Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Joseph Lo | 959 | 79.39% | 12 | 41.38% |
Dmitry Osipenko | 141 | 11.67% | 7 | 24.14% |
Thierry Reding | 95 | 7.86% | 4 | 13.79% |
Jon Hunter | 3 | 0.25% | 1 | 3.45% |
Stephen Warren | 3 | 0.25% | 1 | 3.45% |
Tejun Heo | 2 | 0.17% | 1 | 3.45% |
Prashant Gaikwad | 2 | 0.17% | 1 | 3.45% |
Thomas Gleixner | 2 | 0.17% | 1 | 3.45% |
Will Deacon | 1 | 0.08% | 1 | 3.45% |
Total | 1208 | 29 |
// SPDX-License-Identifier: GPL-2.0-only /* * CPU complex suspend & resume functions for Tegra SoCs * * Copyright (c) 2009-2012, NVIDIA Corporation. All rights reserved. */ #include <linux/clk/tegra.h> #include <linux/cpumask.h> #include <linux/cpu_pm.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/suspend.h> #include <linux/firmware/trusted_foundations.h> #include <soc/tegra/flowctrl.h> #include <soc/tegra/fuse.h> #include <soc/tegra/pm.h> #include <soc/tegra/pmc.h> #include <asm/cacheflush.h> #include <asm/firmware.h> #include <asm/idmap.h> #include <asm/proc-fns.h> #include <asm/smp_plat.h> #include <asm/suspend.h> #include <asm/tlbflush.h> #include "iomap.h" #include "pm.h" #include "reset.h" #include "sleep.h" #ifdef CONFIG_PM_SLEEP static DEFINE_SPINLOCK(tegra_lp2_lock); static u32 iram_save_size; static void *iram_save_addr; struct tegra_lp1_iram tegra_lp1_iram; void (*tegra_tear_down_cpu)(void); void (*tegra_sleep_core_finish)(unsigned long v2p); static int (*tegra_sleep_func)(unsigned long v2p); static void tegra_tear_down_cpu_init(void) { switch (tegra_get_chip_id()) { case TEGRA20: if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) tegra_tear_down_cpu = tegra20_tear_down_cpu; break; case TEGRA30: case TEGRA114: case TEGRA124: if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) || IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) || IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC)) tegra_tear_down_cpu = tegra30_tear_down_cpu; break; } } /* * restore_cpu_complex * * restores cpu clock setting, clears flow controller * * Always called on CPU 0. */ static void restore_cpu_complex(void) { int cpu = smp_processor_id(); BUG_ON(cpu != 0); #ifdef CONFIG_SMP cpu = cpu_logical_map(cpu); #endif /* Restore the CPU clock settings */ tegra_cpu_clock_resume(); flowctrl_cpu_suspend_exit(cpu); } /* * suspend_cpu_complex * * saves pll state for use by restart_plls, prepares flow controller for * transition to suspend state * * Must always be called on cpu 0. */ static void suspend_cpu_complex(void) { int cpu = smp_processor_id(); BUG_ON(cpu != 0); #ifdef CONFIG_SMP cpu = cpu_logical_map(cpu); #endif /* Save the CPU clock settings */ tegra_cpu_clock_suspend(); flowctrl_cpu_suspend_enter(cpu); } void tegra_pm_clear_cpu_in_lp2(void) { int phy_cpu_id = cpu_logical_map(smp_processor_id()); u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; spin_lock(&tegra_lp2_lock); BUG_ON(!(*cpu_in_lp2 & BIT(phy_cpu_id))); *cpu_in_lp2 &= ~BIT(phy_cpu_id); spin_unlock(&tegra_lp2_lock); } void tegra_pm_set_cpu_in_lp2(void) { int phy_cpu_id = cpu_logical_map(smp_processor_id()); u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; spin_lock(&tegra_lp2_lock); BUG_ON((*cpu_in_lp2 & BIT(phy_cpu_id))); *cpu_in_lp2 |= BIT(phy_cpu_id); spin_unlock(&tegra_lp2_lock); } static int tegra_sleep_cpu(unsigned long v2p) { if (tegra_cpu_car_ops->rail_off_ready && WARN_ON(!tegra_cpu_rail_off_ready())) return -EBUSY; /* * L2 cache disabling using kernel API only allowed when all * secondary CPU's are offline. Cache have to be disabled with * MMU-on if cache maintenance is done via Trusted Foundations * firmware. Note that CPUIDLE won't ever enter powergate on Tegra30 * if any of secondary CPU's is online and this is the LP2-idle * code-path only for Tegra20/30. */ #ifdef CONFIG_OUTER_CACHE if (trusted_foundations_registered() && outer_cache.disable) outer_cache.disable(); #endif /* * Note that besides of setting up CPU reset vector this firmware * call may also do the following, depending on the FW version: * 1) Disable L2. But this doesn't matter since we already * disabled the L2. * 2) Disable D-cache. This need to be taken into account in * particular by the tegra_disable_clean_inv_dcache() which * shall avoid the re-disable. */ call_firmware_op(prepare_idle, TF_PM_MODE_LP2); setup_mm_for_reboot(); tegra_sleep_cpu_finish(v2p); /* should never here */ BUG(); return 0; } static void tegra_pm_set(enum tegra_suspend_mode mode) { u32 value; switch (tegra_get_chip_id()) { case TEGRA20: case TEGRA30: break; default: /* Turn off CRAIL */ value = flowctrl_read_cpu_csr(0); value &= ~FLOW_CTRL_CSR_ENABLE_EXT_MASK; value |= FLOW_CTRL_CSR_ENABLE_EXT_CRAIL; flowctrl_write_cpu_csr(0, value); break; } tegra_pmc_enter_suspend_mode(mode); } int tegra_pm_enter_lp2(void) { int err; tegra_pm_set(TEGRA_SUSPEND_LP2); cpu_cluster_pm_enter(); suspend_cpu_complex(); err = cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); /* * Resume L2 cache if it wasn't re-enabled early during resume, * which is the case for Tegra30 that has to re-enable the cache * via firmware call. In other cases cache is already enabled and * hence re-enabling is a no-op. This is always a no-op on Tegra114+. */ outer_resume(); restore_cpu_complex(); cpu_cluster_pm_exit(); call_firmware_op(prepare_idle, TF_PM_MODE_NONE); return err; } enum tegra_suspend_mode tegra_pm_validate_suspend_mode( enum tegra_suspend_mode mode) { /* * The Tegra devices support suspending to LP1 or lower currently. */ if (mode > TEGRA_SUSPEND_LP1) return TEGRA_SUSPEND_LP1; return mode; } static int tegra_sleep_core(unsigned long v2p) { /* * Cache have to be disabled with MMU-on if cache maintenance is done * via Trusted Foundations firmware. This is a no-op on Tegra114+. */ if (trusted_foundations_registered()) outer_disable(); call_firmware_op(prepare_idle, TF_PM_MODE_LP1); setup_mm_for_reboot(); tegra_sleep_core_finish(v2p); /* should never here */ BUG(); return 0; } /* * tegra_lp1_iram_hook * * Hooking the address of LP1 reset vector and SDRAM self-refresh code in * SDRAM. These codes not be copied to IRAM in this fuction. We need to * copy these code to IRAM before LP0/LP1 suspend and restore the content * of IRAM after resume. */ static bool tegra_lp1_iram_hook(void) { switch (tegra_get_chip_id()) { case TEGRA20: if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) tegra20_lp1_iram_hook(); break; case TEGRA30: case TEGRA114: case TEGRA124: if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) || IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) || IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC)) tegra30_lp1_iram_hook(); break; default: break; } if (!tegra_lp1_iram.start_addr || !tegra_lp1_iram.end_addr) return false; iram_save_size = tegra_lp1_iram.end_addr - tegra_lp1_iram.start_addr; iram_save_addr = kmalloc(iram_save_size, GFP_KERNEL); if (!iram_save_addr) return false; return true; } static bool tegra_sleep_core_init(void) { switch (tegra_get_chip_id()) { case TEGRA20: if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) tegra20_sleep_core_init(); break; case TEGRA30: case TEGRA114: case TEGRA124: if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) || IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) || IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC)) tegra30_sleep_core_init(); break; default: break; } if (!tegra_sleep_core_finish) return false; return true; } static void tegra_suspend_enter_lp1(void) { /* copy the reset vector & SDRAM shutdown code into IRAM */ memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), iram_save_size); memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), tegra_lp1_iram.start_addr, iram_save_size); *((u32 *)tegra_cpu_lp1_mask) = 1; } static void tegra_suspend_exit_lp1(void) { /* restore IRAM */ memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), iram_save_addr, iram_save_size); *(u32 *)tegra_cpu_lp1_mask = 0; } static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = { [TEGRA_SUSPEND_NONE] = "none", [TEGRA_SUSPEND_LP2] = "LP2", [TEGRA_SUSPEND_LP1] = "LP1", [TEGRA_SUSPEND_LP0] = "LP0", }; static int tegra_suspend_enter(suspend_state_t state) { enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode(); if (WARN_ON(mode < TEGRA_SUSPEND_NONE || mode >= TEGRA_MAX_SUSPEND_MODE)) return -EINVAL; pr_info("Entering suspend state %s\n", lp_state[mode]); tegra_pm_set(mode); local_fiq_disable(); suspend_cpu_complex(); switch (mode) { case TEGRA_SUSPEND_LP1: tegra_suspend_enter_lp1(); break; case TEGRA_SUSPEND_LP2: tegra_pm_set_cpu_in_lp2(); break; default: break; } cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, tegra_sleep_func); /* * Resume L2 cache if it wasn't re-enabled early during resume, * which is the case for Tegra30 that has to re-enable the cache * via firmware call. In other cases cache is already enabled and * hence re-enabling is a no-op. */ outer_resume(); switch (mode) { case TEGRA_SUSPEND_LP1: tegra_suspend_exit_lp1(); break; case TEGRA_SUSPEND_LP2: tegra_pm_clear_cpu_in_lp2(); break; default: break; } restore_cpu_complex(); local_fiq_enable(); call_firmware_op(prepare_idle, TF_PM_MODE_NONE); return 0; } static const struct platform_suspend_ops tegra_suspend_ops = { .valid = suspend_valid_only_mem, .enter = tegra_suspend_enter, }; void __init tegra_init_suspend(void) { enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode(); if (mode == TEGRA_SUSPEND_NONE) return; tegra_tear_down_cpu_init(); if (mode >= TEGRA_SUSPEND_LP1) { if (!tegra_lp1_iram_hook() || !tegra_sleep_core_init()) { pr_err("%s: unable to allocate memory for SDRAM" "self-refresh -- LP0/LP1 unavailable\n", __func__); tegra_pmc_set_suspend_mode(TEGRA_SUSPEND_LP2); mode = TEGRA_SUSPEND_LP2; } } /* set up sleep function for cpu_suspend */ switch (mode) { case TEGRA_SUSPEND_LP1: tegra_sleep_func = tegra_sleep_core; break; case TEGRA_SUSPEND_LP2: tegra_sleep_func = tegra_sleep_cpu; break; default: break; } suspend_set_ops(&tegra_suspend_ops); } int tegra_pm_park_secondary_cpu(unsigned long cpu) { if (cpu > 0) { tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS); if (tegra_get_chip_id() == TEGRA20) tegra20_hotplug_shutdown(); else tegra30_hotplug_shutdown(); } return -EINVAL; } #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1