Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Pu Wen | 1407 | 99.72% | 3 | 60.00% |
Peter Zijlstra | 3 | 0.21% | 1 | 20.00% |
Josh Poimboeuf | 1 | 0.07% | 1 | 20.00% |
Total | 1411 | 5 |
// SPDX-License-Identifier: GPL-2.0+ /* * Hygon Processor Support for Linux * * Copyright (C) 2018 Chengdu Haiguang IC Design Co., Ltd. * * Author: Pu Wen <puwen@hygon.cn> */ #include <linux/io.h> #include <asm/cpu.h> #include <asm/smp.h> #include <asm/numa.h> #include <asm/cacheinfo.h> #include <asm/spec-ctrl.h> #include <asm/delay.h> #ifdef CONFIG_X86_64 # include <asm/set_memory.h> #endif #include "cpu.h" #define APICID_SOCKET_ID_BIT 6 /* * nodes_per_socket: Stores the number of nodes per socket. * Refer to CPUID Fn8000_001E_ECX Node Identifiers[10:8] */ static u32 nodes_per_socket = 1; #ifdef CONFIG_NUMA /* * To workaround broken NUMA config. Read the comment in * srat_detect_node(). */ static int nearby_node(int apicid) { int i, node; for (i = apicid - 1; i >= 0; i--) { node = __apicid_to_node[i]; if (node != NUMA_NO_NODE && node_online(node)) return node; } for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { node = __apicid_to_node[i]; if (node != NUMA_NO_NODE && node_online(node)) return node; } return first_node(node_online_map); /* Shouldn't happen */ } #endif static void hygon_get_topology_early(struct cpuinfo_x86 *c) { if (cpu_has(c, X86_FEATURE_TOPOEXT)) smp_num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1; } /* * Fixup core topology information for * (1) Hygon multi-node processors * Assumption: Number of cores in each internal node is the same. * (2) Hygon processors supporting compute units */ static void hygon_get_topology(struct cpuinfo_x86 *c) { u8 node_id; int cpu = smp_processor_id(); /* get information required for multi-node processors */ if (boot_cpu_has(X86_FEATURE_TOPOEXT)) { int err; u32 eax, ebx, ecx, edx; cpuid(0x8000001e, &eax, &ebx, &ecx, &edx); node_id = ecx & 0xff; c->cpu_core_id = ebx & 0xff; if (smp_num_siblings > 1) c->x86_max_cores /= smp_num_siblings; /* * In case leaf B is available, use it to derive * topology information. */ err = detect_extended_topology(c); if (!err) c->x86_coreid_bits = get_count_order(c->x86_max_cores); /* Socket ID is ApicId[6] for these processors. */ c->phys_proc_id = c->apicid >> APICID_SOCKET_ID_BIT; cacheinfo_hygon_init_llc_id(c, cpu, node_id); } else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) { u64 value; rdmsrl(MSR_FAM10H_NODE_ID, value); node_id = value & 7; per_cpu(cpu_llc_id, cpu) = node_id; } else return; if (nodes_per_socket > 1) set_cpu_cap(c, X86_FEATURE_AMD_DCM); } /* * On Hygon setup the lower bits of the APIC id distinguish the cores. * Assumes number of cores is a power of two. */ static void hygon_detect_cmp(struct cpuinfo_x86 *c) { unsigned int bits; int cpu = smp_processor_id(); bits = c->x86_coreid_bits; /* Low order bits define the core id (index of core in socket) */ c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); /* Convert the initial APIC ID into the socket ID */ c->phys_proc_id = c->initial_apicid >> bits; /* use socket ID also for last level cache */ per_cpu(cpu_llc_id, cpu) = c->phys_proc_id; } static void srat_detect_node(struct cpuinfo_x86 *c) { #ifdef CONFIG_NUMA int cpu = smp_processor_id(); int node; unsigned int apicid = c->apicid; node = numa_cpu_node(cpu); if (node == NUMA_NO_NODE) node = per_cpu(cpu_llc_id, cpu); /* * On multi-fabric platform (e.g. Numascale NumaChip) a * platform-specific handler needs to be called to fixup some * IDs of the CPU. */ if (x86_cpuinit.fixup_cpu_id) x86_cpuinit.fixup_cpu_id(c, node); if (!node_online(node)) { /* * Two possibilities here: * * - The CPU is missing memory and no node was created. In * that case try picking one from a nearby CPU. * * - The APIC IDs differ from the HyperTransport node IDs. * Assume they are all increased by a constant offset, but * in the same order as the HT nodeids. If that doesn't * result in a usable node fall back to the path for the * previous case. * * This workaround operates directly on the mapping between * APIC ID and NUMA node, assuming certain relationship * between APIC ID, HT node ID and NUMA topology. As going * through CPU mapping may alter the outcome, directly * access __apicid_to_node[]. */ int ht_nodeid = c->initial_apicid; if (__apicid_to_node[ht_nodeid] != NUMA_NO_NODE) node = __apicid_to_node[ht_nodeid]; /* Pick a nearby node */ if (!node_online(node)) node = nearby_node(apicid); } numa_set_node(cpu, node); #endif } static void early_init_hygon_mc(struct cpuinfo_x86 *c) { #ifdef CONFIG_SMP unsigned int bits, ecx; /* Multi core CPU? */ if (c->extended_cpuid_level < 0x80000008) return; ecx = cpuid_ecx(0x80000008); c->x86_max_cores = (ecx & 0xff) + 1; /* CPU telling us the core id bits shift? */ bits = (ecx >> 12) & 0xF; /* Otherwise recompute */ if (bits == 0) { while ((1 << bits) < c->x86_max_cores) bits++; } c->x86_coreid_bits = bits; #endif } static void bsp_init_hygon(struct cpuinfo_x86 *c) { #ifdef CONFIG_X86_64 unsigned long long tseg; /* * Split up direct mapping around the TSEG SMM area. * Don't do it for gbpages because there seems very little * benefit in doing so. */ if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) { unsigned long pfn = tseg >> PAGE_SHIFT; pr_debug("tseg: %010llx\n", tseg); if (pfn_range_is_mapped(pfn, pfn + 1)) set_memory_4k((unsigned long)__va(tseg), 1); } #endif if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) { u64 val; rdmsrl(MSR_K7_HWCR, val); if (!(val & BIT(24))) pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n"); } if (cpu_has(c, X86_FEATURE_MWAITX)) use_mwaitx_delay(); if (boot_cpu_has(X86_FEATURE_TOPOEXT)) { u32 ecx; ecx = cpuid_ecx(0x8000001e); nodes_per_socket = ((ecx >> 8) & 7) + 1; } else if (boot_cpu_has(X86_FEATURE_NODEID_MSR)) { u64 value; rdmsrl(MSR_FAM10H_NODE_ID, value); nodes_per_socket = ((value >> 3) & 7) + 1; } if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) && !boot_cpu_has(X86_FEATURE_VIRT_SSBD)) { /* * Try to cache the base value so further operations can * avoid RMW. If that faults, do not enable SSBD. */ if (!rdmsrl_safe(MSR_AMD64_LS_CFG, &x86_amd_ls_cfg_base)) { setup_force_cpu_cap(X86_FEATURE_LS_CFG_SSBD); setup_force_cpu_cap(X86_FEATURE_SSBD); x86_amd_ls_cfg_ssbd_mask = 1ULL << 10; } } } static void early_init_hygon(struct cpuinfo_x86 *c) { u32 dummy; early_init_hygon_mc(c); set_cpu_cap(c, X86_FEATURE_K8); rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); /* * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate * with P/T states and does not stop in deep C-states */ if (c->x86_power & (1 << 8)) { set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC); } /* Bit 12 of 8000_0007 edx is accumulated power mechanism. */ if (c->x86_power & BIT(12)) set_cpu_cap(c, X86_FEATURE_ACC_POWER); #ifdef CONFIG_X86_64 set_cpu_cap(c, X86_FEATURE_SYSCALL32); #endif #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI) /* * ApicID can always be treated as an 8-bit value for Hygon APIC So, we * can safely set X86_FEATURE_EXTD_APICID unconditionally. */ if (boot_cpu_has(X86_FEATURE_APIC)) set_cpu_cap(c, X86_FEATURE_EXTD_APICID); #endif /* * This is only needed to tell the kernel whether to use VMCALL * and VMMCALL. VMMCALL is never executed except under virt, so * we can set it unconditionally. */ set_cpu_cap(c, X86_FEATURE_VMMCALL); hygon_get_topology_early(c); } static void init_hygon(struct cpuinfo_x86 *c) { early_init_hygon(c); /* * Bit 31 in normal CPUID used for nonstandard 3DNow ID; * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ clear_cpu_cap(c, 0*32+31); set_cpu_cap(c, X86_FEATURE_REP_GOOD); /* get apicid instead of initial apic id from cpuid */ c->apicid = hard_smp_processor_id(); set_cpu_cap(c, X86_FEATURE_ZEN); set_cpu_cap(c, X86_FEATURE_CPB); cpu_detect_cache_sizes(c); hygon_detect_cmp(c); hygon_get_topology(c); srat_detect_node(c); init_hygon_cacheinfo(c); if (cpu_has(c, X86_FEATURE_XMM2)) { /* * Use LFENCE for execution serialization. On families which * don't have that MSR, LFENCE is already serializing. * msr_set_bit() uses the safe accessors, too, even if the MSR * is not present. */ msr_set_bit(MSR_F10H_DECFG, MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT); /* A serializing LFENCE stops RDTSC speculation */ set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); } /* * Hygon processors have APIC timer running in deep C states. */ set_cpu_cap(c, X86_FEATURE_ARAT); /* Hygon CPUs don't reset SS attributes on SYSRET, Xen does. */ if (!cpu_has(c, X86_FEATURE_XENPV)) set_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS); } static void cpu_detect_tlb_hygon(struct cpuinfo_x86 *c) { u32 ebx, eax, ecx, edx; u16 mask = 0xfff; if (c->extended_cpuid_level < 0x80000006) return; cpuid(0x80000006, &eax, &ebx, &ecx, &edx); tlb_lld_4k[ENTRIES] = (ebx >> 16) & mask; tlb_lli_4k[ENTRIES] = ebx & mask; /* Handle DTLB 2M and 4M sizes, fall back to L1 if L2 is disabled */ if (!((eax >> 16) & mask)) tlb_lld_2m[ENTRIES] = (cpuid_eax(0x80000005) >> 16) & 0xff; else tlb_lld_2m[ENTRIES] = (eax >> 16) & mask; /* a 4M entry uses two 2M entries */ tlb_lld_4m[ENTRIES] = tlb_lld_2m[ENTRIES] >> 1; /* Handle ITLB 2M and 4M sizes, fall back to L1 if L2 is disabled */ if (!(eax & mask)) { cpuid(0x80000005, &eax, &ebx, &ecx, &edx); tlb_lli_2m[ENTRIES] = eax & 0xff; } else tlb_lli_2m[ENTRIES] = eax & mask; tlb_lli_4m[ENTRIES] = tlb_lli_2m[ENTRIES] >> 1; } static const struct cpu_dev hygon_cpu_dev = { .c_vendor = "Hygon", .c_ident = { "HygonGenuine" }, .c_early_init = early_init_hygon, .c_detect_tlb = cpu_detect_tlb_hygon, .c_bsp_init = bsp_init_hygon, .c_init = init_hygon, .c_x86_vendor = X86_VENDOR_HYGON, }; cpu_dev_register(hygon_cpu_dev);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1