Contributors: 3
Author Tokens Token Proportion Commits Commit Proportion
Yu Xu 1051 99.72% 1 25.00%
Greg Kroah-Hartman 2 0.19% 2 50.00%
Geert Uytterhoeven 1 0.09% 1 25.00%
Total 1054 4


// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
 */

#ifndef __MV_U3D_H
#define __MV_U3D_H

#define MV_U3D_EP_CONTEXT_ALIGNMENT	32
#define MV_U3D_TRB_ALIGNMENT	16
#define MV_U3D_DMA_BOUNDARY	4096
#define MV_U3D_EP0_MAX_PKT_SIZE	512

/* ep0 transfer state */
#define MV_U3D_WAIT_FOR_SETUP		0
#define MV_U3D_DATA_STATE_XMIT		1
#define MV_U3D_DATA_STATE_NEED_ZLP	2
#define MV_U3D_WAIT_FOR_OUT_STATUS	3
#define MV_U3D_DATA_STATE_RECV		4
#define MV_U3D_STATUS_STAGE		5

#define MV_U3D_EP_MAX_LENGTH_TRANSFER	0x10000

/* USB3 Interrupt Status */
#define MV_U3D_USBINT_SETUP		0x00000001
#define MV_U3D_USBINT_RX_COMPLETE	0x00000002
#define MV_U3D_USBINT_TX_COMPLETE	0x00000004
#define MV_U3D_USBINT_UNDER_RUN	0x00000008
#define MV_U3D_USBINT_RXDESC_ERR	0x00000010
#define MV_U3D_USBINT_TXDESC_ERR	0x00000020
#define MV_U3D_USBINT_RX_TRB_COMPLETE	0x00000040
#define MV_U3D_USBINT_TX_TRB_COMPLETE	0x00000080
#define MV_U3D_USBINT_VBUS_VALID	0x00010000
#define MV_U3D_USBINT_STORAGE_CMD_FULL	0x00020000
#define MV_U3D_USBINT_LINK_CHG		0x01000000

/* USB3 Interrupt Enable */
#define MV_U3D_INTR_ENABLE_SETUP		0x00000001
#define MV_U3D_INTR_ENABLE_RX_COMPLETE		0x00000002
#define MV_U3D_INTR_ENABLE_TX_COMPLETE		0x00000004
#define MV_U3D_INTR_ENABLE_UNDER_RUN		0x00000008
#define MV_U3D_INTR_ENABLE_RXDESC_ERR		0x00000010
#define MV_U3D_INTR_ENABLE_TXDESC_ERR		0x00000020
#define MV_U3D_INTR_ENABLE_RX_TRB_COMPLETE	0x00000040
#define MV_U3D_INTR_ENABLE_TX_TRB_COMPLETE	0x00000080
#define MV_U3D_INTR_ENABLE_RX_BUFFER_ERR	0x00000100
#define MV_U3D_INTR_ENABLE_VBUS_VALID		0x00010000
#define MV_U3D_INTR_ENABLE_STORAGE_CMD_FULL	0x00020000
#define MV_U3D_INTR_ENABLE_LINK_CHG		0x01000000
#define MV_U3D_INTR_ENABLE_PRIME_STATUS	0x02000000

/* USB3 Link Change */
#define MV_U3D_LINK_CHANGE_LINK_UP		0x00000001
#define MV_U3D_LINK_CHANGE_SUSPEND		0x00000002
#define MV_U3D_LINK_CHANGE_RESUME		0x00000004
#define MV_U3D_LINK_CHANGE_WRESET		0x00000008
#define MV_U3D_LINK_CHANGE_HRESET		0x00000010
#define MV_U3D_LINK_CHANGE_VBUS_INVALID	0x00000020
#define MV_U3D_LINK_CHANGE_INACT		0x00000040
#define MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0	0x00000080
#define MV_U3D_LINK_CHANGE_U1			0x00000100
#define MV_U3D_LINK_CHANGE_U2			0x00000200
#define MV_U3D_LINK_CHANGE_U3			0x00000400

/* bridge setting */
#define MV_U3D_BRIDGE_SETTING_VBUS_VALID	(1 << 16)

/* Command Register Bit Masks */
#define MV_U3D_CMD_RUN_STOP		0x00000001
#define MV_U3D_CMD_CTRL_RESET		0x00000002

/* ep control register */
#define MV_U3D_EPXCR_EP_TYPE_CONTROL		0
#define MV_U3D_EPXCR_EP_TYPE_ISOC		1
#define MV_U3D_EPXCR_EP_TYPE_BULK		2
#define MV_U3D_EPXCR_EP_TYPE_INT		3
#define MV_U3D_EPXCR_EP_ENABLE_SHIFT		4
#define MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT	12
#define MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT	16
#define MV_U3D_USB_BULK_BURST_OUT		6
#define MV_U3D_USB_BULK_BURST_IN		14

#define MV_U3D_EPXCR_EP_FLUSH		(1 << 7)
#define MV_U3D_EPXCR_EP_HALT		(1 << 1)
#define MV_U3D_EPXCR_EP_INIT		(1)

/* TX/RX Status Register */
#define MV_U3D_XFERSTATUS_COMPLETE_SHIFT	24
#define MV_U3D_COMPLETE_INVALID	0
#define MV_U3D_COMPLETE_SUCCESS	1
#define MV_U3D_COMPLETE_BUFF_ERR	2
#define MV_U3D_COMPLETE_SHORT_PACKET	3
#define MV_U3D_COMPLETE_TRB_ERR	5
#define MV_U3D_XFERSTATUS_TRB_LENGTH_MASK	(0xFFFFFF)

#define MV_U3D_USB_LINK_BYPASS_VBUS	0x8

#define MV_U3D_LTSSM_PHY_INIT_DONE		0x80000000
#define MV_U3D_LTSSM_NEVER_GO_COMPLIANCE	0x40000000

#define MV_U3D_USB3_OP_REGS_OFFSET	0x100
#define MV_U3D_USB3_PHY_OFFSET		0xB800

#define DCS_ENABLE	0x1

/* timeout */
#define MV_U3D_RESET_TIMEOUT		10000
#define MV_U3D_FLUSH_TIMEOUT		100000
#define MV_U3D_OWN_TIMEOUT		10000
#define LOOPS_USEC_SHIFT	4
#define LOOPS_USEC		(1 << LOOPS_USEC_SHIFT)
#define LOOPS(timeout)		((timeout) >> LOOPS_USEC_SHIFT)

/* ep direction */
#define MV_U3D_EP_DIR_IN		1
#define MV_U3D_EP_DIR_OUT		0
#define mv_u3d_ep_dir(ep)	(((ep)->ep_num == 0) ? \
				((ep)->u3d->ep0_dir) : ((ep)->direction))

/* usb capability registers */
struct mv_u3d_cap_regs {
	u32	rsvd[5];
	u32	dboff;	/* doorbell register offset */
	u32	rtsoff;	/* runtime register offset */
	u32	vuoff;	/* vendor unique register offset */
};

/* operation registers */
struct mv_u3d_op_regs {
	u32	usbcmd;		/* Command register */
	u32	rsvd1[11];
	u32	dcbaapl;	/* Device Context Base Address low register */
	u32	dcbaaph;	/* Device Context Base Address high register */
	u32	rsvd2[243];
	u32	portsc;		/* port status and control register*/
	u32	portlinkinfo;	/* port link info register*/
	u32	rsvd3[9917];
	u32	doorbell;	/* doorbell register */
};

/* control endpoint enable registers */
struct epxcr {
	u32	epxoutcr0;	/* ep out control 0 register */
	u32	epxoutcr1;	/* ep out control 1 register */
	u32	epxincr0;	/* ep in control 0 register */
	u32	epxincr1;	/* ep in control 1 register */
};

/* transfer status registers */
struct xferstatus {
	u32	curdeqlo;	/* current TRB pointer low */
	u32	curdeqhi;	/* current TRB pointer high */
	u32	statuslo;	/* transfer status low */
	u32	statushi;	/* transfer status high */
};

/* vendor unique control registers */
struct mv_u3d_vuc_regs {
	u32	ctrlepenable;	/* control endpoint enable register */
	u32	setuplock;	/* setup lock register */
	u32	endcomplete;	/* endpoint transfer complete register */
	u32	intrcause;	/* interrupt cause register */
	u32	intrenable;	/* interrupt enable register */
	u32	trbcomplete;	/* TRB complete register */
	u32	linkchange;	/* link change register */
	u32	rsvd1[5];
	u32	trbunderrun;	/* TRB underrun register */
	u32	rsvd2[43];
	u32	bridgesetting;	/* bridge setting register */
	u32	rsvd3[7];
	struct xferstatus	txst[16];	/* TX status register */
	struct xferstatus	rxst[16];	/* RX status register */
	u32	ltssm;		/* LTSSM control register */
	u32	pipe;		/* PIPE control register */
	u32	linkcr0;	/* link control 0 register */
	u32	linkcr1;	/* link control 1 register */
	u32	rsvd6[60];
	u32	mib0;		/* MIB0 counter register */
	u32	usblink;	/* usb link control register */
	u32	ltssmstate;	/* LTSSM state register */
	u32	linkerrorcause;	/* link error cause register */
	u32	rsvd7[60];
	u32	devaddrtiebrkr;	/* device address and tie breaker */
	u32	itpinfo0;	/* ITP info 0 register */
	u32	itpinfo1;	/* ITP info 1 register */
	u32	rsvd8[61];
	struct epxcr	epcr[16];	/* ep control register */
	u32	rsvd9[64];
	u32	phyaddr;	/* PHY address register */
	u32	phydata;	/* PHY data register */
};

/* Endpoint context structure */
struct mv_u3d_ep_context {
	u32	rsvd0;
	u32	rsvd1;
	u32	trb_addr_lo;		/* TRB address low 32 bit */
	u32	trb_addr_hi;		/* TRB address high 32 bit */
	u32	rsvd2;
	u32	rsvd3;
	struct usb_ctrlrequest setup_buffer;	/* setup data buffer */
};

/* TRB control data structure */
struct mv_u3d_trb_ctrl {
	u32	own:1;		/* owner of TRB */
	u32	rsvd1:3;
	u32	chain:1;	/* associate this TRB with the
				next TRB on the Ring */
	u32	ioc:1;		/* interrupt on complete */
	u32	rsvd2:4;
	u32	type:6;		/* TRB type */
#define TYPE_NORMAL	1
#define TYPE_DATA	3
#define TYPE_LINK	6
	u32	dir:1;		/* Working at data stage of control endpoint
				operation. 0 is OUT and 1 is IN. */
	u32	rsvd3:15;
};

/* TRB data structure
 * For multiple TRB, all the TRBs' physical address should be continuous.
 */
struct mv_u3d_trb_hw {
	u32	buf_addr_lo;	/* data buffer address low 32 bit */
	u32	buf_addr_hi;	/* data buffer address high 32 bit */
	u32	trb_len;	/* transfer length */
	struct mv_u3d_trb_ctrl	ctrl;	/* TRB control data */
};

/* TRB structure */
struct mv_u3d_trb {
	struct mv_u3d_trb_hw *trb_hw;	/* point to the trb_hw structure */
	dma_addr_t trb_dma;		/* dma address for this trb_hw */
	struct list_head trb_list;	/* trb list */
};

/* device data structure */
struct mv_u3d {
	struct usb_gadget		gadget;
	struct usb_gadget_driver	*driver;
	spinlock_t			lock;	/* device lock */
	struct completion		*done;
	struct device			*dev;
	int				irq;

	/* usb controller registers */
	struct mv_u3d_cap_regs __iomem	*cap_regs;
	struct mv_u3d_op_regs __iomem	*op_regs;
	struct mv_u3d_vuc_regs __iomem	*vuc_regs;
	void __iomem			*phy_regs;

	unsigned int			max_eps;
	struct mv_u3d_ep_context	*ep_context;
	size_t				ep_context_size;
	dma_addr_t			ep_context_dma;

	struct dma_pool			*trb_pool; /* for TRB data structure */
	struct mv_u3d_ep		*eps;

	struct mv_u3d_req		*status_req; /* ep0 status request */
	struct usb_ctrlrequest		local_setup_buff; /* store setup data*/

	unsigned int		resume_state;	/* USB state to resume */
	unsigned int		usb_state;	/* USB current state */
	unsigned int		ep0_state;	/* Endpoint zero state */
	unsigned int		ep0_dir;

	unsigned int		dev_addr;	/* device address */

	unsigned int		errors;

	unsigned		softconnect:1;
	unsigned		vbus_active:1;	/* vbus is active or not */
	unsigned		remote_wakeup:1; /* support remote wakeup */
	unsigned		clock_gating:1;	/* clock gating or not */
	unsigned		active:1;	/* udc is active or not */
	unsigned		vbus_valid_detect:1; /* udc vbus detection */

	struct mv_usb_addon_irq *vbus;
	unsigned int		power;

	struct clk		*clk;
};

/* endpoint data structure */
struct mv_u3d_ep {
	struct usb_ep		ep;
	struct mv_u3d		*u3d;
	struct list_head	queue;	/* ep request queued hardware */
	struct list_head	req_list; /* list of ep request */
	struct mv_u3d_ep_context	*ep_context; /* ep context */
	u32			direction;
	char			name[14];
	u32			processing; /* there is ep request
						queued on haredware */
	spinlock_t		req_lock; /* ep lock */
	unsigned		wedge:1;
	unsigned		enabled:1;
	unsigned		ep_type:2;
	unsigned		ep_num:8;
};

/* request data structure */
struct mv_u3d_req {
	struct usb_request	req;
	struct mv_u3d_ep	*ep;
	struct list_head	queue;	/* ep requst queued on hardware */
	struct list_head	list;	/* ep request list */
	struct list_head	trb_list; /* trb list of a request */

	struct mv_u3d_trb	*trb_head; /* point to first trb of a request */
	unsigned		trb_count; /* TRB number in the chain */
	unsigned		chain;	   /* TRB chain or not */
};

#endif