| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Jack Wang | 3062 | 99.29% | 3 | 33.33% |
| Anand Kumar Santhanam | 12 | 0.39% | 1 | 11.11% |
| Sakthivel K | 6 | 0.19% | 2 | 22.22% |
| Santosh Nayak | 2 | 0.06% | 2 | 22.22% |
| Lucas De Marchi | 2 | 0.06% | 1 | 11.11% |
| Total | 3084 | 9 |
/* * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver * * Copyright (c) 2008-2009 USI Co., Ltd. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. * */ #ifndef _PMC8001_REG_H_ #define _PMC8001_REG_H_ #include <linux/types.h> #include <scsi/libsas.h> /* for Request Opcode of IOMB */ #define OPC_INB_ECHO 1 /* 0x000 */ #define OPC_INB_PHYSTART 4 /* 0x004 */ #define OPC_INB_PHYSTOP 5 /* 0x005 */ #define OPC_INB_SSPINIIOSTART 6 /* 0x006 */ #define OPC_INB_SSPINITMSTART 7 /* 0x007 */ #define OPC_INB_SSPINIEXTIOSTART 8 /* 0x008 */ #define OPC_INB_DEV_HANDLE_ACCEPT 9 /* 0x009 */ #define OPC_INB_SSPTGTIOSTART 10 /* 0x00A */ #define OPC_INB_SSPTGTRSPSTART 11 /* 0x00B */ #define OPC_INB_SSPINIEDCIOSTART 12 /* 0x00C */ #define OPC_INB_SSPINIEXTEDCIOSTART 13 /* 0x00D */ #define OPC_INB_SSPTGTEDCIOSTART 14 /* 0x00E */ #define OPC_INB_SSP_ABORT 15 /* 0x00F */ #define OPC_INB_DEREG_DEV_HANDLE 16 /* 0x010 */ #define OPC_INB_GET_DEV_HANDLE 17 /* 0x011 */ #define OPC_INB_SMP_REQUEST 18 /* 0x012 */ /* SMP_RESPONSE is removed */ #define OPC_INB_SMP_RESPONSE 19 /* 0x013 */ #define OPC_INB_SMP_ABORT 20 /* 0x014 */ #define OPC_INB_REG_DEV 22 /* 0x016 */ #define OPC_INB_SATA_HOST_OPSTART 23 /* 0x017 */ #define OPC_INB_SATA_ABORT 24 /* 0x018 */ #define OPC_INB_LOCAL_PHY_CONTROL 25 /* 0x019 */ #define OPC_INB_GET_DEV_INFO 26 /* 0x01A */ #define OPC_INB_FW_FLASH_UPDATE 32 /* 0x020 */ #define OPC_INB_GPIO 34 /* 0x022 */ #define OPC_INB_SAS_DIAG_MODE_START_END 35 /* 0x023 */ #define OPC_INB_SAS_DIAG_EXECUTE 36 /* 0x024 */ #define OPC_INB_SAS_HW_EVENT_ACK 37 /* 0x025 */ #define OPC_INB_GET_TIME_STAMP 38 /* 0x026 */ #define OPC_INB_PORT_CONTROL 39 /* 0x027 */ #define OPC_INB_GET_NVMD_DATA 40 /* 0x028 */ #define OPC_INB_SET_NVMD_DATA 41 /* 0x029 */ #define OPC_INB_SET_DEVICE_STATE 42 /* 0x02A */ #define OPC_INB_GET_DEVICE_STATE 43 /* 0x02B */ #define OPC_INB_SET_DEV_INFO 44 /* 0x02C */ #define OPC_INB_SAS_RE_INITIALIZE 45 /* 0x02D */ /* for Response Opcode of IOMB */ #define OPC_OUB_ECHO 1 /* 0x001 */ #define OPC_OUB_HW_EVENT 4 /* 0x004 */ #define OPC_OUB_SSP_COMP 5 /* 0x005 */ #define OPC_OUB_SMP_COMP 6 /* 0x006 */ #define OPC_OUB_LOCAL_PHY_CNTRL 7 /* 0x007 */ #define OPC_OUB_DEV_REGIST 10 /* 0x00A */ #define OPC_OUB_DEREG_DEV 11 /* 0x00B */ #define OPC_OUB_GET_DEV_HANDLE 12 /* 0x00C */ #define OPC_OUB_SATA_COMP 13 /* 0x00D */ #define OPC_OUB_SATA_EVENT 14 /* 0x00E */ #define OPC_OUB_SSP_EVENT 15 /* 0x00F */ #define OPC_OUB_DEV_HANDLE_ARRIV 16 /* 0x010 */ /* SMP_RECEIVED Notification is removed */ #define OPC_OUB_SMP_RECV_EVENT 17 /* 0x011 */ #define OPC_OUB_SSP_RECV_EVENT 18 /* 0x012 */ #define OPC_OUB_DEV_INFO 19 /* 0x013 */ #define OPC_OUB_FW_FLASH_UPDATE 20 /* 0x014 */ #define OPC_OUB_GPIO_RESPONSE 22 /* 0x016 */ #define OPC_OUB_GPIO_EVENT 23 /* 0x017 */ #define OPC_OUB_GENERAL_EVENT 24 /* 0x018 */ #define OPC_OUB_SSP_ABORT_RSP 26 /* 0x01A */ #define OPC_OUB_SATA_ABORT_RSP 27 /* 0x01B */ #define OPC_OUB_SAS_DIAG_MODE_START_END 28 /* 0x01C */ #define OPC_OUB_SAS_DIAG_EXECUTE 29 /* 0x01D */ #define OPC_OUB_GET_TIME_STAMP 30 /* 0x01E */ #define OPC_OUB_SAS_HW_EVENT_ACK 31 /* 0x01F */ #define OPC_OUB_PORT_CONTROL 32 /* 0x020 */ #define OPC_OUB_SKIP_ENTRY 33 /* 0x021 */ #define OPC_OUB_SMP_ABORT_RSP 34 /* 0x022 */ #define OPC_OUB_GET_NVMD_DATA 35 /* 0x023 */ #define OPC_OUB_SET_NVMD_DATA 36 /* 0x024 */ #define OPC_OUB_DEVICE_HANDLE_REMOVAL 37 /* 0x025 */ #define OPC_OUB_SET_DEVICE_STATE 38 /* 0x026 */ #define OPC_OUB_GET_DEVICE_STATE 39 /* 0x027 */ #define OPC_OUB_SET_DEV_INFO 40 /* 0x028 */ #define OPC_OUB_SAS_RE_INITIALIZE 41 /* 0x029 */ /* for phy start*/ #define SPINHOLD_DISABLE (0x00 << 14) #define SPINHOLD_ENABLE (0x01 << 14) #define LINKMODE_SAS (0x01 << 12) #define LINKMODE_DSATA (0x02 << 12) #define LINKMODE_AUTO (0x03 << 12) #define LINKRATE_15 (0x01 << 8) #define LINKRATE_30 (0x02 << 8) #define LINKRATE_60 (0x04 << 8) /* for new SPC controllers MEMBASE III is shared between BIOS and DATA */ #define GSM_SM_BASE 0x4F0000 struct mpi_msg_hdr{ __le32 header; /* Bits [11:0] - Message operation code */ /* Bits [15:12] - Message Category */ /* Bits [21:16] - Outboundqueue ID for the operation completion message */ /* Bits [23:22] - Reserved */ /* Bits [28:24] - Buffer Count, indicates how many buffer are allocated for the massage */ /* Bits [30:29] - Reserved */ /* Bits [31] - Message Valid bit */ } __attribute__((packed, aligned(4))); /* * brief the data structure of PHY Start Command * use to describe enable the phy (64 bytes) */ struct phy_start_req { __le32 tag; __le32 ase_sh_lm_slr_phyid; struct sas_identify_frame sas_identify; u32 reserved[5]; } __attribute__((packed, aligned(4))); /* * brief the data structure of PHY Start Command * use to disable the phy (64 bytes) */ struct phy_stop_req { __le32 tag; __le32 phy_id; u32 reserved[13]; } __attribute__((packed, aligned(4))); /* set device bits fis - device to host */ struct set_dev_bits_fis { u8 fis_type; /* 0xA1*/ u8 n_i_pmport; /* b7 : n Bit. Notification bit. If set device needs attention. */ /* b6 : i Bit. Interrupt Bit */ /* b5-b4: reserved2 */ /* b3-b0: PM Port */ u8 status; u8 error; u32 _r_a; } __attribute__ ((packed)); /* PIO setup FIS - device to host */ struct pio_setup_fis { u8 fis_type; /* 0x5f */ u8 i_d_pmPort; /* b7 : reserved */ /* b6 : i bit. Interrupt bit */ /* b5 : d bit. data transfer direction. set to 1 for device to host xfer */ /* b4 : reserved */ /* b3-b0: PM Port */ u8 status; u8 error; u8 lbal; u8 lbam; u8 lbah; u8 device; u8 lbal_exp; u8 lbam_exp; u8 lbah_exp; u8 _r_a; u8 sector_count; u8 sector_count_exp; u8 _r_b; u8 e_status; u8 _r_c[2]; u8 transfer_count; } __attribute__ ((packed)); /* * brief the data structure of SATA Completion Response * use to describe the sata task response (64 bytes) */ struct sata_completion_resp { __le32 tag; __le32 status; __le32 param; u32 sata_resp[12]; } __attribute__((packed, aligned(4))); /* * brief the data structure of SAS HW Event Notification * use to alert the host about the hardware event(64 bytes) */ struct hw_event_resp { __le32 lr_evt_status_phyid_portid; __le32 evt_param; __le32 npip_portstate; struct sas_identify_frame sas_identify; struct dev_to_host_fis sata_fis; } __attribute__((packed, aligned(4))); /* * brief the data structure of REGISTER DEVICE Command * use to describe MPI REGISTER DEVICE Command (64 bytes) */ struct reg_dev_req { __le32 tag; __le32 phyid_portid; __le32 dtype_dlr_retry; __le32 firstburstsize_ITNexustimeout; u8 sas_addr[SAS_ADDR_SIZE]; __le32 upper_device_id; u32 reserved[8]; } __attribute__((packed, aligned(4))); /* * brief the data structure of DEREGISTER DEVICE Command * use to request spc to remove all internal resources associated * with the device id (64 bytes) */ struct dereg_dev_req { __le32 tag; __le32 device_id; u32 reserved[13]; } __attribute__((packed, aligned(4))); /* * brief the data structure of DEVICE_REGISTRATION Response * use to notify the completion of the device registration (64 bytes) */ struct dev_reg_resp { __le32 tag; __le32 status; __le32 device_id; u32 reserved[12]; } __attribute__((packed, aligned(4))); /* * brief the data structure of Local PHY Control Command * use to issue PHY CONTROL to local phy (64 bytes) */ struct local_phy_ctl_req { __le32 tag; __le32 phyop_phyid; u32 reserved1[13]; } __attribute__((packed, aligned(4))); /** * brief the data structure of Local Phy Control Response * use to describe MPI Local Phy Control Response (64 bytes) */ struct local_phy_ctl_resp { __le32 tag; __le32 phyop_phyid; __le32 status; u32 reserved[12]; } __attribute__((packed, aligned(4))); #define OP_BITS 0x0000FF00 #define ID_BITS 0x000000FF /* * brief the data structure of PORT Control Command * use to control port properties (64 bytes) */ struct port_ctl_req { __le32 tag; __le32 portop_portid; __le32 param0; __le32 param1; u32 reserved1[11]; } __attribute__((packed, aligned(4))); /* * brief the data structure of HW Event Ack Command * use to acknowledge receive HW event (64 bytes) */ struct hw_event_ack_req { __le32 tag; __le32 sea_phyid_portid; __le32 param0; __le32 param1; u32 reserved1[11]; } __attribute__((packed, aligned(4))); /* * brief the data structure of SSP Completion Response * use to indicate a SSP Completion (n bytes) */ struct ssp_completion_resp { __le32 tag; __le32 status; __le32 param; __le32 ssptag_rescv_rescpad; struct ssp_response_iu ssp_resp_iu; __le32 residual_count; } __attribute__((packed, aligned(4))); #define SSP_RESCV_BIT 0x00010000 /* * brief the data structure of SATA EVNET esponse * use to indicate a SATA Completion (64 bytes) */ struct sata_event_resp { __le32 tag; __le32 event; __le32 port_id; __le32 device_id; u32 reserved[11]; } __attribute__((packed, aligned(4))); /* * brief the data structure of SSP EVNET esponse * use to indicate a SSP Completion (64 bytes) */ struct ssp_event_resp { __le32 tag; __le32 event; __le32 port_id; __le32 device_id; u32 reserved[11]; } __attribute__((packed, aligned(4))); /** * brief the data structure of General Event Notification Response * use to describe MPI General Event Notification Response (64 bytes) */ struct general_event_resp { __le32 status; __le32 inb_IOMB_payload[14]; } __attribute__((packed, aligned(4))); #define GENERAL_EVENT_PAYLOAD 14 #define OPCODE_BITS 0x00000fff /* * brief the data structure of SMP Request Command * use to describe MPI SMP REQUEST Command (64 bytes) */ struct smp_req { __le32 tag; __le32 device_id; __le32 len_ip_ir; /* Bits [0] - Indirect response */ /* Bits [1] - Indirect Payload */ /* Bits [15:2] - Reserved */ /* Bits [23:16] - direct payload Len */ /* Bits [31:24] - Reserved */ u8 smp_req16[16]; union { u8 smp_req[32]; struct { __le64 long_req_addr;/* sg dma address, LE */ __le32 long_req_size;/* LE */ u32 _r_a; __le64 long_resp_addr;/* sg dma address, LE */ __le32 long_resp_size;/* LE */ u32 _r_b; } long_smp_req;/* sequencer extension */ }; } __attribute__((packed, aligned(4))); /* * brief the data structure of SMP Completion Response * use to describe MPI SMP Completion Response (64 bytes) */ struct smp_completion_resp { __le32 tag; __le32 status; __le32 param; __le32 _r_a[12]; } __attribute__((packed, aligned(4))); /* *brief the data structure of SSP SMP SATA Abort Command * use to describe MPI SSP SMP & SATA Abort Command (64 bytes) */ struct task_abort_req { __le32 tag; __le32 device_id; __le32 tag_to_abort; __le32 abort_all; u32 reserved[11]; } __attribute__((packed, aligned(4))); /* These flags used for SSP SMP & SATA Abort */ #define ABORT_MASK 0x3 #define ABORT_SINGLE 0x0 #define ABORT_ALL 0x1 /** * brief the data structure of SSP SATA SMP Abort Response * use to describe SSP SMP & SATA Abort Response ( 64 bytes) */ struct task_abort_resp { __le32 tag; __le32 status; __le32 scp; u32 reserved[12]; } __attribute__((packed, aligned(4))); /** * brief the data structure of SAS Diagnostic Start/End Command * use to describe MPI SAS Diagnostic Start/End Command (64 bytes) */ struct sas_diag_start_end_req { __le32 tag; __le32 operation_phyid; u32 reserved[13]; } __attribute__((packed, aligned(4))); /** * brief the data structure of SAS Diagnostic Execute Command * use to describe MPI SAS Diagnostic Execute Command (64 bytes) */ struct sas_diag_execute_req{ __le32 tag; __le32 cmdtype_cmddesc_phyid; __le32 pat1_pat2; __le32 threshold; __le32 codepat_errmsk; __le32 pmon; __le32 pERF1CTL; u32 reserved[8]; } __attribute__((packed, aligned(4))); #define SAS_DIAG_PARAM_BYTES 24 /* * brief the data structure of Set Device State Command * use to describe MPI Set Device State Command (64 bytes) */ struct set_dev_state_req { __le32 tag; __le32 device_id; __le32 nds; u32 reserved[12]; } __attribute__((packed, aligned(4))); /* * brief the data structure of sas_re_initialization */ struct sas_re_initialization_req { __le32 tag; __le32 SSAHOLT;/* bit29-set max port; ** bit28-set open reject cmd retries. ** bit27-set open reject data retries. ** bit26-set open reject option, remap:1 or not:0. ** bit25-set sata head of line time out. */ __le32 reserved_maxPorts; __le32 open_reject_cmdretries_data_retries;/* cmd retries: 31-bit16; * data retries: bit15-bit0. */ __le32 sata_hol_tmo; u32 reserved1[10]; } __attribute__((packed, aligned(4))); /* * brief the data structure of SATA Start Command * use to describe MPI SATA IO Start Command (64 bytes) */ struct sata_start_req { __le32 tag; __le32 device_id; __le32 data_len; __le32 ncqtag_atap_dir_m; struct host_to_dev_fis sata_fis; u32 reserved1; u32 reserved2; u32 addr_low; u32 addr_high; __le32 len; __le32 esgl; } __attribute__((packed, aligned(4))); /** * brief the data structure of SSP INI TM Start Command * use to describe MPI SSP INI TM Start Command (64 bytes) */ struct ssp_ini_tm_start_req { __le32 tag; __le32 device_id; __le32 relate_tag; __le32 tmf; u8 lun[8]; __le32 ds_ads_m; u32 reserved[8]; } __attribute__((packed, aligned(4))); struct ssp_info_unit { u8 lun[8];/* SCSI Logical Unit Number */ u8 reserved1;/* reserved */ u8 efb_prio_attr; /* B7 : enabledFirstBurst */ /* B6-3 : taskPriority */ /* B2-0 : taskAttribute */ u8 reserved2; /* reserved */ u8 additional_cdb_len; /* B7-2 : additional_cdb_len */ /* B1-0 : reserved */ u8 cdb[16];/* The SCSI CDB up to 16 bytes length */ } __attribute__((packed, aligned(4))); /** * brief the data structure of SSP INI IO Start Command * use to describe MPI SSP INI IO Start Command (64 bytes) */ struct ssp_ini_io_start_req { __le32 tag; __le32 device_id; __le32 data_len; __le32 dir_m_tlr; struct ssp_info_unit ssp_iu; __le32 addr_low; __le32 addr_high; __le32 len; __le32 esgl; } __attribute__((packed, aligned(4))); /** * brief the data structure of Firmware download * use to describe MPI FW DOWNLOAD Command (64 bytes) */ struct fw_flash_Update_req { __le32 tag; __le32 cur_image_offset; __le32 cur_image_len; __le32 total_image_len; u32 reserved0[7]; __le32 sgl_addr_lo; __le32 sgl_addr_hi; __le32 len; __le32 ext_reserved; } __attribute__((packed, aligned(4))); #define FWFLASH_IOMB_RESERVED_LEN 0x07 /** * brief the data structure of FW_FLASH_UPDATE Response * use to describe MPI FW_FLASH_UPDATE Response (64 bytes) * */ struct fw_flash_Update_resp { __le32 tag; __le32 status; u32 reserved[13]; } __attribute__((packed, aligned(4))); /** * brief the data structure of Get NVM Data Command * use to get data from NVM in HBA(64 bytes) */ struct get_nvm_data_req { __le32 tag; __le32 len_ir_vpdd; __le32 vpd_offset; u32 reserved[8]; __le32 resp_addr_lo; __le32 resp_addr_hi; __le32 resp_len; u32 reserved1; } __attribute__((packed, aligned(4))); struct set_nvm_data_req { __le32 tag; __le32 len_ir_vpdd; __le32 vpd_offset; __le32 reserved[8]; __le32 resp_addr_lo; __le32 resp_addr_hi; __le32 resp_len; u32 reserved1; } __attribute__((packed, aligned(4))); #define TWI_DEVICE 0x0 #define C_SEEPROM 0x1 #define VPD_FLASH 0x4 #define AAP1_RDUMP 0x5 #define IOP_RDUMP 0x6 #define EXPAN_ROM 0x7 #define IPMode 0x80000000 #define NVMD_TYPE 0x0000000F #define NVMD_STAT 0x0000FFFF #define NVMD_LEN 0xFF000000 /** * brief the data structure of Get NVMD Data Response * use to describe MPI Get NVMD Data Response (64 bytes) */ struct get_nvm_data_resp { __le32 tag; __le32 ir_tda_bn_dps_das_nvm; __le32 dlen_status; __le32 nvm_data[12]; } __attribute__((packed, aligned(4))); /** * brief the data structure of SAS Diagnostic Start/End Response * use to describe MPI SAS Diagnostic Start/End Response (64 bytes) * */ struct sas_diag_start_end_resp { __le32 tag; __le32 status; u32 reserved[13]; } __attribute__((packed, aligned(4))); /** * brief the data structure of SAS Diagnostic Execute Response * use to describe MPI SAS Diagnostic Execute Response (64 bytes) * */ struct sas_diag_execute_resp { __le32 tag; __le32 cmdtype_cmddesc_phyid; __le32 Status; __le32 ReportData; u32 reserved[11]; } __attribute__((packed, aligned(4))); /** * brief the data structure of Set Device State Response * use to describe MPI Set Device State Response (64 bytes) * */ struct set_dev_state_resp { __le32 tag; __le32 status; __le32 device_id; __le32 pds_nds; u32 reserved[11]; } __attribute__((packed, aligned(4))); #define NDS_BITS 0x0F #define PDS_BITS 0xF0 /* * HW Events type */ #define HW_EVENT_RESET_START 0x01 #define HW_EVENT_CHIP_RESET_COMPLETE 0x02 #define HW_EVENT_PHY_STOP_STATUS 0x03 #define HW_EVENT_SAS_PHY_UP 0x04 #define HW_EVENT_SATA_PHY_UP 0x05 #define HW_EVENT_SATA_SPINUP_HOLD 0x06 #define HW_EVENT_PHY_DOWN 0x07 #define HW_EVENT_PORT_INVALID 0x08 #define HW_EVENT_BROADCAST_CHANGE 0x09 #define HW_EVENT_PHY_ERROR 0x0A #define HW_EVENT_BROADCAST_SES 0x0B #define HW_EVENT_INBOUND_CRC_ERROR 0x0C #define HW_EVENT_HARD_RESET_RECEIVED 0x0D #define HW_EVENT_MALFUNCTION 0x0E #define HW_EVENT_ID_FRAME_TIMEOUT 0x0F #define HW_EVENT_BROADCAST_EXP 0x10 #define HW_EVENT_PHY_START_STATUS 0x11 #define HW_EVENT_LINK_ERR_INVALID_DWORD 0x12 #define HW_EVENT_LINK_ERR_DISPARITY_ERROR 0x13 #define HW_EVENT_LINK_ERR_CODE_VIOLATION 0x14 #define HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH 0x15 #define HW_EVENT_LINK_ERR_PHY_RESET_FAILED 0x16 #define HW_EVENT_PORT_RECOVERY_TIMER_TMO 0x17 #define HW_EVENT_PORT_RECOVER 0x18 #define HW_EVENT_PORT_RESET_TIMER_TMO 0x19 #define HW_EVENT_PORT_RESET_COMPLETE 0x20 #define EVENT_BROADCAST_ASYNCH_EVENT 0x21 /* port state */ #define PORT_NOT_ESTABLISHED 0x00 #define PORT_VALID 0x01 #define PORT_LOSTCOMM 0x02 #define PORT_IN_RESET 0x04 #define PORT_INVALID 0x08 /* * SSP/SMP/SATA IO Completion Status values */ #define IO_SUCCESS 0x00 #define IO_ABORTED 0x01 #define IO_OVERFLOW 0x02 #define IO_UNDERFLOW 0x03 #define IO_FAILED 0x04 #define IO_ABORT_RESET 0x05 #define IO_NOT_VALID 0x06 #define IO_NO_DEVICE 0x07 #define IO_ILLEGAL_PARAMETER 0x08 #define IO_LINK_FAILURE 0x09 #define IO_PROG_ERROR 0x0A #define IO_EDC_IN_ERROR 0x0B #define IO_EDC_OUT_ERROR 0x0C #define IO_ERROR_HW_TIMEOUT 0x0D #define IO_XFER_ERROR_BREAK 0x0E #define IO_XFER_ERROR_PHY_NOT_READY 0x0F #define IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED 0x10 #define IO_OPEN_CNX_ERROR_ZONE_VIOLATION 0x11 #define IO_OPEN_CNX_ERROR_BREAK 0x12 #define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS 0x13 #define IO_OPEN_CNX_ERROR_BAD_DESTINATION 0x14 #define IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED 0x15 #define IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY 0x16 #define IO_OPEN_CNX_ERROR_WRONG_DESTINATION 0x17 #define IO_OPEN_CNX_ERROR_UNKNOWN_ERROR 0x18 #define IO_XFER_ERROR_NAK_RECEIVED 0x19 #define IO_XFER_ERROR_ACK_NAK_TIMEOUT 0x1A #define IO_XFER_ERROR_PEER_ABORTED 0x1B #define IO_XFER_ERROR_RX_FRAME 0x1C #define IO_XFER_ERROR_DMA 0x1D #define IO_XFER_ERROR_CREDIT_TIMEOUT 0x1E #define IO_XFER_ERROR_SATA_LINK_TIMEOUT 0x1F #define IO_XFER_ERROR_SATA 0x20 #define IO_XFER_ERROR_ABORTED_DUE_TO_SRST 0x22 #define IO_XFER_ERROR_REJECTED_NCQ_MODE 0x21 #define IO_XFER_ERROR_ABORTED_NCQ_MODE 0x23 #define IO_XFER_OPEN_RETRY_TIMEOUT 0x24 #define IO_XFER_SMP_RESP_CONNECTION_ERROR 0x25 #define IO_XFER_ERROR_UNEXPECTED_PHASE 0x26 #define IO_XFER_ERROR_XFER_RDY_OVERRUN 0x27 #define IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED 0x28 #define IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT 0x30 #define IO_XFER_ERROR_CMD_ISSUE_BREAK_BEFORE_ACK_NAK 0x31 #define IO_XFER_ERROR_CMD_ISSUE_PHY_DOWN_BEFORE_ACK_NAK 0x32 #define IO_XFER_ERROR_OFFSET_MISMATCH 0x34 #define IO_XFER_ERROR_XFER_ZERO_DATA_LEN 0x35 #define IO_XFER_CMD_FRAME_ISSUED 0x36 #define IO_ERROR_INTERNAL_SMP_RESOURCE 0x37 #define IO_PORT_IN_RESET 0x38 #define IO_DS_NON_OPERATIONAL 0x39 #define IO_DS_IN_RECOVERY 0x3A #define IO_TM_TAG_NOT_FOUND 0x3B #define IO_XFER_PIO_SETUP_ERROR 0x3C #define IO_SSP_EXT_IU_ZERO_LEN_ERROR 0x3D #define IO_DS_IN_ERROR 0x3E #define IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY 0x3F #define IO_ABORT_IN_PROGRESS 0x40 #define IO_ABORT_DELAYED 0x41 #define IO_INVALID_LENGTH 0x42 /* WARNING: This error code must always be the last number. * If you add error code, modify this code also * It is used as an index */ #define IO_ERROR_UNKNOWN_GENERIC 0x43 /* MSGU CONFIGURATION TABLE*/ #define SPC_MSGU_CFG_TABLE_UPDATE 0x01/* Inbound doorbell bit0 */ #define SPC_MSGU_CFG_TABLE_RESET 0x02/* Inbound doorbell bit1 */ #define SPC_MSGU_CFG_TABLE_FREEZE 0x04/* Inbound doorbell bit2 */ #define SPC_MSGU_CFG_TABLE_UNFREEZE 0x08/* Inbound doorbell bit4 */ #define MSGU_IBDB_SET 0x04 #define MSGU_HOST_INT_STATUS 0x08 #define MSGU_HOST_INT_MASK 0x0C #define MSGU_IOPIB_INT_STATUS 0x18 #define MSGU_IOPIB_INT_MASK 0x1C #define MSGU_IBDB_CLEAR 0x20/* RevB - Host not use */ #define MSGU_MSGU_CONTROL 0x24 #define MSGU_ODR 0x3C/* RevB */ #define MSGU_ODCR 0x40/* RevB */ #define MSGU_SCRATCH_PAD_0 0x44 #define MSGU_SCRATCH_PAD_1 0x48 #define MSGU_SCRATCH_PAD_2 0x4C #define MSGU_SCRATCH_PAD_3 0x50 #define MSGU_HOST_SCRATCH_PAD_0 0x54 #define MSGU_HOST_SCRATCH_PAD_1 0x58 #define MSGU_HOST_SCRATCH_PAD_2 0x5C #define MSGU_HOST_SCRATCH_PAD_3 0x60 #define MSGU_HOST_SCRATCH_PAD_4 0x64 #define MSGU_HOST_SCRATCH_PAD_5 0x68 #define MSGU_HOST_SCRATCH_PAD_6 0x6C #define MSGU_HOST_SCRATCH_PAD_7 0x70 #define MSGU_ODMR 0x74/* RevB */ /* bit definition for ODMR register */ #define ODMR_MASK_ALL 0xFFFFFFFF/* mask all interrupt vector */ #define ODMR_CLEAR_ALL 0/* clear all interrupt vector */ /* bit definition for ODCR register */ #define ODCR_CLEAR_ALL 0xFFFFFFFF /* mask all interrupt vector*/ /* MSIX Interupts */ #define MSIX_TABLE_OFFSET 0x2000 #define MSIX_TABLE_ELEMENT_SIZE 0x10 #define MSIX_INTERRUPT_CONTROL_OFFSET 0xC #define MSIX_TABLE_BASE (MSIX_TABLE_OFFSET + MSIX_INTERRUPT_CONTROL_OFFSET) #define MSIX_INTERRUPT_DISABLE 0x1 #define MSIX_INTERRUPT_ENABLE 0x0 /* state definition for Scratch Pad1 register */ #define SCRATCH_PAD1_POR 0x00 /* power on reset state */ #define SCRATCH_PAD1_SFR 0x01 /* soft reset state */ #define SCRATCH_PAD1_ERR 0x02 /* error state */ #define SCRATCH_PAD1_RDY 0x03 /* ready state */ #define SCRATCH_PAD1_RST 0x04 /* soft reset toggle flag */ #define SCRATCH_PAD1_AAP1RDY_RST 0x08 /* AAP1 ready for soft reset */ #define SCRATCH_PAD1_STATE_MASK 0xFFFFFFF0 /* ScratchPad1 Mask, bit1-0 State, bit2 Soft Reset, bit3 FW RDY for Soft Reset */ #define SCRATCH_PAD1_RESERVED 0x000003F8 /* Scratch Pad1 Reserved bit 3 to 9 */ /* state definition for Scratch Pad2 register */ #define SCRATCH_PAD2_POR 0x00 /* power on state */ #define SCRATCH_PAD2_SFR 0x01 /* soft reset state */ #define SCRATCH_PAD2_ERR 0x02 /* error state */ #define SCRATCH_PAD2_RDY 0x03 /* ready state */ #define SCRATCH_PAD2_FWRDY_RST 0x04 /* FW ready for soft reset flag*/ #define SCRATCH_PAD2_IOPRDY_RST 0x08 /* IOP ready for soft reset */ #define SCRATCH_PAD2_STATE_MASK 0xFFFFFFF4 /* ScratchPad 2 Mask, bit1-0 State */ #define SCRATCH_PAD2_RESERVED 0x000003FC /* Scratch Pad1 Reserved bit 2 to 9 */ #define SCRATCH_PAD_ERROR_MASK 0xFFFFFC00 /* Error mask bits */ #define SCRATCH_PAD_STATE_MASK 0x00000003 /* State Mask bits */ /* main configuration offset - byte offset */ #define MAIN_SIGNATURE_OFFSET 0x00/* DWORD 0x00 */ #define MAIN_INTERFACE_REVISION 0x04/* DWORD 0x01 */ #define MAIN_FW_REVISION 0x08/* DWORD 0x02 */ #define MAIN_MAX_OUTSTANDING_IO_OFFSET 0x0C/* DWORD 0x03 */ #define MAIN_MAX_SGL_OFFSET 0x10/* DWORD 0x04 */ #define MAIN_CNTRL_CAP_OFFSET 0x14/* DWORD 0x05 */ #define MAIN_GST_OFFSET 0x18/* DWORD 0x06 */ #define MAIN_IBQ_OFFSET 0x1C/* DWORD 0x07 */ #define MAIN_OBQ_OFFSET 0x20/* DWORD 0x08 */ #define MAIN_IQNPPD_HPPD_OFFSET 0x24/* DWORD 0x09 */ #define MAIN_OB_HW_EVENT_PID03_OFFSET 0x28/* DWORD 0x0A */ #define MAIN_OB_HW_EVENT_PID47_OFFSET 0x2C/* DWORD 0x0B */ #define MAIN_OB_NCQ_EVENT_PID03_OFFSET 0x30/* DWORD 0x0C */ #define MAIN_OB_NCQ_EVENT_PID47_OFFSET 0x34/* DWORD 0x0D */ #define MAIN_TITNX_EVENT_PID03_OFFSET 0x38/* DWORD 0x0E */ #define MAIN_TITNX_EVENT_PID47_OFFSET 0x3C/* DWORD 0x0F */ #define MAIN_OB_SSP_EVENT_PID03_OFFSET 0x40/* DWORD 0x10 */ #define MAIN_OB_SSP_EVENT_PID47_OFFSET 0x44/* DWORD 0x11 */ #define MAIN_OB_SMP_EVENT_PID03_OFFSET 0x48/* DWORD 0x12 */ #define MAIN_OB_SMP_EVENT_PID47_OFFSET 0x4C/* DWORD 0x13 */ #define MAIN_EVENT_LOG_ADDR_HI 0x50/* DWORD 0x14 */ #define MAIN_EVENT_LOG_ADDR_LO 0x54/* DWORD 0x15 */ #define MAIN_EVENT_LOG_BUFF_SIZE 0x58/* DWORD 0x16 */ #define MAIN_EVENT_LOG_OPTION 0x5C/* DWORD 0x17 */ #define MAIN_IOP_EVENT_LOG_ADDR_HI 0x60/* DWORD 0x18 */ #define MAIN_IOP_EVENT_LOG_ADDR_LO 0x64/* DWORD 0x19 */ #define MAIN_IOP_EVENT_LOG_BUFF_SIZE 0x68/* DWORD 0x1A */ #define MAIN_IOP_EVENT_LOG_OPTION 0x6C/* DWORD 0x1B */ #define MAIN_FATAL_ERROR_INTERRUPT 0x70/* DWORD 0x1C */ #define MAIN_FATAL_ERROR_RDUMP0_OFFSET 0x74/* DWORD 0x1D */ #define MAIN_FATAL_ERROR_RDUMP0_LENGTH 0x78/* DWORD 0x1E */ #define MAIN_FATAL_ERROR_RDUMP1_OFFSET 0x7C/* DWORD 0x1F */ #define MAIN_FATAL_ERROR_RDUMP1_LENGTH 0x80/* DWORD 0x20 */ #define MAIN_HDA_FLAGS_OFFSET 0x84/* DWORD 0x21 */ #define MAIN_ANALOG_SETUP_OFFSET 0x88/* DWORD 0x22 */ /* Gereral Status Table offset - byte offset */ #define GST_GSTLEN_MPIS_OFFSET 0x00 #define GST_IQ_FREEZE_STATE0_OFFSET 0x04 #define GST_IQ_FREEZE_STATE1_OFFSET 0x08 #define GST_MSGUTCNT_OFFSET 0x0C #define GST_IOPTCNT_OFFSET 0x10 #define GST_PHYSTATE_OFFSET 0x18 #define GST_PHYSTATE0_OFFSET 0x18 #define GST_PHYSTATE1_OFFSET 0x1C #define GST_PHYSTATE2_OFFSET 0x20 #define GST_PHYSTATE3_OFFSET 0x24 #define GST_PHYSTATE4_OFFSET 0x28 #define GST_PHYSTATE5_OFFSET 0x2C #define GST_PHYSTATE6_OFFSET 0x30 #define GST_PHYSTATE7_OFFSET 0x34 #define GST_RERRINFO_OFFSET 0x44 /* General Status Table - MPI state */ #define GST_MPI_STATE_UNINIT 0x00 #define GST_MPI_STATE_INIT 0x01 #define GST_MPI_STATE_TERMINATION 0x02 #define GST_MPI_STATE_ERROR 0x03 #define GST_MPI_STATE_MASK 0x07 #define MBIC_NMI_ENABLE_VPE0_IOP 0x000418 #define MBIC_NMI_ENABLE_VPE0_AAP1 0x000418 /* PCIE registers - BAR2(0x18), BAR1(win) 0x010000 */ #define PCIE_EVENT_INTERRUPT_ENABLE 0x003040 #define PCIE_EVENT_INTERRUPT 0x003044 #define PCIE_ERROR_INTERRUPT_ENABLE 0x003048 #define PCIE_ERROR_INTERRUPT 0x00304C /* signature definition for host scratch pad0 register */ #define SPC_SOFT_RESET_SIGNATURE 0x252acbcd /* Signature for Soft Reset */ /* SPC Reset register - BAR4(0x20), BAR2(win) (need dynamic mapping) */ #define SPC_REG_RESET 0x000000/* reset register */ /* bit difination for SPC_RESET register */ #define SPC_REG_RESET_OSSP 0x00000001 #define SPC_REG_RESET_RAAE 0x00000002 #define SPC_REG_RESET_PCS_SPBC 0x00000004 #define SPC_REG_RESET_PCS_IOP_SS 0x00000008 #define SPC_REG_RESET_PCS_AAP1_SS 0x00000010 #define SPC_REG_RESET_PCS_AAP2_SS 0x00000020 #define SPC_REG_RESET_PCS_LM 0x00000040 #define SPC_REG_RESET_PCS 0x00000080 #define SPC_REG_RESET_GSM 0x00000100 #define SPC_REG_RESET_DDR2 0x00010000 #define SPC_REG_RESET_BDMA_CORE 0x00020000 #define SPC_REG_RESET_BDMA_SXCBI 0x00040000 #define SPC_REG_RESET_PCIE_AL_SXCBI 0x00080000 #define SPC_REG_RESET_PCIE_PWR 0x00100000 #define SPC_REG_RESET_PCIE_SFT 0x00200000 #define SPC_REG_RESET_PCS_SXCBI 0x00400000 #define SPC_REG_RESET_LMS_SXCBI 0x00800000 #define SPC_REG_RESET_PMIC_SXCBI 0x01000000 #define SPC_REG_RESET_PMIC_CORE 0x02000000 #define SPC_REG_RESET_PCIE_PC_SXCBI 0x04000000 #define SPC_REG_RESET_DEVICE 0x80000000 /* registers for BAR Shifting - BAR2(0x18), BAR1(win) */ #define SPC_IBW_AXI_TRANSLATION_LOW 0x003258 #define MBIC_AAP1_ADDR_BASE 0x060000 #define MBIC_IOP_ADDR_BASE 0x070000 #define GSM_ADDR_BASE 0x0700000 /* Dynamic map through Bar4 - 0x00700000 */ #define GSM_CONFIG_RESET 0x00000000 #define RAM_ECC_DB_ERR 0x00000018 #define GSM_READ_ADDR_PARITY_INDIC 0x00000058 #define GSM_WRITE_ADDR_PARITY_INDIC 0x00000060 #define GSM_WRITE_DATA_PARITY_INDIC 0x00000068 #define GSM_READ_ADDR_PARITY_CHECK 0x00000038 #define GSM_WRITE_ADDR_PARITY_CHECK 0x00000040 #define GSM_WRITE_DATA_PARITY_CHECK 0x00000048 #define RB6_ACCESS_REG 0x6A0000 #define HDAC_EXEC_CMD 0x0002 #define HDA_C_PA 0xcb #define HDA_SEQ_ID_BITS 0x00ff0000 #define HDA_GSM_OFFSET_BITS 0x00FFFFFF #define MBIC_AAP1_ADDR_BASE 0x060000 #define MBIC_IOP_ADDR_BASE 0x070000 #define GSM_ADDR_BASE 0x0700000 #define SPC_TOP_LEVEL_ADDR_BASE 0x000000 #define GSM_CONFIG_RESET_VALUE 0x00003b00 #define GPIO_ADDR_BASE 0x00090000 #define GPIO_GPIO_0_0UTPUT_CTL_OFFSET 0x0000010c /* RB6 offset */ #define SPC_RB6_OFFSET 0x80C0 /* Magic number of soft reset for RB6 */ #define RB6_MAGIC_NUMBER_RST 0x1234 /* Device Register status */ #define DEVREG_SUCCESS 0x00 #define DEVREG_FAILURE_OUT_OF_RESOURCE 0x01 #define DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED 0x02 #define DEVREG_FAILURE_INVALID_PHY_ID 0x03 #define DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED 0x04 #define DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE 0x05 #define DEVREG_FAILURE_PORT_NOT_VALID_STATE 0x06 #define DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID 0x07 #define GSM_BASE 0x4F0000 #define SHIFT_REG_64K_MASK 0xffff0000 #define SHIFT_REG_BIT_SHIFT 8 #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1