Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Shawn Guo | 790 | 47.48% | 13 | 34.21% |
Fabio Estevam | 413 | 24.82% | 3 | 7.89% |
Dong Aisheng | 116 | 6.97% | 2 | 5.26% |
Lothar Waßmann | 88 | 5.29% | 1 | 2.63% |
Maxime Ripard | 58 | 3.49% | 3 | 7.89% |
Michael Heimpold | 57 | 3.43% | 2 | 5.26% |
Marek Vašut | 51 | 3.06% | 4 | 10.53% |
Gwenhael Goavec-Merou | 51 | 3.06% | 1 | 2.63% |
Eric Bénard | 25 | 1.50% | 1 | 2.63% |
Robin Holt | 5 | 0.30% | 1 | 2.63% |
Brian Lilly | 3 | 0.18% | 2 | 5.26% |
Thomas Gleixner | 2 | 0.12% | 1 | 2.63% |
Nico Pitre | 2 | 0.12% | 1 | 2.63% |
Kefeng Wang | 1 | 0.06% | 1 | 2.63% |
Alexandre Belloni | 1 | 0.06% | 1 | 2.63% |
Nathan Fontenot | 1 | 0.06% | 1 | 2.63% |
Total | 1664 | 38 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2012 Linaro Ltd. */ #include <linux/clk.h> #include <linux/clk/mxs.h> #include <linux/clkdev.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/gpio.h> #include <linux/init.h> #include <linux/irqchip/mxs.h> #include <linux/reboot.h> #include <linux/micrel_phy.h> #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/phy.h> #include <linux/pinctrl/consumer.h> #include <linux/sys_soc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/system_misc.h> #include "pm.h" /* MXS DIGCTL SAIF CLKMUX */ #define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0 #define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1 #define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2 #define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3 #define HW_DIGCTL_CHIPID 0x310 #define HW_DIGCTL_CHIPID_MASK (0xffff << 16) #define HW_DIGCTL_REV_MASK 0xff #define HW_DIGCTL_CHIPID_MX23 (0x3780 << 16) #define HW_DIGCTL_CHIPID_MX28 (0x2800 << 16) #define MXS_CHIP_REVISION_1_0 0x10 #define MXS_CHIP_REVISION_1_1 0x11 #define MXS_CHIP_REVISION_1_2 0x12 #define MXS_CHIP_REVISION_1_3 0x13 #define MXS_CHIP_REVISION_1_4 0x14 #define MXS_CHIP_REV_UNKNOWN 0xff #define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) #define MXS_SET_ADDR 0x4 #define MXS_CLR_ADDR 0x8 #define MXS_TOG_ADDR 0xc static u32 chipid; static u32 socid; static void __iomem *reset_addr; static inline void __mxs_setl(u32 mask, void __iomem *reg) { __raw_writel(mask, reg + MXS_SET_ADDR); } static inline void __mxs_clrl(u32 mask, void __iomem *reg) { __raw_writel(mask, reg + MXS_CLR_ADDR); } static inline void __mxs_togl(u32 mask, void __iomem *reg) { __raw_writel(mask, reg + MXS_TOG_ADDR); } #define OCOTP_WORD_OFFSET 0x20 #define OCOTP_WORD_COUNT 0x20 #define BM_OCOTP_CTRL_BUSY (1 << 8) #define BM_OCOTP_CTRL_ERROR (1 << 9) #define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) static DEFINE_MUTEX(ocotp_mutex); static u32 ocotp_words[OCOTP_WORD_COUNT]; static const u32 *mxs_get_ocotp(void) { struct device_node *np; void __iomem *ocotp_base; int timeout = 0x400; size_t i; static int once; if (once) return ocotp_words; np = of_find_compatible_node(NULL, NULL, "fsl,ocotp"); ocotp_base = of_iomap(np, 0); WARN_ON(!ocotp_base); mutex_lock(&ocotp_mutex); /* * clk_enable(hbus_clk) for ocotp can be skipped * as it must be on when system is running. */ /* try to clear ERROR bit */ __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); /* check both BUSY and ERROR cleared */ while ((__raw_readl(ocotp_base) & (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) cpu_relax(); if (unlikely(!timeout)) goto error_unlock; /* open OCOTP banks for read */ __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); /* approximately wait 32 hclk cycles */ udelay(1); /* poll BUSY bit becoming cleared */ timeout = 0x400; while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) cpu_relax(); if (unlikely(!timeout)) goto error_unlock; for (i = 0; i < OCOTP_WORD_COUNT; i++) ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + i * 0x10); /* close banks for power saving */ __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); once = 1; mutex_unlock(&ocotp_mutex); return ocotp_words; error_unlock: mutex_unlock(&ocotp_mutex); pr_err("%s: timeout in reading OCOTP\n", __func__); return NULL; } enum mac_oui { OUI_FSL, OUI_DENX, OUI_CRYSTALFONTZ, OUI_I2SE, OUI_ARMADEUS, }; static void __init update_fec_mac_prop(enum mac_oui oui) { struct device_node *np, *from = NULL; struct property *newmac; const u32 *ocotp = mxs_get_ocotp(); u8 *macaddr; u32 val; int i; for (i = 0; i < 2; i++) { np = of_find_compatible_node(from, NULL, "fsl,imx28-fec"); if (!np) return; from = np; if (of_get_property(np, "local-mac-address", NULL)) continue; newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL); if (!newmac) return; newmac->value = newmac + 1; newmac->length = 6; newmac->name = kstrdup("local-mac-address", GFP_KERNEL); if (!newmac->name) { kfree(newmac); return; } /* * OCOTP only stores the last 4 octets for each mac address, * so hard-code OUI here. */ macaddr = newmac->value; switch (oui) { case OUI_FSL: macaddr[0] = 0x00; macaddr[1] = 0x04; macaddr[2] = 0x9f; break; case OUI_DENX: macaddr[0] = 0xc0; macaddr[1] = 0xe5; macaddr[2] = 0x4e; break; case OUI_CRYSTALFONTZ: macaddr[0] = 0x58; macaddr[1] = 0xb9; macaddr[2] = 0xe1; break; case OUI_I2SE: macaddr[0] = 0x00; macaddr[1] = 0x01; macaddr[2] = 0x87; break; case OUI_ARMADEUS: macaddr[0] = 0x00; macaddr[1] = 0x1e; macaddr[2] = 0xac; break; } val = ocotp[i]; macaddr[3] = (val >> 16) & 0xff; macaddr[4] = (val >> 8) & 0xff; macaddr[5] = (val >> 0) & 0xff; of_update_property(np, newmac); } } static inline void enable_clk_enet_out(void) { struct clk *clk = clk_get_sys("enet_out", NULL); if (!IS_ERR(clk)) clk_prepare_enable(clk); } static void __init imx28_evk_init(void) { update_fec_mac_prop(OUI_FSL); mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); } static void __init imx28_apf28_init(void) { update_fec_mac_prop(OUI_ARMADEUS); } static int apx4devkit_phy_fixup(struct phy_device *phy) { phy->dev_flags |= MICREL_PHY_50MHZ_CLK; return 0; } static void __init apx4devkit_init(void) { enable_clk_enet_out(); if (IS_BUILTIN(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ8051, MICREL_PHY_ID_MASK, apx4devkit_phy_fixup); } static void __init crystalfontz_init(void) { update_fec_mac_prop(OUI_CRYSTALFONTZ); } static void __init duckbill_init(void) { update_fec_mac_prop(OUI_I2SE); } static void __init m28cu3_init(void) { update_fec_mac_prop(OUI_DENX); } static const char __init *mxs_get_soc_id(void) { struct device_node *np; void __iomem *digctl_base; np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl"); digctl_base = of_iomap(np, 0); WARN_ON(!digctl_base); chipid = readl(digctl_base + HW_DIGCTL_CHIPID); socid = chipid & HW_DIGCTL_CHIPID_MASK; iounmap(digctl_base); of_node_put(np); switch (socid) { case HW_DIGCTL_CHIPID_MX23: return "i.MX23"; case HW_DIGCTL_CHIPID_MX28: return "i.MX28"; default: return "Unknown"; } } static u32 __init mxs_get_cpu_rev(void) { u32 rev = chipid & HW_DIGCTL_REV_MASK; switch (socid) { case HW_DIGCTL_CHIPID_MX23: switch (rev) { case 0x0: return MXS_CHIP_REVISION_1_0; case 0x1: return MXS_CHIP_REVISION_1_1; case 0x2: return MXS_CHIP_REVISION_1_2; case 0x3: return MXS_CHIP_REVISION_1_3; case 0x4: return MXS_CHIP_REVISION_1_4; default: return MXS_CHIP_REV_UNKNOWN; } case HW_DIGCTL_CHIPID_MX28: switch (rev) { case 0x0: return MXS_CHIP_REVISION_1_1; case 0x1: return MXS_CHIP_REVISION_1_2; default: return MXS_CHIP_REV_UNKNOWN; } default: return MXS_CHIP_REV_UNKNOWN; } } static const char __init *mxs_get_revision(void) { u32 rev = mxs_get_cpu_rev(); if (rev != MXS_CHIP_REV_UNKNOWN) return kasprintf(GFP_KERNEL, "%d.%d", (rev >> 4) & 0xf, rev & 0xf); else return kasprintf(GFP_KERNEL, "%s", "Unknown"); } #define MX23_CLKCTRL_RESET_OFFSET 0x120 #define MX28_CLKCTRL_RESET_OFFSET 0x1e0 static int __init mxs_restart_init(void) { struct device_node *np; np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl"); reset_addr = of_iomap(np, 0); if (!reset_addr) return -ENODEV; if (of_device_is_compatible(np, "fsl,imx23-clkctrl")) reset_addr += MX23_CLKCTRL_RESET_OFFSET; else reset_addr += MX28_CLKCTRL_RESET_OFFSET; of_node_put(np); return 0; } static void __init eukrea_mbmx283lc_init(void) { mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); } static void __init mxs_machine_init(void) { struct device_node *root; struct device *parent; struct soc_device *soc_dev; struct soc_device_attribute *soc_dev_attr; int ret; soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); if (!soc_dev_attr) return; root = of_find_node_by_path("/"); ret = of_property_read_string(root, "model", &soc_dev_attr->machine); if (ret) return; soc_dev_attr->family = "Freescale MXS Family"; soc_dev_attr->soc_id = mxs_get_soc_id(); soc_dev_attr->revision = mxs_get_revision(); soc_dev = soc_device_register(soc_dev_attr); if (IS_ERR(soc_dev)) { kfree(soc_dev_attr->revision); kfree(soc_dev_attr); return; } parent = soc_device_to_device(soc_dev); if (of_machine_is_compatible("fsl,imx28-evk")) imx28_evk_init(); if (of_machine_is_compatible("armadeus,imx28-apf28")) imx28_apf28_init(); else if (of_machine_is_compatible("bluegiga,apx4devkit")) apx4devkit_init(); else if (of_machine_is_compatible("crystalfontz,cfa10036")) crystalfontz_init(); else if (of_machine_is_compatible("eukrea,mbmx283lc")) eukrea_mbmx283lc_init(); else if (of_machine_is_compatible("i2se,duckbill") || of_machine_is_compatible("i2se,duckbill-2")) duckbill_init(); else if (of_machine_is_compatible("msr,m28cu3")) m28cu3_init(); of_platform_default_populate(NULL, NULL, parent); mxs_restart_init(); } #define MXS_CLKCTRL_RESET_CHIP (1 << 1) /* * Reset the system. It is called by machine_restart(). */ static void mxs_restart(enum reboot_mode mode, const char *cmd) { if (reset_addr) { /* reset the chip */ __mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr); pr_err("Failed to assert the chip reset\n"); /* Delay to allow the serial port to show the message */ mdelay(50); } /* We'll take a jump through zero as a poor second */ soft_restart(0); } static const char *const mxs_dt_compat[] __initconst = { "fsl,imx28", "fsl,imx23", NULL, }; DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)") .handle_irq = icoll_handle_irq, .init_machine = mxs_machine_init, .init_late = mxs_pm_init, .dt_compat = mxs_dt_compat, .restart = mxs_restart, MACHINE_END
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1