Contributors: 19
Author Tokens Token Proportion Commits Commit Proportion
Greg Kroah-Hartman 3811 82.74% 2 5.88%
Solomon Peachy 315 6.84% 3 8.82%
Vitaly Osipov 164 3.56% 1 2.94%
Haneen Mohammed 80 1.74% 1 2.94%
Tim Collier 61 1.32% 2 5.88%
Sergio Paracuellos 47 1.02% 9 26.47%
Dan Carpenter 24 0.52% 2 5.88%
Edgardo Hames 20 0.43% 1 2.94%
sayli karnik 20 0.43% 1 2.94%
Moritz Mühlenhoff 18 0.39% 3 8.82%
Karl Relton 16 0.35% 1 2.94%
Jeshwanth Kumar N K 9 0.20% 1 2.94%
Johannes Stadlinger 8 0.17% 1 2.94%
Himangi Saraogi 8 0.17% 1 2.94%
Rehas Sachdeva 1 0.02% 1 2.94%
Tormod Volden 1 0.02% 1 2.94%
Suniel Mahesh 1 0.02% 1 2.94%
Andrew Elwell 1 0.02% 1 2.94%
Colin Ian King 1 0.02% 1 2.94%
Total 4606 34


// SPDX-License-Identifier: (GPL-2.0 OR MPL-1.1)
/* src/prism2/driver/prism2mgmt.c
 *
 * Management request handler functions.
 *
 * Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
 * --------------------------------------------------------------------
 *
 * linux-wlan
 *
 *   The contents of this file are subject to the Mozilla Public
 *   License Version 1.1 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.mozilla.org/MPL/
 *
 *   Software distributed under the License is distributed on an "AS
 *   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
 *   implied. See the License for the specific language governing
 *   rights and limitations under the License.
 *
 *   Alternatively, the contents of this file may be used under the
 *   terms of the GNU Public License version 2 (the "GPL"), in which
 *   case the provisions of the GPL are applicable instead of the
 *   above.  If you wish to allow the use of your version of this file
 *   only under the terms of the GPL and not to allow others to use
 *   your version of this file under the MPL, indicate your decision
 *   by deleting the provisions above and replace them with the notice
 *   and other provisions required by the GPL.  If you do not delete
 *   the provisions above, a recipient may use your version of this
 *   file under either the MPL or the GPL.
 *
 * --------------------------------------------------------------------
 *
 * Inquiries regarding the linux-wlan Open Source project can be
 * made directly to:
 *
 * AbsoluteValue Systems Inc.
 * info@linux-wlan.com
 * http://www.linux-wlan.com
 *
 * --------------------------------------------------------------------
 *
 * Portions of the development of this software were funded by
 * Intersil Corporation as part of PRISM(R) chipset product development.
 *
 * --------------------------------------------------------------------
 *
 * The functions in this file handle management requests sent from
 * user mode.
 *
 * Most of these functions have two separate blocks of code that are
 * conditional on whether this is a station or an AP.  This is used
 * to separate out the STA and AP responses to these management primitives.
 * It's a choice (good, bad, indifferent?) to have the code in the same
 * place so it's clear that the same primitive is implemented in both
 * cases but has different behavior.
 *
 * --------------------------------------------------------------------
 */

#include <linux/if_arp.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/wait.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/wireless.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <asm/byteorder.h>
#include <linux/random.h>
#include <linux/usb.h>
#include <linux/bitops.h>

#include "p80211types.h"
#include "p80211hdr.h"
#include "p80211mgmt.h"
#include "p80211conv.h"
#include "p80211msg.h"
#include "p80211netdev.h"
#include "p80211metadef.h"
#include "p80211metastruct.h"
#include "hfa384x.h"
#include "prism2mgmt.h"

/* Converts 802.11 format rate specifications to prism2 */
static inline u16 p80211rate_to_p2bit(u32 rate)
{
	switch (rate & ~BIT(7)) {
	case 2:
		return BIT(0);
	case 4:
		return BIT(1);
	case 11:
		return BIT(2);
	case 22:
		return BIT(3);
	default:
		return 0;
	}
}

/*----------------------------------------------------------------
 * prism2mgmt_scan
 *
 * Initiate a scan for BSSs.
 *
 * This function corresponds to MLME-scan.request and part of
 * MLME-scan.confirm.  As far as I can tell in the standard, there
 * are no restrictions on when a scan.request may be issued.  We have
 * to handle in whatever state the driver/MAC happen to be.
 *
 * Arguments:
 *	wlandev		wlan device structure
 *	msgp		ptr to msg buffer
 *
 * Returns:
 *	0	success and done
 *	<0	success, but we're waiting for something to finish.
 *	>0	an error occurred while handling the message.
 * Side effects:
 *
 * Call context:
 *	process thread  (usually)
 *	interrupt
 *----------------------------------------------------------------
 */
int prism2mgmt_scan(struct wlandevice *wlandev, void *msgp)
{
	int result = 0;
	struct hfa384x *hw = wlandev->priv;
	struct p80211msg_dot11req_scan *msg = msgp;
	u16 roamingmode, word;
	int i, timeout;
	int istmpenable = 0;

	struct hfa384x_host_scan_request_data scanreq;

	/* gatekeeper check */
	if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
				     hw->ident_sta_fw.minor,
				     hw->ident_sta_fw.variant) <
	    HFA384x_FIRMWARE_VERSION(1, 3, 2)) {
		netdev_err(wlandev->netdev,
			   "HostScan not supported with current firmware (<1.3.2).\n");
		result = 1;
		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
		goto exit;
	}

	memset(&scanreq, 0, sizeof(scanreq));

	/* save current roaming mode */
	result = hfa384x_drvr_getconfig16(hw,
					  HFA384x_RID_CNFROAMINGMODE,
					  &roamingmode);
	if (result) {
		netdev_err(wlandev->netdev,
			   "getconfig(ROAMMODE) failed. result=%d\n", result);
		msg->resultcode.data =
		    P80211ENUM_resultcode_implementation_failure;
		goto exit;
	}

	/* drop into mode 3 for the scan */
	result = hfa384x_drvr_setconfig16(hw,
					  HFA384x_RID_CNFROAMINGMODE,
					  HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
	if (result) {
		netdev_err(wlandev->netdev,
			   "setconfig(ROAMINGMODE) failed. result=%d\n",
			   result);
		msg->resultcode.data =
		    P80211ENUM_resultcode_implementation_failure;
		goto exit;
	}

	/* active or passive? */
	if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
				     hw->ident_sta_fw.minor,
				     hw->ident_sta_fw.variant) >
	    HFA384x_FIRMWARE_VERSION(1, 5, 0)) {
		if (msg->scantype.data != P80211ENUM_scantype_active)
			word = msg->maxchanneltime.data;
		else
			word = 0;

		result =
		    hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPASSIVESCANCTRL,
					     word);
		if (result) {
			netdev_warn(wlandev->netdev,
				    "Passive scan not supported with current firmware.  (<1.5.1)\n");
		}
	}

	/* set up the txrate to be 2MBPS. Should be fastest basicrate... */
	word = HFA384x_RATEBIT_2;
	scanreq.tx_rate = cpu_to_le16(word);

	/* set up the channel list */
	word = 0;
	for (i = 0; i < msg->channellist.data.len; i++) {
		u8 channel = msg->channellist.data.data[i];

		if (channel > 14)
			continue;
		/* channel 1 is BIT 0 ... channel 14 is BIT 13 */
		word |= (1 << (channel - 1));
	}
	scanreq.channel_list = cpu_to_le16(word);

	/* set up the ssid, if present. */
	scanreq.ssid.len = cpu_to_le16(msg->ssid.data.len);
	memcpy(scanreq.ssid.data, msg->ssid.data.data, msg->ssid.data.len);

	/* Enable the MAC port if it's not already enabled  */
	result = hfa384x_drvr_getconfig16(hw, HFA384x_RID_PORTSTATUS, &word);
	if (result) {
		netdev_err(wlandev->netdev,
			   "getconfig(PORTSTATUS) failed. result=%d\n", result);
		msg->resultcode.data =
		    P80211ENUM_resultcode_implementation_failure;
		goto exit;
	}
	if (word == HFA384x_PORTSTATUS_DISABLED) {
		__le16 wordbuf[17];

		result = hfa384x_drvr_setconfig16(hw,
					HFA384x_RID_CNFROAMINGMODE,
					HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
		if (result) {
			netdev_err(wlandev->netdev,
				   "setconfig(ROAMINGMODE) failed. result=%d\n",
				   result);
			msg->resultcode.data =
			    P80211ENUM_resultcode_implementation_failure;
			goto exit;
		}
		/* Construct a bogus SSID and assign it to OwnSSID and
		 * DesiredSSID
		 */
		wordbuf[0] = cpu_to_le16(WLAN_SSID_MAXLEN);
		get_random_bytes(&wordbuf[1], WLAN_SSID_MAXLEN);
		result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFOWNSSID,
						wordbuf,
						HFA384x_RID_CNFOWNSSID_LEN);
		if (result) {
			netdev_err(wlandev->netdev, "Failed to set OwnSSID.\n");
			msg->resultcode.data =
			    P80211ENUM_resultcode_implementation_failure;
			goto exit;
		}
		result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
						wordbuf,
						HFA384x_RID_CNFDESIREDSSID_LEN);
		if (result) {
			netdev_err(wlandev->netdev,
				   "Failed to set DesiredSSID.\n");
			msg->resultcode.data =
			    P80211ENUM_resultcode_implementation_failure;
			goto exit;
		}
		/* bsstype */
		result = hfa384x_drvr_setconfig16(hw,
						  HFA384x_RID_CNFPORTTYPE,
						  HFA384x_PORTTYPE_IBSS);
		if (result) {
			netdev_err(wlandev->netdev,
				   "Failed to set CNFPORTTYPE.\n");
			msg->resultcode.data =
			    P80211ENUM_resultcode_implementation_failure;
			goto exit;
		}
		/* ibss options */
		result = hfa384x_drvr_setconfig16(hw,
					HFA384x_RID_CREATEIBSS,
					HFA384x_CREATEIBSS_JOINCREATEIBSS);
		if (result) {
			netdev_err(wlandev->netdev,
				   "Failed to set CREATEIBSS.\n");
			msg->resultcode.data =
			    P80211ENUM_resultcode_implementation_failure;
			goto exit;
		}
		result = hfa384x_drvr_enable(hw, 0);
		if (result) {
			netdev_err(wlandev->netdev,
				   "drvr_enable(0) failed. result=%d\n",
				   result);
			msg->resultcode.data =
			    P80211ENUM_resultcode_implementation_failure;
			goto exit;
		}
		istmpenable = 1;
	}

	/* Figure out our timeout first Kus, then HZ */
	timeout = msg->channellist.data.len * msg->maxchanneltime.data;
	timeout = (timeout * HZ) / 1000;

	/* Issue the scan request */
	hw->scanflag = 0;

	result = hfa384x_drvr_setconfig(hw,
					HFA384x_RID_HOSTSCAN, &scanreq,
					sizeof(scanreq));
	if (result) {
		netdev_err(wlandev->netdev,
			   "setconfig(SCANREQUEST) failed. result=%d\n",
			   result);
		msg->resultcode.data =
		    P80211ENUM_resultcode_implementation_failure;
		goto exit;
	}

	/* sleep until info frame arrives */
	wait_event_interruptible_timeout(hw->cmdq, hw->scanflag, timeout);

	msg->numbss.status = P80211ENUM_msgitem_status_data_ok;
	if (hw->scanflag == -1)
		hw->scanflag = 0;

	msg->numbss.data = hw->scanflag;

	hw->scanflag = 0;

	/* Disable port if we temporarily enabled it. */
	if (istmpenable) {
		result = hfa384x_drvr_disable(hw, 0);
		if (result) {
			netdev_err(wlandev->netdev,
				   "drvr_disable(0) failed. result=%d\n",
				   result);
			msg->resultcode.data =
			    P80211ENUM_resultcode_implementation_failure;
			goto exit;
		}
	}

	/* restore original roaming mode */
	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFROAMINGMODE,
					  roamingmode);
	if (result) {
		netdev_err(wlandev->netdev,
			   "setconfig(ROAMMODE) failed. result=%d\n", result);
		msg->resultcode.data =
		    P80211ENUM_resultcode_implementation_failure;
		goto exit;
	}

	result = 0;
	msg->resultcode.data = P80211ENUM_resultcode_success;

exit:
	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;

	return result;
}

/*----------------------------------------------------------------
 * prism2mgmt_scan_results
 *
 * Retrieve the BSS description for one of the BSSs identified in
 * a scan.
 *
 * Arguments:
 *	wlandev		wlan device structure
 *	msgp		ptr to msg buffer
 *
 * Returns:
 *	0	success and done
 *	<0	success, but we're waiting for something to finish.
 *	>0	an error occurred while handling the message.
 * Side effects:
 *
 * Call context:
 *	process thread  (usually)
 *	interrupt
 *----------------------------------------------------------------
 */
int prism2mgmt_scan_results(struct wlandevice *wlandev, void *msgp)
{
	int result = 0;
	struct p80211msg_dot11req_scan_results *req;
	struct hfa384x *hw = wlandev->priv;
	struct hfa384x_hscan_result_sub *item = NULL;

	int count;

	req = msgp;

	req->resultcode.status = P80211ENUM_msgitem_status_data_ok;

	if (!hw->scanresults) {
		netdev_err(wlandev->netdev,
			   "dot11req_scan_results can only be used after a successful dot11req_scan.\n");
		result = 2;
		req->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
		goto exit;
	}

	count = (hw->scanresults->framelen - 3) / 32;
	if (count > HFA384x_SCANRESULT_MAX)
		count = HFA384x_SCANRESULT_MAX;

	if (req->bssindex.data >= count) {
		netdev_dbg(wlandev->netdev,
			   "requested index (%d) out of range (%d)\n",
			   req->bssindex.data, count);
		result = 2;
		req->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
		goto exit;
	}

	item = &hw->scanresults->info.hscanresult.result[req->bssindex.data];
	/* signal and noise */
	req->signal.status = P80211ENUM_msgitem_status_data_ok;
	req->noise.status = P80211ENUM_msgitem_status_data_ok;
	req->signal.data = le16_to_cpu(item->sl);
	req->noise.data = le16_to_cpu(item->anl);

	/* BSSID */
	req->bssid.status = P80211ENUM_msgitem_status_data_ok;
	req->bssid.data.len = WLAN_BSSID_LEN;
	memcpy(req->bssid.data.data, item->bssid, WLAN_BSSID_LEN);

	/* SSID */
	req->ssid.status = P80211ENUM_msgitem_status_data_ok;
	req->ssid.data.len = le16_to_cpu(item->ssid.len);
	req->ssid.data.len = min_t(u16, req->ssid.data.len, WLAN_SSID_MAXLEN);
	memcpy(req->ssid.data.data, item->ssid.data, req->ssid.data.len);

	/* supported rates */
	for (count = 0; count < 10; count++)
		if (item->supprates[count] == 0)
			break;

#define REQBASICRATE(N) \
	do { \
		if ((count >= (N)) && DOT11_RATE5_ISBASIC_GET(	\
			item->supprates[(N) - 1])) { \
			req->basicrate ## N .data = item->supprates[(N) - 1]; \
			req->basicrate ## N .status = \
				P80211ENUM_msgitem_status_data_ok; \
		} \
	} while (0)

	REQBASICRATE(1);
	REQBASICRATE(2);
	REQBASICRATE(3);
	REQBASICRATE(4);
	REQBASICRATE(5);
	REQBASICRATE(6);
	REQBASICRATE(7);
	REQBASICRATE(8);

#define REQSUPPRATE(N) \
	do { \
		if (count >= (N)) {					\
			req->supprate ## N .data = item->supprates[(N) - 1]; \
			req->supprate ## N .status = \
				P80211ENUM_msgitem_status_data_ok; \
		} \
	} while (0)

	REQSUPPRATE(1);
	REQSUPPRATE(2);
	REQSUPPRATE(3);
	REQSUPPRATE(4);
	REQSUPPRATE(5);
	REQSUPPRATE(6);
	REQSUPPRATE(7);
	REQSUPPRATE(8);

	/* beacon period */
	req->beaconperiod.status = P80211ENUM_msgitem_status_data_ok;
	req->beaconperiod.data = le16_to_cpu(item->bcnint);

	/* timestamps */
	req->timestamp.status = P80211ENUM_msgitem_status_data_ok;
	req->timestamp.data = jiffies;
	req->localtime.status = P80211ENUM_msgitem_status_data_ok;
	req->localtime.data = jiffies;

	/* atim window */
	req->ibssatimwindow.status = P80211ENUM_msgitem_status_data_ok;
	req->ibssatimwindow.data = le16_to_cpu(item->atim);

	/* Channel */
	req->dschannel.status = P80211ENUM_msgitem_status_data_ok;
	req->dschannel.data = le16_to_cpu(item->chid);

	/* capinfo bits */
	count = le16_to_cpu(item->capinfo);
	req->capinfo.status = P80211ENUM_msgitem_status_data_ok;
	req->capinfo.data = count;

	/* privacy flag */
	req->privacy.status = P80211ENUM_msgitem_status_data_ok;
	req->privacy.data = WLAN_GET_MGMT_CAP_INFO_PRIVACY(count);

	/* cfpollable */
	req->cfpollable.status = P80211ENUM_msgitem_status_data_ok;
	req->cfpollable.data = WLAN_GET_MGMT_CAP_INFO_CFPOLLABLE(count);

	/* cfpollreq */
	req->cfpollreq.status = P80211ENUM_msgitem_status_data_ok;
	req->cfpollreq.data = WLAN_GET_MGMT_CAP_INFO_CFPOLLREQ(count);

	/* bsstype */
	req->bsstype.status = P80211ENUM_msgitem_status_data_ok;
	req->bsstype.data = (WLAN_GET_MGMT_CAP_INFO_ESS(count)) ?
	    P80211ENUM_bsstype_infrastructure : P80211ENUM_bsstype_independent;

	result = 0;
	req->resultcode.data = P80211ENUM_resultcode_success;

exit:
	return result;
}

/*----------------------------------------------------------------
 * prism2mgmt_start
 *
 * Start a BSS.  Any station can do this for IBSS, only AP for ESS.
 *
 * Arguments:
 *	wlandev		wlan device structure
 *	msgp		ptr to msg buffer
 *
 * Returns:
 *	0	success and done
 *	<0	success, but we're waiting for something to finish.
 *	>0	an error occurred while handling the message.
 * Side effects:
 *
 * Call context:
 *	process thread  (usually)
 *	interrupt
 *----------------------------------------------------------------
 */
int prism2mgmt_start(struct wlandevice *wlandev, void *msgp)
{
	int result = 0;
	struct hfa384x *hw = wlandev->priv;
	struct p80211msg_dot11req_start *msg = msgp;

	struct p80211pstrd *pstr;
	u8 bytebuf[80];
	struct hfa384x_bytestr *p2bytestr = (struct hfa384x_bytestr *)bytebuf;
	u16 word;

	wlandev->macmode = WLAN_MACMODE_NONE;

	/* Set the SSID */
	memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));

	/*** ADHOC IBSS ***/
	/* see if current f/w is less than 8c3 */
	if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
				     hw->ident_sta_fw.minor,
				     hw->ident_sta_fw.variant) <
	    HFA384x_FIRMWARE_VERSION(0, 8, 3)) {
		/* Ad-Hoc not quite supported on Prism2 */
		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
		goto done;
	}

	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;

	/*** STATION ***/
	/* Set the REQUIRED config items */
	/* SSID */
	pstr = (struct p80211pstrd *)&msg->ssid.data;
	prism2mgmt_pstr2bytestr(p2bytestr, pstr);
	result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFOWNSSID,
					bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
	if (result) {
		netdev_err(wlandev->netdev, "Failed to set CnfOwnSSID\n");
		goto failed;
	}
	result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
					bytebuf,
					HFA384x_RID_CNFDESIREDSSID_LEN);
	if (result) {
		netdev_err(wlandev->netdev, "Failed to set CnfDesiredSSID\n");
		goto failed;
	}

	/* bsstype - we use the default in the ap firmware */
	/* IBSS port */
	hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 0);

	/* beacon period */
	word = msg->beaconperiod.data;
	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAPBCNINT, word);
	if (result) {
		netdev_err(wlandev->netdev,
			   "Failed to set beacon period=%d.\n", word);
		goto failed;
	}

	/* dschannel */
	word = msg->dschannel.data;
	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNCHANNEL, word);
	if (result) {
		netdev_err(wlandev->netdev,
			   "Failed to set channel=%d.\n", word);
		goto failed;
	}
	/* Basic rates */
	word = p80211rate_to_p2bit(msg->basicrate1.data);
	if (msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok)
		word |= p80211rate_to_p2bit(msg->basicrate2.data);

	if (msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok)
		word |= p80211rate_to_p2bit(msg->basicrate3.data);

	if (msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok)
		word |= p80211rate_to_p2bit(msg->basicrate4.data);

	if (msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok)
		word |= p80211rate_to_p2bit(msg->basicrate5.data);

	if (msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok)
		word |= p80211rate_to_p2bit(msg->basicrate6.data);

	if (msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok)
		word |= p80211rate_to_p2bit(msg->basicrate7.data);

	if (msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok)
		word |= p80211rate_to_p2bit(msg->basicrate8.data);

	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, word);
	if (result) {
		netdev_err(wlandev->netdev,
			   "Failed to set basicrates=%d.\n", word);
		goto failed;
	}

	/* Operational rates (supprates and txratecontrol) */
	word = p80211rate_to_p2bit(msg->operationalrate1.data);
	if (msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok)
		word |= p80211rate_to_p2bit(msg->operationalrate2.data);

	if (msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok)
		word |= p80211rate_to_p2bit(msg->operationalrate3.data);

	if (msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok)
		word |= p80211rate_to_p2bit(msg->operationalrate4.data);

	if (msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok)
		word |= p80211rate_to_p2bit(msg->operationalrate5.data);

	if (msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok)
		word |= p80211rate_to_p2bit(msg->operationalrate6.data);

	if (msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok)
		word |= p80211rate_to_p2bit(msg->operationalrate7.data);

	if (msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok)
		word |= p80211rate_to_p2bit(msg->operationalrate8.data);

	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, word);
	if (result) {
		netdev_err(wlandev->netdev,
			   "Failed to set supprates=%d.\n", word);
		goto failed;
	}

	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, word);
	if (result) {
		netdev_err(wlandev->netdev, "Failed to set txrates=%d.\n",
			   word);
		goto failed;
	}

	/* Set the macmode so the frame setup code knows what to do */
	if (msg->bsstype.data == P80211ENUM_bsstype_independent) {
		wlandev->macmode = WLAN_MACMODE_IBSS_STA;
		/* lets extend the data length a bit */
		hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN, 2304);
	}

	/* Enable the Port */
	result = hfa384x_drvr_enable(hw, 0);
	if (result) {
		netdev_err(wlandev->netdev,
			   "Enable macport failed, result=%d.\n", result);
		goto failed;
	}

	msg->resultcode.data = P80211ENUM_resultcode_success;

	goto done;
failed:
	netdev_dbg(wlandev->netdev,
		   "Failed to set a config option, result=%d\n", result);
	msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;

done:
	return 0;
}

/*----------------------------------------------------------------
 * prism2mgmt_readpda
 *
 * Collect the PDA data and put it in the message.
 *
 * Arguments:
 *	wlandev		wlan device structure
 *	msgp		ptr to msg buffer
 *
 * Returns:
 *	0	success and done
 *	<0	success, but we're waiting for something to finish.
 *	>0	an error occurred while handling the message.
 * Side effects:
 *
 * Call context:
 *	process thread  (usually)
 *----------------------------------------------------------------
 */
int prism2mgmt_readpda(struct wlandevice *wlandev, void *msgp)
{
	struct hfa384x *hw = wlandev->priv;
	struct p80211msg_p2req_readpda *msg = msgp;
	int result;

	/* We only support collecting the PDA when in the FWLOAD
	 * state.
	 */
	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
		netdev_err(wlandev->netdev,
			   "PDA may only be read in the fwload state.\n");
		msg->resultcode.data =
		    P80211ENUM_resultcode_implementation_failure;
		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
	} else {
		/*  Call drvr_readpda(), it handles the auxport enable
		 *  and validating the returned PDA.
		 */
		result = hfa384x_drvr_readpda(hw,
					      msg->pda.data,
					      HFA384x_PDA_LEN_MAX);
		if (result) {
			netdev_err(wlandev->netdev,
				   "hfa384x_drvr_readpda() failed, result=%d\n",
				   result);

			msg->resultcode.data =
			    P80211ENUM_resultcode_implementation_failure;
			msg->resultcode.status =
			    P80211ENUM_msgitem_status_data_ok;
			return 0;
		}
		msg->pda.status = P80211ENUM_msgitem_status_data_ok;
		msg->resultcode.data = P80211ENUM_resultcode_success;
		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
	}

	return 0;
}

/*----------------------------------------------------------------
 * prism2mgmt_ramdl_state
 *
 * Establishes the beginning/end of a card RAM download session.
 *
 * It is expected that the ramdl_write() function will be called
 * one or more times between the 'enable' and 'disable' calls to
 * this function.
 *
 * Note: This function should not be called when a mac comm port
 *       is active.
 *
 * Arguments:
 *	wlandev		wlan device structure
 *	msgp		ptr to msg buffer
 *
 * Returns:
 *	0	success and done
 *	<0	success, but we're waiting for something to finish.
 *	>0	an error occurred while handling the message.
 * Side effects:
 *
 * Call context:
 *	process thread  (usually)
 *----------------------------------------------------------------
 */
int prism2mgmt_ramdl_state(struct wlandevice *wlandev, void *msgp)
{
	struct hfa384x *hw = wlandev->priv;
	struct p80211msg_p2req_ramdl_state *msg = msgp;

	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
		netdev_err(wlandev->netdev,
			   "ramdl_state(): may only be called in the fwload state.\n");
		msg->resultcode.data =
		    P80211ENUM_resultcode_implementation_failure;
		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
		return 0;
	}

	/*
	 ** Note: Interrupts are locked out if this is an AP and are NOT
	 ** locked out if this is a station.
	 */

	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
	if (msg->enable.data == P80211ENUM_truth_true) {
		if (hfa384x_drvr_ramdl_enable(hw, msg->exeaddr.data)) {
			msg->resultcode.data =
			    P80211ENUM_resultcode_implementation_failure;
		} else {
			msg->resultcode.data = P80211ENUM_resultcode_success;
		}
	} else {
		hfa384x_drvr_ramdl_disable(hw);
		msg->resultcode.data = P80211ENUM_resultcode_success;
	}

	return 0;
}

/*----------------------------------------------------------------
 * prism2mgmt_ramdl_write
 *
 * Writes a buffer to the card RAM using the download state.  This
 * is for writing code to card RAM.  To just read or write raw data
 * use the aux functions.
 *
 * Arguments:
 *	wlandev		wlan device structure
 *	msgp		ptr to msg buffer
 *
 * Returns:
 *	0	success and done
 *	<0	success, but we're waiting for something to finish.
 *	>0	an error occurred while handling the message.
 * Side effects:
 *
 * Call context:
 *	process thread  (usually)
 *----------------------------------------------------------------
 */
int prism2mgmt_ramdl_write(struct wlandevice *wlandev, void *msgp)
{
	struct hfa384x *hw = wlandev->priv;
	struct p80211msg_p2req_ramdl_write *msg = msgp;
	u32 addr;
	u32 len;
	u8 *buf;

	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
		netdev_err(wlandev->netdev,
			   "ramdl_write(): may only be called in the fwload state.\n");
		msg->resultcode.data =
		    P80211ENUM_resultcode_implementation_failure;
		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
		return 0;
	}

	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
	/* first validate the length */
	if (msg->len.data > sizeof(msg->data.data)) {
		msg->resultcode.status =
		    P80211ENUM_resultcode_invalid_parameters;
		return 0;
	}
	/* call the hfa384x function to do the write */
	addr = msg->addr.data;
	len = msg->len.data;
	buf = msg->data.data;
	if (hfa384x_drvr_ramdl_write(hw, addr, buf, len))
		msg->resultcode.data = P80211ENUM_resultcode_refused;

	msg->resultcode.data = P80211ENUM_resultcode_success;

	return 0;
}

/*----------------------------------------------------------------
 * prism2mgmt_flashdl_state
 *
 * Establishes the beginning/end of a card Flash download session.
 *
 * It is expected that the flashdl_write() function will be called
 * one or more times between the 'enable' and 'disable' calls to
 * this function.
 *
 * Note: This function should not be called when a mac comm port
 *       is active.
 *
 * Arguments:
 *	wlandev		wlan device structure
 *	msgp		ptr to msg buffer
 *
 * Returns:
 *	0	success and done
 *	<0	success, but we're waiting for something to finish.
 *	>0	an error occurred while handling the message.
 * Side effects:
 *
 * Call context:
 *	process thread  (usually)
 *----------------------------------------------------------------
 */
int prism2mgmt_flashdl_state(struct wlandevice *wlandev, void *msgp)
{
	int result = 0;
	struct hfa384x *hw = wlandev->priv;
	struct p80211msg_p2req_flashdl_state *msg = msgp;

	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
		netdev_err(wlandev->netdev,
			   "flashdl_state(): may only be called in the fwload state.\n");
		msg->resultcode.data =
		    P80211ENUM_resultcode_implementation_failure;
		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
		return 0;
	}

	/*
	 ** Note: Interrupts are locked out if this is an AP and are NOT
	 ** locked out if this is a station.
	 */

	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
	if (msg->enable.data == P80211ENUM_truth_true) {
		if (hfa384x_drvr_flashdl_enable(hw)) {
			msg->resultcode.data =
			    P80211ENUM_resultcode_implementation_failure;
		} else {
			msg->resultcode.data = P80211ENUM_resultcode_success;
		}
	} else {
		hfa384x_drvr_flashdl_disable(hw);
		msg->resultcode.data = P80211ENUM_resultcode_success;
		/* NOTE: At this point, the MAC is in the post-reset
		 * state and the driver is in the fwload state.
		 * We need to get the MAC back into the fwload
		 * state.  To do this, we set the nsdstate to HWPRESENT
		 * and then call the ifstate function to redo everything
		 * that got us into the fwload state.
		 */
		wlandev->msdstate = WLAN_MSD_HWPRESENT;
		result = prism2sta_ifstate(wlandev, P80211ENUM_ifstate_fwload);
		if (result != P80211ENUM_resultcode_success) {
			netdev_err(wlandev->netdev,
				   "prism2sta_ifstate(fwload) failed, P80211ENUM_resultcode=%d\n",
				   result);
			msg->resultcode.data =
			    P80211ENUM_resultcode_implementation_failure;
			result = -1;
		}
	}

	return result;
}

/*----------------------------------------------------------------
 * prism2mgmt_flashdl_write
 *
 *
 *
 * Arguments:
 *	wlandev		wlan device structure
 *	msgp		ptr to msg buffer
 *
 * Returns:
 *	0	success and done
 *	<0	success, but we're waiting for something to finish.
 *	>0	an error occurred while handling the message.
 * Side effects:
 *
 * Call context:
 *	process thread  (usually)
 *----------------------------------------------------------------
 */
int prism2mgmt_flashdl_write(struct wlandevice *wlandev, void *msgp)
{
	struct hfa384x *hw = wlandev->priv;
	struct p80211msg_p2req_flashdl_write *msg = msgp;
	u32 addr;
	u32 len;
	u8 *buf;

	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
		netdev_err(wlandev->netdev,
			   "flashdl_write(): may only be called in the fwload state.\n");
		msg->resultcode.data =
		    P80211ENUM_resultcode_implementation_failure;
		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
		return 0;
	}

	/*
	 ** Note: Interrupts are locked out if this is an AP and are NOT
	 ** locked out if this is a station.
	 */

	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
	/* first validate the length */
	if (msg->len.data > sizeof(msg->data.data)) {
		msg->resultcode.status =
		    P80211ENUM_resultcode_invalid_parameters;
		return 0;
	}
	/* call the hfa384x function to do the write */
	addr = msg->addr.data;
	len = msg->len.data;
	buf = msg->data.data;
	if (hfa384x_drvr_flashdl_write(hw, addr, buf, len))
		msg->resultcode.data = P80211ENUM_resultcode_refused;

	msg->resultcode.data = P80211ENUM_resultcode_success;

	return 0;
}

/*----------------------------------------------------------------
 * prism2mgmt_autojoin
 *
 * Associate with an ESS.
 *
 * Arguments:
 *	wlandev		wlan device structure
 *	msgp		ptr to msg buffer
 *
 * Returns:
 *	0	success and done
 *	<0	success, but we're waiting for something to finish.
 *	>0	an error occurred while handling the message.
 * Side effects:
 *
 * Call context:
 *	process thread  (usually)
 *	interrupt
 *----------------------------------------------------------------
 */
int prism2mgmt_autojoin(struct wlandevice *wlandev, void *msgp)
{
	struct hfa384x *hw = wlandev->priv;
	int result = 0;
	u16 reg;
	u16 port_type;
	struct p80211msg_lnxreq_autojoin *msg = msgp;
	struct p80211pstrd *pstr;
	u8 bytebuf[256];
	struct hfa384x_bytestr *p2bytestr = (struct hfa384x_bytestr *)bytebuf;

	wlandev->macmode = WLAN_MACMODE_NONE;

	/* Set the SSID */
	memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));

	/* Disable the Port */
	hfa384x_drvr_disable(hw, 0);

	/*** STATION ***/
	/* Set the TxRates */
	hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, 0x000f);

	/* Set the auth type */
	if (msg->authtype.data == P80211ENUM_authalg_sharedkey)
		reg = HFA384x_CNFAUTHENTICATION_SHAREDKEY;
	else
		reg = HFA384x_CNFAUTHENTICATION_OPENSYSTEM;

	hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAUTHENTICATION, reg);

	/* Set the ssid */
	memset(bytebuf, 0, 256);
	pstr = (struct p80211pstrd *)&msg->ssid.data;
	prism2mgmt_pstr2bytestr(p2bytestr, pstr);
	result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
					bytebuf,
					HFA384x_RID_CNFDESIREDSSID_LEN);
	port_type = HFA384x_PORTTYPE_BSS;
	/* Set the PortType */
	hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, port_type);

	/* Enable the Port */
	hfa384x_drvr_enable(hw, 0);

	/* Set the resultcode */
	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
	msg->resultcode.data = P80211ENUM_resultcode_success;

	return result;
}

/*----------------------------------------------------------------
 * prism2mgmt_wlansniff
 *
 * Start or stop sniffing.
 *
 * Arguments:
 *	wlandev		wlan device structure
 *	msgp		ptr to msg buffer
 *
 * Returns:
 *	0	success and done
 *	<0	success, but we're waiting for something to finish.
 *	>0	an error occurred while handling the message.
 * Side effects:
 *
 * Call context:
 *	process thread  (usually)
 *	interrupt
 *----------------------------------------------------------------
 */
int prism2mgmt_wlansniff(struct wlandevice *wlandev, void *msgp)
{
	int result = 0;
	struct p80211msg_lnxreq_wlansniff *msg = msgp;

	struct hfa384x *hw = wlandev->priv;
	u16 word;

	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
	switch (msg->enable.data) {
	case P80211ENUM_truth_false:
		/* Confirm that we're in monitor mode */
		if (wlandev->netdev->type == ARPHRD_ETHER) {
			msg->resultcode.data =
			    P80211ENUM_resultcode_invalid_parameters;
			return 0;
		}
		/* Disable monitor mode */
		result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_DISABLE);
		if (result) {
			netdev_dbg(wlandev->netdev,
				   "failed to disable monitor mode, result=%d\n",
				   result);
			goto failed;
		}
		/* Disable port 0 */
		result = hfa384x_drvr_disable(hw, 0);
		if (result) {
			netdev_dbg
			(wlandev->netdev,
			     "failed to disable port 0 after sniffing, result=%d\n",
			     result);
			goto failed;
		}
		/* Clear the driver state */
		wlandev->netdev->type = ARPHRD_ETHER;

		/* Restore the wepflags */
		result = hfa384x_drvr_setconfig16(hw,
						  HFA384x_RID_CNFWEPFLAGS,
						  hw->presniff_wepflags);
		if (result) {
			netdev_dbg
			    (wlandev->netdev,
			     "failed to restore wepflags=0x%04x, result=%d\n",
			     hw->presniff_wepflags, result);
			goto failed;
		}

		/* Set the port to its prior type and enable (if necessary) */
		if (hw->presniff_port_type != 0) {
			word = hw->presniff_port_type;
			result = hfa384x_drvr_setconfig16(hw,
						  HFA384x_RID_CNFPORTTYPE,
						  word);
			if (result) {
				netdev_dbg
				    (wlandev->netdev,
				     "failed to restore porttype, result=%d\n",
				     result);
				goto failed;
			}

			/* Enable the port */
			result = hfa384x_drvr_enable(hw, 0);
			if (result) {
				netdev_dbg(wlandev->netdev,
					   "failed to enable port to presniff setting, result=%d\n",
					   result);
				goto failed;
			}
		} else {
			result = hfa384x_drvr_disable(hw, 0);
		}

		netdev_info(wlandev->netdev, "monitor mode disabled\n");
		msg->resultcode.data = P80211ENUM_resultcode_success;
		return 0;
	case P80211ENUM_truth_true:
		/* Disable the port (if enabled), only check Port 0 */
		if (hw->port_enabled[0]) {
			if (wlandev->netdev->type == ARPHRD_ETHER) {
				/* Save macport 0 state */
				result = hfa384x_drvr_getconfig16(hw,
						  HFA384x_RID_CNFPORTTYPE,
						  &hw->presniff_port_type);
				if (result) {
					netdev_dbg
					(wlandev->netdev,
					     "failed to read porttype, result=%d\n",
					     result);
					goto failed;
				}
				/* Save the wepflags state */
				result = hfa384x_drvr_getconfig16(hw,
						  HFA384x_RID_CNFWEPFLAGS,
						  &hw->presniff_wepflags);
				if (result) {
					netdev_dbg
					(wlandev->netdev,
					     "failed to read wepflags, result=%d\n",
					     result);
					goto failed;
				}
				hfa384x_drvr_stop(hw);
				result = hfa384x_drvr_start(hw);
				if (result) {
					netdev_dbg(wlandev->netdev,
						   "failed to restart the card for sniffing, result=%d\n",
						   result);
					goto failed;
				}
			} else {
				/* Disable the port */
				result = hfa384x_drvr_disable(hw, 0);
				if (result) {
					netdev_dbg(wlandev->netdev,
						   "failed to enable port for sniffing, result=%d\n",
						   result);
					goto failed;
				}
			}
		} else {
			hw->presniff_port_type = 0;
		}

		/* Set the channel we wish to sniff  */
		word = msg->channel.data;
		result = hfa384x_drvr_setconfig16(hw,
						  HFA384x_RID_CNFOWNCHANNEL,
						  word);
		hw->sniff_channel = word;

		if (result) {
			netdev_dbg(wlandev->netdev,
				   "failed to set channel %d, result=%d\n",
				   word, result);
			goto failed;
		}

		/* Now if we're already sniffing, we can skip the rest */
		if (wlandev->netdev->type != ARPHRD_ETHER) {
			/* Set the port type to pIbss */
			word = HFA384x_PORTTYPE_PSUEDOIBSS;
			result = hfa384x_drvr_setconfig16(hw,
						  HFA384x_RID_CNFPORTTYPE,
						  word);
			if (result) {
				netdev_dbg
				    (wlandev->netdev,
				     "failed to set porttype %d, result=%d\n",
				     word, result);
				goto failed;
			}
			if ((msg->keepwepflags.status ==
			     P80211ENUM_msgitem_status_data_ok) &&
			    (msg->keepwepflags.data != P80211ENUM_truth_true)) {
				/* Set the wepflags for no decryption */
				word = HFA384x_WEPFLAGS_DISABLE_TXCRYPT |
				    HFA384x_WEPFLAGS_DISABLE_RXCRYPT;
				result =
				    hfa384x_drvr_setconfig16(hw,
						     HFA384x_RID_CNFWEPFLAGS,
						     word);
			}

			if (result) {
				netdev_dbg
				  (wlandev->netdev,
				   "failed to set wepflags=0x%04x, result=%d\n",
				   word, result);
				goto failed;
			}
		}

		/* Do we want to strip the FCS in monitor mode? */
		if ((msg->stripfcs.status ==
		     P80211ENUM_msgitem_status_data_ok) &&
		    (msg->stripfcs.data == P80211ENUM_truth_true)) {
			hw->sniff_fcs = 0;
		} else {
			hw->sniff_fcs = 1;
		}

		/* Do we want to truncate the packets? */
		if (msg->packet_trunc.status ==
		    P80211ENUM_msgitem_status_data_ok) {
			hw->sniff_truncate = msg->packet_trunc.data;
		} else {
			hw->sniff_truncate = 0;
		}

		/* Enable the port */
		result = hfa384x_drvr_enable(hw, 0);
		if (result) {
			netdev_dbg
			    (wlandev->netdev,
			     "failed to enable port for sniffing, result=%d\n",
			     result);
			goto failed;
		}
		/* Enable monitor mode */
		result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_ENABLE);
		if (result) {
			netdev_dbg(wlandev->netdev,
				   "failed to enable monitor mode, result=%d\n",
				   result);
			goto failed;
		}

		if (wlandev->netdev->type == ARPHRD_ETHER)
			netdev_info(wlandev->netdev, "monitor mode enabled\n");

		/* Set the driver state */
		/* Do we want the prism2 header? */
		if ((msg->prismheader.status ==
		     P80211ENUM_msgitem_status_data_ok) &&
		    (msg->prismheader.data == P80211ENUM_truth_true)) {
			hw->sniffhdr = 0;
			wlandev->netdev->type = ARPHRD_IEEE80211_PRISM;
		} else if ((msg->wlanheader.status ==
			    P80211ENUM_msgitem_status_data_ok) &&
			   (msg->wlanheader.data == P80211ENUM_truth_true)) {
			hw->sniffhdr = 1;
			wlandev->netdev->type = ARPHRD_IEEE80211_PRISM;
		} else {
			wlandev->netdev->type = ARPHRD_IEEE80211;
		}

		msg->resultcode.data = P80211ENUM_resultcode_success;
		return 0;
	default:
		msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
		return 0;
	}

failed:
	msg->resultcode.data = P80211ENUM_resultcode_refused;
	return 0;
}