Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Serge Semin | 1693 | 100.00% | 4 | 100.00% |
Total | 1693 | 4 |
// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2020 BAIKAL ELECTRONICS, JSC * * Authors: * Serge Semin <Sergey.Semin@baikalelectronics.ru> * * Baikal-T1 APB-bus driver */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/types.h> #include <linux/device.h> #include <linux/atomic.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/nmi.h> #include <linux/of.h> #include <linux/regmap.h> #include <linux/clk.h> #include <linux/reset.h> #include <linux/time64.h> #include <linux/clk.h> #include <linux/sysfs.h> #define APB_EHB_ISR 0x00 #define APB_EHB_ISR_PENDING BIT(0) #define APB_EHB_ISR_MASK BIT(1) #define APB_EHB_ADDR 0x04 #define APB_EHB_TIMEOUT 0x08 #define APB_EHB_TIMEOUT_MIN 0x000003FFU #define APB_EHB_TIMEOUT_MAX 0xFFFFFFFFU /* * struct bt1_apb - Baikal-T1 APB EHB private data * @dev: Pointer to the device structure. * @regs: APB EHB registers map. * @res: No-device error injection memory region. * @irq: Errors IRQ number. * @rate: APB-bus reference clock rate. * @pclk: APB-reference clock. * @prst: APB domain reset line. * @count: Number of errors detected. */ struct bt1_apb { struct device *dev; struct regmap *regs; void __iomem *res; int irq; unsigned long rate; struct clk *pclk; struct reset_control *prst; atomic_t count; }; static const struct regmap_config bt1_apb_regmap_cfg = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, .max_register = APB_EHB_TIMEOUT, .fast_io = true }; static inline unsigned long bt1_apb_n_to_timeout_us(struct bt1_apb *apb, u32 n) { u64 timeout = (u64)n * USEC_PER_SEC; do_div(timeout, apb->rate); return timeout; } static inline unsigned long bt1_apb_timeout_to_n_us(struct bt1_apb *apb, unsigned long timeout) { u64 n = (u64)timeout * apb->rate; do_div(n, USEC_PER_SEC); return n; } static irqreturn_t bt1_apb_isr(int irq, void *data) { struct bt1_apb *apb = data; u32 addr = 0; regmap_read(apb->regs, APB_EHB_ADDR, &addr); dev_crit_ratelimited(apb->dev, "APB-bus fault %d: Slave access timeout at 0x%08x\n", atomic_inc_return(&apb->count), addr); /* * Print backtrace on each CPU. This might be pointless if the fault * has happened on the same CPU as the IRQ handler is executed or * the other core proceeded further execution despite the error. * But if it's not, by looking at the trace we would get straight to * the cause of the problem. */ trigger_all_cpu_backtrace(); regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_PENDING, 0); return IRQ_HANDLED; } static void bt1_apb_clear_data(void *data) { struct bt1_apb *apb = data; struct platform_device *pdev = to_platform_device(apb->dev); platform_set_drvdata(pdev, NULL); } static struct bt1_apb *bt1_apb_create_data(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct bt1_apb *apb; int ret; apb = devm_kzalloc(dev, sizeof(*apb), GFP_KERNEL); if (!apb) return ERR_PTR(-ENOMEM); ret = devm_add_action(dev, bt1_apb_clear_data, apb); if (ret) { dev_err(dev, "Can't add APB EHB data clear action\n"); return ERR_PTR(ret); } apb->dev = dev; atomic_set(&apb->count, 0); platform_set_drvdata(pdev, apb); return apb; } static int bt1_apb_request_regs(struct bt1_apb *apb) { struct platform_device *pdev = to_platform_device(apb->dev); void __iomem *regs; regs = devm_platform_ioremap_resource_byname(pdev, "ehb"); if (IS_ERR(regs)) { dev_err(apb->dev, "Couldn't map APB EHB registers\n"); return PTR_ERR(regs); } apb->regs = devm_regmap_init_mmio(apb->dev, regs, &bt1_apb_regmap_cfg); if (IS_ERR(apb->regs)) { dev_err(apb->dev, "Couldn't create APB EHB regmap\n"); return PTR_ERR(apb->regs); } apb->res = devm_platform_ioremap_resource_byname(pdev, "nodev"); if (IS_ERR(apb->res)) dev_err(apb->dev, "Couldn't map reserved region\n"); return PTR_ERR_OR_ZERO(apb->res); } static int bt1_apb_request_rst(struct bt1_apb *apb) { int ret; apb->prst = devm_reset_control_get_optional_exclusive(apb->dev, "prst"); if (IS_ERR(apb->prst)) { dev_warn(apb->dev, "Couldn't get reset control line\n"); return PTR_ERR(apb->prst); } ret = reset_control_deassert(apb->prst); if (ret) dev_err(apb->dev, "Failed to deassert the reset line\n"); return ret; } static void bt1_apb_disable_clk(void *data) { struct bt1_apb *apb = data; clk_disable_unprepare(apb->pclk); } static int bt1_apb_request_clk(struct bt1_apb *apb) { int ret; apb->pclk = devm_clk_get(apb->dev, "pclk"); if (IS_ERR(apb->pclk)) { dev_err(apb->dev, "Couldn't get APB clock descriptor\n"); return PTR_ERR(apb->pclk); } ret = clk_prepare_enable(apb->pclk); if (ret) { dev_err(apb->dev, "Couldn't enable the APB clock\n"); return ret; } ret = devm_add_action_or_reset(apb->dev, bt1_apb_disable_clk, apb); if (ret) { dev_err(apb->dev, "Can't add APB EHB clocks disable action\n"); return ret; } apb->rate = clk_get_rate(apb->pclk); if (!apb->rate) { dev_err(apb->dev, "Invalid clock rate\n"); return -EINVAL; } return 0; } static void bt1_apb_clear_irq(void *data) { struct bt1_apb *apb = data; regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_MASK, 0); } static int bt1_apb_request_irq(struct bt1_apb *apb) { struct platform_device *pdev = to_platform_device(apb->dev); int ret; apb->irq = platform_get_irq(pdev, 0); if (apb->irq < 0) return apb->irq; ret = devm_request_irq(apb->dev, apb->irq, bt1_apb_isr, IRQF_SHARED, "bt1-apb", apb); if (ret) { dev_err(apb->dev, "Couldn't request APB EHB IRQ\n"); return ret; } ret = devm_add_action(apb->dev, bt1_apb_clear_irq, apb); if (ret) { dev_err(apb->dev, "Can't add APB EHB IRQs clear action\n"); return ret; } /* Unmask IRQ and clear it' pending flag. */ regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_PENDING | APB_EHB_ISR_MASK, APB_EHB_ISR_MASK); return 0; } static ssize_t count_show(struct device *dev, struct device_attribute *attr, char *buf) { struct bt1_apb *apb = dev_get_drvdata(dev); return scnprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&apb->count)); } static DEVICE_ATTR_RO(count); static ssize_t timeout_show(struct device *dev, struct device_attribute *attr, char *buf) { struct bt1_apb *apb = dev_get_drvdata(dev); unsigned long timeout; int ret; u32 n; ret = regmap_read(apb->regs, APB_EHB_TIMEOUT, &n); if (ret) return ret; timeout = bt1_apb_n_to_timeout_us(apb, n); return scnprintf(buf, PAGE_SIZE, "%lu\n", timeout); } static ssize_t timeout_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct bt1_apb *apb = dev_get_drvdata(dev); unsigned long timeout; int ret; u32 n; if (kstrtoul(buf, 0, &timeout) < 0) return -EINVAL; n = bt1_apb_timeout_to_n_us(apb, timeout); n = clamp(n, APB_EHB_TIMEOUT_MIN, APB_EHB_TIMEOUT_MAX); ret = regmap_write(apb->regs, APB_EHB_TIMEOUT, n); return ret ?: count; } static DEVICE_ATTR_RW(timeout); static ssize_t inject_error_show(struct device *dev, struct device_attribute *attr, char *buf) { return scnprintf(buf, PAGE_SIZE, "Error injection: nodev irq\n"); } static ssize_t inject_error_store(struct device *dev, struct device_attribute *attr, const char *data, size_t count) { struct bt1_apb *apb = dev_get_drvdata(dev); /* * Either dummy read from the unmapped address in the APB IO area * or manually set the IRQ status. */ if (sysfs_streq(data, "nodev")) readl(apb->res); else if (sysfs_streq(data, "irq")) regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_PENDING, APB_EHB_ISR_PENDING); else return -EINVAL; return count; } static DEVICE_ATTR_RW(inject_error); static struct attribute *bt1_apb_sysfs_attrs[] = { &dev_attr_count.attr, &dev_attr_timeout.attr, &dev_attr_inject_error.attr, NULL }; ATTRIBUTE_GROUPS(bt1_apb_sysfs); static void bt1_apb_remove_sysfs(void *data) { struct bt1_apb *apb = data; device_remove_groups(apb->dev, bt1_apb_sysfs_groups); } static int bt1_apb_init_sysfs(struct bt1_apb *apb) { int ret; ret = device_add_groups(apb->dev, bt1_apb_sysfs_groups); if (ret) { dev_err(apb->dev, "Failed to create EHB APB sysfs nodes\n"); return ret; } ret = devm_add_action_or_reset(apb->dev, bt1_apb_remove_sysfs, apb); if (ret) dev_err(apb->dev, "Can't add APB EHB sysfs remove action\n"); return ret; } static int bt1_apb_probe(struct platform_device *pdev) { struct bt1_apb *apb; int ret; apb = bt1_apb_create_data(pdev); if (IS_ERR(apb)) return PTR_ERR(apb); ret = bt1_apb_request_regs(apb); if (ret) return ret; ret = bt1_apb_request_rst(apb); if (ret) return ret; ret = bt1_apb_request_clk(apb); if (ret) return ret; ret = bt1_apb_request_irq(apb); if (ret) return ret; ret = bt1_apb_init_sysfs(apb); if (ret) return ret; return 0; } static const struct of_device_id bt1_apb_of_match[] = { { .compatible = "baikal,bt1-apb" }, { } }; MODULE_DEVICE_TABLE(of, bt1_apb_of_match); static struct platform_driver bt1_apb_driver = { .probe = bt1_apb_probe, .driver = { .name = "bt1-apb", .of_match_table = bt1_apb_of_match } }; module_platform_driver(bt1_apb_driver); MODULE_AUTHOR("Serge Semin <Sergey.Semin@baikalelectronics.ru>"); MODULE_DESCRIPTION("Baikal-T1 APB-bus driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1