| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Sreekanth Reddy | 826 | 99.16% | 2 | 40.00% |
| Suganath Prabu Subramani | 6 | 0.72% | 2 | 40.00% |
| Greg Kroah-Hartman | 1 | 0.12% | 1 | 20.00% |
| Total | 833 | 5 |
/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2000-2020 Broadcom Inc. All rights reserved. * * * Name: mpi2_sas.h * Title: MPI Serial Attached SCSI structures and definitions * Creation Date: February 9, 2007 * * mpi2_sas.h Version: 02.00.10 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used * with MPI v2.0 products. Unless otherwise noted, names beginning with * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit * Control Request. * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control * Request. * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST * to MPI2_SGE_IO_UNION since it supports chained SGLs. * 05-12-10 02.00.04 Modified some comments. * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control. * 11-18-11 02.00.06 Incorporating additions for MPI v2.5. * 07-10-12 02.00.07 Added MPI2_SATA_PT_SGE_UNION for use in the SATA * Passthrough Request message. * 08-19-13 02.00.08 Made MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL obsolete * for anything newer than MPI v2.0. * 11-18-14 02.00.09 Updated copyright information. * 03-16-15 02.00.10 Updated for MPI v2.6. * Added MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA. * -------------------------------------------------------------------------- */ #ifndef MPI2_SAS_H #define MPI2_SAS_H /* *Values for SASStatus. */ #define MPI2_SASSTATUS_SUCCESS (0x00) #define MPI2_SASSTATUS_UNKNOWN_ERROR (0x01) #define MPI2_SASSTATUS_INVALID_FRAME (0x02) #define MPI2_SASSTATUS_UTC_BAD_DEST (0x03) #define MPI2_SASSTATUS_UTC_BREAK_RECEIVED (0x04) #define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) #define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) #define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) #define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) #define MPI2_SASSTATUS_UTC_WRONG_DESTINATION (0x09) #define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) #define MPI2_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) #define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) #define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) #define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) #define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) #define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) #define MPI2_SASSTATUS_DATA_OFFSET_ERROR (0x11) #define MPI2_SASSTATUS_SDSF_NAK_RECEIVED (0x12) #define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) #define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) /* *Values for the SAS DeviceInfo field used in SAS Device Status Change Event *data and SAS Configuration pages. */ #define MPI2_SAS_DEVICE_INFO_SEP (0x00004000) #define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) #define MPI2_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) #define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) #define MPI2_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) #define MPI2_SAS_DEVICE_INFO_STP_TARGET (0x00000200) #define MPI2_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) #define MPI2_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) #define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) #define MPI2_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) #define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) #define MPI2_SAS_DEVICE_INFO_SATA_HOST (0x00000008) #define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) #define MPI2_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) #define MPI2_SAS_DEVICE_INFO_END_DEVICE (0x00000001) #define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) #define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) /***************************************************************************** * * SAS Messages * *****************************************************************************/ /**************************************************************************** * SMP Passthrough messages ****************************************************************************/ /*SMP Passthrough Request Message */ typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST { U8 PassthroughFlags; /*0x00 */ U8 PhysicalPort; /*0x01 */ U8 ChainOffset; /*0x02 */ U8 Function; /*0x03 */ U16 RequestDataLength; /*0x04 */ U8 SGLFlags; /*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved1; /*0x0A */ U32 Reserved2; /*0x0C */ U64 SASAddress; /*0x10 */ U32 Reserved3; /*0x18 */ U32 Reserved4; /*0x1C */ MPI2_SIMPLE_SGE_UNION SGL;/*0x20 */ } MPI2_SMP_PASSTHROUGH_REQUEST, *PTR_MPI2_SMP_PASSTHROUGH_REQUEST, Mpi2SmpPassthroughRequest_t, *pMpi2SmpPassthroughRequest_t; /*values for PassthroughFlags field */ #define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) /*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ /*SMP Passthrough Reply Message */ typedef struct _MPI2_SMP_PASSTHROUGH_REPLY { U8 PassthroughFlags; /*0x00 */ U8 PhysicalPort; /*0x01 */ U8 MsgLength; /*0x02 */ U8 Function; /*0x03 */ U16 ResponseDataLength; /*0x04 */ U8 SGLFlags; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved1; /*0x0A */ U8 Reserved2; /*0x0C */ U8 SASStatus; /*0x0D */ U16 IOCStatus; /*0x0E */ U32 IOCLogInfo; /*0x10 */ U32 Reserved3; /*0x14 */ U8 ResponseData[4]; /*0x18 */ } MPI2_SMP_PASSTHROUGH_REPLY, *PTR_MPI2_SMP_PASSTHROUGH_REPLY, Mpi2SmpPassthroughReply_t, *pMpi2SmpPassthroughReply_t; /*values for PassthroughFlags field */ #define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) /*values for SASStatus field are at the top of this file */ /**************************************************************************** * SATA Passthrough messages ****************************************************************************/ typedef union _MPI2_SATA_PT_SGE_UNION { MPI2_SGE_SIMPLE_UNION MpiSimple; /*MPI v2.0 only */ MPI2_SGE_CHAIN_UNION MpiChain; /*MPI v2.0 only */ MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; MPI2_IEEE_SGE_CHAIN_UNION IeeeChain; /*MPI v2.0 only */ MPI25_IEEE_SGE_CHAIN64 IeeeChain64; /*MPI v2.5 only */ } MPI2_SATA_PT_SGE_UNION, *PTR_MPI2_SATA_PT_SGE_UNION, Mpi2SataPTSGEUnion_t, *pMpi2SataPTSGEUnion_t; /*SATA Passthrough Request Message */ typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST { U16 DevHandle; /*0x00 */ U8 ChainOffset; /*0x02 */ U8 Function; /*0x03 */ U16 PassthroughFlags; /*0x04 */ U8 SGLFlags; /*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved1; /*0x0A */ U32 Reserved2; /*0x0C */ U32 Reserved3; /*0x10 */ U32 Reserved4; /*0x14 */ U32 DataLength; /*0x18 */ U8 CommandFIS[20]; /*0x1C */ MPI2_SATA_PT_SGE_UNION SGL;/*0x30*//*MPI v2.5: IEEE 64 elements only*/ } MPI2_SATA_PASSTHROUGH_REQUEST, *PTR_MPI2_SATA_PASSTHROUGH_REQUEST, Mpi2SataPassthroughRequest_t, *pMpi2SataPassthroughRequest_t; /*values for PassthroughFlags field */ #define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) #define MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA (0x0040) #define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) #define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) #define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) #define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) #define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001) /*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ /*SATA Passthrough Reply Message */ typedef struct _MPI2_SATA_PASSTHROUGH_REPLY { U16 DevHandle; /*0x00 */ U8 MsgLength; /*0x02 */ U8 Function; /*0x03 */ U16 PassthroughFlags; /*0x04 */ U8 SGLFlags; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved1; /*0x0A */ U8 Reserved2; /*0x0C */ U8 SASStatus; /*0x0D */ U16 IOCStatus; /*0x0E */ U32 IOCLogInfo; /*0x10 */ U8 StatusFIS[20]; /*0x14 */ U32 StatusControlRegisters; /*0x28 */ U32 TransferCount; /*0x2C */ } MPI2_SATA_PASSTHROUGH_REPLY, *PTR_MPI2_SATA_PASSTHROUGH_REPLY, Mpi2SataPassthroughReply_t, *pMpi2SataPassthroughReply_t; /*values for SASStatus field are at the top of this file */ /**************************************************************************** * SAS IO Unit Control messages * (MPI v2.5 and earlier only. * Replaced by IO Unit Control messages in MPI v2.6 and later.) ****************************************************************************/ /*SAS IO Unit Control Request Message */ typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST { U8 Operation; /*0x00 */ U8 Reserved1; /*0x01 */ U8 ChainOffset; /*0x02 */ U8 Function; /*0x03 */ U16 DevHandle; /*0x04 */ U8 IOCParameter; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved3; /*0x0A */ U16 Reserved4; /*0x0C */ U8 PhyNum; /*0x0E */ U8 PrimFlags; /*0x0F */ U32 Primitive; /*0x10 */ U8 LookupMethod; /*0x14 */ U8 Reserved5; /*0x15 */ U16 SlotNumber; /*0x16 */ U64 LookupAddress; /*0x18 */ U32 IOCParameterValue; /*0x20 */ U32 Reserved7; /*0x24 */ U32 Reserved8; /*0x28 */ } MPI2_SAS_IOUNIT_CONTROL_REQUEST, *PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST, Mpi2SasIoUnitControlRequest_t, *pMpi2SasIoUnitControlRequest_t; /*values for the Operation field */ #define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) #define MPI2_SAS_OP_PHY_LINK_RESET (0x06) #define MPI2_SAS_OP_PHY_HARD_RESET (0x07) #define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) #define MPI2_SAS_OP_SEND_PRIMITIVE (0x0A) #define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B) #define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) /* MPI v2.0 only */ #define MPI2_SAS_OP_REMOVE_DEVICE (0x0D) #define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E) #define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F) #define MPI25_SAS_OP_ENABLE_FP_DEVICE (0x10) #define MPI25_SAS_OP_DISABLE_FP_DEVICE (0x11) #define MPI25_SAS_OP_ENABLE_FP_ALL (0x12) #define MPI25_SAS_OP_DISABLE_FP_ALL (0x13) #define MPI2_SAS_OP_DEV_ENABLE_NCQ (0x14) #define MPI2_SAS_OP_DEV_DISABLE_NCQ (0x15) #define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80) /*values for the PrimFlags field */ #define MPI2_SAS_PRIMFLAGS_SINGLE (0x08) #define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02) #define MPI2_SAS_PRIMFLAGS_REDUNDANT (0x01) /*values for the LookupMethod field */ #define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS (0x01) #define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT (0x02) #define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) /*SAS IO Unit Control Reply Message */ typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY { U8 Operation; /*0x00 */ U8 Reserved1; /*0x01 */ U8 MsgLength; /*0x02 */ U8 Function; /*0x03 */ U16 DevHandle; /*0x04 */ U8 IOCParameter; /*0x06 */ U8 MsgFlags; /*0x07 */ U8 VP_ID; /*0x08 */ U8 VF_ID; /*0x09 */ U16 Reserved3; /*0x0A */ U16 Reserved4; /*0x0C */ U16 IOCStatus; /*0x0E */ U32 IOCLogInfo; /*0x10 */ } MPI2_SAS_IOUNIT_CONTROL_REPLY, *PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY, Mpi2SasIoUnitControlReply_t, *pMpi2SasIoUnitControlReply_t; #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1