Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
John Lenz | 3737 | 86.46% | 4 | 10.26% |
Richard Purdie | 179 | 4.14% | 3 | 7.69% |
Eric Miao | 141 | 3.26% | 3 | 7.69% |
H Hartley Sweeten | 47 | 1.09% | 3 | 7.69% |
Russell King | 44 | 1.02% | 8 | 20.51% |
Lennert Buytenhek | 30 | 0.69% | 1 | 2.56% |
Pavel Machek | 30 | 0.69% | 2 | 5.13% |
Dirk Opfer | 27 | 0.62% | 1 | 2.56% |
Thomas Kunze | 23 | 0.53% | 1 | 2.56% |
Rafael J. Wysocki | 17 | 0.39% | 1 | 2.56% |
Kay Sievers | 14 | 0.32% | 1 | 2.56% |
Thomas Gleixner | 12 | 0.28% | 6 | 15.38% |
David Vrabel | 10 | 0.23% | 1 | 2.56% |
David Brownell | 6 | 0.14% | 1 | 2.56% |
Rob Herring | 3 | 0.07% | 1 | 2.56% |
Jiang Liu | 1 | 0.02% | 1 | 2.56% |
Dmitry Eremin-Solenikov | 1 | 0.02% | 1 | 2.56% |
Total | 4322 | 39 |
// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/common/locomo.c * * Sharp LoCoMo support * * This file contains all generic LoCoMo support. * * All initialization functions provided here are intended to be called * from machine specific code with proper arguments when required. * * Based on sa1111.c */ #include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/delay.h> #include <linux/errno.h> #include <linux/ioport.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/io.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h> #include <asm/hardware/locomo.h> /* LoCoMo Interrupts */ #define IRQ_LOCOMO_KEY (0) #define IRQ_LOCOMO_GPIO (1) #define IRQ_LOCOMO_LT (2) #define IRQ_LOCOMO_SPI (3) /* M62332 output channel selection */ #define M62332_EVR_CH 1 /* M62332 volume channel number */ /* 0 : CH.1 , 1 : CH. 2 */ /* DAC send data */ #define M62332_SLAVE_ADDR 0x4e /* Slave address */ #define M62332_W_BIT 0x00 /* W bit (0 only) */ #define M62332_SUB_ADDR 0x00 /* Sub address */ #define M62332_A_BIT 0x00 /* A bit (0 only) */ /* DAC setup and hold times (expressed in us) */ #define DAC_BUS_FREE_TIME 5 /* 4.7 us */ #define DAC_START_SETUP_TIME 5 /* 4.7 us */ #define DAC_STOP_SETUP_TIME 4 /* 4.0 us */ #define DAC_START_HOLD_TIME 5 /* 4.7 us */ #define DAC_SCL_LOW_HOLD_TIME 5 /* 4.7 us */ #define DAC_SCL_HIGH_HOLD_TIME 4 /* 4.0 us */ #define DAC_DATA_SETUP_TIME 1 /* 250 ns */ #define DAC_DATA_HOLD_TIME 1 /* 300 ns */ #define DAC_LOW_SETUP_TIME 1 /* 300 ns */ #define DAC_HIGH_SETUP_TIME 1 /* 1000 ns */ /* the following is the overall data for the locomo chip */ struct locomo { struct device *dev; unsigned long phys; unsigned int irq; int irq_base; spinlock_t lock; void __iomem *base; #ifdef CONFIG_PM void *saved_state; #endif }; struct locomo_dev_info { unsigned long offset; unsigned long length; unsigned int devid; unsigned int irq[1]; const char * name; }; /* All the locomo devices. If offset is non-zero, the mapbase for the * locomo_dev will be set to the chip base plus offset. If offset is * zero, then the mapbase for the locomo_dev will be set to zero. An * offset of zero means the device only uses GPIOs or other helper * functions inside this file */ static struct locomo_dev_info locomo_devices[] = { { .devid = LOCOMO_DEVID_KEYBOARD, .irq = { IRQ_LOCOMO_KEY }, .name = "locomo-keyboard", .offset = LOCOMO_KEYBOARD, .length = 16, }, { .devid = LOCOMO_DEVID_FRONTLIGHT, .irq = {}, .name = "locomo-frontlight", .offset = LOCOMO_FRONTLIGHT, .length = 8, }, { .devid = LOCOMO_DEVID_BACKLIGHT, .irq = {}, .name = "locomo-backlight", .offset = LOCOMO_BACKLIGHT, .length = 8, }, { .devid = LOCOMO_DEVID_AUDIO, .irq = {}, .name = "locomo-audio", .offset = LOCOMO_AUDIO, .length = 4, }, { .devid = LOCOMO_DEVID_LED, .irq = {}, .name = "locomo-led", .offset = LOCOMO_LED, .length = 8, }, { .devid = LOCOMO_DEVID_UART, .irq = {}, .name = "locomo-uart", .offset = 0, .length = 0, }, { .devid = LOCOMO_DEVID_SPI, .irq = {}, .name = "locomo-spi", .offset = LOCOMO_SPI, .length = 0x30, }, }; static void locomo_handler(struct irq_desc *desc) { struct locomo *lchip = irq_desc_get_handler_data(desc); int req, i; /* Acknowledge the parent IRQ */ desc->irq_data.chip->irq_ack(&desc->irq_data); /* check why this interrupt was generated */ req = locomo_readl(lchip->base + LOCOMO_ICR) & 0x0f00; if (req) { unsigned int irq; /* generate the next interrupt(s) */ irq = lchip->irq_base; for (i = 0; i <= 3; i++, irq++) { if (req & (0x0100 << i)) { generic_handle_irq(irq); } } } } static void locomo_ack_irq(struct irq_data *d) { } static void locomo_mask_irq(struct irq_data *d) { struct locomo *lchip = irq_data_get_irq_chip_data(d); unsigned int r; r = locomo_readl(lchip->base + LOCOMO_ICR); r &= ~(0x0010 << (d->irq - lchip->irq_base)); locomo_writel(r, lchip->base + LOCOMO_ICR); } static void locomo_unmask_irq(struct irq_data *d) { struct locomo *lchip = irq_data_get_irq_chip_data(d); unsigned int r; r = locomo_readl(lchip->base + LOCOMO_ICR); r |= (0x0010 << (d->irq - lchip->irq_base)); locomo_writel(r, lchip->base + LOCOMO_ICR); } static struct irq_chip locomo_chip = { .name = "LOCOMO", .irq_ack = locomo_ack_irq, .irq_mask = locomo_mask_irq, .irq_unmask = locomo_unmask_irq, }; static void locomo_setup_irq(struct locomo *lchip) { int irq = lchip->irq_base; /* * Install handler for IRQ_LOCOMO_HW. */ irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING); irq_set_chained_handler_and_data(lchip->irq, locomo_handler, lchip); /* Install handlers for IRQ_LOCOMO_* */ for ( ; irq <= lchip->irq_base + 3; irq++) { irq_set_chip_and_handler(irq, &locomo_chip, handle_level_irq); irq_set_chip_data(irq, lchip); irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); } } static void locomo_dev_release(struct device *_dev) { struct locomo_dev *dev = LOCOMO_DEV(_dev); kfree(dev); } static int locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info) { struct locomo_dev *dev; int ret; dev = kzalloc(sizeof(struct locomo_dev), GFP_KERNEL); if (!dev) { ret = -ENOMEM; goto out; } /* * If the parent device has a DMA mask associated with it, * propagate it down to the children. */ if (lchip->dev->dma_mask) { dev->dma_mask = *lchip->dev->dma_mask; dev->dev.dma_mask = &dev->dma_mask; } dev_set_name(&dev->dev, "%s", info->name); dev->devid = info->devid; dev->dev.parent = lchip->dev; dev->dev.bus = &locomo_bus_type; dev->dev.release = locomo_dev_release; dev->dev.coherent_dma_mask = lchip->dev->coherent_dma_mask; if (info->offset) dev->mapbase = lchip->base + info->offset; else dev->mapbase = 0; dev->length = info->length; dev->irq[0] = (lchip->irq_base == NO_IRQ) ? NO_IRQ : lchip->irq_base + info->irq[0]; ret = device_register(&dev->dev); if (ret) { out: kfree(dev); } return ret; } #ifdef CONFIG_PM struct locomo_save_data { u16 LCM_GPO; u16 LCM_SPICT; u16 LCM_GPE; u16 LCM_ASD; u16 LCM_SPIMD; }; static int locomo_suspend(struct platform_device *dev, pm_message_t state) { struct locomo *lchip = platform_get_drvdata(dev); struct locomo_save_data *save; unsigned long flags; save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL); if (!save) return -ENOMEM; lchip->saved_state = save; spin_lock_irqsave(&lchip->lock, flags); save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */ locomo_writel(0x00, lchip->base + LOCOMO_GPO); save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */ locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT); save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */ locomo_writel(0x00, lchip->base + LOCOMO_GPE); save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */ locomo_writel(0x00, lchip->base + LOCOMO_ASD); save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPIMD); /* SPI */ locomo_writel(0x3C14, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD); locomo_writel(0x00, lchip->base + LOCOMO_PAIF); locomo_writel(0x00, lchip->base + LOCOMO_DAC); locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC); if ((locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88)) locomo_writel(0x00, lchip->base + LOCOMO_C32K); /* CLK32 off */ else /* 18MHz already enabled, so no wait */ locomo_writel(0xc1, lchip->base + LOCOMO_C32K); /* CLK32 on */ locomo_writel(0x00, lchip->base + LOCOMO_TADC); /* 18MHz clock off*/ locomo_writel(0x00, lchip->base + LOCOMO_AUDIO + LOCOMO_ACC); /* 22MHz/24MHz clock off */ locomo_writel(0x00, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); /* FL */ spin_unlock_irqrestore(&lchip->lock, flags); return 0; } static int locomo_resume(struct platform_device *dev) { struct locomo *lchip = platform_get_drvdata(dev); struct locomo_save_data *save; unsigned long r; unsigned long flags; save = lchip->saved_state; if (!save) return 0; spin_lock_irqsave(&lchip->lock, flags); locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO); locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPI + LOCOMO_SPICT); locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE); locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD); locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD); locomo_writel(0x00, lchip->base + LOCOMO_C32K); locomo_writel(0x90, lchip->base + LOCOMO_TADC); locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KSC); r = locomo_readl(lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC); r &= 0xFEFF; locomo_writel(r, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC); locomo_writel(0x1, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KCMD); spin_unlock_irqrestore(&lchip->lock, flags); lchip->saved_state = NULL; kfree(save); return 0; } #endif /** * locomo_probe - probe for a single LoCoMo chip. * @phys_addr: physical address of device. * * Probe for a LoCoMo chip. This must be called * before any other locomo-specific code. * * Returns: * %-ENODEV device not found. * %-EBUSY physical address already marked in-use. * %0 successful. */ static int __locomo_probe(struct device *me, struct resource *mem, int irq) { struct locomo_platform_data *pdata = me->platform_data; struct locomo *lchip; unsigned long r; int i, ret = -ENODEV; lchip = kzalloc(sizeof(struct locomo), GFP_KERNEL); if (!lchip) return -ENOMEM; spin_lock_init(&lchip->lock); lchip->dev = me; dev_set_drvdata(lchip->dev, lchip); lchip->phys = mem->start; lchip->irq = irq; lchip->irq_base = (pdata) ? pdata->irq_base : NO_IRQ; /* * Map the whole region. This also maps the * registers for our children. */ lchip->base = ioremap(mem->start, PAGE_SIZE); if (!lchip->base) { ret = -ENOMEM; goto out; } /* locomo initialize */ locomo_writel(0, lchip->base + LOCOMO_ICR); /* KEYBOARD */ locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC); /* GPIO */ locomo_writel(0, lchip->base + LOCOMO_GPO); locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14)) , lchip->base + LOCOMO_GPE); locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14)) , lchip->base + LOCOMO_GPD); locomo_writel(0, lchip->base + LOCOMO_GIE); /* Frontlight */ locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD); /* Longtime timer */ locomo_writel(0, lchip->base + LOCOMO_LTINT); /* SPI */ locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE); locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD); r = locomo_readl(lchip->base + LOCOMO_ASD); r |= 0x8000; locomo_writel(r, lchip->base + LOCOMO_ASD); locomo_writel(6 + 8 + 320 + 30 - 10 - 128 + 4, lchip->base + LOCOMO_HSD); r = locomo_readl(lchip->base + LOCOMO_HSD); r |= 0x8000; locomo_writel(r, lchip->base + LOCOMO_HSD); locomo_writel(128 / 8, lchip->base + LOCOMO_HSC); /* XON */ locomo_writel(0x80, lchip->base + LOCOMO_TADC); udelay(1000); /* CLK9MEN */ r = locomo_readl(lchip->base + LOCOMO_TADC); r |= 0x10; locomo_writel(r, lchip->base + LOCOMO_TADC); udelay(100); /* init DAC */ r = locomo_readl(lchip->base + LOCOMO_DAC); r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB; locomo_writel(r, lchip->base + LOCOMO_DAC); r = locomo_readl(lchip->base + LOCOMO_VER); printk(KERN_INFO "LoCoMo Chip: %lu%lu\n", (r >> 8), (r & 0xff)); /* * The interrupt controller must be initialised before any * other device to ensure that the interrupts are available. */ if (lchip->irq != NO_IRQ && lchip->irq_base != NO_IRQ) locomo_setup_irq(lchip); for (i = 0; i < ARRAY_SIZE(locomo_devices); i++) locomo_init_one_child(lchip, &locomo_devices[i]); return 0; out: kfree(lchip); return ret; } static int locomo_remove_child(struct device *dev, void *data) { device_unregister(dev); return 0; } static void __locomo_remove(struct locomo *lchip) { device_for_each_child(lchip->dev, NULL, locomo_remove_child); if (lchip->irq != NO_IRQ) { irq_set_chained_handler_and_data(lchip->irq, NULL, NULL); } iounmap(lchip->base); kfree(lchip); } static int locomo_probe(struct platform_device *dev) { struct resource *mem; int irq; mem = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!mem) return -EINVAL; irq = platform_get_irq(dev, 0); if (irq < 0) return -ENXIO; return __locomo_probe(&dev->dev, mem, irq); } static int locomo_remove(struct platform_device *dev) { struct locomo *lchip = platform_get_drvdata(dev); if (lchip) { __locomo_remove(lchip); platform_set_drvdata(dev, NULL); } return 0; } /* * Not sure if this should be on the system bus or not yet. * We really want some way to register a system device at * the per-machine level, and then have this driver pick * up the registered devices. */ static struct platform_driver locomo_device_driver = { .probe = locomo_probe, .remove = locomo_remove, #ifdef CONFIG_PM .suspend = locomo_suspend, .resume = locomo_resume, #endif .driver = { .name = "locomo", }, }; /* * Get the parent device driver (us) structure * from a child function device */ static inline struct locomo *locomo_chip_driver(struct locomo_dev *ldev) { return (struct locomo *)dev_get_drvdata(ldev->dev.parent); } void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir) { struct locomo *lchip = dev_get_drvdata(dev); unsigned long flags; unsigned int r; if (!lchip) return; spin_lock_irqsave(&lchip->lock, flags); r = locomo_readl(lchip->base + LOCOMO_GPD); if (dir) r |= bits; else r &= ~bits; locomo_writel(r, lchip->base + LOCOMO_GPD); r = locomo_readl(lchip->base + LOCOMO_GPE); if (dir) r |= bits; else r &= ~bits; locomo_writel(r, lchip->base + LOCOMO_GPE); spin_unlock_irqrestore(&lchip->lock, flags); } EXPORT_SYMBOL(locomo_gpio_set_dir); int locomo_gpio_read_level(struct device *dev, unsigned int bits) { struct locomo *lchip = dev_get_drvdata(dev); unsigned long flags; unsigned int ret; if (!lchip) return -ENODEV; spin_lock_irqsave(&lchip->lock, flags); ret = locomo_readl(lchip->base + LOCOMO_GPL); spin_unlock_irqrestore(&lchip->lock, flags); ret &= bits; return ret; } EXPORT_SYMBOL(locomo_gpio_read_level); int locomo_gpio_read_output(struct device *dev, unsigned int bits) { struct locomo *lchip = dev_get_drvdata(dev); unsigned long flags; unsigned int ret; if (!lchip) return -ENODEV; spin_lock_irqsave(&lchip->lock, flags); ret = locomo_readl(lchip->base + LOCOMO_GPO); spin_unlock_irqrestore(&lchip->lock, flags); ret &= bits; return ret; } EXPORT_SYMBOL(locomo_gpio_read_output); void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set) { struct locomo *lchip = dev_get_drvdata(dev); unsigned long flags; unsigned int r; if (!lchip) return; spin_lock_irqsave(&lchip->lock, flags); r = locomo_readl(lchip->base + LOCOMO_GPO); if (set) r |= bits; else r &= ~bits; locomo_writel(r, lchip->base + LOCOMO_GPO); spin_unlock_irqrestore(&lchip->lock, flags); } EXPORT_SYMBOL(locomo_gpio_write); static void locomo_m62332_sendbit(void *mapbase, int bit) { unsigned int r; r = locomo_readl(mapbase + LOCOMO_DAC); r &= ~(LOCOMO_DAC_SCLOEB); locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */ udelay(DAC_DATA_HOLD_TIME); /* 300 nsec */ r = locomo_readl(mapbase + LOCOMO_DAC); r &= ~(LOCOMO_DAC_SCLOEB); locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */ udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */ if (bit & 1) { r = locomo_readl(mapbase + LOCOMO_DAC); r |= LOCOMO_DAC_SDAOEB; locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */ } else { r = locomo_readl(mapbase + LOCOMO_DAC); r &= ~(LOCOMO_DAC_SDAOEB); locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */ } udelay(DAC_DATA_SETUP_TIME); /* 250 nsec */ r = locomo_readl(mapbase + LOCOMO_DAC); r |= LOCOMO_DAC_SCLOEB; locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */ udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.0 usec */ } void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel) { struct locomo *lchip = locomo_chip_driver(ldev); int i; unsigned char data; unsigned int r; void *mapbase = lchip->base; unsigned long flags; spin_lock_irqsave(&lchip->lock, flags); /* Start */ udelay(DAC_BUS_FREE_TIME); /* 5.0 usec */ r = locomo_readl(mapbase + LOCOMO_DAC); r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB; locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */ udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.0 usec */ r = locomo_readl(mapbase + LOCOMO_DAC); r &= ~(LOCOMO_DAC_SDAOEB); locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_START_HOLD_TIME); /* 5.0 usec */ udelay(DAC_DATA_HOLD_TIME); /* 300 nsec */ /* Send slave address and W bit (LSB is W bit) */ data = (M62332_SLAVE_ADDR << 1) | M62332_W_BIT; for (i = 1; i <= 8; i++) { locomo_m62332_sendbit(mapbase, data >> (8 - i)); } /* Check A bit */ r = locomo_readl(mapbase + LOCOMO_DAC); r &= ~(LOCOMO_DAC_SCLOEB); locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */ udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */ r = locomo_readl(mapbase + LOCOMO_DAC); r &= ~(LOCOMO_DAC_SDAOEB); locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */ r = locomo_readl(mapbase + LOCOMO_DAC); r |= LOCOMO_DAC_SCLOEB; locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */ udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 1\n"); goto out; } /* Send Sub address (LSB is channel select) */ /* channel = 0 : ch1 select */ /* = 1 : ch2 select */ data = M62332_SUB_ADDR + channel; for (i = 1; i <= 8; i++) { locomo_m62332_sendbit(mapbase, data >> (8 - i)); } /* Check A bit */ r = locomo_readl(mapbase + LOCOMO_DAC); r &= ~(LOCOMO_DAC_SCLOEB); locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */ udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */ r = locomo_readl(mapbase + LOCOMO_DAC); r &= ~(LOCOMO_DAC_SDAOEB); locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */ r = locomo_readl(mapbase + LOCOMO_DAC); r |= LOCOMO_DAC_SCLOEB; locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */ udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 2\n"); goto out; } /* Send DAC data */ for (i = 1; i <= 8; i++) { locomo_m62332_sendbit(mapbase, dac_data >> (8 - i)); } /* Check A bit */ r = locomo_readl(mapbase + LOCOMO_DAC); r &= ~(LOCOMO_DAC_SCLOEB); locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */ udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */ r = locomo_readl(mapbase + LOCOMO_DAC); r &= ~(LOCOMO_DAC_SDAOEB); locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */ r = locomo_readl(mapbase + LOCOMO_DAC); r |= LOCOMO_DAC_SCLOEB; locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */ udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 3\n"); } out: /* stop */ r = locomo_readl(mapbase + LOCOMO_DAC); r &= ~(LOCOMO_DAC_SCLOEB); locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */ udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */ r = locomo_readl(mapbase + LOCOMO_DAC); r |= LOCOMO_DAC_SCLOEB; locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */ udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4 usec */ r = locomo_readl(mapbase + LOCOMO_DAC); r |= LOCOMO_DAC_SDAOEB; locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */ udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4 usec */ r = locomo_readl(mapbase + LOCOMO_DAC); r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB; locomo_writel(r, mapbase + LOCOMO_DAC); udelay(DAC_LOW_SETUP_TIME); /* 1000 nsec */ udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */ spin_unlock_irqrestore(&lchip->lock, flags); } EXPORT_SYMBOL(locomo_m62332_senddata); /* * Frontlight control */ void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf) { unsigned long flags; struct locomo *lchip = locomo_chip_driver(dev); if (vr) locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 1); else locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 0); spin_lock_irqsave(&lchip->lock, flags); locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); udelay(100); locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD); locomo_writel(bpwf | LOCOMO_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); spin_unlock_irqrestore(&lchip->lock, flags); } EXPORT_SYMBOL(locomo_frontlight_set); /* * LoCoMo "Register Access Bus." * * We model this as a regular bus type, and hang devices directly * off this. */ static int locomo_match(struct device *_dev, struct device_driver *_drv) { struct locomo_dev *dev = LOCOMO_DEV(_dev); struct locomo_driver *drv = LOCOMO_DRV(_drv); return dev->devid == drv->devid; } static int locomo_bus_probe(struct device *dev) { struct locomo_dev *ldev = LOCOMO_DEV(dev); struct locomo_driver *drv = LOCOMO_DRV(dev->driver); int ret = -ENODEV; if (drv->probe) ret = drv->probe(ldev); return ret; } static int locomo_bus_remove(struct device *dev) { struct locomo_dev *ldev = LOCOMO_DEV(dev); struct locomo_driver *drv = LOCOMO_DRV(dev->driver); int ret = 0; if (drv->remove) ret = drv->remove(ldev); return ret; } struct bus_type locomo_bus_type = { .name = "locomo-bus", .match = locomo_match, .probe = locomo_bus_probe, .remove = locomo_bus_remove, }; int locomo_driver_register(struct locomo_driver *driver) { driver->drv.bus = &locomo_bus_type; return driver_register(&driver->drv); } EXPORT_SYMBOL(locomo_driver_register); void locomo_driver_unregister(struct locomo_driver *driver) { driver_unregister(&driver->drv); } EXPORT_SYMBOL(locomo_driver_unregister); static int __init locomo_init(void) { int ret = bus_register(&locomo_bus_type); if (ret == 0) platform_driver_register(&locomo_device_driver); return ret; } static void __exit locomo_exit(void) { platform_driver_unregister(&locomo_device_driver); bus_unregister(&locomo_bus_type); } module_init(locomo_init); module_exit(locomo_exit); MODULE_DESCRIPTION("Sharp LoCoMo core driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1