Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Lennert Buytenhek | 1502 | 75.74% | 3 | 6.67% |
Eric Miao | 140 | 7.06% | 7 | 15.56% |
Richard Purdie | 120 | 6.05% | 1 | 2.22% |
Russell King | 87 | 4.39% | 9 | 20.00% |
Arnd Bergmann | 36 | 1.82% | 5 | 11.11% |
Thierry Reding | 36 | 1.82% | 1 | 2.22% |
Rafael J. Wysocki | 11 | 0.55% | 1 | 2.22% |
Thomas Gleixner | 9 | 0.45% | 4 | 8.89% |
Haojian Zhuang | 7 | 0.35% | 2 | 4.44% |
Marek Vašut | 7 | 0.35% | 2 | 4.44% |
Rasmus Villemoes | 6 | 0.30% | 1 | 2.22% |
David Brownell | 6 | 0.30% | 1 | 2.22% |
Mark Brown | 5 | 0.25% | 1 | 2.22% |
Rob Herring | 3 | 0.15% | 1 | 2.22% |
Stephen Warren | 2 | 0.10% | 1 | 2.22% |
Dmitry Eremin-Solenikov | 2 | 0.10% | 2 | 4.44% |
Nico Pitre | 2 | 0.10% | 1 | 2.22% |
Masahiro Yamada | 1 | 0.05% | 1 | 2.22% |
Kay Sievers | 1 | 0.05% | 1 | 2.22% |
Total | 1983 | 45 |
// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-pxa/lpd270.c * * Support for the LogicPD PXA270 Card Engine. * Derived from the mainstone code, which carries these notices: * * Author: Nicolas Pitre * Created: Nov 05, 2002 * Copyright: MontaVista Software Inc. */ #include <linux/gpio.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/syscore_ops.h> #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/bitops.h> #include <linux/fb.h> #include <linux/ioport.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/irq.h> #include <linux/sizes.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/flash.h> #include "pxa27x.h" #include "lpd270.h" #include <mach/audio.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <mach/smemc.h> #include "generic.h" #include "devices.h" static unsigned long lpd270_pin_config[] __initdata = { /* Chip Selects */ GPIO15_nCS_1, /* Mainboard Flash */ GPIO78_nCS_2, /* CPLD + Ethernet */ /* LCD - 16bpp Active TFT */ GPIO58_LCD_LDD_0, GPIO59_LCD_LDD_1, GPIO60_LCD_LDD_2, GPIO61_LCD_LDD_3, GPIO62_LCD_LDD_4, GPIO63_LCD_LDD_5, GPIO64_LCD_LDD_6, GPIO65_LCD_LDD_7, GPIO66_LCD_LDD_8, GPIO67_LCD_LDD_9, GPIO68_LCD_LDD_10, GPIO69_LCD_LDD_11, GPIO70_LCD_LDD_12, GPIO71_LCD_LDD_13, GPIO72_LCD_LDD_14, GPIO73_LCD_LDD_15, GPIO74_LCD_FCLK, GPIO75_LCD_LCLK, GPIO76_LCD_PCLK, GPIO77_LCD_BIAS, GPIO16_PWM0_OUT, /* Backlight */ /* USB Host */ GPIO88_USBH1_PWR, GPIO89_USBH1_PEN, /* AC97 */ GPIO28_AC97_BITCLK, GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, GPIO45_AC97_SYSCLK, GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, }; static unsigned int lpd270_irq_enabled; static void lpd270_mask_irq(struct irq_data *d) { int lpd270_irq = d->irq - LPD270_IRQ(0); __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS); lpd270_irq_enabled &= ~(1 << lpd270_irq); __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); } static void lpd270_unmask_irq(struct irq_data *d) { int lpd270_irq = d->irq - LPD270_IRQ(0); lpd270_irq_enabled |= 1 << lpd270_irq; __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); } static struct irq_chip lpd270_irq_chip = { .name = "CPLD", .irq_ack = lpd270_mask_irq, .irq_mask = lpd270_mask_irq, .irq_unmask = lpd270_unmask_irq, }; static void lpd270_irq_handler(struct irq_desc *desc) { unsigned int irq; unsigned long pending; pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled; do { /* clear useless edge notification */ desc->irq_data.chip->irq_ack(&desc->irq_data); if (likely(pending)) { irq = LPD270_IRQ(0) + __ffs(pending); generic_handle_irq(irq); pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled; } } while (pending); } static void __init lpd270_init_irq(void) { int irq; pxa27x_init_irq(); __raw_writew(0, LPD270_INT_MASK); __raw_writew(0, LPD270_INT_STATUS); /* setup extra LogicPD PXA270 irqs */ for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) { irq_set_chip_and_handler(irq, &lpd270_irq_chip, handle_level_irq); irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); } irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler); irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM static void lpd270_irq_resume(void) { __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); } static struct syscore_ops lpd270_irq_syscore_ops = { .resume = lpd270_irq_resume, }; static int __init lpd270_irq_device_init(void) { if (machine_is_logicpd_pxa270()) { register_syscore_ops(&lpd270_irq_syscore_ops); return 0; } return -ENODEV; } device_initcall(lpd270_irq_device_init); #endif static struct resource smc91x_resources[] = { [0] = { .start = LPD270_ETH_PHYS, .end = (LPD270_ETH_PHYS + 0xfffff), .flags = IORESOURCE_MEM, }, [1] = { .start = LPD270_ETHERNET_IRQ, .end = LPD270_ETHERNET_IRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; struct smc91x_platdata smc91x_platdata = { .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, }; static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, .dev.platform_data = &smc91x_platdata, }; static struct resource lpd270_flash_resources[] = { [0] = { .start = PXA_CS0_PHYS, .end = PXA_CS0_PHYS + SZ_64M - 1, .flags = IORESOURCE_MEM, }, [1] = { .start = PXA_CS1_PHYS, .end = PXA_CS1_PHYS + SZ_64M - 1, .flags = IORESOURCE_MEM, }, }; static struct mtd_partition lpd270_flash0_partitions[] = { { .name = "Bootloader", .size = 0x00040000, .offset = 0, .mask_flags = MTD_WRITEABLE /* force read-only */ }, { .name = "Kernel", .size = 0x00400000, .offset = 0x00040000, }, { .name = "Filesystem", .size = MTDPART_SIZ_FULL, .offset = 0x00440000 }, }; static struct flash_platform_data lpd270_flash_data[2] = { { .name = "processor-flash", .map_name = "cfi_probe", .parts = lpd270_flash0_partitions, .nr_parts = ARRAY_SIZE(lpd270_flash0_partitions), }, { .name = "mainboard-flash", .map_name = "cfi_probe", .parts = NULL, .nr_parts = 0, } }; static struct platform_device lpd270_flash_device[2] = { { .name = "pxa2xx-flash", .id = 0, .dev = { .platform_data = &lpd270_flash_data[0], }, .resource = &lpd270_flash_resources[0], .num_resources = 1, }, { .name = "pxa2xx-flash", .id = 1, .dev = { .platform_data = &lpd270_flash_data[1], }, .resource = &lpd270_flash_resources[1], .num_resources = 1, }, }; static struct pwm_lookup lpd270_pwm_lookup[] = { PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770, PWM_POLARITY_NORMAL), }; static struct platform_pwm_backlight_data lpd270_backlight_data = { .max_brightness = 1, .dft_brightness = 1, }; static struct platform_device lpd270_backlight_device = { .name = "pwm-backlight", .dev = { .parent = &pxa27x_device_pwm0.dev, .platform_data = &lpd270_backlight_data, }, }; /* 5.7" TFT QVGA (LoLo display number 1) */ static struct pxafb_mode_info sharp_lq057q3dc02_mode = { .pixclock = 150000, .xres = 320, .yres = 240, .bpp = 16, .hsync_len = 0x14, .left_margin = 0x28, .right_margin = 0x0a, .vsync_len = 0x02, .upper_margin = 0x08, .lower_margin = 0x14, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, }; static struct pxafb_mach_info sharp_lq057q3dc02 = { .modes = &sharp_lq057q3dc02_mode, .num_modes = 1, .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL | LCD_ALTERNATE_MAPPING, }; /* 12.1" TFT SVGA (LoLo display number 2) */ static struct pxafb_mode_info sharp_lq121s1dg31_mode = { .pixclock = 50000, .xres = 800, .yres = 600, .bpp = 16, .hsync_len = 0x05, .left_margin = 0x52, .right_margin = 0x05, .vsync_len = 0x04, .upper_margin = 0x14, .lower_margin = 0x0a, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, }; static struct pxafb_mach_info sharp_lq121s1dg31 = { .modes = &sharp_lq121s1dg31_mode, .num_modes = 1, .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL | LCD_ALTERNATE_MAPPING, }; /* 3.6" TFT QVGA (LoLo display number 3) */ static struct pxafb_mode_info sharp_lq036q1da01_mode = { .pixclock = 150000, .xres = 320, .yres = 240, .bpp = 16, .hsync_len = 0x0e, .left_margin = 0x04, .right_margin = 0x0a, .vsync_len = 0x03, .upper_margin = 0x03, .lower_margin = 0x03, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, }; static struct pxafb_mach_info sharp_lq036q1da01 = { .modes = &sharp_lq036q1da01_mode, .num_modes = 1, .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL | LCD_ALTERNATE_MAPPING, }; /* 6.4" TFT VGA (LoLo display number 5) */ static struct pxafb_mode_info sharp_lq64d343_mode = { .pixclock = 25000, .xres = 640, .yres = 480, .bpp = 16, .hsync_len = 0x31, .left_margin = 0x89, .right_margin = 0x19, .vsync_len = 0x12, .upper_margin = 0x22, .lower_margin = 0x00, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, }; static struct pxafb_mach_info sharp_lq64d343 = { .modes = &sharp_lq64d343_mode, .num_modes = 1, .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL | LCD_ALTERNATE_MAPPING, }; /* 10.4" TFT VGA (LoLo display number 7) */ static struct pxafb_mode_info sharp_lq10d368_mode = { .pixclock = 25000, .xres = 640, .yres = 480, .bpp = 16, .hsync_len = 0x31, .left_margin = 0x89, .right_margin = 0x19, .vsync_len = 0x12, .upper_margin = 0x22, .lower_margin = 0x00, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, }; static struct pxafb_mach_info sharp_lq10d368 = { .modes = &sharp_lq10d368_mode, .num_modes = 1, .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL | LCD_ALTERNATE_MAPPING, }; /* 3.5" TFT QVGA (LoLo display number 8) */ static struct pxafb_mode_info sharp_lq035q7db02_20_mode = { .pixclock = 150000, .xres = 240, .yres = 320, .bpp = 16, .hsync_len = 0x0e, .left_margin = 0x0a, .right_margin = 0x0a, .vsync_len = 0x03, .upper_margin = 0x05, .lower_margin = 0x14, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, }; static struct pxafb_mach_info sharp_lq035q7db02_20 = { .modes = &sharp_lq035q7db02_20_mode, .num_modes = 1, .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL | LCD_ALTERNATE_MAPPING, }; static struct pxafb_mach_info *lpd270_lcd_to_use; static int __init lpd270_set_lcd(char *str) { if (!strncasecmp(str, "lq057q3dc02", 11)) { lpd270_lcd_to_use = &sharp_lq057q3dc02; } else if (!strncasecmp(str, "lq121s1dg31", 11)) { lpd270_lcd_to_use = &sharp_lq121s1dg31; } else if (!strncasecmp(str, "lq036q1da01", 11)) { lpd270_lcd_to_use = &sharp_lq036q1da01; } else if (!strncasecmp(str, "lq64d343", 8)) { lpd270_lcd_to_use = &sharp_lq64d343; } else if (!strncasecmp(str, "lq10d368", 8)) { lpd270_lcd_to_use = &sharp_lq10d368; } else if (!strncasecmp(str, "lq035q7db02-20", 14)) { lpd270_lcd_to_use = &sharp_lq035q7db02_20; } else { printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str); } return 1; } __setup("lcd=", lpd270_set_lcd); static struct platform_device *platform_devices[] __initdata = { &smc91x_device, &lpd270_backlight_device, &lpd270_flash_device[0], &lpd270_flash_device[1], }; static struct pxaohci_platform_data lpd270_ohci_platform_data = { .port_mode = PMM_PERPORT_MODE, .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW, }; static void __init lpd270_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config)); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4; lpd270_flash_data[1].width = 4; /* * System bus arbiter setting: * - Core_Park * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4 */ ARB_CNTRL = ARB_CORE_PARK | 0x234; pwm_add_table(lpd270_pwm_lookup, ARRAY_SIZE(lpd270_pwm_lookup)); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); pxa_set_ac97_info(NULL); if (lpd270_lcd_to_use != NULL) pxa_set_fb_info(NULL, lpd270_lcd_to_use); pxa_set_ohci_info(&lpd270_ohci_platform_data); } static struct map_desc lpd270_io_desc[] __initdata = { { .virtual = (unsigned long)LPD270_CPLD_VIRT, .pfn = __phys_to_pfn(LPD270_CPLD_PHYS), .length = LPD270_CPLD_SIZE, .type = MT_DEVICE, }, }; static void __init lpd270_map_io(void) { pxa27x_map_io(); iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc)); /* for use I SRAM as framebuffer. */ PSLR |= 0x00000F04; PCFR = 0x00000066; } MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine") /* Maintainer: Peter Barada */ .atag_offset = 0x100, .map_io = lpd270_map_io, .nr_irqs = LPD270_NR_IRQS, .init_irq = lpd270_init_irq, .handle_irq = pxa27x_handle_irq, .init_time = pxa_timer_init, .init_machine = lpd270_init, .restart = pxa_restart, MACHINE_END
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1