| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Eric Miao | 2770 | 80.29% | 2 | 6.45% |
| Ian Molton | 318 | 9.22% | 6 | 19.35% |
| Linus Walleij | 99 | 2.87% | 1 | 3.23% |
| Axel Lin | 63 | 1.83% | 3 | 9.68% |
| Dmitry Eremin-Solenikov | 54 | 1.57% | 1 | 3.23% |
| Russell King | 38 | 1.10% | 4 | 12.90% |
| Haojian Zhuang | 34 | 0.99% | 2 | 6.45% |
| Laura Abbott | 15 | 0.43% | 1 | 3.23% |
| Robert Jarzmik | 15 | 0.43% | 2 | 6.45% |
| Nico Pitre | 12 | 0.35% | 1 | 3.23% |
| Stephen Warren | 12 | 0.35% | 1 | 3.23% |
| Marek Vašut | 11 | 0.32% | 2 | 6.45% |
| Arnd Bergmann | 7 | 0.20% | 3 | 9.68% |
| Stephen Boyd | 1 | 0.03% | 1 | 3.23% |
| Boris Brezillon | 1 | 0.03% | 1 | 3.23% |
| Total | 3450 | 31 |
/* * Hardware definitions for the Toshiba eseries PDAs * * Copyright (c) 2003 Ian Molton <spyro@f2s.com> * * This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. * */ #include <linux/clkdev.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/clk-provider.h> #include <linux/gpio/machine.h> #include <linux/gpio.h> #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/mfd/tc6387xb.h> #include <linux/mfd/tc6393xb.h> #include <linux/mfd/t7l66xb.h> #include <linux/mtd/rawnand.h> #include <linux/mtd/partitions.h> #include <linux/memblock.h> #include <video/w100fb.h> #include <asm/setup.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include "pxa25x.h" #include <mach/eseries-gpio.h> #include "eseries-irq.h" #include <mach/audio.h> #include <linux/platform_data/video-pxafb.h> #include "udc.h" #include <linux/platform_data/irda-pxaficp.h> #include "devices.h" #include "generic.h" /* Only e800 has 128MB RAM */ void __init eseries_fixup(struct tag *tags, char **cmdline) { if (machine_is_e800()) memblock_add(0xa0000000, SZ_128M); else memblock_add(0xa0000000, SZ_64M); } static struct gpiod_lookup_table e7xx_gpio_vbus_gpiod_table __maybe_unused = { .dev_id = "gpio-vbus", .table = { GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_DISC, "vbus", GPIO_ACTIVE_HIGH), GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_PULLUP, "pullup", GPIO_ACTIVE_LOW), { }, }, }; static struct platform_device e7xx_gpio_vbus __maybe_unused = { .name = "gpio-vbus", .id = -1, }; struct pxaficp_platform_data e7xx_ficp_platform_data = { .gpio_pwdown = GPIO_E7XX_IR_OFF, .transceiver_cap = IR_SIRMODE | IR_OFF, }; int eseries_tmio_enable(struct platform_device *dev) { /* Reset - bring SUSPEND high before PCLR */ gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0); gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0); msleep(1); gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1); msleep(1); gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1); msleep(1); return 0; } int eseries_tmio_disable(struct platform_device *dev) { gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0); gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0); return 0; } int eseries_tmio_suspend(struct platform_device *dev) { gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0); return 0; } int eseries_tmio_resume(struct platform_device *dev) { gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1); msleep(1); return 0; } void eseries_get_tmio_gpios(void) { gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL); gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL); gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0); gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0); } /* TMIO controller uses the same resources on all e-series machines. */ struct resource eseries_tmio_resources[] = { [0] = { .start = PXA_CS4_PHYS, .end = PXA_CS4_PHYS + 0x1fffff, .flags = IORESOURCE_MEM, }, [1] = { .start = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ), .end = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ), .flags = IORESOURCE_IRQ, }, }; /* Some e-series hardware cannot control the 32K clock */ static void __init __maybe_unused eseries_register_clks(void) { clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, 0, 32768); } #ifdef CONFIG_MACH_E330 /* -------------------- e330 tc6387xb parameters -------------------- */ static struct tc6387xb_platform_data e330_tc6387xb_info = { .enable = &eseries_tmio_enable, .disable = &eseries_tmio_disable, .suspend = &eseries_tmio_suspend, .resume = &eseries_tmio_resume, }; static struct platform_device e330_tc6387xb_device = { .name = "tc6387xb", .id = -1, .dev = { .platform_data = &e330_tc6387xb_info, }, .num_resources = 2, .resource = eseries_tmio_resources, }; /* --------------------------------------------------------------- */ static struct platform_device *e330_devices[] __initdata = { &e330_tc6387xb_device, &e7xx_gpio_vbus, }; static void __init e330_init(void) { pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); eseries_register_clks(); eseries_get_tmio_gpios(); gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(e330_devices)); } MACHINE_START(E330, "Toshiba e330") /* Maintainer: Ian Molton (spyro@f2s.com) */ .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e330_init, .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif #ifdef CONFIG_MACH_E350 /* -------------------- e350 t7l66xb parameters -------------------- */ static struct t7l66xb_platform_data e350_t7l66xb_info = { .irq_base = IRQ_BOARD_START, .enable = &eseries_tmio_enable, .suspend = &eseries_tmio_suspend, .resume = &eseries_tmio_resume, }; static struct platform_device e350_t7l66xb_device = { .name = "t7l66xb", .id = -1, .dev = { .platform_data = &e350_t7l66xb_info, }, .num_resources = 2, .resource = eseries_tmio_resources, }; /* ---------------------------------------------------------- */ static struct platform_device *e350_devices[] __initdata = { &e350_t7l66xb_device, &e7xx_gpio_vbus, }; static void __init e350_init(void) { pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); eseries_register_clks(); eseries_get_tmio_gpios(); gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(e350_devices)); } MACHINE_START(E350, "Toshiba e350") /* Maintainer: Ian Molton (spyro@f2s.com) */ .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e350_init, .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif #ifdef CONFIG_MACH_E400 /* ------------------------ E400 LCD definitions ------------------------ */ static struct pxafb_mode_info e400_pxafb_mode_info = { .pixclock = 140703, .xres = 240, .yres = 320, .bpp = 16, .hsync_len = 4, .left_margin = 28, .right_margin = 8, .vsync_len = 3, .upper_margin = 5, .lower_margin = 6, .sync = 0, }; static struct pxafb_mach_info e400_pxafb_mach_info = { .modes = &e400_pxafb_mode_info, .num_modes = 1, .lcd_conn = LCD_COLOR_TFT_16BPP, .lccr3 = 0, .pxafb_backlight_power = NULL, }; /* ------------------------ E400 MFP config ----------------------------- */ static unsigned long e400_pin_config[] __initdata = { /* Chip selects */ GPIO15_nCS_1, /* CS1 - Flash */ GPIO80_nCS_4, /* CS4 - TMIO */ /* Clocks */ GPIO12_32KHz, /* BTUART */ GPIO42_BTUART_RXD, GPIO43_BTUART_TXD, GPIO44_BTUART_CTS, /* TMIO controller */ GPIO19_GPIO, /* t7l66xb #PCLR */ GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */ /* wakeup */ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, }; /* ---------------------------------------------------------------------- */ static struct mtd_partition partition_a = { .name = "Internal NAND flash", .offset = 0, .size = MTDPART_SIZ_FULL, }; static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; static struct nand_bbt_descr e400_t7l66xb_nand_bbt = { .options = 0, .offs = 4, .len = 2, .pattern = scan_ff_pattern }; static struct tmio_nand_data e400_t7l66xb_nand_config = { .num_partitions = 1, .partition = &partition_a, .badblock_pattern = &e400_t7l66xb_nand_bbt, }; static struct t7l66xb_platform_data e400_t7l66xb_info = { .irq_base = IRQ_BOARD_START, .enable = &eseries_tmio_enable, .suspend = &eseries_tmio_suspend, .resume = &eseries_tmio_resume, .nand_data = &e400_t7l66xb_nand_config, }; static struct platform_device e400_t7l66xb_device = { .name = "t7l66xb", .id = -1, .dev = { .platform_data = &e400_t7l66xb_info, }, .num_resources = 2, .resource = eseries_tmio_resources, }; /* ---------------------------------------------------------- */ static struct platform_device *e400_devices[] __initdata = { &e400_t7l66xb_device, &e7xx_gpio_vbus, }; static void __init e400_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config)); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); /* Fixme - e400 may have a switched clock */ eseries_register_clks(); eseries_get_tmio_gpios(); pxa_set_fb_info(NULL, &e400_pxafb_mach_info); gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(e400_devices)); } MACHINE_START(E400, "Toshiba e400") /* Maintainer: Ian Molton (spyro@f2s.com) */ .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e400_init, .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif #ifdef CONFIG_MACH_E740 /* ------------------------ e740 video support --------------------------- */ static struct w100_gen_regs e740_lcd_regs = { .lcd_format = 0x00008023, .lcdd_cntl1 = 0x0f000000, .lcdd_cntl2 = 0x0003ffff, .genlcd_cntl1 = 0x00ffff03, .genlcd_cntl2 = 0x003c0f03, .genlcd_cntl3 = 0x000143aa, }; static struct w100_mode e740_lcd_mode = { .xres = 240, .yres = 320, .left_margin = 20, .right_margin = 28, .upper_margin = 9, .lower_margin = 8, .crtc_ss = 0x80140013, .crtc_ls = 0x81150110, .crtc_gs = 0x80050005, .crtc_vpos_gs = 0x000a0009, .crtc_rev = 0x0040010a, .crtc_dclk = 0xa906000a, .crtc_gclk = 0x80050108, .crtc_goe = 0x80050108, .pll_freq = 57, .pixclk_divider = 4, .pixclk_divider_rotated = 4, .pixclk_src = CLK_SRC_XTAL, .sysclk_divider = 1, .sysclk_src = CLK_SRC_PLL, .crtc_ps1_active = 0x41060010, }; static struct w100_gpio_regs e740_w100_gpio_info = { .init_data1 = 0x21002103, .gpio_dir1 = 0xffffdeff, .gpio_oe1 = 0x03c00643, .init_data2 = 0x003f003f, .gpio_dir2 = 0xffffffff, .gpio_oe2 = 0x000000ff, }; static struct w100fb_mach_info e740_fb_info = { .modelist = &e740_lcd_mode, .num_modes = 1, .regs = &e740_lcd_regs, .gpio = &e740_w100_gpio_info, .xtal_freq = 14318000, .xtal_dbl = 1, }; static struct resource e740_fb_resources[] = { [0] = { .start = 0x0c000000, .end = 0x0cffffff, .flags = IORESOURCE_MEM, }, }; static struct platform_device e740_fb_device = { .name = "w100fb", .id = -1, .dev = { .platform_data = &e740_fb_info, }, .num_resources = ARRAY_SIZE(e740_fb_resources), .resource = e740_fb_resources, }; /* --------------------------- MFP Pin config -------------------------- */ static unsigned long e740_pin_config[] __initdata = { /* Chip selects */ GPIO15_nCS_1, /* CS1 - Flash */ GPIO79_nCS_3, /* CS3 - IMAGEON */ GPIO80_nCS_4, /* CS4 - TMIO */ /* Clocks */ GPIO12_32KHz, /* BTUART */ GPIO42_BTUART_RXD, GPIO43_BTUART_TXD, GPIO44_BTUART_CTS, /* TMIO controller */ GPIO19_GPIO, /* t7l66xb #PCLR */ GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */ /* UDC */ GPIO13_GPIO, GPIO3_GPIO, /* IrDA */ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, /* AC97 */ GPIO28_AC97_BITCLK, GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, /* Audio power control */ GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */ GPIO40_GPIO, /* Mic amp power */ GPIO41_GPIO, /* Headphone amp power */ /* PC Card */ GPIO8_GPIO, /* CD0 */ GPIO44_GPIO, /* CD1 */ GPIO11_GPIO, /* IRQ0 */ GPIO6_GPIO, /* IRQ1 */ GPIO27_GPIO, /* RST0 */ GPIO24_GPIO, /* RST1 */ GPIO20_GPIO, /* PWR0 */ GPIO23_GPIO, /* PWR1 */ GPIO48_nPOE, GPIO49_nPWE, GPIO50_nPIOR, GPIO51_nPIOW, GPIO52_nPCE_1, GPIO53_nPCE_2, GPIO54_nPSKTSEL, GPIO55_nPREG, GPIO56_nPWAIT, GPIO57_nIOIS16, /* wakeup */ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, }; /* -------------------- e740 t7l66xb parameters -------------------- */ static struct t7l66xb_platform_data e740_t7l66xb_info = { .irq_base = IRQ_BOARD_START, .enable = &eseries_tmio_enable, .suspend = &eseries_tmio_suspend, .resume = &eseries_tmio_resume, }; static struct platform_device e740_t7l66xb_device = { .name = "t7l66xb", .id = -1, .dev = { .platform_data = &e740_t7l66xb_info, }, .num_resources = 2, .resource = eseries_tmio_resources, }; static struct platform_device e740_audio_device = { .name = "e740-audio", .id = -1, }; /* ----------------------------------------------------------------------- */ static struct platform_device *e740_devices[] __initdata = { &e740_fb_device, &e740_t7l66xb_device, &e7xx_gpio_vbus, &e740_audio_device, }; static void __init e740_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config)); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); eseries_register_clks(); clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name, "UDCCLK", &pxa25x_device_udc.dev), eseries_get_tmio_gpios(); gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(e740_devices)); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&e7xx_ficp_platform_data); } MACHINE_START(E740, "Toshiba e740") /* Maintainer: Ian Molton (spyro@f2s.com) */ .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e740_init, .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif #ifdef CONFIG_MACH_E750 /* ---------------------- E750 LCD definitions -------------------- */ static struct w100_gen_regs e750_lcd_regs = { .lcd_format = 0x00008003, .lcdd_cntl1 = 0x00000000, .lcdd_cntl2 = 0x0003ffff, .genlcd_cntl1 = 0x00fff003, .genlcd_cntl2 = 0x003c0f03, .genlcd_cntl3 = 0x000143aa, }; static struct w100_mode e750_lcd_mode = { .xres = 240, .yres = 320, .left_margin = 21, .right_margin = 22, .upper_margin = 5, .lower_margin = 4, .crtc_ss = 0x80150014, .crtc_ls = 0x8014000d, .crtc_gs = 0xc1000005, .crtc_vpos_gs = 0x00020147, .crtc_rev = 0x0040010a, .crtc_dclk = 0xa1700030, .crtc_gclk = 0x80cc0015, .crtc_goe = 0x80cc0015, .crtc_ps1_active = 0x61060017, .pll_freq = 57, .pixclk_divider = 4, .pixclk_divider_rotated = 4, .pixclk_src = CLK_SRC_XTAL, .sysclk_divider = 1, .sysclk_src = CLK_SRC_PLL, }; static struct w100_gpio_regs e750_w100_gpio_info = { .init_data1 = 0x01192f1b, .gpio_dir1 = 0xd5ffdeff, .gpio_oe1 = 0x000020bf, .init_data2 = 0x010f010f, .gpio_dir2 = 0xffffffff, .gpio_oe2 = 0x000001cf, }; static struct w100fb_mach_info e750_fb_info = { .modelist = &e750_lcd_mode, .num_modes = 1, .regs = &e750_lcd_regs, .gpio = &e750_w100_gpio_info, .xtal_freq = 14318000, .xtal_dbl = 1, }; static struct resource e750_fb_resources[] = { [0] = { .start = 0x0c000000, .end = 0x0cffffff, .flags = IORESOURCE_MEM, }, }; static struct platform_device e750_fb_device = { .name = "w100fb", .id = -1, .dev = { .platform_data = &e750_fb_info, }, .num_resources = ARRAY_SIZE(e750_fb_resources), .resource = e750_fb_resources, }; /* -------------------- e750 MFP parameters -------------------- */ static unsigned long e750_pin_config[] __initdata = { /* Chip selects */ GPIO15_nCS_1, /* CS1 - Flash */ GPIO79_nCS_3, /* CS3 - IMAGEON */ GPIO80_nCS_4, /* CS4 - TMIO */ /* Clocks */ GPIO11_3_6MHz, /* BTUART */ GPIO42_BTUART_RXD, GPIO43_BTUART_TXD, GPIO44_BTUART_CTS, /* TMIO controller */ GPIO19_GPIO, /* t7l66xb #PCLR */ GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */ /* UDC */ GPIO13_GPIO, GPIO3_GPIO, /* IrDA */ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, /* AC97 */ GPIO28_AC97_BITCLK, GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, /* Audio power control */ GPIO4_GPIO, /* Headphone amp power */ GPIO7_GPIO, /* Speaker amp power */ GPIO37_GPIO, /* Headphone detect */ /* PC Card */ GPIO8_GPIO, /* CD0 */ GPIO44_GPIO, /* CD1 */ /* GPIO11_GPIO, IRQ0 */ GPIO6_GPIO, /* IRQ1 */ GPIO27_GPIO, /* RST0 */ GPIO24_GPIO, /* RST1 */ GPIO20_GPIO, /* PWR0 */ GPIO23_GPIO, /* PWR1 */ GPIO48_nPOE, GPIO49_nPWE, GPIO50_nPIOR, GPIO51_nPIOW, GPIO52_nPCE_1, GPIO53_nPCE_2, GPIO54_nPSKTSEL, GPIO55_nPREG, GPIO56_nPWAIT, GPIO57_nIOIS16, /* wakeup */ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, }; /* ----------------- e750 tc6393xb parameters ------------------ */ static struct tc6393xb_platform_data e750_tc6393xb_info = { .irq_base = IRQ_BOARD_START, .scr_pll2cr = 0x0cc1, .scr_gper = 0, .gpio_base = -1, .suspend = &eseries_tmio_suspend, .resume = &eseries_tmio_resume, .enable = &eseries_tmio_enable, .disable = &eseries_tmio_disable, }; static struct platform_device e750_tc6393xb_device = { .name = "tc6393xb", .id = -1, .dev = { .platform_data = &e750_tc6393xb_info, }, .num_resources = 2, .resource = eseries_tmio_resources, }; static struct platform_device e750_audio_device = { .name = "e750-audio", .id = -1, }; /* ------------------------------------------------------------- */ static struct platform_device *e750_devices[] __initdata = { &e750_fb_device, &e750_tc6393xb_device, &e7xx_gpio_vbus, &e750_audio_device, }; static void __init e750_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config)); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name, "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(e750_devices)); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&e7xx_ficp_platform_data); } MACHINE_START(E750, "Toshiba e750") /* Maintainer: Ian Molton (spyro@f2s.com) */ .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e750_init, .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif #ifdef CONFIG_MACH_E800 /* ------------------------ e800 LCD definitions ------------------------- */ static unsigned long e800_pin_config[] __initdata = { /* AC97 */ GPIO28_AC97_BITCLK, GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, /* tc6393xb */ GPIO11_3_6MHz, }; static struct w100_gen_regs e800_lcd_regs = { .lcd_format = 0x00008003, .lcdd_cntl1 = 0x02a00000, .lcdd_cntl2 = 0x0003ffff, .genlcd_cntl1 = 0x000ff2a3, .genlcd_cntl2 = 0x000002a3, .genlcd_cntl3 = 0x000102aa, }; static struct w100_mode e800_lcd_mode[2] = { [0] = { .xres = 480, .yres = 640, .left_margin = 52, .right_margin = 148, .upper_margin = 2, .lower_margin = 6, .crtc_ss = 0x80350034, .crtc_ls = 0x802b0026, .crtc_gs = 0x80160016, .crtc_vpos_gs = 0x00020003, .crtc_rev = 0x0040001d, .crtc_dclk = 0xe0000000, .crtc_gclk = 0x82a50049, .crtc_goe = 0x80ee001c, .crtc_ps1_active = 0x00000000, .pll_freq = 128, .pixclk_divider = 4, .pixclk_divider_rotated = 6, .pixclk_src = CLK_SRC_PLL, .sysclk_divider = 0, .sysclk_src = CLK_SRC_PLL, }, [1] = { .xres = 240, .yres = 320, .left_margin = 15, .right_margin = 88, .upper_margin = 0, .lower_margin = 7, .crtc_ss = 0xd010000f, .crtc_ls = 0x80070003, .crtc_gs = 0x80000000, .crtc_vpos_gs = 0x01460147, .crtc_rev = 0x00400003, .crtc_dclk = 0xa1700030, .crtc_gclk = 0x814b0008, .crtc_goe = 0x80cc0015, .crtc_ps1_active = 0x00000000, .pll_freq = 100, .pixclk_divider = 6, /* Wince uses 14 which gives a */ .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */ .pixclk_src = CLK_SRC_PLL, .sysclk_divider = 0, .sysclk_src = CLK_SRC_PLL, } }; static struct w100_gpio_regs e800_w100_gpio_info = { .init_data1 = 0xc13fc019, .gpio_dir1 = 0x3e40df7f, .gpio_oe1 = 0x003c3000, .init_data2 = 0x00000000, .gpio_dir2 = 0x00000000, .gpio_oe2 = 0x00000000, }; static struct w100_mem_info e800_w100_mem_info = { .ext_cntl = 0x09640011, .sdram_mode_reg = 0x00600021, .ext_timing_cntl = 0x10001545, .io_cntl = 0x7ddd7333, .size = 0x1fffff, }; static void e800_tg_change(struct w100fb_par *par) { unsigned long tmp; tmp = w100fb_gpio_read(W100_GPIO_PORT_A); if (par->mode->xres == 480) tmp |= 0x100; else tmp &= ~0x100; w100fb_gpio_write(W100_GPIO_PORT_A, tmp); } static struct w100_tg_info e800_tg_info = { .change = e800_tg_change, }; static struct w100fb_mach_info e800_fb_info = { .modelist = e800_lcd_mode, .num_modes = 2, .regs = &e800_lcd_regs, .gpio = &e800_w100_gpio_info, .mem = &e800_w100_mem_info, .tg = &e800_tg_info, .xtal_freq = 16000000, }; static struct resource e800_fb_resources[] = { [0] = { .start = 0x0c000000, .end = 0x0cffffff, .flags = IORESOURCE_MEM, }, }; static struct platform_device e800_fb_device = { .name = "w100fb", .id = -1, .dev = { .platform_data = &e800_fb_info, }, .num_resources = ARRAY_SIZE(e800_fb_resources), .resource = e800_fb_resources, }; /* --------------------------- UDC definitions --------------------------- */ static struct gpiod_lookup_table e800_gpio_vbus_gpiod_table = { .dev_id = "gpio-vbus", .table = { GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_DISC, "vbus", GPIO_ACTIVE_HIGH), GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_PULLUP, "pullup", GPIO_ACTIVE_LOW), { }, }, }; static struct platform_device e800_gpio_vbus = { .name = "gpio-vbus", .id = -1, }; /* ----------------- e800 tc6393xb parameters ------------------ */ static struct tc6393xb_platform_data e800_tc6393xb_info = { .irq_base = IRQ_BOARD_START, .scr_pll2cr = 0x0cc1, .scr_gper = 0, .gpio_base = -1, .suspend = &eseries_tmio_suspend, .resume = &eseries_tmio_resume, .enable = &eseries_tmio_enable, .disable = &eseries_tmio_disable, }; static struct platform_device e800_tc6393xb_device = { .name = "tc6393xb", .id = -1, .dev = { .platform_data = &e800_tc6393xb_info, }, .num_resources = 2, .resource = eseries_tmio_resources, }; static struct platform_device e800_audio_device = { .name = "e800-audio", .id = -1, }; /* ----------------------------------------------------------------------- */ static struct platform_device *e800_devices[] __initdata = { &e800_fb_device, &e800_tc6393xb_device, &e800_gpio_vbus, &e800_audio_device, }; static void __init e800_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config)); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name, "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); gpiod_add_lookup_table(&e800_gpio_vbus_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(e800_devices)); pxa_set_ac97_info(NULL); } MACHINE_START(E800, "Toshiba e800") /* Maintainer: Ian Molton (spyro@f2s.com) */ .atag_offset = 0x100, .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e800_init, .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1