Contributors: 25
Author Tokens Token Proportion Commits Commit Proportion
Valentin Longchamp 1299 60.03% 18 24.00%
Philippe Rétornaz 378 17.47% 8 10.67%
Uwe Kleine-König 167 7.72% 12 16.00%
Sascha Hauer 123 5.68% 5 6.67%
Alexander Shiyan 77 3.56% 3 4.00%
Vladimir Zapolskiy 41 1.89% 1 1.33%
Shawn Guo 36 1.66% 9 12.00%
Russell King 9 0.42% 2 2.67%
Andres Salomon 5 0.23% 1 1.33%
David Jander 4 0.18% 1 1.33%
Paul Gortmaker 3 0.14% 1 1.33%
Tejun Heo 3 0.14% 1 1.33%
Stephen Warren 2 0.09% 1 1.33%
Thomas Gleixner 2 0.09% 1 1.33%
Linus Walleij 2 0.09% 1 1.33%
Igor Grinberg 2 0.09% 1 1.33%
Christoph Hellwig 2 0.09% 1 1.33%
Yong Shen 2 0.09% 1 1.33%
Robert Schwebel 1 0.05% 1 1.33%
Johannes Berg 1 0.05% 1 1.33%
Benoît Thébaudeau 1 0.05% 1 1.33%
Nico Pitre 1 0.05% 1 1.33%
Richard Zhao 1 0.05% 1 1.33%
Fabian Frederick 1 0.05% 1 1.33%
Trent Piepho 1 0.05% 1 1.33%
Total 2164 75 


// SPDX-License-Identifier: GPL-2.0-or-later
/*
 *  Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group
 */

#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/gfp.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/moduleparam.h>
#include <linux/leds.h>
#include <linux/memory.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/types.h>
#include <linux/memblock.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/input.h>

#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
#include <linux/platform_data/asoc-imx-ssi.h>

#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"

static unsigned int moboard_pins[] = {
	/* UART0 */
	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
	MX31_PIN_CTS1__GPIO2_7,
	/* UART4 */
	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
	/* I2C0 */
	MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
	/* I2C1 */
	MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
	/* SDHC1 */
	MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
	MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
	MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
	/* USB reset */
	MX31_PIN_GPIO1_0__GPIO1_0,
	/* USB OTG */
	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
	MX31_PIN_USB_OC__GPIO1_30,
	/* USB H2 */
	MX31_PIN_USBH2_DATA0__USBH2_DATA0,
	MX31_PIN_USBH2_DATA1__USBH2_DATA1,
	MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
	MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
	MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
	MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
	MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
	MX31_PIN_SCK6__GPIO1_25,
	/* LEDs */
	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
	/* SPI1 */
	MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
	MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
	MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
	/* Atlas IRQ */
	MX31_PIN_GPIO1_3__GPIO1_3,
	/* SPI2 */
	MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
	MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
	MX31_PIN_CSPI2_SS1__CSPI3_SS1,
	/* SSI */
	MX31_PIN_STXD4__STXD4, MX31_PIN_SRXD4__SRXD4,
	MX31_PIN_SCK4__SCK4, MX31_PIN_SFS4__SFS4,
};

static struct physmap_flash_data mx31moboard_flash_data = {
	.width	= 2,
};

static struct resource mx31moboard_flash_resource = {
	.start	= 0xa0000000,
	.end	= 0xa1ffffff,
	.flags	= IORESOURCE_MEM,
};

static struct platform_device mx31moboard_flash = {
	.name	= "physmap-flash",
	.id	= 0,
	.dev	= {
		.platform_data  = &mx31moboard_flash_data,
	},
	.resource = &mx31moboard_flash_resource,
	.num_resources = 1,
};

static void __init moboard_uart0_init(void)
{
	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack")) {
		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
		gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
	}
}

static const struct imxuart_platform_data uart0_pdata __initconst = {
};

static const struct imxuart_platform_data uart4_pdata __initconst = {
	.flags = IMXUART_HAVE_RTSCTS,
};

static const struct imxi2c_platform_data moboard_i2c0_data __initconst = {
	.bitrate = 400000,
};

static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
	.bitrate = 100000,
};

static struct regulator_consumer_supply sdhc_consumers[] = {
	{
		.dev_name = "imx31-mmc.0",
		.supply	= "sdhc0_vcc",
	},
	{
		.dev_name = "imx31-mmc.1",
		.supply	= "sdhc1_vcc",
	},
};

static struct regulator_init_data sdhc_vreg_data = {
	.constraints = {
		.min_uV = 2700000,
		.max_uV = 3000000,
		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
		.valid_modes_mask = REGULATOR_MODE_NORMAL |
			REGULATOR_MODE_FAST,
		.always_on = 0,
		.boot_on = 1,
	},
	.num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
	.consumer_supplies = sdhc_consumers,
};

static struct regulator_consumer_supply cam_consumers[] = {
	{
		.dev_name = "mx3_camera.0",
		.supply = "cam_vcc",
	},
};

static struct regulator_init_data cam_vreg_data = {
	.constraints = {
		.min_uV = 2700000,
		.max_uV = 3000000,
		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
		.valid_modes_mask = REGULATOR_MODE_NORMAL |
			REGULATOR_MODE_FAST,
		.always_on = 0,
		.boot_on = 1,
	},
	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
	.consumer_supplies = cam_consumers,
};

static struct mc13xxx_regulator_init_data moboard_regulators[] = {
	{
		.id = MC13783_REG_VMMC1,
		.init_data = &sdhc_vreg_data,
	},
	{
		.id = MC13783_REG_VCAM,
		.init_data = &cam_vreg_data,
	},
};

static struct mc13xxx_led_platform_data moboard_led[] = {
	{
		.id = MC13783_LED_R1,
		.name = "coreboard-led-4:red",
	},
	{
		.id = MC13783_LED_G1,
		.name = "coreboard-led-4:green",
	},
	{
		.id = MC13783_LED_B1,
		.name = "coreboard-led-4:blue",
	},
	{
		.id = MC13783_LED_R2,
		.name = "coreboard-led-5:red",
	},
	{
		.id = MC13783_LED_G2,
		.name = "coreboard-led-5:green",
	},
	{
		.id = MC13783_LED_B2,
		.name = "coreboard-led-5:blue",
	},
};

static struct mc13xxx_leds_platform_data moboard_leds = {
	.num_leds = ARRAY_SIZE(moboard_led),
	.led = moboard_led,
	.led_control[0]	= MC13783_LED_C0_ENABLE | MC13783_LED_C0_ABMODE(0),
	.led_control[1]	= MC13783_LED_C1_SLEWLIM,
	.led_control[2]	= MC13783_LED_C2_SLEWLIM,
	.led_control[3]	= MC13783_LED_C3_PERIOD(0) |
			  MC13783_LED_C3_CURRENT_R1(2) |
			  MC13783_LED_C3_CURRENT_G1(2) |
			  MC13783_LED_C3_CURRENT_B1(2),
	.led_control[4]	= MC13783_LED_C4_PERIOD(0) |
			  MC13783_LED_C4_CURRENT_R2(3) |
			  MC13783_LED_C4_CURRENT_G2(3) |
			  MC13783_LED_C4_CURRENT_B2(3),
};

static struct mc13xxx_buttons_platform_data moboard_buttons = {
	.b1on_flags = MC13783_BUTTON_DBNC_750MS | MC13783_BUTTON_ENABLE |
			MC13783_BUTTON_POL_INVERT,
	.b1on_key = KEY_POWER,
};

static struct mc13xxx_codec_platform_data moboard_codec = {
	.dac_ssi_port = MC13783_SSI1_PORT,
	.adc_ssi_port = MC13783_SSI1_PORT,
};

static struct mc13xxx_platform_data moboard_pmic = {
	.regulators = {
		.regulators = moboard_regulators,
		.num_regulators = ARRAY_SIZE(moboard_regulators),
	},
	.leds = &moboard_leds,
	.buttons = &moboard_buttons,
	.codec = &moboard_codec,
	.flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC | MC13XXX_USE_CODEC,
};

static struct imx_ssi_platform_data moboard_ssi_pdata = {
	.flags = IMX_SSI_DMA | IMX_SSI_NET,
};

static struct spi_board_info moboard_spi_board_info[] __initdata = {
	{
		.modalias = "mc13783",
		/* irq number is run-time assigned */
		.max_speed_hz = 300000,
		.bus_num = 1,
		.chip_select = 0,
		.platform_data = &moboard_pmic,
		.mode = SPI_CS_HIGH,
	},
};

#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)

static int moboard_sdhc1_get_ro(struct device *dev)
{
	return !gpio_get_value(SDHC1_WP);
}

static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
		void *data)
{
	int ret;

	ret = gpio_request(SDHC1_CD, "sdhc-detect");
	if (ret)
		return ret;

	gpio_direction_input(SDHC1_CD);

	ret = gpio_request(SDHC1_WP, "sdhc-wp");
	if (ret)
		goto err_gpio_free;
	gpio_direction_input(SDHC1_WP);

	ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
		"sdhc1-card-detect", data);
	if (ret)
		goto err_gpio_free_2;

	return 0;

err_gpio_free_2:
	gpio_free(SDHC1_WP);
err_gpio_free:
	gpio_free(SDHC1_CD);

	return ret;
}

static void moboard_sdhc1_exit(struct device *dev, void *data)
{
	free_irq(gpio_to_irq(SDHC1_CD), data);
	gpio_free(SDHC1_WP);
	gpio_free(SDHC1_CD);
}

static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
	.get_ro	= moboard_sdhc1_get_ro,
	.init	= moboard_sdhc1_init,
	.exit	= moboard_sdhc1_exit,
};

/*
 * this pin is dedicated for all mx31moboard systems, so we do it here
 */
#define USB_RESET_B	IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
		      PAD_CTL_ODE_CMOS)

#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)

static void usb_xcvr_reset(void)
{
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU);

	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD);

	gpio_request(OTG_EN_B, "usb-udc-en");
	gpio_direction_output(OTG_EN_B, 0);
	gpio_request(USBH2_EN_B, "usbh2-en");
	gpio_direction_output(USBH2_EN_B, 0);

	gpio_request(USB_RESET_B, "usb-reset");
	gpio_direction_output(USB_RESET_B, 0);
	mdelay(1);
	gpio_set_value(USB_RESET_B, 1);
	mdelay(1);
}

static int moboard_usbh2_init_hw(struct platform_device *pdev)
{
	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}

static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
	.init	= moboard_usbh2_init_hw,
	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
};

static int __init moboard_usbh2_init(void)
{
	struct platform_device *pdev;

	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
			ULPI_OTG_DRVVBUS_EXT);
	if (!usbh2_pdata.otg)
		return -ENODEV;

	pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);

	return PTR_ERR_OR_ZERO(pdev);
}

static const struct gpio_led mx31moboard_leds[] __initconst = {
	{
		.name	= "coreboard-led-0:red:running",
		.default_trigger = "heartbeat",
		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SVEN0),
	}, {
		.name	= "coreboard-led-1:red",
		.gpio	= IOMUX_TO_GPIO(MX31_PIN_STX0),
	}, {
		.name	= "coreboard-led-2:red",
		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SRX0),
	}, {
		.name	= "coreboard-led-3:red",
		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
	},
};

static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = {
	.num_leds	= ARRAY_SIZE(mx31moboard_leds),
	.leds		= mx31moboard_leds,
};

static struct platform_device *devices[] __initdata = {
	&mx31moboard_flash,
};

static struct mx3_camera_pdata camera_pdata __initdata = {
	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
	.mclk_10khz	= 4800,
};

static phys_addr_t mx3_camera_base __initdata;
#define MX3_CAMERA_BUF_SIZE SZ_4M

static int __init mx31moboard_init_cam(void)
{
	int ret;
	struct platform_device *pdev;

	imx31_add_ipu_core();

	pdev = imx31_alloc_mx3_camera(&camera_pdata);
	if (IS_ERR(pdev))
		return PTR_ERR(pdev);

	ret = dma_declare_coherent_memory(&pdev->dev,
					  mx3_camera_base, mx3_camera_base,
					  MX3_CAMERA_BUF_SIZE);
	if (ret)
		goto err;

	ret = platform_device_add(pdev);
	if (ret)
err:
		platform_device_put(pdev);

	return ret;

}

static void mx31moboard_poweroff(void)
{
	struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);

	if (!IS_ERR(clk))
		clk_prepare_enable(clk);

	mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);

	imx_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
}

static int mx31moboard_baseboard;
core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);

/*
 * Board specific initialization.
 */
static void __init mx31moboard_init(void)
{
	imx31_soc_init();

	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
		"moboard");

	platform_add_devices(devices, ARRAY_SIZE(devices));

	imx31_add_imx2_wdt();

	imx31_add_imx_uart0(&uart0_pdata);
	imx31_add_imx_uart4(&uart4_pdata);

	imx31_add_imx_i2c0(&moboard_i2c0_data);
	imx31_add_imx_i2c1(&moboard_i2c1_data);

	imx31_add_spi_imx1(NULL);
	imx31_add_spi_imx2(NULL);

	mx31moboard_init_cam();

	imx31_add_imx_ssi(0, &moboard_ssi_pdata);

	pm_power_off = mx31moboard_poweroff;
}

static void __init mx31moboard_late(void)
{
	gpio_led_register_device(-1, &mx31moboard_led_pdata);

	moboard_uart0_init();

	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
	moboard_spi_board_info[0].irq =
			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
	spi_register_board_info(moboard_spi_board_info,
		ARRAY_SIZE(moboard_spi_board_info));

	imx31_add_mxc_mmc(0, &sdhc1_pdata);

	usb_xcvr_reset();
	moboard_usbh2_init();

	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);

	switch (mx31moboard_baseboard) {
	case MX31NOBOARD:
		break;
	case MX31DEVBOARD:
		mx31moboard_devboard_init();
		break;
	case MX31MARXBOT:
		mx31moboard_marxbot_init();
		break;
	case MX31SMARTBOT:
	case MX31EYEBOT:
		mx31moboard_smartbot_init(mx31moboard_baseboard);
		break;
	default:
		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
			mx31moboard_baseboard);
	}
}

static void __init mx31moboard_timer_init(void)
{
	mx31_clocks_init(26000000);
}

static void __init mx31moboard_reserve(void)
{
	/* reserve 4 MiB for mx3-camera */
	mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
			MX3_CAMERA_BUF_SIZE);
}

MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
	/* Maintainer: Philippe Retornaz, EPFL Mobots group */
	.atag_offset = 0x100,
	.reserve = mx31moboard_reserve,
	.map_io = mx31_map_io,
	.init_early = imx31_init_early,
	.init_irq = mx31_init_irq,
	.init_time	= mx31moboard_timer_init,
	.init_machine = mx31moboard_init,
	.init_late	= mx31moboard_late,
	.restart	= mxc_restart,
MACHINE_END