| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Larry Finger | 2359 | 97.04% | 1 | 8.33% |
| Aastha Gupta | 59 | 2.43% | 3 | 25.00% |
| Michael Straube | 4 | 0.16% | 2 | 16.67% |
| Aishwarya Pant | 3 | 0.12% | 2 | 16.67% |
| Ivan Safonov | 2 | 0.08% | 1 | 8.33% |
| Luca Ceresoli | 2 | 0.08% | 1 | 8.33% |
| Nishka Dasgupta | 1 | 0.04% | 1 | 8.33% |
| Paul Gortmaker | 1 | 0.04% | 1 | 8.33% |
| Total | 2431 | 12 |
/* SPDX-License-Identifier: GPL-2.0 */ /****************************************************************************** * * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. * ******************************************************************************/ #ifndef __IEEE80211_H #define __IEEE80211_H #include <osdep_service.h> #include <drv_types.h> #include "wifi.h" #include <linux/wireless.h> #ifdef CONFIG_88EU_AP_MODE #define RTL_IOCTL_HOSTAPD (SIOCIWFIRSTPRIV + 28) /* RTL871X_IOCTL_HOSTAPD ioctl() cmd: */ enum { RTL871X_HOSTAPD_FLUSH = 1, RTL871X_HOSTAPD_ADD_STA = 2, RTL871X_HOSTAPD_REMOVE_STA = 3, RTL871X_HOSTAPD_GET_INFO_STA = 4, /* REMOVED: PRISM2_HOSTAPD_RESET_TXEXC_STA = 5, */ RTL871X_HOSTAPD_GET_WPAIE_STA = 5, RTL871X_SET_ENCRYPTION = 6, RTL871X_GET_ENCRYPTION = 7, RTL871X_HOSTAPD_SET_FLAGS_STA = 8, RTL871X_HOSTAPD_GET_RID = 9, RTL871X_HOSTAPD_SET_RID = 10, RTL871X_HOSTAPD_SET_ASSOC_AP_ADDR = 11, RTL871X_HOSTAPD_SET_GENERIC_ELEMENT = 12, RTL871X_HOSTAPD_MLME = 13, RTL871X_HOSTAPD_SCAN_REQ = 14, RTL871X_HOSTAPD_STA_CLEAR_STATS = 15, RTL871X_HOSTAPD_SET_BEACON = 16, RTL871X_HOSTAPD_SET_WPS_BEACON = 17, RTL871X_HOSTAPD_SET_WPS_PROBE_RESP = 18, RTL871X_HOSTAPD_SET_WPS_ASSOC_RESP = 19, RTL871X_HOSTAPD_SET_HIDDEN_SSID = 20, RTL871X_HOSTAPD_SET_MACADDR_ACL = 21, RTL871X_HOSTAPD_ACL_ADD_STA = 22, RTL871X_HOSTAPD_ACL_REMOVE_STA = 23, }; /* STA flags */ #define WLAN_STA_AUTH BIT(0) #define WLAN_STA_ASSOC BIT(1) #define WLAN_STA_PS BIT(2) #define WLAN_STA_TIM BIT(3) #define WLAN_STA_PERM BIT(4) #define WLAN_STA_AUTHORIZED BIT(5) #define WLAN_STA_PENDING_POLL BIT(6) /* pending activity poll not ACKed */ #define WLAN_STA_SHORT_PREAMBLE BIT(7) #define WLAN_STA_PREAUTH BIT(8) #define WLAN_STA_WME BIT(9) #define WLAN_STA_MFP BIT(10) #define WLAN_STA_HT BIT(11) #define WLAN_STA_WPS BIT(12) #define WLAN_STA_MAYBE_WPS BIT(13) #define WLAN_STA_NONERP BIT(31) #endif #define IEEE_CMD_SET_WPA_PARAM 1 #define IEEE_CMD_SET_WPA_IE 2 #define IEEE_CMD_SET_ENCRYPTION 3 #define IEEE_CMD_MLME 4 #define IEEE_PARAM_WPA_ENABLED 1 #define IEEE_PARAM_TKIP_COUNTERMEASURES 2 #define IEEE_PARAM_DROP_UNENCRYPTED 3 #define IEEE_PARAM_PRIVACY_INVOKED 4 #define IEEE_PARAM_AUTH_ALGS 5 #define IEEE_PARAM_IEEE_802_1X 6 #define IEEE_PARAM_WPAX_SELECT 7 #define AUTH_ALG_OPEN_SYSTEM 0x1 #define AUTH_ALG_SHARED_KEY 0x2 #define AUTH_ALG_LEAP 0x00000004 #define IEEE_MLME_STA_DEAUTH 1 #define IEEE_MLME_STA_DISASSOC 2 #define IEEE_CRYPT_ERR_UNKNOWN_ALG 2 #define IEEE_CRYPT_ERR_UNKNOWN_ADDR 3 #define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4 #define IEEE_CRYPT_ERR_KEY_SET_FAILED 5 #define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6 #define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7 #define IEEE_CRYPT_ALG_NAME_LEN 16 #define WPA_CIPHER_NONE BIT(0) #define WPA_CIPHER_WEP40 BIT(1) #define WPA_CIPHER_WEP104 BIT(2) #define WPA_CIPHER_TKIP BIT(3) #define WPA_CIPHER_CCMP BIT(4) #define WPA_SELECTOR_LEN 4 extern u8 RTW_WPA_OUI_TYPE[]; extern u8 WPA_AUTH_KEY_MGMT_NONE[]; extern u8 WPA_AUTH_KEY_MGMT_UNSPEC_802_1X[]; extern u8 WPA_AUTH_KEY_MGMT_PSK_OVER_802_1X[]; extern u8 WPA_CIPHER_SUITE_NONE[]; extern u8 WPA_CIPHER_SUITE_WEP40[]; extern u8 WPA_CIPHER_SUITE_TKIP[]; extern u8 WPA_CIPHER_SUITE_WRAP[]; extern u8 WPA_CIPHER_SUITE_CCMP[]; extern u8 WPA_CIPHER_SUITE_WEP104[]; #define RSN_HEADER_LEN 4 #define RSN_SELECTOR_LEN 4 extern u16 RSN_VERSION_BSD; extern u8 RSN_AUTH_KEY_MGMT_UNSPEC_802_1X[]; extern u8 RSN_AUTH_KEY_MGMT_PSK_OVER_802_1X[]; extern u8 RSN_CIPHER_SUITE_NONE[]; extern u8 RSN_CIPHER_SUITE_WEP40[]; extern u8 RSN_CIPHER_SUITE_TKIP[]; extern u8 RSN_CIPHER_SUITE_WRAP[]; extern u8 RSN_CIPHER_SUITE_CCMP[]; extern u8 RSN_CIPHER_SUITE_WEP104[]; enum ratr_table_mode { RATR_INX_WIRELESS_NGB = 0, /* BGN 40 Mhz 2SS 1SS */ RATR_INX_WIRELESS_NG = 1, /* GN or N */ RATR_INX_WIRELESS_NB = 2, /* BGN 20 Mhz 2SS 1SS or BN */ RATR_INX_WIRELESS_N = 3, RATR_INX_WIRELESS_GB = 4, RATR_INX_WIRELESS_G = 5, RATR_INX_WIRELESS_B = 6, RATR_INX_WIRELESS_MC = 7, RATR_INX_WIRELESS_AC_N = 8, }; enum NETWORK_TYPE { WIRELESS_INVALID = 0, /* Sub-Element */ WIRELESS_11B = BIT(0), /* tx:cck only, rx:cck only, hw: cck */ WIRELESS_11G = BIT(1), /* tx:ofdm only, rx:ofdm & cck, hw:cck & ofdm*/ WIRELESS_11A = BIT(2), /* tx:ofdm only, rx: ofdm only, hw:ofdm only */ WIRELESS_11_24N = BIT(3), /* tx:MCS only, rx:MCS & cck, hw:MCS & cck */ WIRELESS_11_5N = BIT(4), /* tx:MCS only, rx:MCS & ofdm, hw:ofdm only */ WIRELESS_AC = BIT(6), /* Combination */ /* tx: cck & ofdm, rx: cck & ofdm & MCS, hw: cck & ofdm */ WIRELESS_11BG = (WIRELESS_11B | WIRELESS_11G), /* tx: ofdm & MCS, rx: ofdm & cck & MCS, hw: cck & ofdm */ WIRELESS_11G_24N = (WIRELESS_11G | WIRELESS_11_24N), /* tx: ofdm & MCS, rx: ofdm & MCS, hw: ofdm only */ WIRELESS_11A_5N = (WIRELESS_11A | WIRELESS_11_5N), /* tx: ofdm & cck & MCS, rx: ofdm & cck & MCS, hw: ofdm & cck */ WIRELESS_11BG_24N = (WIRELESS_11B | WIRELESS_11G | WIRELESS_11_24N), /* tx: ofdm & MCS, rx: ofdm & MCS, hw: ofdm only */ WIRELESS_11AGN = (WIRELESS_11A | WIRELESS_11G | WIRELESS_11_24N | WIRELESS_11_5N), WIRELESS_11ABGN = (WIRELESS_11A | WIRELESS_11B | WIRELESS_11G | WIRELESS_11_24N | WIRELESS_11_5N), }; #define SUPPORTED_24G_NETTYPE_MSK \ (WIRELESS_11B | WIRELESS_11G | WIRELESS_11_24N) #define SUPPORTED_5G_NETTYPE_MSK \ (WIRELESS_11A | WIRELESS_11_5N) #define IsSupported24G(NetType) \ ((NetType) & SUPPORTED_24G_NETTYPE_MSK ? true : false) #define IsSupported5G(NetType) \ ((NetType) & SUPPORTED_5G_NETTYPE_MSK ? true : false) #define IsEnableHWCCK(NetType) \ IsSupported24G(NetType) #define IsEnableHWOFDM(NetType) \ ((NetType) & (WIRELESS_11G | WIRELESS_11_24N | \ SUPPORTED_5G_NETTYPE_MSK) ? true : false) #define IsSupportedRxCCK(NetType) IsEnableHWCCK(NetType) #define IsSupportedRxOFDM(NetType) IsEnableHWOFDM(NetType) #define IsSupportedRxMCS(NetType) IsEnableHWOFDM(NetType) #define IsSupportedTxCCK(NetType) \ ((NetType) & (WIRELESS_11B) ? true : false) #define IsSupportedTxOFDM(NetType) \ ((NetType) & (WIRELESS_11G | WIRELESS_11A) ? true : false) #define IsSupportedTxMCS(NetType) \ ((NetType) & (WIRELESS_11_24N | WIRELESS_11_5N) ? true : false) struct ieee_param { u32 cmd; u8 sta_addr[ETH_ALEN]; union { struct { u8 name; u32 value; } wpa_param; struct { u32 len; u8 reserved[32]; u8 data[0]; } wpa_ie; struct { int command; int reason_code; } mlme; struct { u8 alg[IEEE_CRYPT_ALG_NAME_LEN]; u8 set_tx; u32 err; u8 idx; u8 seq[8]; /* sequence counter (set: RX, get: TX) */ u16 key_len; u8 key[0]; } crypt; #ifdef CONFIG_88EU_AP_MODE struct { u16 aid; u16 capability; int flags; u8 tx_supp_rates[16]; struct ieee80211_ht_cap ht_cap; } add_sta; struct { u8 reserved[2];/* for set max_num_sta */ u8 buf[0]; } bcn_ie; #endif } u; }; #ifdef CONFIG_88EU_AP_MODE struct ieee_param_ex { u32 cmd; u8 sta_addr[ETH_ALEN]; u8 data[0]; }; struct sta_data { u16 aid; u16 capability; int flags; u32 sta_set; u8 tx_supp_rates[16]; u32 tx_supp_rates_len; struct ieee80211_ht_cap ht_cap; u64 rx_pkts; u64 rx_bytes; u64 rx_drops; u64 tx_pkts; u64 tx_bytes; u64 tx_drops; }; #endif #define IEEE80211_DATA_LEN 2304 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section * 6.2.1.1.2. * The figure in section 7.1.2 suggests a body size of up to 2312 * bytes is allowed, which is a bit confusing, I suspect this * represents the 2304 bytes of real data, plus a possible 8 bytes of * WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ #define IEEE80211_HLEN 30 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) /* this is stolen from ipw2200 driver */ #define IEEE_IBSS_MAC_HASH_SIZE 31 enum eap_type { EAP_PACKET = 0, EAPOL_START, EAPOL_LOGOFF, EAPOL_KEY, EAPOL_ENCAP_ASF_ALERT }; #define IEEE80211_3ADDR_LEN 24 #define IEEE80211_4ADDR_LEN 30 #define IEEE80211_FCS_LEN 4 #define MIN_FRAG_THRESHOLD 256U #define MAX_FRAG_THRESHOLD 2346U /* sequence control field */ #define RTW_IEEE80211_SCTL_FRAG 0x000F #define RTW_IEEE80211_SCTL_SEQ 0xFFF0 #define RTW_ERP_INFO_NON_ERP_PRESENT BIT(0) #define RTW_ERP_INFO_USE_PROTECTION BIT(1) #define RTW_ERP_INFO_BARKER_PREAMBLE_MODE BIT(2) /* QoS, QOS */ #define NORMAL_ACK 0 #define NO_ACK 1 #define NON_EXPLICIT_ACK 2 #define BLOCK_ACK 3 #ifndef ETH_P_PAE #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ #endif /* ETH_P_PAE */ #define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */ #define ETH_P_ECONET 0x0018 #ifndef ETH_P_80211_RAW #define ETH_P_80211_RAW (ETH_P_ECONET + 1) #endif /* IEEE 802.11 defines */ #define P80211_OUI_LEN 3 struct ieee80211_snap_hdr { u8 dsap; /* always 0xAA */ u8 ssap; /* always 0xAA */ u8 ctrl; /* always 0x03 */ u8 oui[P80211_OUI_LEN]; /* organizational universal id */ } __packed; #define SNAP_SIZE sizeof(struct ieee80211_snap_hdr) #define WLAN_QC_GET_TID(qc) ((qc) & 0x0f) #define WLAN_GET_SEQ_FRAG(seq) ((seq) & RTW_IEEE80211_SCTL_FRAG) #define WLAN_GET_SEQ_SEQ(seq) ((seq) & RTW_IEEE80211_SCTL_SEQ) /* Non standard? Not in <linux/ieee80211.h> */ #define WLAN_REASON_EXPIRATION_CHK 65535 #define IEEE80211_MGMT_HDR_LEN 24 #define IEEE80211_DATA_HDR3_LEN 24 #define IEEE80211_DATA_HDR4_LEN 30 #define IEEE80211_CCK_MODULATION BIT(0) #define IEEE80211_OFDM_MODULATION BIT(1) #define IEEE80211_24GHZ_BAND BIT(0) #define IEEE80211_52GHZ_BAND BIT(1) #define IEEE80211_CCK_RATE_LEN 4 #define IEEE80211_NUM_OFDM_RATESLEN 8 #define IEEE80211_CCK_RATE_1MB 0x02 #define IEEE80211_CCK_RATE_2MB 0x04 #define IEEE80211_CCK_RATE_5MB 0x0B #define IEEE80211_CCK_RATE_11MB 0x16 #define IEEE80211_OFDM_RATE_LEN 8 #define IEEE80211_OFDM_RATE_6MB 0x0C #define IEEE80211_OFDM_RATE_9MB 0x12 #define IEEE80211_OFDM_RATE_12MB 0x18 #define IEEE80211_OFDM_RATE_18MB 0x24 #define IEEE80211_OFDM_RATE_24MB 0x30 #define IEEE80211_OFDM_RATE_36MB 0x48 #define IEEE80211_OFDM_RATE_48MB 0x60 #define IEEE80211_OFDM_RATE_54MB 0x6C #define IEEE80211_BASIC_RATE_MASK 0x80 #define IEEE80211_CCK_RATE_1MB_MASK BIT(0) #define IEEE80211_CCK_RATE_2MB_MASK BIT(1) #define IEEE80211_CCK_RATE_5MB_MASK BIT(2) #define IEEE80211_CCK_RATE_11MB_MASK BIT(3) #define IEEE80211_OFDM_RATE_6MB_MASK BIT(4) #define IEEE80211_OFDM_RATE_9MB_MASK BIT(5) #define IEEE80211_OFDM_RATE_12MB_MASK BIT(6) #define IEEE80211_OFDM_RATE_18MB_MASK BIT(7) #define IEEE80211_OFDM_RATE_24MB_MASK BIT(8) #define IEEE80211_OFDM_RATE_36MB_MASK BIT(9) #define IEEE80211_OFDM_RATE_48MB_MASK BIT(10) #define IEEE80211_OFDM_RATE_54MB_MASK BIT(11) #define IEEE80211_CCK_RATES_MASK 0x0000000F #define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \ IEEE80211_CCK_RATE_2MB_MASK) #define IEEE80211_CCK_DEFAULT_RATES_MASK \ (IEEE80211_CCK_BASIC_RATES_MASK | \ IEEE80211_CCK_RATE_5MB_MASK | \ IEEE80211_CCK_RATE_11MB_MASK) #define IEEE80211_OFDM_RATES_MASK 0x00000FF0 #define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \ IEEE80211_OFDM_RATE_12MB_MASK | \ IEEE80211_OFDM_RATE_24MB_MASK) #define IEEE80211_OFDM_DEFAULT_RATES_MASK \ (IEEE80211_OFDM_BASIC_RATES_MASK | \ IEEE80211_OFDM_RATE_9MB_MASK | \ IEEE80211_OFDM_RATE_18MB_MASK | \ IEEE80211_OFDM_RATE_36MB_MASK | \ IEEE80211_OFDM_RATE_48MB_MASK | \ IEEE80211_OFDM_RATE_54MB_MASK) #define IEEE80211_NUM_OFDM_RATES 8 #define IEEE80211_NUM_CCK_RATES 4 #define IEEE80211_OFDM_SHIFT_MASK_A 4 /* IEEE 802.11 requires that STA supports concurrent reception of at least * three fragmented frames. This define can be increased to support more * concurrent frames, but it should be noted that each entry can consume about * 2 kB of RAM and increasing cache size will slow down frame reassembly. */ #define IEEE80211_FRAG_CACHE_LEN 4 #define SEC_KEY_1 BIT(0) #define SEC_KEY_2 BIT(1) #define SEC_KEY_3 BIT(2) #define SEC_KEY_4 BIT(3) #define SEC_ACTIVE_KEY BIT(4) #define SEC_AUTH_MODE BIT(5) #define SEC_UNICAST_GROUP BIT(6) #define SEC_LEVEL BIT(7) #define SEC_ENABLED BIT(8) #define SEC_LEVEL_0 0 /* None */ #define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */ #define SEC_LEVEL_2 2 /* Level 1 + TKIP */ #define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */ #define SEC_LEVEL_3 4 /* Level 2 + CCMP */ #define WEP_KEYS 4 #define WEP_KEY_LEN 13 /* SWEEP TABLE ENTRIES NUMBER*/ #define MAX_SWEEP_TAB_ENTRIES 42 #define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7 /* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs * only use 8, and then use extended rates for the remaining supported * rates. Other APs, however, stick all of their supported rates on the * main rates information element... */ #define MAX_RATES_LENGTH ((u8)12) #define MAX_RATES_EX_LENGTH ((u8)16) #define MAX_NETWORK_COUNT 128 #define MAX_CHANNEL_NUMBER 161 #define IEEE80211_SOFTMAC_SCAN_TIME 400 /* HZ / 2) */ #define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2) #define CRC_LENGTH 4U #define MAX_WPA_IE_LEN (256) #define MAX_WPS_IE_LEN (512) #define MAX_P2P_IE_LEN (256) #define MAX_WFD_IE_LEN (128) #define NETWORK_EMPTY_ESSID BIT(0) #define NETWORK_HAS_OFDM BIT(1) #define NETWORK_HAS_CCK BIT(2) #define IW_ESSID_MAX_SIZE 32 /* * join_res: * -1: authentication fail * -2: association fail * > 0: TID */ enum ieee80211_state { /* the card is not linked at all */ IEEE80211_NOLINK = 0, /* IEEE80211_ASSOCIATING* are for BSS client mode * the driver shall not perform RX filtering unless * the state is LINKED. * The driver shall just check for the state LINKED and * defaults to NOLINK for ALL the other states (including * LINKED_SCANNING) */ /* the association procedure will start (wq scheduling)*/ IEEE80211_ASSOCIATING, IEEE80211_ASSOCIATING_RETRY, /* the association procedure is sending AUTH request*/ IEEE80211_ASSOCIATING_AUTHENTICATING, /* the association procedure has successfully authentcated * and is sending association request */ IEEE80211_ASSOCIATING_AUTHENTICATED, /* the link is ok. the card associated to a BSS or linked * to a ibss cell or acting as an AP and creating the bss */ IEEE80211_LINKED, /* same as LINKED, but the driver shall apply RX filter * rules as we are in NO_LINK mode. As the card is still * logically linked, but it is doing a syncro site survey * then it will be back to LINKED state. */ IEEE80211_LINKED_SCANNING, }; #define DEFAULT_MAX_SCAN_AGE (15 * HZ) #define DEFAULT_FTS 2346 #define CFG_IEEE80211_RESERVE_FCS BIT(0) #define CFG_IEEE80211_COMPUTE_FCS BIT(1) #define MAXTID 16 #define IEEE_A BIT(0) #define IEEE_B BIT(1) #define IEEE_G BIT(2) #define IEEE_MODE_MASK (IEEE_A | IEEE_B | IEEE_G) /* Action category code */ enum rtw_ieee80211_category { RTW_WLAN_CATEGORY_SPECTRUM_MGMT = 0, RTW_WLAN_CATEGORY_QOS = 1, RTW_WLAN_CATEGORY_DLS = 2, RTW_WLAN_CATEGORY_BACK = 3, RTW_WLAN_CATEGORY_PUBLIC = 4, /* IEEE 802.11 public action frames */ RTW_WLAN_CATEGORY_RADIO_MEASUREMENT = 5, RTW_WLAN_CATEGORY_FT = 6, RTW_WLAN_CATEGORY_HT = 7, RTW_WLAN_CATEGORY_SA_QUERY = 8, RTW_WLAN_CATEGORY_TDLS = 12, RTW_WLAN_CATEGORY_WMM = 17, RTW_WLAN_CATEGORY_P2P = 0x7f,/* P2P action frames */ }; /* SPECTRUM_MGMT action code */ enum rtw_ieee80211_spectrum_mgmt_actioncode { RTW_WLAN_ACTION_SPCT_MSR_REQ = 0, RTW_WLAN_ACTION_SPCT_MSR_RPRT = 1, RTW_WLAN_ACTION_SPCT_TPC_REQ = 2, RTW_WLAN_ACTION_SPCT_TPC_RPRT = 3, RTW_WLAN_ACTION_SPCT_CHL_SWITCH = 4, RTW_WLAN_ACTION_SPCT_EXT_CHL_SWITCH = 5, }; enum _PUBLIC_ACTION { ACT_PUBLIC_BSSCOEXIST = 0, /* 20/40 BSS Coexistence */ ACT_PUBLIC_DSE_ENABLE = 1, ACT_PUBLIC_DSE_DEENABLE = 2, ACT_PUBLIC_DSE_REG_LOCATION = 3, ACT_PUBLIC_EXT_CHL_SWITCH = 4, ACT_PUBLIC_DSE_MSR_REQ = 5, ACT_PUBLIC_DSE_MSR_RPRT = 6, ACT_PUBLIC_MP = 7, /* Measurement Pilot */ ACT_PUBLIC_DSE_PWR_CONSTRAINT = 8, ACT_PUBLIC_VENDOR = 9, /* for WIFI_DIRECT */ ACT_PUBLIC_GAS_INITIAL_REQ = 10, ACT_PUBLIC_GAS_INITIAL_RSP = 11, ACT_PUBLIC_GAS_COMEBACK_REQ = 12, ACT_PUBLIC_GAS_COMEBACK_RSP = 13, ACT_PUBLIC_TDLS_DISCOVERY_RSP = 14, ACT_PUBLIC_LOCATION_TRACK = 15, ACT_PUBLIC_MAX }; /* BACK action code */ enum rtw_ieee80211_back_actioncode { RTW_WLAN_ACTION_ADDBA_REQ = 0, RTW_WLAN_ACTION_ADDBA_RESP = 1, RTW_WLAN_ACTION_DELBA = 2, }; /* HT features action code */ enum rtw_ieee80211_ht_actioncode { RTW_WLAN_ACTION_NOTIFY_CH_WIDTH = 0, RTW_WLAN_ACTION_SM_PS = 1, RTW_WLAN_ACTION_PSPM = 2, RTW_WLAN_ACTION_PCO_PHASE = 3, RTW_WLAN_ACTION_MIMO_CSI_MX = 4, RTW_WLAN_ACTION_MIMO_NONCP_BF = 5, RTW_WLAN_ACTION_MIMP_CP_BF = 6, RTW_WLAN_ACTION_ASEL_INDICATES_FB = 7, RTW_WLAN_ACTION_HI_INFO_EXCHG = 8, }; /* BACK (block-ack) parties */ enum rtw_ieee80211_back_parties { RTW_WLAN_BACK_RECIPIENT = 0, RTW_WLAN_BACK_INITIATOR = 1, RTW_WLAN_BACK_TIMER = 2, }; #define OUI_MICROSOFT 0x0050f2 /* Microsoft (also used in Wi-Fi specs) * 00:50:F2 */ #define WME_OUI_TYPE 2 #define WME_OUI_SUBTYPE_INFORMATION_ELEMENT 0 #define WME_OUI_SUBTYPE_PARAMETER_ELEMENT 1 #define WME_OUI_SUBTYPE_TSPEC_ELEMENT 2 #define WME_VERSION 1 #define WME_ACTION_CODE_SETUP_REQUEST 0 #define WME_ACTION_CODE_SETUP_RESPONSE 1 #define WME_ACTION_CODE_TEARDOWN 2 #define WME_SETUP_RESPONSE_STATUS_ADMISSION_ACCEPTED 0 #define WME_SETUP_RESPONSE_STATUS_INVALID_PARAMETERS 1 #define WME_SETUP_RESPONSE_STATUS_REFUSED 3 #define WME_TSPEC_DIRECTION_UPLINK 0 #define WME_TSPEC_DIRECTION_DOWNLINK 1 #define WME_TSPEC_DIRECTION_BI_DIRECTIONAL 3 #define OUI_BROADCOM 0x00904c /* Broadcom (Epigram) */ #define VENDOR_HT_CAPAB_OUI_TYPE 0x33 /* 00-90-4c:0x33 */ /** * enum rtw_ieee80211_channel_flags - channel flags * * Channel flags set by the regulatory control code. * * @RTW_IEEE80211_CHAN_DISABLED: This channel is disabled. * @RTW_IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted * on this channel. * @RTW_IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel. * @RTW_IEEE80211_CHAN_RADAR: Radar detection is required on this channel. * @RTW_IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel * is not permitted. * @RTW_IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel * is not permitted. */ enum rtw_ieee80211_channel_flags { RTW_IEEE80211_CHAN_DISABLED = BIT(0), RTW_IEEE80211_CHAN_PASSIVE_SCAN = BIT(1), RTW_IEEE80211_CHAN_NO_IBSS = BIT(2), RTW_IEEE80211_CHAN_RADAR = BIT(3), RTW_IEEE80211_CHAN_NO_HT40PLUS = BIT(4), RTW_IEEE80211_CHAN_NO_HT40MINUS = BIT(5), }; #define RTW_IEEE80211_CHAN_NO_HT40 \ (RTW_IEEE80211_CHAN_NO_HT40PLUS | RTW_IEEE80211_CHAN_NO_HT40MINUS) /* Represent channel details, subset of ieee80211_channel */ struct rtw_ieee80211_channel { u16 hw_value; u32 flags; }; #define CHAN_FMT \ "hw_value:%u, " \ "flags:0x%08x" \ #define CHAN_ARG(channel) \ (channel)->hw_value \ , (channel)->flags \ /* Parsed Information Elements */ struct rtw_ieee802_11_elems { u8 *ssid; u8 ssid_len; u8 *supp_rates; u8 supp_rates_len; u8 *fh_params; u8 fh_params_len; u8 *ds_params; u8 ds_params_len; u8 *cf_params; u8 cf_params_len; u8 *tim; u8 tim_len; u8 *ibss_params; u8 ibss_params_len; u8 *challenge; u8 challenge_len; u8 *erp_info; u8 erp_info_len; u8 *ext_supp_rates; u8 ext_supp_rates_len; u8 *wpa_ie; u8 wpa_ie_len; u8 *rsn_ie; u8 rsn_ie_len; u8 *wme; u8 wme_len; u8 *wme_tspec; u8 wme_tspec_len; u8 *wps_ie; u8 wps_ie_len; u8 *power_cap; u8 power_cap_len; u8 *supp_channels; u8 supp_channels_len; u8 *mdie; u8 mdie_len; u8 *ftie; u8 ftie_len; u8 *timeout_int; u8 timeout_int_len; u8 *ht_capabilities; u8 ht_capabilities_len; u8 *ht_operation; u8 ht_operation_len; u8 *vendor_ht_cap; u8 vendor_ht_cap_len; }; enum parse_res { ParseOK = 0, ParseUnknown = 1, ParseFailed = -1 }; enum parse_res rtw_ieee802_11_parse_elems(u8 *start, uint len, struct rtw_ieee802_11_elems *elems, int show_errors); u8 *rtw_set_fixed_ie(void *pbuf, unsigned int len, void *source, unsigned int *frlen); u8 *rtw_set_ie(u8 *pbuf, int index, uint len, u8 *source, uint *frlen); enum secondary_ch_offset { SCN = 0, /* no secondary channel */ SCA = 1, /* secondary channel above */ SCB = 3, /* secondary channel below */ }; u8 *rtw_get_ie(u8 *pbuf, int index, uint *len, int limit); void rtw_set_supported_rate(u8 *SupportedRates, uint mode); unsigned char *rtw_get_wpa_ie(unsigned char *pie, uint *wpa_ie_len, int limit); unsigned char *rtw_get_wpa2_ie(unsigned char *pie, uint *rsn_ie_len, int limit); int rtw_get_wpa_cipher_suite(u8 *s); int rtw_get_wpa2_cipher_suite(u8 *s); int rtw_get_wapi_ie(u8 *in_ie, uint in_len, u8 *wapi_ie, u16 *wapi_len); int rtw_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwise_cipher, int *is_8021x); int rtw_parse_wpa2_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher, int *pairwise_cipher, int *is_8021x); void rtw_get_sec_ie(u8 *in_ie, uint in_len, u8 *rsn_ie, u16 *rsn_len, u8 *wpa_ie, u16 *wpa_len); u8 rtw_is_wps_ie(u8 *ie_ptr, uint *wps_ielen); u8 *rtw_get_wps_ie(u8 *in_ie, uint in_len, u8 *wps_ie, uint *wps_ielen); u8 *rtw_get_wps_attr(u8 *wps_ie, uint wps_ielen, u16 target_attr_id, u8 *buf_attr, u32 *len_attr); u8 *rtw_get_wps_attr_content(u8 *wps_ie, uint wps_ielen, u16 target_attr_id, u8 *buf_content, uint *len_content); uint rtw_get_rateset_len(u8 *rateset); struct registry_priv; int rtw_generate_ie(struct registry_priv *pregistrypriv); int rtw_get_bit_value_from_ieee_value(u8 val); bool rtw_is_cckrates_included(u8 *rate); bool rtw_is_cckratesonly_included(u8 *rate); int rtw_check_network_type(unsigned char *rate); void rtw_get_bcn_info(struct wlan_network *pnetwork); void rtw_macaddr_cfg(u8 *mac_addr); u16 rtw_mcs_rate(u8 rf_type, u8 bw_40MHz, u8 short_GI_20, u8 short_GI_40, unsigned char *MCS_rate); #endif /* IEEE80211_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1