Contributors: 11
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Paul Gortmaker |
315 |
69.54% |
1 |
8.33% |
| Jeremy McNicoll |
116 |
25.61% |
1 |
8.33% |
| Dongsheng Wang |
5 |
1.10% |
1 |
8.33% |
| Dmitry Eremin-Solenikov |
4 |
0.88% |
1 |
8.33% |
| Jia Hongtao |
3 |
0.66% |
1 |
8.33% |
| Kyle Moffett |
3 |
0.66% |
2 |
16.67% |
| Kumar Gala |
2 |
0.44% |
1 |
8.33% |
| Thomas Gleixner |
2 |
0.44% |
1 |
8.33% |
| Mike Rapoport |
1 |
0.22% |
1 |
8.33% |
| Arun Sharma |
1 |
0.22% |
1 |
8.33% |
| Benjamin Herrenschmidt |
1 |
0.22% |
1 |
8.33% |
| Total |
453 |
|
12 |
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Wind River SBC8548 setup and early boot code.
*
* Copyright 2007 Wind River Systems Inc.
*
* By Paul Gortmaker (see MAINTAINERS for contact information)
*
* Based largely on the MPC8548CDS support - Copyright 2005 Freescale Inc.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/initrd.h>
#include <linux/interrupt.h>
#include <linux/fsl_devices.h>
#include <linux/of_platform.h>
#include <linux/pgtable.h>
#include <asm/page.h>
#include <linux/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/ipic.h>
#include <asm/pci-bridge.h>
#include <asm/irq.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include "mpc85xx.h"
static int sbc_rev;
static void __init sbc8548_pic_init(void)
{
struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
mpic_init(mpic);
}
/* Extract the HW Rev from the EPLD on the board */
static int __init sbc8548_hw_rev(void)
{
struct device_node *np;
struct resource res;
unsigned int *rev;
int board_rev = 0;
np = of_find_compatible_node(NULL, NULL, "hw-rev");
if (np == NULL) {
printk("No HW-REV found in DTB.\n");
return -ENODEV;
}
of_address_to_resource(np, 0, &res);
of_node_put(np);
rev = ioremap(res.start,sizeof(unsigned int));
board_rev = (*rev) >> 28;
iounmap(rev);
return board_rev;
}
/*
* Setup the architecture
*/
static void __init sbc8548_setup_arch(void)
{
if (ppc_md.progress)
ppc_md.progress("sbc8548_setup_arch()", 0);
fsl_pci_assign_primary();
sbc_rev = sbc8548_hw_rev();
}
static void sbc8548_show_cpuinfo(struct seq_file *m)
{
uint pvid, svid, phid1;
pvid = mfspr(SPRN_PVR);
svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: Wind River\n");
seq_printf(m, "Machine\t\t: SBC8548 v%d\n", sbc_rev);
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
/* Display cpu Pll setting */
phid1 = mfspr(SPRN_HID1);
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
}
machine_arch_initcall(sbc8548, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
*/
static int __init sbc8548_probe(void)
{
return of_machine_is_compatible("SBC8548");
}
define_machine(sbc8548) {
.name = "SBC8548",
.probe = sbc8548_probe,
.setup_arch = sbc8548_setup_arch,
.init_IRQ = sbc8548_pic_init,
.show_cpuinfo = sbc8548_show_cpuinfo,
.get_irq = mpic_get_irq,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
.pcibios_fixup_phb = fsl_pcibios_fixup_phb,
#endif
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};