Contributors: 7
Author Tokens Token Proportion Commits Commit Proportion
Kuninori Morimoto 1108 88.64% 17 51.52%
Yoshihiro Shimoda 100 8.00% 10 30.30%
Chris Brandt 26 2.08% 2 6.06%
Sergei Shtylyov 8 0.64% 1 3.03%
Veeraiyan Chidambaram 5 0.40% 1 3.03%
Paul Bolle 2 0.16% 1 3.03%
Nishad Kamdar 1 0.08% 1 3.03%
Total 1250 33 


/* SPDX-License-Identifier: GPL-1.0+ */
/*
 * Renesas USB driver
 *
 * Copyright (C) 2011 Renesas Solutions Corp.
 * Copyright (C) 2019 Renesas Electronics Corporation
 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 */
#ifndef RENESAS_USB_DRIVER_H
#define RENESAS_USB_DRIVER_H

#include <linux/clk.h>
#include <linux/extcon.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/usb/renesas_usbhs.h>

struct usbhs_priv;

#include "mod.h"
#include "pipe.h"

/*
 *
 *		register define
 *
 */
#define SYSCFG		0x0000
#define BUSWAIT		0x0002
#define DVSTCTR		0x0008
#define TESTMODE	0x000C
#define CFIFO		0x0014
#define CFIFOSEL	0x0020
#define CFIFOCTR	0x0022
#define D0FIFO		0x0100
#define D0FIFOSEL	0x0028
#define D0FIFOCTR	0x002A
#define D1FIFO		0x0120
#define D1FIFOSEL	0x002C
#define D1FIFOCTR	0x002E
#define INTENB0		0x0030
#define INTENB1		0x0032
#define BRDYENB		0x0036
#define NRDYENB		0x0038
#define BEMPENB		0x003A
#define INTSTS0		0x0040
#define INTSTS1		0x0042
#define BRDYSTS		0x0046
#define NRDYSTS		0x0048
#define BEMPSTS		0x004A
#define FRMNUM		0x004C
#define USBREQ		0x0054	/* USB request type register */
#define USBVAL		0x0056	/* USB request value register */
#define USBINDX		0x0058	/* USB request index register */
#define USBLENG		0x005A	/* USB request length register */
#define DCPCFG		0x005C
#define DCPMAXP		0x005E
#define DCPCTR		0x0060
#define PIPESEL		0x0064
#define PIPECFG		0x0068
#define PIPEBUF		0x006A
#define PIPEMAXP	0x006C
#define PIPEPERI	0x006E
#define PIPEnCTR	0x0070
#define PIPE1TRE	0x0090
#define PIPE1TRN	0x0092
#define PIPE2TRE	0x0094
#define PIPE2TRN	0x0096
#define PIPE3TRE	0x0098
#define PIPE3TRN	0x009A
#define PIPE4TRE	0x009C
#define PIPE4TRN	0x009E
#define PIPE5TRE	0x00A0
#define PIPE5TRN	0x00A2
#define PIPEBTRE	0x00A4
#define PIPEBTRN	0x00A6
#define PIPECTRE	0x00A8
#define PIPECTRN	0x00AA
#define PIPEDTRE	0x00AC
#define PIPEDTRN	0x00AE
#define PIPEETRE	0x00B0
#define PIPEETRN	0x00B2
#define PIPEFTRE	0x00B4
#define PIPEFTRN	0x00B6
#define PIPE9TRE	0x00B8
#define PIPE9TRN	0x00BA
#define PIPEATRE	0x00BC
#define PIPEATRN	0x00BE
#define DEVADD0		0x00D0 /* Device address n configuration */
#define DEVADD1		0x00D2
#define DEVADD2		0x00D4
#define DEVADD3		0x00D6
#define DEVADD4		0x00D8
#define DEVADD5		0x00DA
#define DEVADD6		0x00DC
#define DEVADD7		0x00DE
#define DEVADD8		0x00E0
#define DEVADD9		0x00E2
#define DEVADDA		0x00E4
#define D2FIFOSEL	0x00F0	/* for R-Car Gen2 */
#define D2FIFOCTR	0x00F2	/* for R-Car Gen2 */
#define D3FIFOSEL	0x00F4	/* for R-Car Gen2 */
#define D3FIFOCTR	0x00F6	/* for R-Car Gen2 */
#define SUSPMODE	0x0102	/* for RZ/A */

/* SYSCFG */
#define SCKE	(1 << 10)	/* USB Module Clock Enable */
#define CNEN	(1 << 8)	/* Single-ended receiver operation Enable */
#define HSE	(1 << 7)	/* High-Speed Operation Enable */
#define DCFM	(1 << 6)	/* Controller Function Select */
#define DRPD	(1 << 5)	/* D+ Line/D- Line Resistance Control */
#define DPRPU	(1 << 4)	/* D+ Line Resistance Control */
#define USBE	(1 << 0)	/* USB Module Operation Enable */
#define UCKSEL	(1 << 2)	/* Clock Select for RZ/A1 */
#define UPLLE	(1 << 1)	/* USB PLL Enable for RZ/A1 */

/* DVSTCTR */
#define EXTLP	(1 << 10)	/* Controls the EXTLP pin output state */
#define PWEN	(1 << 9)	/* Controls the PWEN pin output state */
#define USBRST	(1 << 6)	/* Bus Reset Output */
#define UACT	(1 << 4)	/* USB Bus Enable */
#define RHST	(0x7)		/* Reset Handshake */
#define  RHST_LOW_SPEED  1	/* Low-speed connection */
#define  RHST_FULL_SPEED 2	/* Full-speed connection */
#define  RHST_HIGH_SPEED 3	/* High-speed connection */

/* CFIFOSEL */
#define DREQE	(1 << 12)	/* DMA Transfer Request Enable */
#define MBW_32	(0x2 << 10)	/* CFIFO Port Access Bit Width */

/* CFIFOCTR */
#define BVAL	(1 << 15)	/* Buffer Memory Enable Flag */
#define BCLR	(1 << 14)	/* CPU buffer clear */
#define FRDY	(1 << 13)	/* FIFO Port Ready */
#define DTLN_MASK (0x0FFF)	/* Receive Data Length */

/* INTENB0 */
#define VBSE	(1 << 15)	/* Enable IRQ VBUS_0 and VBUSIN_0 */
#define RSME	(1 << 14)	/* Enable IRQ Resume */
#define SOFE	(1 << 13)	/* Enable IRQ Frame Number Update */
#define DVSE	(1 << 12)	/* Enable IRQ Device State Transition */
#define CTRE	(1 << 11)	/* Enable IRQ Control Stage Transition */
#define BEMPE	(1 << 10)	/* Enable IRQ Buffer Empty */
#define NRDYE	(1 << 9)	/* Enable IRQ Buffer Not Ready Response */
#define BRDYE	(1 << 8)	/* Enable IRQ Buffer Ready */

/* INTENB1 */
#define BCHGE	(1 << 14)	/* USB Bus Change Interrupt Enable */
#define DTCHE	(1 << 12)	/* Disconnection Detect Interrupt Enable */
#define ATTCHE	(1 << 11)	/* Connection Detect Interrupt Enable */
#define EOFERRE	(1 << 6)	/* EOF Error Detect Interrupt Enable */
#define SIGNE	(1 << 5)	/* Setup Transaction Error Interrupt Enable */
#define SACKE	(1 << 4)	/* Setup Transaction ACK Interrupt Enable */

/* INTSTS0 */
#define VBINT	(1 << 15)	/* VBUS0_0 and VBUS1_0 Interrupt Status */
#define DVST	(1 << 12)	/* Device State Transition Interrupt Status */
#define CTRT	(1 << 11)	/* Control Stage Interrupt Status */
#define BEMP	(1 << 10)	/* Buffer Empty Interrupt Status */
#define BRDY	(1 << 8)	/* Buffer Ready Interrupt Status */
#define VBSTS	(1 << 7)	/* VBUS_0 and VBUSIN_0 Input Status */
#define VALID	(1 << 3)	/* USB Request Receive */

#define DVSQ_MASK		(0x7 << 4)	/* Device State */
#define  POWER_STATE		(0 << 4)
#define  DEFAULT_STATE		(1 << 4)
#define  ADDRESS_STATE		(2 << 4)
#define  CONFIGURATION_STATE	(3 << 4)
#define  SUSPENDED_STATE	(4 << 4)

#define CTSQ_MASK		(0x7)	/* Control Transfer Stage */
#define  IDLE_SETUP_STAGE	0	/* Idle stage or setup stage */
#define  READ_DATA_STAGE	1	/* Control read data stage */
#define  READ_STATUS_STAGE	2	/* Control read status stage */
#define  WRITE_DATA_STAGE	3	/* Control write data stage */
#define  WRITE_STATUS_STAGE	4	/* Control write status stage */
#define  NODATA_STATUS_STAGE	5	/* Control write NoData status stage */
#define  SEQUENCE_ERROR		6	/* Control transfer sequence error */

/* INTSTS1 */
#define OVRCR	(1 << 15) /* OVRCR Interrupt Status */
#define BCHG	(1 << 14) /* USB Bus Change Interrupt Status */
#define DTCH	(1 << 12) /* USB Disconnection Detect Interrupt Status */
#define ATTCH	(1 << 11) /* ATTCH Interrupt Status */
#define EOFERR	(1 << 6)  /* EOF Error Detect Interrupt Status */
#define SIGN	(1 << 5)  /* Setup Transaction Error Interrupt Status */
#define SACK	(1 << 4)  /* Setup Transaction ACK Response Interrupt Status */

/* PIPECFG */
/* DCPCFG */
#define TYPE_NONE	(0 << 14)	/* Transfer Type */
#define TYPE_BULK	(1 << 14)
#define TYPE_INT	(2 << 14)
#define TYPE_ISO	(3 << 14)
#define BFRE		(1 << 10)	/* BRDY Interrupt Operation Spec. */
#define DBLB		(1 << 9)	/* Double Buffer Mode */
#define SHTNAK		(1 << 7)	/* Pipe Disable in Transfer End */
#define DIR_OUT		(1 << 4)	/* Transfer Direction */

/* PIPEMAXP */
/* DCPMAXP */
#define DEVSEL_MASK	(0xF << 12)	/* Device Select */
#define DCP_MAXP_MASK	(0x7F)
#define PIPE_MAXP_MASK	(0x7FF)

/* PIPEBUF */
#define BUFSIZE_SHIFT	10
#define BUFSIZE_MASK	(0x1F << BUFSIZE_SHIFT)
#define BUFNMB_MASK	(0xFF)

/* PIPEnCTR */
/* DCPCTR */
#define BSTS		(1 << 15)	/* Buffer Status */
#define SUREQ		(1 << 14)	/* Sending SETUP Token */
#define INBUFM		(1 << 14)	/* (PIPEnCTR) Transfer Buffer Monitor */
#define CSSTS		(1 << 12)	/* CSSTS Status */
#define	ACLRM		(1 << 9)	/* Buffer Auto-Clear Mode */
#define SQCLR		(1 << 8)	/* Toggle Bit Clear */
#define SQSET		(1 << 7)	/* Toggle Bit Set */
#define SQMON		(1 << 6)	/* Toggle Bit Check */
#define PBUSY		(1 << 5)	/* Pipe Busy */
#define PID_MASK	(0x3)		/* Response PID */
#define  PID_NAK	0
#define  PID_BUF	1
#define  PID_STALL10	2
#define  PID_STALL11	3

#define CCPL		(1 << 2)	/* Control Transfer End Enable */

/* PIPEnTRE */
#define TRENB		(1 << 9)	/* Transaction Counter Enable */
#define TRCLR		(1 << 8)	/* Transaction Counter Clear */

/* FRMNUM */
#define FRNM_MASK	(0x7FF)

/* DEVADDn */
#define UPPHUB(x)	(((x) & 0xF) << 11)	/* HUB Register */
#define HUBPORT(x)	(((x) & 0x7) << 8)	/* HUB Port for Target Device */
#define USBSPD(x)	(((x) & 0x3) << 6)	/* Device Transfer Rate */
#define USBSPD_SPEED_LOW	0x1
#define USBSPD_SPEED_FULL	0x2
#define USBSPD_SPEED_HIGH	0x3

/* SUSPMODE */
#define SUSPM		(1 << 14)	/* SuspendM Control */

/*
 *		struct
 */
struct usbhs_priv {

	void __iomem *base;
	unsigned int irq;
	unsigned long irqflags;

	const struct renesas_usbhs_platform_callback *pfunc;
	struct renesas_usbhs_driver_param	dparam;

	struct delayed_work notify_hotplug_work;
	struct platform_device *pdev;

	struct extcon_dev *edev;

	spinlock_t		lock;

	/*
	 * module control
	 */
	struct usbhs_mod_info mod_info;

	/*
	 * pipe control
	 */
	struct usbhs_pipe_info pipe_info;

	/*
	 * fifo control
	 */
	struct usbhs_fifo_info fifo_info;

	struct phy *phy;
	struct reset_control *rsts;
	struct clk *clks[2];
};

/*
 * common
 */
u16 usbhs_read(struct usbhs_priv *priv, u32 reg);
void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data);
void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data);

#define usbhs_lock(p, f) spin_lock_irqsave(usbhs_priv_to_lock(p), f)
#define usbhs_unlock(p, f) spin_unlock_irqrestore(usbhs_priv_to_lock(p), f)

int usbhs_get_id_as_gadget(struct platform_device *pdev);

/*
 * sysconfig
 */
void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable);
void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable);
void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable);
void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode);

/*
 * usb request
 */
void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);
void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);

/*
 * bus
 */
void usbhs_bus_send_sof_enable(struct usbhs_priv *priv);
void usbhs_bus_send_reset(struct usbhs_priv *priv);
int usbhs_bus_get_speed(struct usbhs_priv *priv);
int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable);
int usbhsc_schedule_notify_hotplug(struct platform_device *pdev);

/*
 * frame
 */
int usbhs_frame_get_num(struct usbhs_priv *priv);

/*
 * device config
 */
int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, u16 upphub,
			   u16 hubport, u16 speed);

/*
 * interrupt functions
 */
void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit);

/*
 * data
 */
struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev);
#define usbhs_get_dparam(priv, param)	(priv->dparam.param)
#define usbhs_priv_to_pdev(priv)	(priv->pdev)
#define usbhs_priv_to_dev(priv)		(&priv->pdev->dev)
#define usbhs_priv_to_lock(priv)	(&priv->lock)

#endif /* RENESAS_USB_DRIVER_H */