Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Hans de Goede | 3761 | 94.57% | 9 | 42.86% |
Icenowy Zheng | 157 | 3.95% | 1 | 4.76% |
Måns Rullgård | 19 | 0.48% | 1 | 4.76% |
Jonathan Liu | 11 | 0.28% | 1 | 4.76% |
Emilio López | 7 | 0.18% | 1 | 4.76% |
Chanwoo Choi | 6 | 0.15% | 1 | 4.76% |
Heikki Krogerus | 5 | 0.13% | 1 | 4.76% |
Bin Liu | 4 | 0.10% | 1 | 4.76% |
Ben Dooks | 2 | 0.05% | 1 | 4.76% |
Greg Kroah-Hartman | 2 | 0.05% | 2 | 9.52% |
Min Guo | 2 | 0.05% | 1 | 4.76% |
Bhumika Goyal | 1 | 0.03% | 1 | 4.76% |
Total | 3977 | 21 |
// SPDX-License-Identifier: GPL-2.0+ /* * Allwinner sun4i MUSB Glue Layer * * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com> * * Based on code from * Allwinner Technology Co., Ltd. <www.allwinnertech.com> */ #include <linux/clk.h> #include <linux/err.h> #include <linux/extcon.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> #include <linux/phy/phy-sun4i-usb.h> #include <linux/platform_device.h> #include <linux/reset.h> #include <linux/soc/sunxi/sunxi_sram.h> #include <linux/usb/musb.h> #include <linux/usb/of.h> #include <linux/usb/usb_phy_generic.h> #include <linux/workqueue.h> #include "musb_core.h" /* * Register offsets, note sunxi musb has a different layout then most * musb implementations, we translate the layout in musb_readb & friends. */ #define SUNXI_MUSB_POWER 0x0040 #define SUNXI_MUSB_DEVCTL 0x0041 #define SUNXI_MUSB_INDEX 0x0042 #define SUNXI_MUSB_VEND0 0x0043 #define SUNXI_MUSB_INTRTX 0x0044 #define SUNXI_MUSB_INTRRX 0x0046 #define SUNXI_MUSB_INTRTXE 0x0048 #define SUNXI_MUSB_INTRRXE 0x004a #define SUNXI_MUSB_INTRUSB 0x004c #define SUNXI_MUSB_INTRUSBE 0x0050 #define SUNXI_MUSB_FRAME 0x0054 #define SUNXI_MUSB_TXFIFOSZ 0x0090 #define SUNXI_MUSB_TXFIFOADD 0x0092 #define SUNXI_MUSB_RXFIFOSZ 0x0094 #define SUNXI_MUSB_RXFIFOADD 0x0096 #define SUNXI_MUSB_FADDR 0x0098 #define SUNXI_MUSB_TXFUNCADDR 0x0098 #define SUNXI_MUSB_TXHUBADDR 0x009a #define SUNXI_MUSB_TXHUBPORT 0x009b #define SUNXI_MUSB_RXFUNCADDR 0x009c #define SUNXI_MUSB_RXHUBADDR 0x009e #define SUNXI_MUSB_RXHUBPORT 0x009f #define SUNXI_MUSB_CONFIGDATA 0x00c0 /* VEND0 bits */ #define SUNXI_MUSB_VEND0_PIO_MODE 0 /* flags */ #define SUNXI_MUSB_FL_ENABLED 0 #define SUNXI_MUSB_FL_HOSTMODE 1 #define SUNXI_MUSB_FL_HOSTMODE_PEND 2 #define SUNXI_MUSB_FL_VBUS_ON 3 #define SUNXI_MUSB_FL_PHY_ON 4 #define SUNXI_MUSB_FL_HAS_SRAM 5 #define SUNXI_MUSB_FL_HAS_RESET 6 #define SUNXI_MUSB_FL_NO_CONFIGDATA 7 #define SUNXI_MUSB_FL_PHY_MODE_PEND 8 /* Our read/write methods need access and do not get passed in a musb ref :| */ static struct musb *sunxi_musb; struct sunxi_glue { struct device *dev; struct musb *musb; struct platform_device *musb_pdev; struct clk *clk; struct reset_control *rst; struct phy *phy; struct platform_device *usb_phy; struct usb_phy *xceiv; enum phy_mode phy_mode; unsigned long flags; struct work_struct work; struct extcon_dev *extcon; struct notifier_block host_nb; }; /* phy_power_on / off may sleep, so we use a workqueue */ static void sunxi_musb_work(struct work_struct *work) { struct sunxi_glue *glue = container_of(work, struct sunxi_glue, work); bool vbus_on, phy_on; if (!test_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags)) return; if (test_and_clear_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags)) { struct musb *musb = glue->musb; unsigned long flags; u8 devctl; spin_lock_irqsave(&musb->lock, flags); devctl = readb(musb->mregs + SUNXI_MUSB_DEVCTL); if (test_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags)) { set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; MUSB_HST_MODE(musb); devctl |= MUSB_DEVCTL_SESSION; } else { clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); musb->xceiv->otg->state = OTG_STATE_B_IDLE; MUSB_DEV_MODE(musb); devctl &= ~MUSB_DEVCTL_SESSION; } writeb(devctl, musb->mregs + SUNXI_MUSB_DEVCTL); spin_unlock_irqrestore(&musb->lock, flags); } vbus_on = test_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); phy_on = test_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); if (phy_on != vbus_on) { if (vbus_on) { phy_power_on(glue->phy); set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); } else { phy_power_off(glue->phy); clear_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); } } if (test_and_clear_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags)) phy_set_mode(glue->phy, glue->phy_mode); } static void sunxi_musb_set_vbus(struct musb *musb, int is_on) { struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); if (is_on) { set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; } else { clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); } schedule_work(&glue->work); } static void sunxi_musb_pre_root_reset_end(struct musb *musb) { struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); sun4i_usb_phy_set_squelch_detect(glue->phy, false); } static void sunxi_musb_post_root_reset_end(struct musb *musb) { struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); sun4i_usb_phy_set_squelch_detect(glue->phy, true); } static irqreturn_t sunxi_musb_interrupt(int irq, void *__hci) { struct musb *musb = __hci; unsigned long flags; spin_lock_irqsave(&musb->lock, flags); musb->int_usb = readb(musb->mregs + SUNXI_MUSB_INTRUSB); if (musb->int_usb) writeb(musb->int_usb, musb->mregs + SUNXI_MUSB_INTRUSB); if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) { /* ep0 FADDR must be 0 when (re)entering peripheral mode */ musb_ep_select(musb->mregs, 0); musb_writeb(musb->mregs, MUSB_FADDR, 0); } musb->int_tx = readw(musb->mregs + SUNXI_MUSB_INTRTX); if (musb->int_tx) writew(musb->int_tx, musb->mregs + SUNXI_MUSB_INTRTX); musb->int_rx = readw(musb->mregs + SUNXI_MUSB_INTRRX); if (musb->int_rx) writew(musb->int_rx, musb->mregs + SUNXI_MUSB_INTRRX); musb_interrupt(musb); spin_unlock_irqrestore(&musb->lock, flags); return IRQ_HANDLED; } static int sunxi_musb_host_notifier(struct notifier_block *nb, unsigned long event, void *ptr) { struct sunxi_glue *glue = container_of(nb, struct sunxi_glue, host_nb); if (event) set_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags); else clear_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags); set_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags); schedule_work(&glue->work); return NOTIFY_DONE; } static int sunxi_musb_init(struct musb *musb) { struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); int ret; sunxi_musb = musb; musb->phy = glue->phy; musb->xceiv = glue->xceiv; if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) { ret = sunxi_sram_claim(musb->controller->parent); if (ret) return ret; } ret = clk_prepare_enable(glue->clk); if (ret) goto error_sram_release; if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) { ret = reset_control_deassert(glue->rst); if (ret) goto error_clk_disable; } writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0); /* Register notifier before calling phy_init() */ ret = devm_extcon_register_notifier(glue->dev, glue->extcon, EXTCON_USB_HOST, &glue->host_nb); if (ret) goto error_reset_assert; ret = phy_init(glue->phy); if (ret) goto error_reset_assert; musb->isr = sunxi_musb_interrupt; /* Stop the musb-core from doing runtime pm (not supported on sunxi) */ pm_runtime_get(musb->controller); return 0; error_reset_assert: if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) reset_control_assert(glue->rst); error_clk_disable: clk_disable_unprepare(glue->clk); error_sram_release: if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) sunxi_sram_release(musb->controller->parent); return ret; } static int sunxi_musb_exit(struct musb *musb) { struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); pm_runtime_put(musb->controller); cancel_work_sync(&glue->work); if (test_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags)) phy_power_off(glue->phy); phy_exit(glue->phy); if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) reset_control_assert(glue->rst); clk_disable_unprepare(glue->clk); if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) sunxi_sram_release(musb->controller->parent); devm_usb_put_phy(glue->dev, glue->xceiv); return 0; } static void sunxi_musb_enable(struct musb *musb) { struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); glue->musb = musb; /* musb_core does not call us in a balanced manner */ if (test_and_set_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags)) return; schedule_work(&glue->work); } static void sunxi_musb_disable(struct musb *musb) { struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); clear_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags); } static struct dma_controller * sunxi_musb_dma_controller_create(struct musb *musb, void __iomem *base) { return NULL; } static void sunxi_musb_dma_controller_destroy(struct dma_controller *c) { } static int sunxi_musb_set_mode(struct musb *musb, u8 mode) { struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); enum phy_mode new_mode; switch (mode) { case MUSB_HOST: new_mode = PHY_MODE_USB_HOST; break; case MUSB_PERIPHERAL: new_mode = PHY_MODE_USB_DEVICE; break; case MUSB_OTG: new_mode = PHY_MODE_USB_OTG; break; default: dev_err(musb->controller->parent, "Error requested mode not supported by this kernel\n"); return -EINVAL; } if (glue->phy_mode == new_mode) return 0; if (musb->port_mode != MUSB_OTG) { dev_err(musb->controller->parent, "Error changing modes is only supported in dual role mode\n"); return -EINVAL; } if (musb->port1_status & USB_PORT_STAT_ENABLE) musb_root_disconnect(musb); /* * phy_set_mode may sleep, and we're called with a spinlock held, * so let sunxi_musb_work deal with it. */ glue->phy_mode = new_mode; set_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags); schedule_work(&glue->work); return 0; } static int sunxi_musb_recover(struct musb *musb) { struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); /* * Schedule a phy_set_mode with the current glue->phy_mode value, * this will force end the current session. */ set_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags); schedule_work(&glue->work); return 0; } /* * sunxi musb register layout * 0x00 - 0x17 fifo regs, 1 long per fifo * 0x40 - 0x57 generic control regs (power - frame) * 0x80 - 0x8f ep control regs (addressed through hw_ep->regs, indexed) * 0x90 - 0x97 fifo control regs (indexed) * 0x98 - 0x9f multipoint / busctl regs (indexed) * 0xc0 configdata reg */ static u32 sunxi_musb_fifo_offset(u8 epnum) { return (epnum * 4); } static u32 sunxi_musb_ep_offset(u8 epnum, u16 offset) { WARN_ONCE(offset != 0, "sunxi_musb_ep_offset called with non 0 offset\n"); return 0x80; /* indexed, so ignore epnum */ } static u32 sunxi_musb_busctl_offset(u8 epnum, u16 offset) { return SUNXI_MUSB_TXFUNCADDR + offset; } static u8 sunxi_musb_readb(void __iomem *addr, u32 offset) { struct sunxi_glue *glue; if (addr == sunxi_musb->mregs) { /* generic control or fifo control reg access */ switch (offset) { case MUSB_FADDR: return readb(addr + SUNXI_MUSB_FADDR); case MUSB_POWER: return readb(addr + SUNXI_MUSB_POWER); case MUSB_INTRUSB: return readb(addr + SUNXI_MUSB_INTRUSB); case MUSB_INTRUSBE: return readb(addr + SUNXI_MUSB_INTRUSBE); case MUSB_INDEX: return readb(addr + SUNXI_MUSB_INDEX); case MUSB_TESTMODE: return 0; /* No testmode on sunxi */ case MUSB_DEVCTL: return readb(addr + SUNXI_MUSB_DEVCTL); case MUSB_TXFIFOSZ: return readb(addr + SUNXI_MUSB_TXFIFOSZ); case MUSB_RXFIFOSZ: return readb(addr + SUNXI_MUSB_RXFIFOSZ); case MUSB_CONFIGDATA + 0x10: /* See musb_read_configdata() */ glue = dev_get_drvdata(sunxi_musb->controller->parent); /* A33 saves a reg, and we get to hardcode this */ if (test_bit(SUNXI_MUSB_FL_NO_CONFIGDATA, &glue->flags)) return 0xde; return readb(addr + SUNXI_MUSB_CONFIGDATA); /* Offset for these is fixed by sunxi_musb_busctl_offset() */ case SUNXI_MUSB_TXFUNCADDR: case SUNXI_MUSB_TXHUBADDR: case SUNXI_MUSB_TXHUBPORT: case SUNXI_MUSB_RXFUNCADDR: case SUNXI_MUSB_RXHUBADDR: case SUNXI_MUSB_RXHUBPORT: /* multipoint / busctl reg access */ return readb(addr + offset); default: dev_err(sunxi_musb->controller->parent, "Error unknown readb offset %u\n", offset); return 0; } } else if (addr == (sunxi_musb->mregs + 0x80)) { /* ep control reg access */ /* sunxi has a 2 byte hole before the txtype register */ if (offset >= MUSB_TXTYPE) offset += 2; return readb(addr + offset); } dev_err(sunxi_musb->controller->parent, "Error unknown readb at 0x%x bytes offset\n", (int)(addr - sunxi_musb->mregs)); return 0; } static void sunxi_musb_writeb(void __iomem *addr, unsigned offset, u8 data) { if (addr == sunxi_musb->mregs) { /* generic control or fifo control reg access */ switch (offset) { case MUSB_FADDR: return writeb(data, addr + SUNXI_MUSB_FADDR); case MUSB_POWER: return writeb(data, addr + SUNXI_MUSB_POWER); case MUSB_INTRUSB: return writeb(data, addr + SUNXI_MUSB_INTRUSB); case MUSB_INTRUSBE: return writeb(data, addr + SUNXI_MUSB_INTRUSBE); case MUSB_INDEX: return writeb(data, addr + SUNXI_MUSB_INDEX); case MUSB_TESTMODE: if (data) dev_warn(sunxi_musb->controller->parent, "sunxi-musb does not have testmode\n"); return; case MUSB_DEVCTL: return writeb(data, addr + SUNXI_MUSB_DEVCTL); case MUSB_TXFIFOSZ: return writeb(data, addr + SUNXI_MUSB_TXFIFOSZ); case MUSB_RXFIFOSZ: return writeb(data, addr + SUNXI_MUSB_RXFIFOSZ); /* Offset for these is fixed by sunxi_musb_busctl_offset() */ case SUNXI_MUSB_TXFUNCADDR: case SUNXI_MUSB_TXHUBADDR: case SUNXI_MUSB_TXHUBPORT: case SUNXI_MUSB_RXFUNCADDR: case SUNXI_MUSB_RXHUBADDR: case SUNXI_MUSB_RXHUBPORT: /* multipoint / busctl reg access */ return writeb(data, addr + offset); default: dev_err(sunxi_musb->controller->parent, "Error unknown writeb offset %u\n", offset); return; } } else if (addr == (sunxi_musb->mregs + 0x80)) { /* ep control reg access */ if (offset >= MUSB_TXTYPE) offset += 2; return writeb(data, addr + offset); } dev_err(sunxi_musb->controller->parent, "Error unknown writeb at 0x%x bytes offset\n", (int)(addr - sunxi_musb->mregs)); } static u16 sunxi_musb_readw(void __iomem *addr, u32 offset) { if (addr == sunxi_musb->mregs) { /* generic control or fifo control reg access */ switch (offset) { case MUSB_INTRTX: return readw(addr + SUNXI_MUSB_INTRTX); case MUSB_INTRRX: return readw(addr + SUNXI_MUSB_INTRRX); case MUSB_INTRTXE: return readw(addr + SUNXI_MUSB_INTRTXE); case MUSB_INTRRXE: return readw(addr + SUNXI_MUSB_INTRRXE); case MUSB_FRAME: return readw(addr + SUNXI_MUSB_FRAME); case MUSB_TXFIFOADD: return readw(addr + SUNXI_MUSB_TXFIFOADD); case MUSB_RXFIFOADD: return readw(addr + SUNXI_MUSB_RXFIFOADD); case MUSB_HWVERS: return 0; /* sunxi musb version is not known */ default: dev_err(sunxi_musb->controller->parent, "Error unknown readw offset %u\n", offset); return 0; } } else if (addr == (sunxi_musb->mregs + 0x80)) { /* ep control reg access */ return readw(addr + offset); } dev_err(sunxi_musb->controller->parent, "Error unknown readw at 0x%x bytes offset\n", (int)(addr - sunxi_musb->mregs)); return 0; } static void sunxi_musb_writew(void __iomem *addr, unsigned offset, u16 data) { if (addr == sunxi_musb->mregs) { /* generic control or fifo control reg access */ switch (offset) { case MUSB_INTRTX: return writew(data, addr + SUNXI_MUSB_INTRTX); case MUSB_INTRRX: return writew(data, addr + SUNXI_MUSB_INTRRX); case MUSB_INTRTXE: return writew(data, addr + SUNXI_MUSB_INTRTXE); case MUSB_INTRRXE: return writew(data, addr + SUNXI_MUSB_INTRRXE); case MUSB_FRAME: return writew(data, addr + SUNXI_MUSB_FRAME); case MUSB_TXFIFOADD: return writew(data, addr + SUNXI_MUSB_TXFIFOADD); case MUSB_RXFIFOADD: return writew(data, addr + SUNXI_MUSB_RXFIFOADD); default: dev_err(sunxi_musb->controller->parent, "Error unknown writew offset %u\n", offset); return; } } else if (addr == (sunxi_musb->mregs + 0x80)) { /* ep control reg access */ return writew(data, addr + offset); } dev_err(sunxi_musb->controller->parent, "Error unknown writew at 0x%x bytes offset\n", (int)(addr - sunxi_musb->mregs)); } static const struct musb_platform_ops sunxi_musb_ops = { .quirks = MUSB_INDEXED_EP, .init = sunxi_musb_init, .exit = sunxi_musb_exit, .enable = sunxi_musb_enable, .disable = sunxi_musb_disable, .fifo_offset = sunxi_musb_fifo_offset, .ep_offset = sunxi_musb_ep_offset, .busctl_offset = sunxi_musb_busctl_offset, .readb = sunxi_musb_readb, .writeb = sunxi_musb_writeb, .readw = sunxi_musb_readw, .writew = sunxi_musb_writew, .dma_init = sunxi_musb_dma_controller_create, .dma_exit = sunxi_musb_dma_controller_destroy, .set_mode = sunxi_musb_set_mode, .recover = sunxi_musb_recover, .set_vbus = sunxi_musb_set_vbus, .pre_root_reset_end = sunxi_musb_pre_root_reset_end, .post_root_reset_end = sunxi_musb_post_root_reset_end, }; /* Allwinner OTG supports up to 5 endpoints */ #define SUNXI_MUSB_MAX_EP_NUM 6 #define SUNXI_MUSB_RAM_BITS 11 static struct musb_fifo_cfg sunxi_musb_mode_cfg[] = { MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512), MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512), MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512), MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512), MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512), MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512), MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512), MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512), MUSB_EP_FIFO_SINGLE(5, FIFO_TX, 512), MUSB_EP_FIFO_SINGLE(5, FIFO_RX, 512), }; /* H3/V3s OTG supports only 4 endpoints */ #define SUNXI_MUSB_MAX_EP_NUM_H3 5 static struct musb_fifo_cfg sunxi_musb_mode_cfg_h3[] = { MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512), MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512), MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512), MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512), MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512), MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512), MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512), MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512), }; static const struct musb_hdrc_config sunxi_musb_hdrc_config = { .fifo_cfg = sunxi_musb_mode_cfg, .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg), .multipoint = true, .dyn_fifo = true, .num_eps = SUNXI_MUSB_MAX_EP_NUM, .ram_bits = SUNXI_MUSB_RAM_BITS, }; static struct musb_hdrc_config sunxi_musb_hdrc_config_h3 = { .fifo_cfg = sunxi_musb_mode_cfg_h3, .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg_h3), .multipoint = true, .dyn_fifo = true, .num_eps = SUNXI_MUSB_MAX_EP_NUM_H3, .ram_bits = SUNXI_MUSB_RAM_BITS, }; static int sunxi_musb_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data pdata; struct platform_device_info pinfo; struct sunxi_glue *glue; struct device_node *np = pdev->dev.of_node; int ret; if (!np) { dev_err(&pdev->dev, "Error no device tree node found\n"); return -EINVAL; } glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); if (!glue) return -ENOMEM; memset(&pdata, 0, sizeof(pdata)); switch (usb_get_dr_mode(&pdev->dev)) { #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST case USB_DR_MODE_HOST: pdata.mode = MUSB_HOST; glue->phy_mode = PHY_MODE_USB_HOST; break; #endif #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_GADGET case USB_DR_MODE_PERIPHERAL: pdata.mode = MUSB_PERIPHERAL; glue->phy_mode = PHY_MODE_USB_DEVICE; break; #endif #ifdef CONFIG_USB_MUSB_DUAL_ROLE case USB_DR_MODE_OTG: pdata.mode = MUSB_OTG; glue->phy_mode = PHY_MODE_USB_OTG; break; #endif default: dev_err(&pdev->dev, "Invalid or missing 'dr_mode' property\n"); return -EINVAL; } pdata.platform_ops = &sunxi_musb_ops; if (!of_device_is_compatible(np, "allwinner,sun8i-h3-musb")) pdata.config = &sunxi_musb_hdrc_config; else pdata.config = &sunxi_musb_hdrc_config_h3; glue->dev = &pdev->dev; INIT_WORK(&glue->work, sunxi_musb_work); glue->host_nb.notifier_call = sunxi_musb_host_notifier; if (of_device_is_compatible(np, "allwinner,sun4i-a10-musb")) set_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags); if (of_device_is_compatible(np, "allwinner,sun6i-a31-musb")) set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags); if (of_device_is_compatible(np, "allwinner,sun8i-a33-musb") || of_device_is_compatible(np, "allwinner,sun8i-h3-musb")) { set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags); set_bit(SUNXI_MUSB_FL_NO_CONFIGDATA, &glue->flags); } glue->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(glue->clk)) { dev_err(&pdev->dev, "Error getting clock: %ld\n", PTR_ERR(glue->clk)); return PTR_ERR(glue->clk); } if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) { glue->rst = devm_reset_control_get(&pdev->dev, NULL); if (IS_ERR(glue->rst)) { if (PTR_ERR(glue->rst) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_err(&pdev->dev, "Error getting reset %ld\n", PTR_ERR(glue->rst)); return PTR_ERR(glue->rst); } } glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0); if (IS_ERR(glue->extcon)) { if (PTR_ERR(glue->extcon) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_err(&pdev->dev, "Invalid or missing extcon\n"); return PTR_ERR(glue->extcon); } glue->phy = devm_phy_get(&pdev->dev, "usb"); if (IS_ERR(glue->phy)) { if (PTR_ERR(glue->phy) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_err(&pdev->dev, "Error getting phy %ld\n", PTR_ERR(glue->phy)); return PTR_ERR(glue->phy); } glue->usb_phy = usb_phy_generic_register(); if (IS_ERR(glue->usb_phy)) { dev_err(&pdev->dev, "Error registering usb-phy %ld\n", PTR_ERR(glue->usb_phy)); return PTR_ERR(glue->usb_phy); } glue->xceiv = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); if (IS_ERR(glue->xceiv)) { ret = PTR_ERR(glue->xceiv); dev_err(&pdev->dev, "Error getting usb-phy %d\n", ret); goto err_unregister_usb_phy; } platform_set_drvdata(pdev, glue); memset(&pinfo, 0, sizeof(pinfo)); pinfo.name = "musb-hdrc"; pinfo.id = PLATFORM_DEVID_AUTO; pinfo.parent = &pdev->dev; pinfo.fwnode = of_fwnode_handle(pdev->dev.of_node); pinfo.of_node_reused = true; pinfo.res = pdev->resource; pinfo.num_res = pdev->num_resources; pinfo.data = &pdata; pinfo.size_data = sizeof(pdata); glue->musb_pdev = platform_device_register_full(&pinfo); if (IS_ERR(glue->musb_pdev)) { ret = PTR_ERR(glue->musb_pdev); dev_err(&pdev->dev, "Error registering musb dev: %d\n", ret); goto err_unregister_usb_phy; } return 0; err_unregister_usb_phy: usb_phy_generic_unregister(glue->usb_phy); return ret; } static int sunxi_musb_remove(struct platform_device *pdev) { struct sunxi_glue *glue = platform_get_drvdata(pdev); struct platform_device *usb_phy = glue->usb_phy; platform_device_unregister(glue->musb_pdev); usb_phy_generic_unregister(usb_phy); return 0; } static const struct of_device_id sunxi_musb_match[] = { { .compatible = "allwinner,sun4i-a10-musb", }, { .compatible = "allwinner,sun6i-a31-musb", }, { .compatible = "allwinner,sun8i-a33-musb", }, { .compatible = "allwinner,sun8i-h3-musb", }, {} }; MODULE_DEVICE_TABLE(of, sunxi_musb_match); static struct platform_driver sunxi_musb_driver = { .probe = sunxi_musb_probe, .remove = sunxi_musb_remove, .driver = { .name = "musb-sunxi", .of_match_table = sunxi_musb_match, }, }; module_platform_driver(sunxi_musb_driver); MODULE_DESCRIPTION("Allwinner sunxi MUSB Glue Layer"); MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1