Contributors: 36
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Venkatesh Pallipadi |
715 |
28.33% |
5 |
10.20% |
| Andreas Herrmann |
562 |
22.27% |
4 |
8.16% |
| Udo A. Steinberg |
262 |
10.38% |
2 |
4.08% |
| Carlos Corbacho |
184 |
7.29% |
2 |
4.08% |
| Tony Luck |
152 |
6.02% |
2 |
4.08% |
| Suresh B. Siddha |
119 |
4.71% |
2 |
4.08% |
| Björn Helgaas |
107 |
4.24% |
1 |
2.04% |
| Aravind Gopalakrishnan |
100 |
3.96% |
1 |
2.04% |
| Peter Neubauer |
51 |
2.02% |
1 |
2.04% |
| Thomas Gleixner |
49 |
1.94% |
2 |
4.08% |
| Lukas Wunner |
35 |
1.39% |
1 |
2.04% |
| Borislav Petkov |
24 |
0.95% |
1 |
2.04% |
| Prarit Bhargava |
18 |
0.71% |
1 |
2.04% |
| Andrew Morton |
18 |
0.71% |
1 |
2.04% |
| Andi Kleen |
15 |
0.59% |
2 |
4.08% |
| Matthew Wilcox |
11 |
0.44% |
1 |
2.04% |
| Alistair John Strachan |
9 |
0.36% |
1 |
2.04% |
| Joe Buehler |
9 |
0.36% |
1 |
2.04% |
| Janne Kulmala |
9 |
0.36% |
1 |
2.04% |
| Zbigniew Luszpinski |
9 |
0.36% |
1 |
2.04% |
| Alan Cox |
9 |
0.36% |
1 |
2.04% |
| Udo van den Heuvel |
9 |
0.36% |
1 |
2.04% |
| Krzysztof Piotr Oledzki |
9 |
0.36% |
1 |
2.04% |
| Daniel J Blueman |
9 |
0.36% |
1 |
2.04% |
| Harvey Harrison |
8 |
0.32% |
1 |
2.04% |
| Randy Dunlap |
5 |
0.20% |
1 |
2.04% |
| Stoyan Gaydarov |
3 |
0.12% |
1 |
2.04% |
| Sergei Shtylyov |
3 |
0.12% |
1 |
2.04% |
| Yi Wang |
3 |
0.12% |
1 |
2.04% |
| Arnd Bergmann |
2 |
0.08% |
1 |
2.04% |
| Dely Sy |
1 |
0.04% |
1 |
2.04% |
| Greg Kroah-Hartman |
1 |
0.04% |
1 |
2.04% |
| Jiri Slaby |
1 |
0.04% |
1 |
2.04% |
| Christoph Hellwig |
1 |
0.04% |
1 |
2.04% |
| Jan Beulich |
1 |
0.04% |
1 |
2.04% |
| Adrian Bunk |
1 |
0.04% |
1 |
2.04% |
| Total |
2524 |
|
49 |
|
// SPDX-License-Identifier: GPL-2.0
/*
* This file contains work-arounds for x86 and x86_64 platform bugs.
*/
#include <linux/dmi.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <asm/hpet.h>
#include <asm/setup.h>
#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
static void quirk_intel_irqbalance(struct pci_dev *dev)
{
u8 config;
u16 word;
/* BIOS may enable hardware IRQ balancing for
* E7520/E7320/E7525(revision ID 0x9 and below)
* based platforms.
* Disable SW irqbalance/affinity on those platforms.
*/
if (dev->revision > 0x9)
return;
/* enable access to config space*/
pci_read_config_byte(dev, 0xf4, &config);
pci_write_config_byte(dev, 0xf4, config|0x2);
/*
* read xTPR register. We may not have a pci_dev for device 8
* because it might be hidden until the above write.
*/
pci_bus_read_config_word(dev->bus, PCI_DEVFN(8, 0), 0x4c, &word);
if (!(word & (1 << 13))) {
dev_info(&dev->dev, "Intel E7520/7320/7525 detected; "
"disabling irq balancing and affinity\n");
noirqdebug_setup("");
#ifdef CONFIG_PROC_FS
no_irq_affinity = 1;
#endif
}
/* put back the original value for config space*/
if (!(config & 0x2))
pci_write_config_byte(dev, 0xf4, config);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH,
quirk_intel_irqbalance);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH,
quirk_intel_irqbalance);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH,
quirk_intel_irqbalance);
#endif
#if defined(CONFIG_HPET_TIMER)
unsigned long force_hpet_address;
static enum {
NONE_FORCE_HPET_RESUME,
OLD_ICH_FORCE_HPET_RESUME,
ICH_FORCE_HPET_RESUME,
VT8237_FORCE_HPET_RESUME,
NVIDIA_FORCE_HPET_RESUME,
ATI_FORCE_HPET_RESUME,
} force_hpet_resume_type;
static void __iomem *rcba_base;
static void ich_force_hpet_resume(void)
{
u32 val;
if (!force_hpet_address)
return;
BUG_ON(rcba_base == NULL);
/* read the Function Disable register, dword mode only */
val = readl(rcba_base + 0x3404);
if (!(val & 0x80)) {
/* HPET disabled in HPTC. Trying to enable */
writel(val | 0x80, rcba_base + 0x3404);
}
val = readl(rcba_base + 0x3404);
if (!(val & 0x80))
BUG();
else
printk(KERN_DEBUG "Force enabled HPET at resume\n");
}
static void ich_force_enable_hpet(struct pci_dev *dev)
{
u32 val;
u32 rcba;
int err = 0;
if (hpet_address || force_hpet_address)
return;
pci_read_config_dword(dev, 0xF0, &rcba);
rcba &= 0xFFFFC000;
if (rcba == 0) {
dev_printk(KERN_DEBUG, &dev->dev, "RCBA disabled; "
"cannot force enable HPET\n");
return;
}
/* use bits 31:14, 16 kB aligned */
rcba_base = ioremap(rcba, 0x4000);
if (rcba_base == NULL) {
dev_printk(KERN_DEBUG, &dev->dev, "ioremap failed; "
"cannot force enable HPET\n");
return;
}
/* read the Function Disable register, dword mode only */
val = readl(rcba_base + 0x3404);
if (val & 0x80) {
/* HPET is enabled in HPTC. Just not reported by BIOS */
val = val & 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
"0x%lx\n", force_hpet_address);
iounmap(rcba_base);
return;
}
/* HPET disabled in HPTC. Trying to enable */
writel(val | 0x80, rcba_base + 0x3404);
val = readl(rcba_base + 0x3404);
if (!(val & 0x80)) {
err = 1;
} else {
val = val & 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
}
if (err) {
force_hpet_address = 0;
iounmap(rcba_base);
dev_printk(KERN_DEBUG, &dev->dev,
"Failed to force enable HPET\n");
} else {
force_hpet_resume_type = ICH_FORCE_HPET_RESUME;
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
"0x%lx\n", force_hpet_address);
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7,
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x3a16, /* ICH10 */
ich_force_enable_hpet);
static struct pci_dev *cached_dev;
static void hpet_print_force_info(void)
{
printk(KERN_INFO "HPET not enabled in BIOS. "
"You might try hpet=force boot option\n");
}
static void old_ich_force_hpet_resume(void)
{
u32 val;
u32 gen_cntl;
if (!force_hpet_address || !cached_dev)
return;
pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
gen_cntl &= (~(0x7 << 15));
gen_cntl |= (0x4 << 15);
pci_write_config_dword(cached_dev, 0xD0, gen_cntl);
pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
val = gen_cntl >> 15;
val &= 0x7;
if (val == 0x4)
printk(KERN_DEBUG "Force enabled HPET at resume\n");
else
BUG();
}
static void old_ich_force_enable_hpet(struct pci_dev *dev)
{
u32 val;
u32 gen_cntl;
if (hpet_address || force_hpet_address)
return;
pci_read_config_dword(dev, 0xD0, &gen_cntl);
/*
* Bit 17 is HPET enable bit.
* Bit 16:15 control the HPET base address.
*/
val = gen_cntl >> 15;
val &= 0x7;
if (val & 0x4) {
val &= 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
force_hpet_address);
return;
}
/*
* HPET is disabled. Trying enabling at FED00000 and check
* whether it sticks
*/
gen_cntl &= (~(0x7 << 15));
gen_cntl |= (0x4 << 15);
pci_write_config_dword(dev, 0xD0, gen_cntl);
pci_read_config_dword(dev, 0xD0, &gen_cntl);
val = gen_cntl >> 15;
val &= 0x7;
if (val & 0x4) {
/* HPET is enabled in HPTC. Just not reported by BIOS */
val &= 0x3;
force_hpet_address = 0xFED00000 | (val << 12);
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
"0x%lx\n", force_hpet_address);
cached_dev = dev;
force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME;
return;
}
dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
}
/*
* Undocumented chipset features. Make sure that the user enforced
* this.
*/
static void old_ich_force_enable_hpet_user(struct pci_dev *dev)
{
if (hpet_force_user)
old_ich_force_enable_hpet(dev);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
old_ich_force_enable_hpet_user);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
old_ich_force_enable_hpet_user);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12,
old_ich_force_enable_hpet_user);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
old_ich_force_enable_hpet_user);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12,
old_ich_force_enable_hpet_user);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
old_ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_12,
old_ich_force_enable_hpet);
static void vt8237_force_hpet_resume(void)
{
u32 val;
if (!force_hpet_address || !cached_dev)
return;
val = 0xfed00000 | 0x80;
pci_write_config_dword(cached_dev, 0x68, val);
pci_read_config_dword(cached_dev, 0x68, &val);
if (val & 0x80)
printk(KERN_DEBUG "Force enabled HPET at resume\n");
else
BUG();
}
static void vt8237_force_enable_hpet(struct pci_dev *dev)
{
u32 val;
if (hpet_address || force_hpet_address)
return;
if (!hpet_force_user) {
hpet_print_force_info();
return;
}
pci_read_config_dword(dev, 0x68, &val);
/*
* Bit 7 is HPET enable bit.
* Bit 31:10 is HPET base address (contrary to what datasheet claims)
*/
if (val & 0x80) {
force_hpet_address = (val & ~0x3ff);
dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
force_hpet_address);
return;
}
/*
* HPET is disabled. Trying enabling at FED00000 and check
* whether it sticks
*/
val = 0xfed00000 | 0x80;
pci_write_config_dword(dev, 0x68, val);
pci_read_config_dword(dev, 0x68, &val);
if (val & 0x80) {
force_hpet_address = (val & ~0x3ff);
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
"0x%lx\n", force_hpet_address);
cached_dev = dev;
force_hpet_resume_type = VT8237_FORCE_HPET_RESUME;
return;
}
dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235,
vt8237_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
vt8237_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700,
vt8237_force_enable_hpet);
static void ati_force_hpet_resume(void)
{
pci_write_config_dword(cached_dev, 0x14, 0xfed00000);
printk(KERN_DEBUG "Force enabled HPET at resume\n");
}
static u32 ati_ixp4x0_rev(struct pci_dev *dev)
{
int err = 0;
u32 d = 0;
u8 b = 0;
err = pci_read_config_byte(dev, 0xac, &b);
b &= ~(1<<5);
err |= pci_write_config_byte(dev, 0xac, b);
err |= pci_read_config_dword(dev, 0x70, &d);
d |= 1<<8;
err |= pci_write_config_dword(dev, 0x70, d);
err |= pci_read_config_dword(dev, 0x8, &d);
d &= 0xff;
dev_printk(KERN_DEBUG, &dev->dev, "SB4X0 revision 0x%x\n", d);
WARN_ON_ONCE(err);
return d;
}
static void ati_force_enable_hpet(struct pci_dev *dev)
{
u32 d, val;
u8 b;
if (hpet_address || force_hpet_address)
return;
if (!hpet_force_user) {
hpet_print_force_info();
return;
}
d = ati_ixp4x0_rev(dev);
if (d < 0x82)
return;
/* base address */
pci_write_config_dword(dev, 0x14, 0xfed00000);
pci_read_config_dword(dev, 0x14, &val);
/* enable interrupt */
outb(0x72, 0xcd6); b = inb(0xcd7);
b |= 0x1;
outb(0x72, 0xcd6); outb(b, 0xcd7);
outb(0x72, 0xcd6); b = inb(0xcd7);
if (!(b & 0x1))
return;
pci_read_config_dword(dev, 0x64, &d);
d |= (1<<10);
pci_write_config_dword(dev, 0x64, d);
pci_read_config_dword(dev, 0x64, &d);
if (!(d & (1<<10)))
return;
force_hpet_address = val;
force_hpet_resume_type = ATI_FORCE_HPET_RESUME;
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
force_hpet_address);
cached_dev = dev;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
ati_force_enable_hpet);
/*
* Undocumented chipset feature taken from LinuxBIOS.
*/
static void nvidia_force_hpet_resume(void)
{
pci_write_config_dword(cached_dev, 0x44, 0xfed00001);
printk(KERN_DEBUG "Force enabled HPET at resume\n");
}
static void nvidia_force_enable_hpet(struct pci_dev *dev)
{
u32 val;
if (hpet_address || force_hpet_address)
return;
if (!hpet_force_user) {
hpet_print_force_info();
return;
}
pci_write_config_dword(dev, 0x44, 0xfed00001);
pci_read_config_dword(dev, 0x44, &val);
force_hpet_address = val & 0xfffffffe;
force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME;
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
force_hpet_address);
cached_dev = dev;
}
/* ISA Bridges */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0050,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0051,
nvidia_force_enable_hpet);
/* LPC bridges */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0260,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0360,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0361,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0362,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0363,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0364,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0365,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0366,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0367,
nvidia_force_enable_hpet);
void force_hpet_resume(void)
{
switch (force_hpet_resume_type) {
case ICH_FORCE_HPET_RESUME:
ich_force_hpet_resume();
return;
case OLD_ICH_FORCE_HPET_RESUME:
old_ich_force_hpet_resume();
return;
case VT8237_FORCE_HPET_RESUME:
vt8237_force_hpet_resume();
return;
case NVIDIA_FORCE_HPET_RESUME:
nvidia_force_hpet_resume();
return;
case ATI_FORCE_HPET_RESUME:
ati_force_hpet_resume();
return;
default:
break;
}
}
/*
* According to the datasheet e6xx systems have the HPET hardwired to
* 0xfed00000
*/
static void e6xx_force_enable_hpet(struct pci_dev *dev)
{
if (hpet_address || force_hpet_address)
return;
force_hpet_address = 0xFED00000;
force_hpet_resume_type = NONE_FORCE_HPET_RESUME;
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
"0x%lx\n", force_hpet_address);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E6XX_CU,
e6xx_force_enable_hpet);
/*
* HPET MSI on some boards (ATI SB700/SB800) has side effect on
* floppy DMA. Disable HPET MSI on such platforms.
* See erratum #27 (Misinterpreted MSI Requests May Result in
* Corrupted LPC DMA Data) in AMD Publication #46837,
* "SB700 Family Product Errata", Rev. 1.0, March 2010.
*/
static void force_disable_hpet_msi(struct pci_dev *unused)
{
hpet_msi_disable = true;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
force_disable_hpet_msi);
#endif
#if defined(CONFIG_PCI) && defined(CONFIG_NUMA)
/* Set correct numa_node information for AMD NB functions */
static void quirk_amd_nb_node(struct pci_dev *dev)
{
struct pci_dev *nb_ht;
unsigned int devfn;
u32 node;
u32 val;
devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0);
nb_ht = pci_get_slot(dev->bus, devfn);
if (!nb_ht)
return;
pci_read_config_dword(nb_ht, 0x60, &val);
node = pcibus_to_node(dev->bus) | (val & 7);
/*
* Some hardware may return an invalid node ID,
* so check it first:
*/
if (node_online(node))
set_dev_node(&dev->dev, node);
pci_dev_put(nb_ht);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MEMCTL,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_HT,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MAP,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_DRAM,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F0,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F1,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F2,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F5,
quirk_amd_nb_node);
#endif
#ifdef CONFIG_PCI
/*
* Processor does not ensure DRAM scrub read/write sequence
* is atomic wrt accesses to CC6 save state area. Therefore
* if a concurrent scrub read/write access is to same address
* the entry may appear as if it is not written. This quirk
* applies to Fam16h models 00h-0Fh
*
* See "Revision Guide" for AMD F16h models 00h-0fh,
* document 51810 rev. 3.04, Nov 2013
*/
static void amd_disable_seq_and_redirect_scrub(struct pci_dev *dev)
{
u32 val;
/*
* Suggested workaround:
* set D18F3x58[4:0] = 00h and set D18F3x5C[0] = 0b
*/
pci_read_config_dword(dev, 0x58, &val);
if (val & 0x1F) {
val &= ~(0x1F);
pci_write_config_dword(dev, 0x58, val);
}
pci_read_config_dword(dev, 0x5C, &val);
if (val & BIT(0)) {
val &= ~BIT(0);
pci_write_config_dword(dev, 0x5c, val);
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3,
amd_disable_seq_and_redirect_scrub);
#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
#include <linux/jump_label.h>
#include <asm/string_64.h>
/* Ivy Bridge, Haswell, Broadwell */
static void quirk_intel_brickland_xeon_ras_cap(struct pci_dev *pdev)
{
u32 capid0;
pci_read_config_dword(pdev, 0x84, &capid0);
if (capid0 & 0x10)
static_branch_inc(&mcsafe_key);
}
/* Skylake */
static void quirk_intel_purley_xeon_ras_cap(struct pci_dev *pdev)
{
u32 capid0, capid5;
pci_read_config_dword(pdev, 0x84, &capid0);
pci_read_config_dword(pdev, 0x98, &capid5);
/*
* CAPID0{7:6} indicate whether this is an advanced RAS SKU
* CAPID5{8:5} indicate that various NVDIMM usage modes are
* enabled, so memory machine check recovery is also enabled.
*/
if ((capid0 & 0xc0) == 0xc0 || (capid5 & 0x1e0))
static_branch_inc(&mcsafe_key);
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x0ec3, quirk_intel_brickland_xeon_ras_cap);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, quirk_intel_brickland_xeon_ras_cap);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, quirk_intel_brickland_xeon_ras_cap);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2083, quirk_intel_purley_xeon_ras_cap);
#endif
#endif
bool x86_apple_machine;
EXPORT_SYMBOL(x86_apple_machine);
void __init early_platform_quirks(void)
{
x86_apple_machine = dmi_match(DMI_SYS_VENDOR, "Apple Inc.") ||
dmi_match(DMI_SYS_VENDOR, "Apple Computer, Inc.");
}