Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Chris Zhong | 1006 | 89.82% | 4 | 30.77% |
Heiko Stübner | 72 | 6.43% | 3 | 23.08% |
Doug Anderson | 27 | 2.41% | 2 | 15.38% |
Wen Yang | 10 | 0.89% | 1 | 7.69% |
Fabio Estevam | 2 | 0.18% | 1 | 7.69% |
Thomas Gleixner | 2 | 0.18% | 1 | 7.69% |
Florian Fainelli | 1 | 0.09% | 1 | 7.69% |
Total | 1120 | 13 |
// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd * Author: Tony Xie <tony.xie@rock-chips.com> */ #include <linux/init.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/regmap.h> #include <linux/suspend.h> #include <linux/mfd/syscon.h> #include <linux/regulator/machine.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> #include <asm/suspend.h> #include "pm.h" /* These enum are option of low power mode */ enum { ROCKCHIP_ARM_OFF_LOGIC_NORMAL = 0, ROCKCHIP_ARM_OFF_LOGIC_DEEP = 1, }; struct rockchip_pm_data { const struct platform_suspend_ops *ops; int (*init)(struct device_node *np); }; static void __iomem *rk3288_bootram_base; static phys_addr_t rk3288_bootram_phy; static struct regmap *pmu_regmap; static struct regmap *sgrf_regmap; static struct regmap *grf_regmap; static u32 rk3288_pmu_pwr_mode_con; static u32 rk3288_sgrf_soc_con0; static u32 rk3288_sgrf_cpu_con0; static inline u32 rk3288_l2_config(void) { u32 l2ctlr; asm("mrc p15, 1, %0, c9, c0, 2" : "=r" (l2ctlr)); return l2ctlr; } static void __init rk3288_config_bootdata(void) { rkpm_bootdata_cpusp = rk3288_bootram_phy + (SZ_4K - 8); rkpm_bootdata_cpu_code = __pa_symbol(cpu_resume); rkpm_bootdata_l2ctlr_f = 1; rkpm_bootdata_l2ctlr = rk3288_l2_config(); } #define GRF_UOC0_CON0 0x320 #define GRF_UOC1_CON0 0x334 #define GRF_UOC2_CON0 0x348 #define GRF_SIDDQ BIT(13) static bool rk3288_slp_disable_osc(void) { static const u32 reg_offset[] = { GRF_UOC0_CON0, GRF_UOC1_CON0, GRF_UOC2_CON0 }; u32 reg, i; /* * if any usb phy is still on(GRF_SIDDQ==0), that means we need the * function of usb wakeup, so do not switch to 32khz, since the usb phy * clk does not connect to 32khz osc */ for (i = 0; i < ARRAY_SIZE(reg_offset); i++) { regmap_read(grf_regmap, reg_offset[i], ®); if (!(reg & GRF_SIDDQ)) return false; } return true; } static void rk3288_slp_mode_set(int level) { u32 mode_set, mode_set1; bool osc_disable = rk3288_slp_disable_osc(); regmap_read(sgrf_regmap, RK3288_SGRF_CPU_CON0, &rk3288_sgrf_cpu_con0); regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0); regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON, &rk3288_pmu_pwr_mode_con); /* * SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR * PCLK_WDT_GATE - disable WDT during suspend. */ regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0, SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN | SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE); /* * The dapswjdp can not auto reset before resume, that cause it may * access some illegal address during resume. Let's disable it before * suspend, and the MASKROM will enable it back. */ regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, SGRF_DAPDEVICEEN_WRITE); /* booting address of resuming system is from this register value */ regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR, rk3288_bootram_phy); mode_set = BIT(PMU_GLOBAL_INT_DISABLE) | BIT(PMU_L2FLUSH_EN) | BIT(PMU_SREF0_ENTER_EN) | BIT(PMU_SREF1_ENTER_EN) | BIT(PMU_DDR0_GATING_EN) | BIT(PMU_DDR1_GATING_EN) | BIT(PMU_PWR_MODE_EN) | BIT(PMU_CHIP_PD_EN) | BIT(PMU_SCU_EN); mode_set1 = BIT(PMU_CLR_CORE) | BIT(PMU_CLR_CPUP); if (level == ROCKCHIP_ARM_OFF_LOGIC_DEEP) { /* arm off, logic deep sleep */ mode_set |= BIT(PMU_BUS_PD_EN) | BIT(PMU_PMU_USE_LF) | BIT(PMU_DDR1IO_RET_EN) | BIT(PMU_DDR0IO_RET_EN) | BIT(PMU_ALIVE_USE_LF) | BIT(PMU_PLL_PD_EN); if (osc_disable) mode_set |= BIT(PMU_OSC_24M_DIS); mode_set1 |= BIT(PMU_CLR_ALIVE) | BIT(PMU_CLR_BUS) | BIT(PMU_CLR_PERI) | BIT(PMU_CLR_DMA); regmap_write(pmu_regmap, RK3288_PMU_WAKEUP_CFG1, PMU_ARMINT_WAKEUP_EN); /* * In deep suspend we use PMU_PMU_USE_LF to let the rk3288 * switch its main clock supply to the alternative 32kHz * source. Therefore set 30ms on a 32kHz clock for pmic * stabilization. Similar 30ms on 24MHz for the other * mode below. */ regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, 32 * 30); /* only wait for stabilization, if we turned the osc off */ regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, osc_disable ? 32 * 30 : 0); } else { /* * arm off, logic normal * if pmu_clk_core_src_gate_en is not set, * wakeup will be error */ mode_set |= BIT(PMU_CLK_CORE_SRC_GATE_EN); regmap_write(pmu_regmap, RK3288_PMU_WAKEUP_CFG1, PMU_ARMINT_WAKEUP_EN | PMU_GPIOINT_WAKEUP_EN); /* 30ms on a 24MHz clock for pmic stabilization */ regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, 24000 * 30); /* oscillator is still running, so no need to wait */ regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, 0); } regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON, mode_set); regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON1, mode_set1); } static void rk3288_slp_mode_set_resume(void) { regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, rk3288_sgrf_cpu_con0 | SGRF_DAPDEVICEEN_WRITE); regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON, rk3288_pmu_pwr_mode_con); regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0, rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE); } static int rockchip_lpmode_enter(unsigned long arg) { flush_cache_all(); cpu_do_idle(); pr_err("%s: Failed to suspend\n", __func__); return 1; } static int rk3288_suspend_enter(suspend_state_t state) { local_fiq_disable(); rk3288_slp_mode_set(ROCKCHIP_ARM_OFF_LOGIC_NORMAL); cpu_suspend(0, rockchip_lpmode_enter); rk3288_slp_mode_set_resume(); local_fiq_enable(); return 0; } static int rk3288_suspend_prepare(void) { return regulator_suspend_prepare(PM_SUSPEND_MEM); } static void rk3288_suspend_finish(void) { if (regulator_suspend_finish()) pr_err("%s: Suspend finish failed\n", __func__); } static int __init rk3288_suspend_init(struct device_node *np) { struct device_node *sram_np; struct resource res; int ret; pmu_regmap = syscon_node_to_regmap(np); if (IS_ERR(pmu_regmap)) { pr_err("%s: could not find pmu regmap\n", __func__); return PTR_ERR(pmu_regmap); } sgrf_regmap = syscon_regmap_lookup_by_compatible( "rockchip,rk3288-sgrf"); if (IS_ERR(sgrf_regmap)) { pr_err("%s: could not find sgrf regmap\n", __func__); return PTR_ERR(sgrf_regmap); } grf_regmap = syscon_regmap_lookup_by_compatible( "rockchip,rk3288-grf"); if (IS_ERR(grf_regmap)) { pr_err("%s: could not find grf regmap\n", __func__); return PTR_ERR(grf_regmap); } sram_np = of_find_compatible_node(NULL, NULL, "rockchip,rk3288-pmu-sram"); if (!sram_np) { pr_err("%s: could not find bootram dt node\n", __func__); return -ENODEV; } rk3288_bootram_base = of_iomap(sram_np, 0); if (!rk3288_bootram_base) { pr_err("%s: could not map bootram base\n", __func__); of_node_put(sram_np); return -ENOMEM; } ret = of_address_to_resource(sram_np, 0, &res); if (ret) { pr_err("%s: could not get bootram phy addr\n", __func__); of_node_put(sram_np); return ret; } rk3288_bootram_phy = res.start; of_node_put(sram_np); rk3288_config_bootdata(); /* copy resume code and data to bootsram */ memcpy(rk3288_bootram_base, rockchip_slp_cpu_resume, rk3288_bootram_sz); return 0; } static const struct platform_suspend_ops rk3288_suspend_ops = { .enter = rk3288_suspend_enter, .valid = suspend_valid_only_mem, .prepare = rk3288_suspend_prepare, .finish = rk3288_suspend_finish, }; static const struct rockchip_pm_data rk3288_pm_data __initconst = { .ops = &rk3288_suspend_ops, .init = rk3288_suspend_init, }; static const struct of_device_id rockchip_pmu_of_device_ids[] __initconst = { { .compatible = "rockchip,rk3288-pmu", .data = &rk3288_pm_data, }, { /* sentinel */ }, }; void __init rockchip_suspend_init(void) { const struct rockchip_pm_data *pm_data; const struct of_device_id *match; struct device_node *np; int ret; np = of_find_matching_node_and_match(NULL, rockchip_pmu_of_device_ids, &match); if (!match) { pr_err("Failed to find PMU node\n"); return; } pm_data = (struct rockchip_pm_data *) match->data; if (pm_data->init) { ret = pm_data->init(np); if (ret) { pr_err("%s: matches init error %d\n", __func__, ret); return; } } suspend_set_ops(pm_data->ops); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1