| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Russell King | 674 | 92.08% | 2 | 25.00% |
| Robert Jarzmik | 32 | 4.37% | 1 | 12.50% |
| Eric Miao | 20 | 2.73% | 3 | 37.50% |
| Arnd Bergmann | 4 | 0.55% | 1 | 12.50% |
| Thomas Gleixner | 2 | 0.27% | 1 | 12.50% |
| Total | 732 | 8 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * arch/arm/mach-pxa/include/mach/pxa2xx-regs.h * * Taken from pxa-regs.h by Russell King * * Author: Nicolas Pitre * Copyright: MontaVista Software Inc. */ #ifndef __PXA2XX_REGS_H #define __PXA2XX_REGS_H #include <mach/hardware.h> /* * Power Manager */ #define PMCR __REG(0x40F00000) /* Power Manager Control Register */ #define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ #define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ #define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */ #define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */ #define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */ #define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */ #define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */ #define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */ #define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */ #define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ #define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */ #define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ #define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ #define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */ #define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */ #define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */ #define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ #define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ #define PCMD(x) __REG2(0x40F00080, (x)<<2) #define PCMD0 __REG(0x40F00080 + 0 * 4) #define PCMD1 __REG(0x40F00080 + 1 * 4) #define PCMD2 __REG(0x40F00080 + 2 * 4) #define PCMD3 __REG(0x40F00080 + 3 * 4) #define PCMD4 __REG(0x40F00080 + 4 * 4) #define PCMD5 __REG(0x40F00080 + 5 * 4) #define PCMD6 __REG(0x40F00080 + 6 * 4) #define PCMD7 __REG(0x40F00080 + 7 * 4) #define PCMD8 __REG(0x40F00080 + 8 * 4) #define PCMD9 __REG(0x40F00080 + 9 * 4) #define PCMD10 __REG(0x40F00080 + 10 * 4) #define PCMD11 __REG(0x40F00080 + 11 * 4) #define PCMD12 __REG(0x40F00080 + 12 * 4) #define PCMD13 __REG(0x40F00080 + 13 * 4) #define PCMD14 __REG(0x40F00080 + 14 * 4) #define PCMD15 __REG(0x40F00080 + 15 * 4) #define PCMD16 __REG(0x40F00080 + 16 * 4) #define PCMD17 __REG(0x40F00080 + 17 * 4) #define PCMD18 __REG(0x40F00080 + 18 * 4) #define PCMD19 __REG(0x40F00080 + 19 * 4) #define PCMD20 __REG(0x40F00080 + 20 * 4) #define PCMD21 __REG(0x40F00080 + 21 * 4) #define PCMD22 __REG(0x40F00080 + 22 * 4) #define PCMD23 __REG(0x40F00080 + 23 * 4) #define PCMD24 __REG(0x40F00080 + 24 * 4) #define PCMD25 __REG(0x40F00080 + 25 * 4) #define PCMD26 __REG(0x40F00080 + 26 * 4) #define PCMD27 __REG(0x40F00080 + 27 * 4) #define PCMD28 __REG(0x40F00080 + 28 * 4) #define PCMD29 __REG(0x40F00080 + 29 * 4) #define PCMD30 __REG(0x40F00080 + 30 * 4) #define PCMD31 __REG(0x40F00080 + 31 * 4) #define PCMD_MBC (1<<12) #define PCMD_DCE (1<<11) #define PCMD_LC (1<<10) /* FIXME: PCMD_SQC need be checked. */ #define PCMD_SQC (3<<8) /* currently only bit 8 is changeable, bit 9 should be 0 all day. */ #define PVCR_VCSA (0x1<<14) #define PVCR_CommandDelay (0xf80) #define PCFR_PI2C_EN (0x1 << 6) #define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */ #define PSSR_RDH (1 << 5) /* Read Disable Hold */ #define PSSR_PH (1 << 4) /* Peripheral Control Hold */ #define PSSR_STS (1 << 3) /* Standby Mode Status */ #define PSSR_VFS (1 << 2) /* VDD Fault Status */ #define PSSR_BFS (1 << 1) /* Battery Fault Status */ #define PSSR_SSS (1 << 0) /* Software Sleep Status */ #define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */ #define PCFR_RO (1 << 15) /* RDH Override */ #define PCFR_PO (1 << 14) /* PH Override */ #define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */ #define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */ #define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */ #define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */ #define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */ #define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */ #define PCFR_DS (1 << 3) /* Deep Sleep Mode */ #define PCFR_FS (1 << 2) /* Float Static Chip Selects */ #define PCFR_FP (1 << 1) /* Float PCMCIA controls */ #define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */ #define RCSR_GPR (1 << 3) /* GPIO Reset */ #define RCSR_SMR (1 << 2) /* Sleep Mode */ #define RCSR_WDR (1 << 1) /* Watchdog Reset */ #define RCSR_HWR (1 << 0) /* Hardware Reset */ #define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */ #define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */ #define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */ #define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */ #define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */ #define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */ #define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */ #define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */ #define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */ #define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */ #define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */ #define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */ #define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */ #define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */ #define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */ #define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */ #define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */ #define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */ /* * PXA2xx specific Core clock definitions */ #define CCCR io_p2v(0x41300000) /* Core Clock Configuration Register */ #define CCSR io_p2v(0x4130000C) /* Core Clock Status Register */ #define CKEN io_p2v(0x41300004) /* Clock Enable Register */ #define OSCC io_p2v(0x41300008) /* Oscillator Configuration Register */ #define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ #define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ #define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ #define CCCR_CPDIS_BIT (31) #define CCCR_PPDIS_BIT (30) #define CCCR_LCD_26_BIT (27) #define CCCR_A_BIT (25) #define CCSR_N2_MASK CCCR_N_MASK #define CCSR_M_MASK CCCR_M_MASK #define CCSR_L_MASK CCCR_L_MASK #define CCSR_N2_SHIFT 7 #define CKEN_AC97CONF (31) /* AC97 Controller Configuration */ #define CKEN_CAMERA (24) /* Camera Interface Clock Enable */ #define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */ #define CKEN_MEMC (22) /* Memory Controller Clock Enable */ #define CKEN_MEMSTK (21) /* Memory Stick Host Controller */ #define CKEN_IM (20) /* Internal Memory Clock Enable */ #define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */ #define CKEN_USIM (18) /* USIM Unit Clock Enable */ #define CKEN_MSL (17) /* MSL Unit Clock Enable */ #define CKEN_LCD (16) /* LCD Unit Clock Enable */ #define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */ #define CKEN_I2C (14) /* I2C Unit Clock Enable */ #define CKEN_FICP (13) /* FICP Unit Clock Enable */ #define CKEN_MMC (12) /* MMC Unit Clock Enable */ #define CKEN_USB (11) /* USB Unit Clock Enable */ #define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */ #define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */ #define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */ #define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */ #define CKEN_I2S (8) /* I2S Unit Clock Enable */ #define CKEN_BTUART (7) /* BTUART Unit Clock Enable */ #define CKEN_FFUART (6) /* FFUART Unit Clock Enable */ #define CKEN_STUART (5) /* STUART Unit Clock Enable */ #define CKEN_HWUART (4) /* HWUART Unit Clock Enable */ #define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */ #define CKEN_SSP (3) /* SSP Unit Clock Enable */ #define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */ #define CKEN_AC97 (2) /* AC97 Unit Clock Enable */ #define CKEN_PWM1 (1) /* PWM1 Clock Enable */ #define CKEN_PWM0 (0) /* PWM0 Clock Enable */ #define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ #define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ /* PWRMODE register M field values */ #define PWRMODE_IDLE 0x1 #define PWRMODE_STANDBY 0x2 #define PWRMODE_SLEEP 0x3 #define PWRMODE_DEEPSLEEP 0x7 #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1