Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Stanislav Samsonov | 662 | 55.35% | 1 | 3.45% |
Andrew Lunn | 217 | 18.14% | 12 | 41.38% |
Lennert Buytenhek | 203 | 16.97% | 4 | 13.79% |
Thomas Petazzoni | 42 | 3.51% | 2 | 6.90% |
Russell King | 33 | 2.76% | 1 | 3.45% |
Riku Voipio | 14 | 1.17% | 1 | 3.45% |
Arnd Bergmann | 13 | 1.09% | 2 | 6.90% |
Stephen Boyd | 4 | 0.33% | 2 | 6.90% |
Arnaud Patard | 3 | 0.25% | 1 | 3.45% |
Nico Pitre | 2 | 0.17% | 1 | 3.45% |
Robin Holt | 2 | 0.17% | 1 | 3.45% |
Fabian Frederick | 1 | 0.08% | 1 | 3.45% |
Total | 1196 | 29 |
/* * arch/arm/mach-mv78xx0/common.c * * Core functions for Marvell MV78xx0 SoCs * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> #include <linux/ata_platform.h> #include <linux/clk-provider.h> #include <linux/ethtool.h> #include <asm/hardware/cache-feroceon-l2.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <linux/platform_data/usb-ehci-orion.h> #include <linux/platform_data/mtd-orion_nand.h> #include <plat/time.h> #include <plat/common.h> #include <plat/addr-map.h> #include "mv78xx0.h" #include "bridge-regs.h" #include "common.h" static int get_tclk(void); /***************************************************************************** * Common bits ****************************************************************************/ int mv78xx0_core_index(void) { u32 extra; /* * Read Extra Features register. */ __asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (extra)); return !!(extra & 0x00004000); } static int get_hclk(void) { int hclk; /* * HCLK tick rate is configured by DEV_D[7:5] pins. */ switch ((readl(SAMPLE_AT_RESET_LOW) >> 5) & 7) { case 0: hclk = 166666667; break; case 1: hclk = 200000000; break; case 2: hclk = 266666667; break; case 3: hclk = 333333333; break; case 4: hclk = 400000000; break; default: panic("unknown HCLK PLL setting: %.8x\n", readl(SAMPLE_AT_RESET_LOW)); } return hclk; } static void get_pclk_l2clk(int hclk, int core_index, int *pclk, int *l2clk) { u32 cfg; /* * Core #0 PCLK/L2CLK is configured by bits [13:8], core #1 * PCLK/L2CLK by bits [19:14]. */ if (core_index == 0) { cfg = (readl(SAMPLE_AT_RESET_LOW) >> 8) & 0x3f; } else { cfg = (readl(SAMPLE_AT_RESET_LOW) >> 14) & 0x3f; } /* * Bits [11:8] ([17:14] for core #1) configure the PCLK:HCLK * ratio (1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6). */ *pclk = ((u64)hclk * (2 + (cfg & 0xf))) >> 1; /* * Bits [13:12] ([19:18] for core #1) configure the PCLK:L2CLK * ratio (1, 2, 3). */ *l2clk = *pclk / (((cfg >> 4) & 3) + 1); } static int get_tclk(void) { int tclk_freq; /* * TCLK tick rate is configured by DEV_A[2:0] strap pins. */ switch ((readl(SAMPLE_AT_RESET_HIGH) >> 6) & 7) { case 1: tclk_freq = 166666667; break; case 3: tclk_freq = 200000000; break; default: panic("unknown TCLK PLL setting: %.8x\n", readl(SAMPLE_AT_RESET_HIGH)); } return tclk_freq; } /***************************************************************************** * I/O Address Mapping ****************************************************************************/ static struct map_desc mv78xx0_io_desc[] __initdata = { { .virtual = (unsigned long) MV78XX0_CORE_REGS_VIRT_BASE, .pfn = 0, .length = MV78XX0_CORE_REGS_SIZE, .type = MT_DEVICE, }, { .virtual = (unsigned long) MV78XX0_REGS_VIRT_BASE, .pfn = __phys_to_pfn(MV78XX0_REGS_PHYS_BASE), .length = MV78XX0_REGS_SIZE, .type = MT_DEVICE, }, }; void __init mv78xx0_map_io(void) { unsigned long phys; /* * Map the right set of per-core registers depending on * which core we are running on. */ if (mv78xx0_core_index() == 0) { phys = MV78XX0_CORE0_REGS_PHYS_BASE; } else { phys = MV78XX0_CORE1_REGS_PHYS_BASE; } mv78xx0_io_desc[0].pfn = __phys_to_pfn(phys); iotable_init(mv78xx0_io_desc, ARRAY_SIZE(mv78xx0_io_desc)); } /***************************************************************************** * CLK tree ****************************************************************************/ static struct clk *tclk; static void __init clk_init(void) { tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, get_tclk()); orion_clkdev_init(tclk); } /***************************************************************************** * EHCI ****************************************************************************/ void __init mv78xx0_ehci0_init(void) { orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA); } /***************************************************************************** * EHCI1 ****************************************************************************/ void __init mv78xx0_ehci1_init(void) { orion_ehci_1_init(USB1_PHYS_BASE, IRQ_MV78XX0_USB_1); } /***************************************************************************** * EHCI2 ****************************************************************************/ void __init mv78xx0_ehci2_init(void) { orion_ehci_2_init(USB2_PHYS_BASE, IRQ_MV78XX0_USB_2); } /***************************************************************************** * GE00 ****************************************************************************/ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, IRQ_MV78XX0_GE_ERR, MV643XX_TX_CSUM_DEFAULT_LIMIT); } /***************************************************************************** * GE01 ****************************************************************************/ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, MV643XX_TX_CSUM_DEFAULT_LIMIT); } /***************************************************************************** * GE10 ****************************************************************************/ void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) { u32 dev, rev; /* * On the Z0, ge10 and ge11 are internally connected back * to back, and not brought out. */ mv78xx0_pcie_id(&dev, &rev); if (dev == MV78X00_Z0_DEV_ID) { eth_data->phy_addr = MV643XX_ETH_PHY_NONE; eth_data->speed = SPEED_1000; eth_data->duplex = DUPLEX_FULL; } orion_ge10_init(eth_data, GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM); } /***************************************************************************** * GE11 ****************************************************************************/ void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) { u32 dev, rev; /* * On the Z0, ge10 and ge11 are internally connected back * to back, and not brought out. */ mv78xx0_pcie_id(&dev, &rev); if (dev == MV78X00_Z0_DEV_ID) { eth_data->phy_addr = MV643XX_ETH_PHY_NONE; eth_data->speed = SPEED_1000; eth_data->duplex = DUPLEX_FULL; } orion_ge11_init(eth_data, GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM); } /***************************************************************************** * I2C ****************************************************************************/ void __init mv78xx0_i2c_init(void) { orion_i2c_init(I2C_0_PHYS_BASE, IRQ_MV78XX0_I2C_0, 8); orion_i2c_1_init(I2C_1_PHYS_BASE, IRQ_MV78XX0_I2C_1, 8); } /***************************************************************************** * SATA ****************************************************************************/ void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data) { orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_MV78XX0_SATA); } /***************************************************************************** * UART0 ****************************************************************************/ void __init mv78xx0_uart0_init(void) { orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, IRQ_MV78XX0_UART_0, tclk); } /***************************************************************************** * UART1 ****************************************************************************/ void __init mv78xx0_uart1_init(void) { orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, IRQ_MV78XX0_UART_1, tclk); } /***************************************************************************** * UART2 ****************************************************************************/ void __init mv78xx0_uart2_init(void) { orion_uart2_init(UART2_VIRT_BASE, UART2_PHYS_BASE, IRQ_MV78XX0_UART_2, tclk); } /***************************************************************************** * UART3 ****************************************************************************/ void __init mv78xx0_uart3_init(void) { orion_uart3_init(UART3_VIRT_BASE, UART3_PHYS_BASE, IRQ_MV78XX0_UART_3, tclk); } /***************************************************************************** * Time handling ****************************************************************************/ void __init mv78xx0_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); if (mv78xx0_core_index() == 0) mvebu_mbus_init("marvell,mv78xx0-mbus", BRIDGE_WINS_CPU0_BASE, BRIDGE_WINS_SZ, DDR_WINDOW_CPU0_BASE, DDR_WINDOW_CPU_SZ); else mvebu_mbus_init("marvell,mv78xx0-mbus", BRIDGE_WINS_CPU1_BASE, BRIDGE_WINS_SZ, DDR_WINDOW_CPU1_BASE, DDR_WINDOW_CPU_SZ); } void __ref mv78xx0_timer_init(void) { orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, IRQ_MV78XX0_TIMER_1, get_tclk()); } /***************************************************************************** * General ****************************************************************************/ static char * __init mv78xx0_id(void) { u32 dev, rev; mv78xx0_pcie_id(&dev, &rev); if (dev == MV78X00_Z0_DEV_ID) { if (rev == MV78X00_REV_Z0) return "MV78X00-Z0"; else return "MV78X00-Rev-Unsupported"; } else if (dev == MV78100_DEV_ID) { if (rev == MV78100_REV_A0) return "MV78100-A0"; else if (rev == MV78100_REV_A1) return "MV78100-A1"; else return "MV78100-Rev-Unsupported"; } else if (dev == MV78200_DEV_ID) { if (rev == MV78100_REV_A0) return "MV78200-A0"; else return "MV78200-Rev-Unsupported"; } else { return "Device-Unknown"; } } static int __init is_l2_writethrough(void) { return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH); } void __init mv78xx0_init(void) { int core_index; int hclk; int pclk; int l2clk; core_index = mv78xx0_core_index(); hclk = get_hclk(); get_pclk_l2clk(hclk, core_index, &pclk, &l2clk); printk(KERN_INFO "%s ", mv78xx0_id()); printk("core #%d, ", core_index); printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000); printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000); printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000); printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000); if (IS_ENABLED(CONFIG_CACHE_FEROCEON_L2)) feroceon_l2_init(is_l2_writethrough()); /* Setup root of clk tree */ clk_init(); } void mv78xx0_restart(enum reboot_mode mode, const char *cmd) { /* * Enable soft reset to assert RSTOUTn. */ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); /* * Assert soft reset. */ writel(SOFT_RESET, SYSTEM_SOFT_RESET); while (1) ; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1