Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Tomi Valkeinen | 2121 | 97.16% | 1 | 14.29% |
H. Nikolaus Schaller | 45 | 2.06% | 2 | 28.57% |
Peter Ujfalusi | 14 | 0.64% | 2 | 28.57% |
Thomas Gleixner | 2 | 0.09% | 1 | 14.29% |
Julia Lawall | 1 | 0.05% | 1 | 14.29% |
Total | 2183 | 7 |
// SPDX-License-Identifier: GPL-2.0-only /* * Toppoly TD028TTEC1 panel support * * Copyright (C) 2008 Nokia Corporation * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> * * Neo 1973 code (jbt6k74.c): * Copyright (C) 2006-2007 by OpenMoko, Inc. * Author: Harald Welte <laforge@openmoko.org> * * Ported and adapted from Neo 1973 U-Boot by: * H. Nikolaus Schaller <hns@goldelico.com> */ #include <linux/module.h> #include <linux/delay.h> #include <linux/spi/spi.h> #include <linux/gpio.h> #include <video/omapfb_dss.h> struct panel_drv_data { struct omap_dss_device dssdev; struct omap_dss_device *in; int data_lines; struct omap_video_timings videomode; struct spi_device *spi_dev; }; static const struct omap_video_timings td028ttec1_panel_timings = { .x_res = 480, .y_res = 640, .pixelclock = 22153000, .hfp = 24, .hsw = 8, .hbp = 8, .vfp = 4, .vsw = 2, .vbp = 2, .vsync_level = OMAPDSS_SIG_ACTIVE_LOW, .hsync_level = OMAPDSS_SIG_ACTIVE_LOW, .data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE, .de_level = OMAPDSS_SIG_ACTIVE_HIGH, .sync_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE, }; #define JBT_COMMAND 0x000 #define JBT_DATA 0x100 static int jbt_ret_write_0(struct panel_drv_data *ddata, u8 reg) { int rc; u16 tx_buf = JBT_COMMAND | reg; rc = spi_write(ddata->spi_dev, (u8 *)&tx_buf, 1*sizeof(u16)); if (rc != 0) dev_err(&ddata->spi_dev->dev, "jbt_ret_write_0 spi_write ret %d\n", rc); return rc; } static int jbt_reg_write_1(struct panel_drv_data *ddata, u8 reg, u8 data) { int rc; u16 tx_buf[2]; tx_buf[0] = JBT_COMMAND | reg; tx_buf[1] = JBT_DATA | data; rc = spi_write(ddata->spi_dev, (u8 *)tx_buf, 2*sizeof(u16)); if (rc != 0) dev_err(&ddata->spi_dev->dev, "jbt_reg_write_1 spi_write ret %d\n", rc); return rc; } static int jbt_reg_write_2(struct panel_drv_data *ddata, u8 reg, u16 data) { int rc; u16 tx_buf[3]; tx_buf[0] = JBT_COMMAND | reg; tx_buf[1] = JBT_DATA | (data >> 8); tx_buf[2] = JBT_DATA | (data & 0xff); rc = spi_write(ddata->spi_dev, (u8 *)tx_buf, 3*sizeof(u16)); if (rc != 0) dev_err(&ddata->spi_dev->dev, "jbt_reg_write_2 spi_write ret %d\n", rc); return rc; } enum jbt_register { JBT_REG_SLEEP_IN = 0x10, JBT_REG_SLEEP_OUT = 0x11, JBT_REG_DISPLAY_OFF = 0x28, JBT_REG_DISPLAY_ON = 0x29, JBT_REG_RGB_FORMAT = 0x3a, JBT_REG_QUAD_RATE = 0x3b, JBT_REG_POWER_ON_OFF = 0xb0, JBT_REG_BOOSTER_OP = 0xb1, JBT_REG_BOOSTER_MODE = 0xb2, JBT_REG_BOOSTER_FREQ = 0xb3, JBT_REG_OPAMP_SYSCLK = 0xb4, JBT_REG_VSC_VOLTAGE = 0xb5, JBT_REG_VCOM_VOLTAGE = 0xb6, JBT_REG_EXT_DISPL = 0xb7, JBT_REG_OUTPUT_CONTROL = 0xb8, JBT_REG_DCCLK_DCEV = 0xb9, JBT_REG_DISPLAY_MODE1 = 0xba, JBT_REG_DISPLAY_MODE2 = 0xbb, JBT_REG_DISPLAY_MODE = 0xbc, JBT_REG_ASW_SLEW = 0xbd, JBT_REG_DUMMY_DISPLAY = 0xbe, JBT_REG_DRIVE_SYSTEM = 0xbf, JBT_REG_SLEEP_OUT_FR_A = 0xc0, JBT_REG_SLEEP_OUT_FR_B = 0xc1, JBT_REG_SLEEP_OUT_FR_C = 0xc2, JBT_REG_SLEEP_IN_LCCNT_D = 0xc3, JBT_REG_SLEEP_IN_LCCNT_E = 0xc4, JBT_REG_SLEEP_IN_LCCNT_F = 0xc5, JBT_REG_SLEEP_IN_LCCNT_G = 0xc6, JBT_REG_GAMMA1_FINE_1 = 0xc7, JBT_REG_GAMMA1_FINE_2 = 0xc8, JBT_REG_GAMMA1_INCLINATION = 0xc9, JBT_REG_GAMMA1_BLUE_OFFSET = 0xca, JBT_REG_BLANK_CONTROL = 0xcf, JBT_REG_BLANK_TH_TV = 0xd0, JBT_REG_CKV_ON_OFF = 0xd1, JBT_REG_CKV_1_2 = 0xd2, JBT_REG_OEV_TIMING = 0xd3, JBT_REG_ASW_TIMING_1 = 0xd4, JBT_REG_ASW_TIMING_2 = 0xd5, JBT_REG_HCLOCK_VGA = 0xec, JBT_REG_HCLOCK_QVGA = 0xed, }; #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) static int td028ttec1_panel_connect(struct omap_dss_device *dssdev) { struct panel_drv_data *ddata = to_panel_data(dssdev); struct omap_dss_device *in = ddata->in; int r; if (omapdss_device_is_connected(dssdev)) return 0; r = in->ops.dpi->connect(in, dssdev); if (r) return r; return 0; } static void td028ttec1_panel_disconnect(struct omap_dss_device *dssdev) { struct panel_drv_data *ddata = to_panel_data(dssdev); struct omap_dss_device *in = ddata->in; if (!omapdss_device_is_connected(dssdev)) return; in->ops.dpi->disconnect(in, dssdev); } static int td028ttec1_panel_enable(struct omap_dss_device *dssdev) { struct panel_drv_data *ddata = to_panel_data(dssdev); struct omap_dss_device *in = ddata->in; int r; if (!omapdss_device_is_connected(dssdev)) return -ENODEV; if (omapdss_device_is_enabled(dssdev)) return 0; if (ddata->data_lines) in->ops.dpi->set_data_lines(in, ddata->data_lines); in->ops.dpi->set_timings(in, &ddata->videomode); r = in->ops.dpi->enable(in); if (r) return r; dev_dbg(dssdev->dev, "td028ttec1_panel_enable() - state %d\n", dssdev->state); /* three times command zero */ r |= jbt_ret_write_0(ddata, 0x00); usleep_range(1000, 2000); r |= jbt_ret_write_0(ddata, 0x00); usleep_range(1000, 2000); r |= jbt_ret_write_0(ddata, 0x00); usleep_range(1000, 2000); if (r) { dev_warn(dssdev->dev, "transfer error\n"); goto transfer_err; } /* deep standby out */ r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x17); /* RGB I/F on, RAM write off, QVGA through, SIGCON enable */ r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE, 0x80); /* Quad mode off */ r |= jbt_reg_write_1(ddata, JBT_REG_QUAD_RATE, 0x00); /* AVDD on, XVDD on */ r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x16); /* Output control */ r |= jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0xfff9); /* Sleep mode off */ r |= jbt_ret_write_0(ddata, JBT_REG_SLEEP_OUT); /* at this point we have like 50% grey */ /* initialize register set */ r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE1, 0x01); r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE2, 0x00); r |= jbt_reg_write_1(ddata, JBT_REG_RGB_FORMAT, 0x60); r |= jbt_reg_write_1(ddata, JBT_REG_DRIVE_SYSTEM, 0x10); r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_OP, 0x56); r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_MODE, 0x33); r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11); r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11); r |= jbt_reg_write_1(ddata, JBT_REG_OPAMP_SYSCLK, 0x02); r |= jbt_reg_write_1(ddata, JBT_REG_VSC_VOLTAGE, 0x2b); r |= jbt_reg_write_1(ddata, JBT_REG_VCOM_VOLTAGE, 0x40); r |= jbt_reg_write_1(ddata, JBT_REG_EXT_DISPL, 0x03); r |= jbt_reg_write_1(ddata, JBT_REG_DCCLK_DCEV, 0x04); /* * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement * to avoid red / blue flicker */ r |= jbt_reg_write_1(ddata, JBT_REG_ASW_SLEW, 0x04); r |= jbt_reg_write_1(ddata, JBT_REG_DUMMY_DISPLAY, 0x00); r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_A, 0x11); r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_B, 0x11); r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_C, 0x11); r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040); r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0); r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020); r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0); r |= jbt_reg_write_2(ddata, JBT_REG_GAMMA1_FINE_1, 0x5533); r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_FINE_2, 0x00); r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_INCLINATION, 0x00); r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00); r |= jbt_reg_write_2(ddata, JBT_REG_HCLOCK_VGA, 0x1f0); r |= jbt_reg_write_1(ddata, JBT_REG_BLANK_CONTROL, 0x02); r |= jbt_reg_write_2(ddata, JBT_REG_BLANK_TH_TV, 0x0804); r |= jbt_reg_write_1(ddata, JBT_REG_CKV_ON_OFF, 0x01); r |= jbt_reg_write_2(ddata, JBT_REG_CKV_1_2, 0x0000); r |= jbt_reg_write_2(ddata, JBT_REG_OEV_TIMING, 0x0d0e); r |= jbt_reg_write_2(ddata, JBT_REG_ASW_TIMING_1, 0x11a4); r |= jbt_reg_write_1(ddata, JBT_REG_ASW_TIMING_2, 0x0e); r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON); dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; transfer_err: return r ? -EIO : 0; } static void td028ttec1_panel_disable(struct omap_dss_device *dssdev) { struct panel_drv_data *ddata = to_panel_data(dssdev); struct omap_dss_device *in = ddata->in; if (!omapdss_device_is_enabled(dssdev)) return; dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n"); jbt_ret_write_0(ddata, JBT_REG_DISPLAY_OFF); jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0x8002); jbt_ret_write_0(ddata, JBT_REG_SLEEP_IN); jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x00); in->ops.dpi->disable(in); dssdev->state = OMAP_DSS_DISPLAY_DISABLED; } static void td028ttec1_panel_set_timings(struct omap_dss_device *dssdev, struct omap_video_timings *timings) { struct panel_drv_data *ddata = to_panel_data(dssdev); struct omap_dss_device *in = ddata->in; ddata->videomode = *timings; dssdev->panel.timings = *timings; in->ops.dpi->set_timings(in, timings); } static void td028ttec1_panel_get_timings(struct omap_dss_device *dssdev, struct omap_video_timings *timings) { struct panel_drv_data *ddata = to_panel_data(dssdev); *timings = ddata->videomode; } static int td028ttec1_panel_check_timings(struct omap_dss_device *dssdev, struct omap_video_timings *timings) { struct panel_drv_data *ddata = to_panel_data(dssdev); struct omap_dss_device *in = ddata->in; return in->ops.dpi->check_timings(in, timings); } static struct omap_dss_driver td028ttec1_ops = { .connect = td028ttec1_panel_connect, .disconnect = td028ttec1_panel_disconnect, .enable = td028ttec1_panel_enable, .disable = td028ttec1_panel_disable, .set_timings = td028ttec1_panel_set_timings, .get_timings = td028ttec1_panel_get_timings, .check_timings = td028ttec1_panel_check_timings, }; static int td028ttec1_probe_of(struct spi_device *spi) { struct device_node *node = spi->dev.of_node; struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); struct omap_dss_device *in; in = omapdss_of_find_source_for_first_ep(node); if (IS_ERR(in)) { dev_err(&spi->dev, "failed to find video source\n"); return PTR_ERR(in); } ddata->in = in; return 0; } static int td028ttec1_panel_probe(struct spi_device *spi) { struct panel_drv_data *ddata; struct omap_dss_device *dssdev; int r; dev_dbg(&spi->dev, "%s\n", __func__); if (!spi->dev.of_node) return -ENODEV; spi->bits_per_word = 9; spi->mode = SPI_MODE_3; r = spi_setup(spi); if (r < 0) { dev_err(&spi->dev, "spi_setup failed: %d\n", r); return r; } ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL); if (ddata == NULL) return -ENOMEM; dev_set_drvdata(&spi->dev, ddata); ddata->spi_dev = spi; r = td028ttec1_probe_of(spi); if (r) return r; ddata->videomode = td028ttec1_panel_timings; dssdev = &ddata->dssdev; dssdev->dev = &spi->dev; dssdev->driver = &td028ttec1_ops; dssdev->type = OMAP_DISPLAY_TYPE_DPI; dssdev->owner = THIS_MODULE; dssdev->panel.timings = ddata->videomode; dssdev->phy.dpi.data_lines = ddata->data_lines; r = omapdss_register_display(dssdev); if (r) { dev_err(&spi->dev, "Failed to register panel\n"); goto err_reg; } return 0; err_reg: omap_dss_put_device(ddata->in); return r; } static int td028ttec1_panel_remove(struct spi_device *spi) { struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); struct omap_dss_device *dssdev = &ddata->dssdev; struct omap_dss_device *in = ddata->in; dev_dbg(&ddata->spi_dev->dev, "%s\n", __func__); omapdss_unregister_display(dssdev); td028ttec1_panel_disable(dssdev); td028ttec1_panel_disconnect(dssdev); omap_dss_put_device(in); return 0; } static const struct of_device_id td028ttec1_of_match[] = { { .compatible = "omapdss,tpo,td028ttec1", }, /* keep to not break older DTB */ { .compatible = "omapdss,toppoly,td028ttec1", }, {}, }; MODULE_DEVICE_TABLE(of, td028ttec1_of_match); static const struct spi_device_id td028ttec1_ids[] = { { "toppoly,td028ttec1", 0 }, { "tpo,td028ttec1", 0}, { /* sentinel */ } }; MODULE_DEVICE_TABLE(spi, td028ttec1_ids); static struct spi_driver td028ttec1_spi_driver = { .probe = td028ttec1_panel_probe, .remove = td028ttec1_panel_remove, .id_table = td028ttec1_ids, .driver = { .name = "panel-tpo-td028ttec1", .of_match_table = td028ttec1_of_match, .suppress_bind_attrs = true, }, }; module_spi_driver(td028ttec1_spi_driver); MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>"); MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1