 0x0010 #define SPC_EN 0x0008 #define MST_EN 0x0004 #define MEM_EN 0x0002 #define IO_EN 0x0001 #define PCIC_STATUS 0x06 #define PERR_DET 0x8000 #define SERR_GEN 0x4000 #define MABT_DET 0x2000 #define TABT_DET 0x1000 #define TABT_GEN 0x0800 #define DPERR_DET 0x0100 #define CAP_LIST 0x0010 #define INT_STAT 0x0008 #define PCIC_DEVREV_ID 0x08 #define PCIC_CLASS_CODE 0x09 #define PCIC_CACHELINE_SIZE 0x0C #define PCIC_MBAR0 0x10 #define PCIC_MBAR0_OFFSET 0 #define PCIC_MBAR1 0x18 #define PCIC_MBAR1_OFFSET 2 #define PCIC_IOBAR 0x20 #define PCIC_IOBAR_OFFSET 4 #define PCIC_SUBVENDOR_ID 0x2C #define PCIC_SUBSYTEM_ID 0x2E #define PCIX_STATUS 0x44 #define RCV_SCE 0x20000000 #define UNEXP_SC 0x00080000 #define SC_DISCARD 0x00040000 #define ECC_CTRL_STAT 0x48 #define UNCOR_ECCERR 0x00000008 #define PCIC_PM_CSR 0x5C #define PWR_STATE_D0 0 #define PWR_STATE_D1 1 /* not supported */ #define PWR_STATE_D2 2 /* not supported */ #define PWR_STATE_D3 3 #define PCIC_BASE1 0x6C /* internal use only */ #define BASE1_RSVD 0xFFFFFFF8 #define PCIC_BASEA 0x70 /* internal use only */ #define BASEA_RSVD 0xFFFFFFC0 #define BASEA_START 0 #define PCIC_BASEB 0x74 /* internal use only */ #define BASEB_RSVD 0xFFFFFF80 #define BASEB_IOMAP_MASK 0x7F #define BASEB_START 0x80 #define PCIC_BASEC 0x78 /* internal use only */ #define BASEC_RSVD 0xFFFFFFFC #define BASEC_MASK 0x03 #define BASEC_START 0x58 #define PCIC_MBAR_KEY 0x7C /* internal use only */ #define MBAR_KEY_MASK 0xFFFFFFFF #define PCIC_HSTPCIX_CNTRL 0xA0 #define REWIND_DIS 0x0800 #define SC_TMR_DIS 0x04000000 #define PCIC_MBAR0_MASK 0xA8 #define PCIC_MBAR0_SIZE_MASK 0x1FFFE000 #define PCIC_MBAR0_SIZE_SHIFT 13 #define PCIC_MBAR0_SIZE(val) \ (((val) & PCIC_MBAR0_SIZE_MASK) >> PCIC_MBAR0_SIZE_SHIFT) #define PCIC_FLASH_MBAR 0xB8 #define PCIC_INTRPT_STAT 0xD4 #define PCIC_TP_CTRL 0xFC /* * EXSI Registers, Address Range: (0x00-0xFC) */ #define EXSI_REG_BASE_ADR REG_BASE_ADDR_EXSI #define EXSICNFGR (EXSI_REG_BASE_ADR + 0x00) #define OCMINITIALIZED 0x80000000 #define ASIEN 0x00400000 #define HCMODE 0x00200000 #define PCIDEF 0x00100000 #define COMSTOCK 0x00080000 #define SEEPROMEND 0x00040000 #define MSTTIMEN 0x00020000 #define XREGEX 0x00000200 #define NVRAMW 0x00000100 #define NVRAMEX 0x00000080 #define SRAMW 0x00000040 #define SRAMEX 0x00000020 #define FLASHW 0x00000010 #define FLASHEX 0x00000008 #define SEEPROMCFG 0x00000004 #define SEEPROMTYP 0x00000002 #define SEEPROMEX 0x00000001 #define EXSICNTRLR (EXSI_REG_BASE_ADR + 0x04) #define MODINT_EN 0x00000001 #define PMSTATR (EXSI_REG_BASE_ADR + 0x10) #define FLASHRST 0x00000002 #define FLASHRDY 0x00000001 #define FLCNFGR (EXSI_REG_BASE_ADR + 0x14) #define FLWEH_MASK 0x30000000 #define FLWESU_MASK 0x0C000000 #define FLWEPW_MASK 0x03F00000 #define FLOEH_MASK 0x000C0000 #define FLOESU_MASK 0x00030000 #define FLOEPW_MASK 0x0000FC00 #define FLCSH_MASK 0x00000300 #define FLCSSU_MASK 0x000000C0 #define FLCSPW_MASK 0x0000003F #define SRCNFGR (EXSI_REG_BASE_ADR + 0x18) #define SRWEH_MASK 0x30000000 #define SRWESU_MASK 0x0C000000 #define SRWEPW_MASK 0x03F00000 #define SROEH_MASK 0x000C0000 #define SROESU_MASK 0x00030000 #define SROEPW_MASK 0x0000FC00 #define SRCSH_MASK 0x00000300 #define SRCSSU_MASK 0x000000C0 #define SRCSPW_MASK 0x0000003F #define NVCNFGR (EXSI_REG_BASE_ADR + 0x1C) #define NVWEH_MASK 0x30000000 #define NVWESU_MASK 0x0C000000 #define NVWEPW_MASK 0x03F00000 #define NVOEH_MASK 0x000C0000 #define NVOESU_MASK 0x00030000 #define NVOEPW_MASK 0x0000FC00 #define NVCSH_MASK 0x00000300 #define NVCSSU_MASK 0x000000C0 #define NVCSPW_MASK 0x0000003F #define XRCNFGR (EXSI_REG_BASE_ADR + 0x20) #define XRWEH_MASK 0x30000000 #define XRWESU_MASK 0x0C000000 #define XRWEPW_MASK 0x03F00000 #define XROEH_MASK 0x000C0000 #define XROESU_MASK 0x00030000 #define XROEPW_MASK 0x0000FC00 #define XRCSH_MASK 0x00000300 #define XRCSSU_MASK 0x000000C0 #define XRCSPW_MASK 0x0000003F #define XREGADDR (EXSI_REG_BASE_ADR + 0x24) #define XRADDRINCEN 0x80000000 #define XREGADD_MASK 0x007FFFFF #define XREGDATAR (EXSI_REG_BASE_ADR + 0x28) #define XREGDATA_MASK 0x0000FFFF #define GPIOOER (EXSI_REG_BASE_ADR + 0x40) #define GPIOODENR (EXSI_REG_BASE_ADR + 0x44) #define GPIOINVR (EXSI_REG_BASE_ADR + 0x48) #define GPIODATAOR (EXSI_REG_BASE_ADR + 0x4C) #define GPIODATAIR (EXSI_REG_BASE_ADR + 0x50) #define GPIOCNFGR (EXSI_REG_BASE_ADR + 0x54) #define GPIO_EXTSRC 0x00000001 #define SCNTRLR (EXSI_REG_BASE_ADR + 0xA0) #define SXFERDONE 0x00000100 #define SXFERCNT_MASK 0x000000E0 #define SCMDTYP_MASK 0x0000001C #define SXFERSTART 0x00000002 #define SXFEREN 0x00000001 #define SRATER (EXSI_REG_BASE_ADR + 0xA4) #define SADDRR (EXSI_REG_BASE_ADR + 0xA8) #define SADDR_MASK 0x0000FFFF #define SDATAOR (EXSI_REG_BASE_ADR + 0xAC) #define SDATAOR0 (EXSI_REG_BASE_ADR + 0xAC) #define SDATAOR1 (EXSI_REG_BASE_ADR + 0xAD) #define SDATAOR2 (EXSI_REG_BASE_ADR + 0xAE) #define SDATAOR3 (EXSI_REG_BASE_ADR + 0xAF) #define SDATAIR (EXSI_REG_BASE_ADR + 0xB0) #define SDATAIR0 (EXSI_REG_BASE_ADR + 0xB0) #define SDATAIR1 (EXSI_REG_BASE_ADR + 0xB1) #define SDATAIR2 (EXSI_REG_BASE_ADR + 0xB2) #define SDATAIR3 (EXSI_REG_BASE_ADR + 0xB3) #define ASISTAT0R (EXSI_REG_BASE_ADR + 0xD0) #define ASIFMTERR 0x00000400 #define ASISEECHKERR 0x00000200 #define ASIERR 0x00000100 #define ASISTAT1R (EXSI_REG_BASE_ADR + 0xD4) #define CHECKSUM_MASK 0x0000FFFF #define ASIERRADDR (EXSI_REG_BASE_ADR + 0xD8) #define ASIERRDATAR (EXSI_REG_BASE_ADR + 0xDC) #define ASIERRSTATR (EXSI_REG_BASE_ADR + 0xE0) #define CPI2ASIBYTECNT_MASK 0x00070000 #define CPI2ASIBYTEEN_MASK 0x0000F000 #define CPI2ASITARGERR_MASK 0x00000F00 #define CPI2ASITARGMID_MASK 0x000000F0 #define CPI2ASIMSTERR_MASK 0x0000000F /* * XSRAM, External SRAM (DWord and any BE pattern accessible) */ #define XSRAM_REG_BASE_ADDR 0xB8100000 #define XSRAM_SIZE 0x100000 /* * NVRAM Registers, Address Range: (0x00000 - 0x3FFFF). */ #define NVRAM_REG_BASE_ADR 0xBF800000 #define NVRAM_MAX_BASE_ADR 0x003FFFFF /* OCM base address */ #define OCM_BASE_ADDR 0xA0000000 #define OCM_MAX_SIZE 0x20000 /* * Sequencers (Central and Link) Scratch RAM page definitions. */ /* * The Central Management Sequencer (CSEQ) Scratch Memory is a 1024 * byte memory. It is dword accessible and has byte parity * protection. The CSEQ accesses it in 32 byte windows, either as mode * dependent or mode independent memory. Each mode has 96 bytes, * (three 32 byte pages 0-2, not contiguous), leaving 128 bytes of * Mode Independent memory (four 32 byte pages 3-7). Note that mode * dependent scratch memory, Mode 8, page 0-3 overlaps mode * independent scratch memory, pages 0-3. * - 896 bytes of mode dependent scratch, 96 bytes per Modes 0-7, and * 128 bytes in mode 8, * - 259 bytes of mode independent scratch, common to modes 0-15. * * Sequencer scratch RAM is 1024 bytes. This scratch memory is * divided into mode dependent and mode independent scratch with this * memory further subdivided into pages of size 32 bytes. There are 5 * pages (160 bytes) of mode independent scratch and 3 pages of * dependent scratch memory for modes 0-7 (768 bytes). Mode 8 pages * 0-2 dependent scratch overlap with pages 0-2 of mode independent * scratch memory. * * The host accesses this scratch in a different manner from the * central sequencer. The sequencer has to use CSEQ registers CSCRPAGE * and CMnSCRPAGE to access the scratch memory. A flat mapping of the * scratch memory is available for software convenience and to prevent * corruption while the sequencer is running. This memory is mapped * onto addresses 800h - BFFh, total of 400h bytes. * * These addresses are mapped as follows: * * 800h-83Fh Mode Dependent Scratch Mode 0 Pages 0-1 * 840h-87Fh Mode Dependent Scratch Mode 1 Pages 0-1 * 880h-8BFh Mode Dependent Scratch Mode 2 Pages 0-1 * 8C0h-8FFh Mode Dependent Scratch Mode 3 Pages 0-1 * 900h-93Fh Mode Dependent Scratch Mode 4 Pages 0-1 * 940h-97Fh Mode Dependent Scratch Mode 5 Pages 0-1 * 980h-9BFh Mode Dependent Scratch Mode 6 Pages 0-1 * 9C0h-9FFh Mode Dependent Scratch Mode 7 Pages 0-1 * A00h-A5Fh Mode Dependent Scratch Mode 8 Pages 0-2 * Mode Independent Scratch Pages 0-2 * A60h-A7Fh Mode Dependent Scratch Mode 8 Page 3 * Mode Independent Scratch Page 3 * A80h-AFFh Mode Independent Scratch Pages 4-7 * B00h-B1Fh Mode Dependent Scratch Mode 0 Page 2 * B20h-B3Fh Mode Dependent Scratch Mode 1 Page 2 * B40h-B5Fh Mode Dependent Scratch Mode 2 Page 2 * B60h-B7Fh Mode Dependent Scratch Mode 3 Page 2 * B80h-B9Fh Mode Dependent Scratch Mode 4 Page 2 * BA0h-BBFh Mode Dependent Scratch Mode 5 Page 2 * BC0h-BDFh Mode Dependent Scratch Mode 6 Page 2 * BE0h-BFFh Mode Dependent Scratch Mode 7 Page 2 */ /* General macros */ #define CSEQ_PAGE_SIZE 32 /* Scratch page size (in bytes) */ /* All macros start with offsets from base + 0x800 (CMAPPEDSCR). * Mode dependent scratch page 0, mode 0. * For modes 1-7 you have to do arithmetic. */ #define CSEQ_LRM_SAVE_SINDEX (CMAPPEDSCR + 0x0000) #define CSEQ_LRM_SAVE_SCBPTR (CMAPPEDSCR + 0x0002) #define CSEQ_Q_LINK_HEAD (CMAPPEDSCR + 0x0004) #define CSEQ_Q_LINK_TAIL (CMAPPEDSCR + 0x0006) #define CSEQ_LRM_SAVE_SCRPAGE (CMAPPEDSCR + 0x0008) /* Mode dependent scratch page 0 mode 8 macros. */ #define CSEQ_RET_ADDR (CMAPPEDSCR + 0x0200) #define CSEQ_RET_SCBPTR (CMAPPEDSCR + 0x0202) #define CSEQ_SAVE_SCBPTR (CMAPPEDSCR + 0x0204) #define CSEQ_EMPTY_TRANS_CTX (CMAPPEDSCR + 0x0206) #define CSEQ_RESP_LEN (CMAPPEDSCR + 0x0208) #define CSEQ_TMF_SCBPTR (CMAPPEDSCR + 0x020A) #define CSEQ_GLOBAL_PREV_SCB (CMAPPEDSCR + 0x020C) #define CSEQ_GLOBAL_HEAD (CMAPPEDSCR + 0x020E) #define CSEQ_CLEAR_LU_HEAD (CMAPPEDSCR + 0x0210) #define CSEQ_TMF_OPCODE (CMAPPEDSCR + 0x0212) #define CSEQ_SCRATCH_FLAGS (CMAPPEDSCR + 0x0213) #define CSEQ_HSB_SITE (CMAPPEDSCR + 0x021A) #define CSEQ_FIRST_INV_SCB_SITE (CMAPPEDSCR + 0x021C) #define CSEQ_FIRST_INV_DDB_SITE (CMAPPEDSCR + 0x021E) /* Mode dependent scratch page 1 mode 8 macros. */ #define CSEQ_LUN_TO_CLEAR (CMAPPEDSCR + 0x0220) #define CSEQ_LUN_TO_CHECK (CMAPPEDSCR + 0x0228) /* Mode dependent scratch page 2 mode 8 macros */ #define CSEQ_HQ_NEW_POINTER (CMAPPEDSCR + 0x0240) #define CSEQ_HQ_DONE_BASE (CMAPPEDSCR + 0x0248) #define CSEQ_HQ_DONE_POINTER (CMAPPEDSCR + 0x0250) #define CSEQ_HQ_DONE_PASS (CMAPPEDSCR + 0x0254) /* Mode independent scratch page 4 macros. */ #define CSEQ_Q_EXE_HEAD (CMAPPEDSCR + 0x0280) #define CSEQ_Q_EXE_TAIL (CMAPPEDSCR + 0x0282) #define CSEQ_Q_DONE_HEAD (CMAPPEDSCR + 0x0284) #define CSEQ_Q_DONE_TAIL (CMAPPEDSCR + 0x0286) #define CSEQ_Q_SEND_HEAD (CMAPPEDSCR + 0x0288) #define CSEQ_Q_SEND_TAIL (CMAPPEDSCR + 0x028A) #define CSEQ_Q_DMA2CHIM_HEAD (CMAPPEDSCR + 0x028C) #define CSEQ_Q_DMA2CHIM_TAIL (CMAPPEDSCR + 0x028E) #define CSEQ_Q_COPY_HEAD (CMAPPEDSCR + 0x0290) #define CSEQ_Q_COPY_TAIL (CMAPPEDSCR + 0x0292) #define CSEQ_REG0 (CMAPPEDSCR + 0x0294) #define CSEQ_REG1 (CMAPPEDSCR + 0x0296) #define CSEQ_REG2 (CMAPPEDSCR + 0x0298) #define CSEQ_LINK_CTL_Q_MAP (CMAPPEDSCR + 0x029C) #define CSEQ_MAX_CSEQ_MODE (CMAPPEDSCR + 0x029D) #define CSEQ_FREE_LIST_HACK_COUNT (CMAPPEDSCR + 0x029E) /* Mode independent scratch page 5 macros. */ #define CSEQ_EST_NEXUS_REQ_QUEUE (CMAPPEDSCR + 0x02A0) #define CSEQ_EST_NEXUS_REQ_COUNT (CMAPPEDSCR + 0x02A8) #define CSEQ_Q_EST_NEXUS_HEAD (CMAPPEDSCR + 0x02B0) #define CSEQ_Q_EST_NEXUS_TAIL (CMAPPEDSCR + 0x02B2) #define CSEQ_NEED_EST_NEXUS_SCB (CMAPPEDSCR + 0x02B4) #define CSEQ_EST_NEXUS_REQ_HEAD (CMAPPEDSCR + 0x02B6) #define CSEQ_EST_NEXUS_REQ_TAIL (CMAPPEDSCR + 0x02B7) #define CSEQ_EST_NEXUS_SCB_OFFSET (CMAPPEDSCR + 0x02B8) /* Mode independent scratch page 6 macros. */ #define CSEQ_INT_ROUT_RET_ADDR0 (CMAPPEDSCR + 0x02C0) #define CSEQ_INT_ROUT_RET_ADDR1 (CMAPPEDSCR + 0x02C2) #define CSEQ_INT_ROUT_SCBPTR (CMAPPEDSCR + 0x02C4) #define CSEQ_INT_ROUT_MODE (CMAPPEDSCR + 0x02C6) #define CSEQ_ISR_SCRATCH_FLAGS (CMAPPEDSCR + 0x02C7) #define CSEQ_ISR_SAVE_SINDEX (CMAPPEDSCR + 0x02C8) #define CSEQ_ISR_SAVE_DINDEX (CMAPPEDSCR + 0x02CA) #define CSEQ_Q_MONIRTT_HEAD (CMAPPEDSCR + 0x02D0) #define CSEQ_Q_MONIRTT_TAIL (CMAPPEDSCR + 0x02D2) #define CSEQ_FREE_SCB_MASK (CMAPPEDSCR + 0x02D5) #define CSEQ_BUILTIN_FREE_SCB_HEAD (CMAPPEDSCR + 0x02D6) #define CSEQ_BUILTIN_FREE_SCB_TAIL (CMAPPEDSCR + 0x02D8) #define CSEQ_EXTENDED_FREE_SCB_HEAD (CMAPPEDSCR + 0x02DA) #define CSEQ_EXTENDED_FREE_SCB_TAIL (CMAPPEDSCR + 0x02DC) /* Mode independent scratch page 7 macros. */ #define CSEQ_EMPTY_REQ_QUEUE (CMAPPEDSCR + 0x02E0) #define CSEQ_EMPTY_REQ_COUNT (CMAPPEDSCR + 0x02E8) #define CSEQ_Q_EMPTY_HEAD (CMAPPEDSCR + 0x02F0) #define CSEQ_Q_EMPTY_TAIL (CMAPPEDSCR + 0x02F2) #define CSEQ_NEED_EMPTY_SCB (CMAPPEDSCR + 0x02F4) #define CSEQ_EMPTY_REQ_HEAD (CMAPPEDSCR + 0x02F6) #define CSEQ_EMPTY_REQ_TAIL (CMAPPEDSCR + 0x02F7) #define CSEQ_EMPTY_SCB_OFFSET (CMAPPEDSCR + 0x02F8) #define CSEQ_PRIMITIVE_DATA (CMAPPEDSCR + 0x02FA) #define CSEQ_TIMEOUT_CONST (CMAPPEDSCR + 0x02FC) /*************************************************************************** * Link m Sequencer scratch RAM is 512 bytes. * This scratch memory is divided into mode dependent and mode * independent scratch with this memory further subdivided into * pages of size 32 bytes. There are 4 pages (128 bytes) of * mode independent scratch and 4 pages of dependent scratch * memory for modes 0-2 (384 bytes). * * The host accesses this scratch in a different manner from the * link sequencer. The sequencer has to use LSEQ registers * LmSCRPAGE and LmMnSCRPAGE to access the scratch memory. A flat * mapping of the scratch memory is available for software * convenience and to prevent corruption while the sequencer is * running. This memory is mapped onto addresses 800h - 9FFh. * * These addresses are mapped as follows: * * 800h-85Fh Mode Dependent Scratch Mode 0 Pages 0-2 * 860h-87Fh Mode Dependent Scratch Mode 0 Page 3 * Mode Dependent Scratch Mode 5 Page 0 * 880h-8DFh Mode Dependent Scratch Mode 1 Pages 0-2 * 8E0h-8FFh Mode Dependent Scratch Mode 1 Page 3 * Mode Dependent Scratch Mode 5 Page 1 * 900h-95Fh Mode Dependent Scratch Mode 2 Pages 0-2 * 960h-97Fh Mode Dependent Scratch Mode 2 Page 3 * Mode Dependent Scratch Mode 5 Page 2 * 980h-9DFh Mode Independent Scratch Pages 0-3 * 9E0h-9FFh Mode Independent Scratch Page 3 * Mode Dependent Scratch Mode 5 Page 3 * ****************************************************************************/ /* General macros */ #define LSEQ_MODE_SCRATCH_SIZE 0x80 /* Size of scratch RAM per mode */ #define LSEQ_PAGE_SIZE 0x20 /* Scratch page size (in bytes) */ #define LSEQ_MODE5_PAGE0_OFFSET 0x60 /* Common mode dependent scratch page 0 macros for modes 0,1,2, and 5 */ /* Indexed using LSEQ_MODE_SCRATCH_SIZE * mode, for modes 0,1,2. */ #define LmSEQ_RET_ADDR(LinkNum) (LmSCRATCH(LinkNum) + 0x0000) #define LmSEQ_REG0_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x0002) #define LmSEQ_MODE_FLAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x0004) /* Mode flag macros (byte 0) */ #define SAS_SAVECTX_OCCURRED 0x80 #define SAS_OOBSVC_OCCURRED 0x40 #define SAS_OOB_DEVICE_PRESENT 0x20 #define SAS_CFGHDR_OCCURRED 0x10 #define SAS_RCV_INTS_ARE_DISABLED 0x08 #define SAS_OOB_HOT_PLUG_CNCT 0x04 #define SAS_AWAIT_OPEN_CONNECTION 0x02 #define SAS_CFGCMPLT_OCCURRED 0x01 /* Mode flag macros (byte 1) */ #define SAS_RLSSCB_OCCURRED 0x80 #define SAS_FORCED_HEADER_MISS 0x40 #define LmSEQ_RET_ADDR2(LinkNum) (LmSCRATCH(LinkNum) + 0x0006) #define LmSEQ_RET_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x0008) #define LmSEQ_OPCODE_TO_CSEQ(LinkNum) (LmSCRATCH(LinkNum) + 0x000B) #define LmSEQ_DATA_TO_CSEQ(LinkNum) (LmSCRATCH(LinkNum) + 0x000C) /* Mode dependent scratch page 0 macros for mode 0 (non-common) */ /* Absolute offsets */ #define LmSEQ_FIRST_INV_DDB_SITE(LinkNum) (LmSCRATCH(LinkNum) + 0x000E) #define LmSEQ_EMPTY_TRANS_CTX(LinkNum) (LmSCRATCH(LinkNum) + 0x0010) #define LmSEQ_RESP_LEN(LinkNum) (LmSCRATCH(LinkNum) + 0x0012) #define LmSEQ_FIRST_INV_SCB_SITE(LinkNum) (LmSCRATCH(LinkNum) + 0x0014) #define LmSEQ_INTEN_SAVE(LinkNum) (LmSCRATCH(LinkNum) + 0x0016) #define LmSEQ_LINK_RST_FRM_LEN(LinkNum) (LmSCRATCH(LinkNum) + 0x001A) #define LmSEQ_LINK_RST_PROTOCOL(LinkNum) (LmSCRATCH(LinkNum) + 0x001B) #define LmSEQ_RESP_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x001C) #define LmSEQ_LAST_LOADED_SGE(LinkNum) (LmSCRATCH(LinkNum) + 0x001D) #define LmSEQ_SAVE_SCBPTR(LinkNum) (LmSCRATCH(LinkNum) + 0x001E) /* Mode dependent scratch page 0 macros for mode 1 (non-common) */ /* Absolute offsets */ #define LmSEQ_Q_XMIT_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x008E) #define LmSEQ_M1_EMPTY_TRANS_CTX(LinkNum) (LmSCRATCH(LinkNum) + 0x0090) #define LmSEQ_INI_CONN_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x0092) #define LmSEQ_FAILED_OPEN_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x009A) #define LmSEQ_XMIT_REQUEST_TYPE(LinkNum) (LmSCRATCH(LinkNum) + 0x009B) #define LmSEQ_M1_RESP_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x009C) #define LmSEQ_M1_LAST_LOADED_SGE(LinkNum) (LmSCRATCH(LinkNum) + 0x009D) #define LmSEQ_M1_SAVE_SCBPTR(LinkNum) (LmSCRATCH(LinkNum) + 0x009E) /* Mode dependent scratch page 0 macros for mode 2 (non-common) */ #define LmSEQ_PORT_COUNTER(LinkNum) (LmSCRATCH(LinkNum) + 0x010E) #define LmSEQ_PM_TABLE_PTR(LinkNum) (LmSCRATCH(LinkNum) + 0x0110) #define LmSEQ_SATA_INTERLOCK_TMR_SAVE(LinkNum) (LmSCRATCH(LinkNum) + 0x0112) #define LmSEQ_IP_BITL(LinkNum) (LmSCRATCH(LinkNum) + 0x0114) #define LmSEQ_COPY_SMP_CONN_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x0116) #define LmSEQ_P0M2_OFFS1AH(LinkNum) (LmSCRATCH(LinkNum) + 0x011A) /* Mode dependent scratch page 0 macros for modes 4/5 (non-common) */ /* Absolute offsets */ #define LmSEQ_SAVED_OOB_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x006E) #define LmSEQ_SAVED_OOB_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x006F) #define LmSEQ_Q_LINK_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x0070) #define LmSEQ_LINK_RST_ERR(LinkNum) (LmSCRATCH(LinkNum) + 0x0072) #define LmSEQ_SAVED_OOB_SIGNALS(LinkNum) (LmSCRATCH(LinkNum) + 0x0073) #define LmSEQ_SAS_RESET_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x0074) #define LmSEQ_LINK_RESET_RETRY_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0075) #define LmSEQ_NUM_LINK_RESET_RETRIES(LinkNum) (LmSCRATCH(LinkNum) + 0x0076) #define LmSEQ_OOB_INT_ENABLES(LinkNum) (LmSCRATCH(LinkNum) + 0x0078) #define LmSEQ_NOTIFY_TIMER_DOWN_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x007A) #define LmSEQ_NOTIFY_TIMER_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x007C) #define LmSEQ_NOTIFY_TIMER_INITIAL_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x007E) /* Mode dependent scratch page 1, mode 0 and mode 1 */ #define LmSEQ_SG_LIST_PTR_ADDR0(LinkNum) (LmSCRATCH(LinkNum) + 0x0020) #define LmSEQ_SG_LIST_PTR_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x0030) #define LmSEQ_M1_SG_LIST_PTR_ADDR0(LinkNum) (LmSCRATCH(LinkNum) + 0x00A0) #define LmSEQ_M1_SG_LIST_PTR_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x00B0) /* Mode dependent scratch page 1 macros for mode 2 */ /* Absolute offsets */ #define LmSEQ_INVALID_DWORD_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0120) #define LmSEQ_DISPARITY_ERROR_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0124) #define LmSEQ_LOSS_OF_SYNC_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0128) /* Mode dependent scratch page 1 macros for mode 4/5 */ #define LmSEQ_FRAME_TYPE_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E0) #define LmSEQ_HASHED_DEST_ADDR_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E1) #define LmSEQ_HASHED_SRC_ADDR_MASK_PRINT(LinkNum) (LmSCRATCH(LinkNum) + 0x00E4) #define LmSEQ_HASHED_SRC_ADDR_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E5) #define LmSEQ_NUM_FILL_BYTES_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00EB) #define LmSEQ_TAG_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00F0) #define LmSEQ_TARGET_PORT_XFER_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x00F2) #define LmSEQ_DATA_OFFSET(LinkNum) (LmSCRATCH(LinkNum) + 0x00F4) /* Mode dependent scratch page 2 macros for mode 0 */ /* Absolute offsets */ #define LmSEQ_SMP_RCV_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0040) #define LmSEQ_DEVICE_BITS(LinkNum) (LmSCRATCH(LinkNum) + 0x005B) #define LmSEQ_SDB_DDB(LinkNum) (LmSCRATCH(LinkNum) + 0x005C) #define LmSEQ_SDB_NUM_TAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x005E) #define LmSEQ_SDB_CURR_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x005F) /* Mode dependent scratch page 2 macros for mode 1 */ /* Absolute offsets */ /* byte 0 bits 1-0 are domain select. */ #define LmSEQ_TX_ID_ADDR_FRAME(LinkNum) (LmSCRATCH(LinkNum) + 0x00C0) #define LmSEQ_OPEN_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x00C8) #define LmSEQ_SRST_AS_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x00CC) #define LmSEQ_LAST_LOADED_SG_EL(LinkNum) (LmSCRATCH(LinkNum) + 0x00D4) /* Mode dependent scratch page 2 macros for mode 2 */ /* Absolute offsets */ #define LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0140) #define LmSEQ_CLOSE_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0144) #define LmSEQ_BREAK_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0148) #define LmSEQ_DWS_RESET_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x014C) #define LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(LinkNum) \ (LmSCRATCH(LinkNum) + 0x0150) #define LmSEQ_MCTL_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0154) /* Mode dependent scratch page 2 macros for mode 5 */ #define LmSEQ_COMINIT_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0160) #define LmSEQ_RCV_ID_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0164) #define LmSEQ_RCV_FIS_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0168) #define LmSEQ_DEV_PRES_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x016C) /* Mode dependent scratch page 3 macros for modes 0 and 1 */ /* None defined */ /* Mode dependent scratch page 3 macros for modes 2 and 5 */ /* None defined */ /* Mode Independent Scratch page 0 macros. */ #define LmSEQ_Q_TGTXFR_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x0180) #define LmSEQ_Q_TGTXFR_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x0182) #define LmSEQ_LINK_NUMBER(LinkNum) (LmSCRATCH(LinkNum) + 0x0186) #define LmSEQ_SCRATCH_FLAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x0187) /* * Currently only bit 0, SAS_DWSAQD, is used. */ #define SAS_DWSAQD 0x01 /* * DWSSTATUS: DWSAQD * bit las read in ISR. */ #define LmSEQ_CONNECTION_STATE(LinkNum) (LmSCRATCH(LinkNum) + 0x0188) /* Connection states (byte 0) */ #define SAS_WE_OPENED_CS 0x01 #define SAS_DEVICE_OPENED_CS 0x02 #define SAS_WE_SENT_DONE_CS 0x04 #define SAS_DEVICE_SENT_DONE_CS 0x08 #define SAS_WE_SENT_CLOSE_CS 0x10 #define SAS_DEVICE_SENT_CLOSE_CS 0x20 #define SAS_WE_SENT_BREAK_CS 0x40 #define SAS_DEVICE_SENT_BREAK_CS 0x80 /* Connection states (byte 1) */ #define SAS_OPN_TIMEOUT_OR_OPN_RJCT_CS 0x01 #define SAS_AIP_RECEIVED_CS 0x02 #define SAS_CREDIT_TIMEOUT_OCCURRED_CS 0x04 #define SAS_ACKNAK_TIMEOUT_OCCURRED_CS 0x08 #define SAS_SMPRSP_TIMEOUT_OCCURRED_CS 0x10 #define SAS_DONE_TIMEOUT_OCCURRED_CS 0x20 /* Connection states (byte 2) */ #define SAS_SMP_RESPONSE_RECEIVED_CS 0x01 #define SAS_INTLK_TIMEOUT_OCCURRED_CS 0x02 #define SAS_DEVICE_SENT_DMAT_CS 0x04 #define SAS_DEVICE_SENT_SYNCSRST_CS 0x08 #define SAS_CLEARING_AFFILIATION_CS 0x20 #define SAS_RXTASK_ACTIVE_CS 0x40 #define SAS_TXTASK_ACTIVE_CS 0x80 /* Connection states (byte 3) */ #define SAS_PHY_LOSS_OF_SIGNAL_CS 0x01 #define SAS_DWS_TIMER_EXPIRED_CS 0x02 #define SAS_LINK_RESET_NOT_COMPLETE_CS 0x04 #define SAS_PHY_DISABLED_CS 0x08 #define SAS_LINK_CTL_TASK_ACTIVE_CS 0x10 #define SAS_PHY_EVENT_TASK_ACTIVE_CS 0x20 #define SAS_DEVICE_SENT_ID_FRAME_CS 0x40 #define SAS_DEVICE_SENT_REG_FIS_CS 0x40 #define SAS_DEVICE_SENT_HARD_RESET_CS 0x80 #define SAS_PHY_IS_DOWN_FLAGS (SAS_PHY_LOSS_OF_SIGNAL_CS|\ SAS_DWS_TIMER_EXPIRED_CS |\ SAS_LINK_RESET_NOT_COMPLETE_CS|\ SAS_PHY_DISABLED_CS) #define SAS_LINK_CTL_PHY_EVENT_FLAGS (SAS_LINK_CTL_TASK_ACTIVE_CS |\ SAS_PHY_EVENT_TASK_ACTIVE_CS |\ SAS_DEVICE_SENT_ID_FRAME_CS |\ SAS_DEVICE_SENT_HARD_RESET_CS) #define LmSEQ_CONCTL(LinkNum) (LmSCRATCH(LinkNum) + 0x018C) #define LmSEQ_CONSTAT(LinkNum) (LmSCRATCH(LinkNum) + 0x018E) #define LmSEQ_CONNECTION_MODES(LinkNum) (LmSCRATCH(LinkNum) + 0x018F) #define LmSEQ_REG1_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0192) #define LmSEQ_REG2_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0194) #define LmSEQ_REG3_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0196) #define LmSEQ_REG0_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0198) /* Mode independent scratch page 1 macros. */ #define LmSEQ_EST_NEXUS_SCBPTR0(LinkNum) (LmSCRATCH(LinkNum) + 0x01A0) #define LmSEQ_EST_NEXUS_SCBPTR1(LinkNum) (LmSCRATCH(LinkNum) + 0x01A2) #define LmSEQ_EST_NEXUS_SCBPTR2(LinkNum) (LmSCRATCH(LinkNum) + 0x01A4) #define LmSEQ_EST_NEXUS_SCBPTR3(LinkNum) (LmSCRATCH(LinkNum) + 0x01A6) #define LmSEQ_EST_NEXUS_SCB_OPCODE0(LinkNum) (LmSCRATCH(LinkNum) + 0x01A8) #define LmSEQ_EST_NEXUS_SCB_OPCODE1(LinkNum) (LmSCRATCH(LinkNum) + 0x01A9) #define LmSEQ_EST_NEXUS_SCB_OPCODE2(LinkNum) (LmSCRATCH(LinkNum) + 0x01AA) #define LmSEQ_EST_NEXUS_SCB_OPCODE3(LinkNum) (LmSCRATCH(LinkNum) + 0x01AB) #define LmSEQ_EST_NEXUS_SCB_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x01AC) #define LmSEQ_EST_NEXUS_SCB_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01AD) #define LmSEQ_EST_NEXUS_BUF_AVAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01AE) #define LmSEQ_TIMEOUT_CONST(LinkNum) (LmSCRATCH(LinkNum) + 0x01B8) #define LmSEQ_ISR_SAVE_SINDEX(LinkNum) (LmSCRATCH(LinkNum) + 0x01BC) #define LmSEQ_ISR_SAVE_DINDEX(LinkNum) (LmSCRATCH(LinkNum) + 0x01BE) /* Mode independent scratch page 2 macros. */ #define LmSEQ_EMPTY_SCB_PTR0(LinkNum) (LmSCRATCH(LinkNum) + 0x01C0) #define LmSEQ_EMPTY_SCB_PTR1(LinkNum) (LmSCRATCH(LinkNum) + 0x01C2) #define LmSEQ_EMPTY_SCB_PTR2(LinkNum) (LmSCRATCH(LinkNum) + 0x01C4) #define LmSEQ_EMPTY_SCB_PTR3(LinkNum) (LmSCRATCH(LinkNum) + 0x01C6) #define LmSEQ_EMPTY_SCB_OPCD0(LinkNum) (LmSCRATCH(LinkNum) + 0x01C8) #define LmSEQ_EMPTY_SCB_OPCD1(LinkNum) (LmSCRATCH(LinkNum) + 0x01C9) #define LmSEQ_EMPTY_SCB_OPCD2(LinkNum) (LmSCRATCH(LinkNum) + 0x01CA) #define LmSEQ_EMPTY_SCB_OPCD3(LinkNum) (LmSCRATCH(LinkNum) + 0x01CB) #define LmSEQ_EMPTY_SCB_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x01CC) #define LmSEQ_EMPTY_SCB_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01CD) #define LmSEQ_EMPTY_BUFS_AVAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01CE) #define LmSEQ_ATA_SCR_REGS(LinkNum) (LmSCRATCH(LinkNum) + 0x01D4) /* Mode independent scratch page 3 macros. */ #define LmSEQ_DEV_PRES_TMR_TOUT_CONST(LinkNum) (LmSCRATCH(LinkNum) + 0x01E0) #define LmSEQ_SATA_INTERLOCK_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01E4) #define LmSEQ_STP_SHUTDOWN_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01E8) #define LmSEQ_SRST_ASSERT_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01EC) #define LmSEQ_RCV_FIS_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F0) #define LmSEQ_ONE_MILLISEC_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F4) #define LmSEQ_TEN_MS_COMINIT_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F8) #define LmSEQ_SMP_RCV_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01FC) #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1