Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Daniel Mack | 1802 | 100.00% | 1 | 100.00% |
Total | 1802 | 1 |
// SPDX-License-Identifier: GPL-2.0 #include <linux/module.h> #include <linux/kernel.h> #include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/err.h> #include <linux/errno.h> #include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/regulator/consumer.h> #include <dt-bindings/clock/maxim,max9485.h> #define MAX9485_NUM_CLKS 4 /* This chip has only one register of 8 bit width. */ #define MAX9485_FS_12KHZ (0 << 0) #define MAX9485_FS_32KHZ (1 << 0) #define MAX9485_FS_44_1KHZ (2 << 0) #define MAX9485_FS_48KHZ (3 << 0) #define MAX9485_SCALE_256 (0 << 2) #define MAX9485_SCALE_384 (1 << 2) #define MAX9485_SCALE_768 (2 << 2) #define MAX9485_DOUBLE BIT(4) #define MAX9485_CLKOUT1_ENABLE BIT(5) #define MAX9485_CLKOUT2_ENABLE BIT(6) #define MAX9485_MCLK_ENABLE BIT(7) #define MAX9485_FREQ_MASK 0x1f struct max9485_rate { unsigned long out; u8 reg_value; }; /* * Ordered by frequency. For frequency the hardware can generate with * multiple settings, the one with lowest jitter is listed first. */ static const struct max9485_rate max9485_rates[] = { { 3072000, MAX9485_FS_12KHZ | MAX9485_SCALE_256 }, { 4608000, MAX9485_FS_12KHZ | MAX9485_SCALE_384 }, { 8192000, MAX9485_FS_32KHZ | MAX9485_SCALE_256 }, { 9126000, MAX9485_FS_12KHZ | MAX9485_SCALE_768 }, { 11289600, MAX9485_FS_44_1KHZ | MAX9485_SCALE_256 }, { 12288000, MAX9485_FS_48KHZ | MAX9485_SCALE_256 }, { 12288000, MAX9485_FS_32KHZ | MAX9485_SCALE_384 }, { 16384000, MAX9485_FS_32KHZ | MAX9485_SCALE_256 | MAX9485_DOUBLE }, { 16934400, MAX9485_FS_44_1KHZ | MAX9485_SCALE_384 }, { 18384000, MAX9485_FS_48KHZ | MAX9485_SCALE_384 }, { 22579200, MAX9485_FS_44_1KHZ | MAX9485_SCALE_256 | MAX9485_DOUBLE }, { 24576000, MAX9485_FS_48KHZ | MAX9485_SCALE_256 | MAX9485_DOUBLE }, { 24576000, MAX9485_FS_32KHZ | MAX9485_SCALE_384 | MAX9485_DOUBLE }, { 24576000, MAX9485_FS_32KHZ | MAX9485_SCALE_768 }, { 33868800, MAX9485_FS_44_1KHZ | MAX9485_SCALE_384 | MAX9485_DOUBLE }, { 33868800, MAX9485_FS_44_1KHZ | MAX9485_SCALE_768 }, { 36864000, MAX9485_FS_48KHZ | MAX9485_SCALE_384 | MAX9485_DOUBLE }, { 36864000, MAX9485_FS_48KHZ | MAX9485_SCALE_768 }, { 49152000, MAX9485_FS_32KHZ | MAX9485_SCALE_768 | MAX9485_DOUBLE }, { 67737600, MAX9485_FS_44_1KHZ | MAX9485_SCALE_768 | MAX9485_DOUBLE }, { 73728000, MAX9485_FS_48KHZ | MAX9485_SCALE_768 | MAX9485_DOUBLE }, { } /* sentinel */ }; struct max9485_driver_data; struct max9485_clk_hw { struct clk_hw hw; struct clk_init_data init; u8 enable_bit; struct max9485_driver_data *drvdata; }; struct max9485_driver_data { struct clk *xclk; struct i2c_client *client; u8 reg_value; struct regulator *supply; struct gpio_desc *reset_gpio; struct max9485_clk_hw hw[MAX9485_NUM_CLKS]; }; static inline struct max9485_clk_hw *to_max9485_clk(struct clk_hw *hw) { return container_of(hw, struct max9485_clk_hw, hw); } static int max9485_update_bits(struct max9485_driver_data *drvdata, u8 mask, u8 value) { int ret; drvdata->reg_value &= ~mask; drvdata->reg_value |= value; dev_dbg(&drvdata->client->dev, "updating mask 0x%02x value 0x%02x -> 0x%02x\n", mask, value, drvdata->reg_value); ret = i2c_master_send(drvdata->client, &drvdata->reg_value, sizeof(drvdata->reg_value)); return ret < 0 ? ret : 0; } static int max9485_clk_prepare(struct clk_hw *hw) { struct max9485_clk_hw *clk_hw = to_max9485_clk(hw); return max9485_update_bits(clk_hw->drvdata, clk_hw->enable_bit, clk_hw->enable_bit); } static void max9485_clk_unprepare(struct clk_hw *hw) { struct max9485_clk_hw *clk_hw = to_max9485_clk(hw); max9485_update_bits(clk_hw->drvdata, clk_hw->enable_bit, 0); } /* * CLKOUT - configurable clock output */ static int max9485_clkout_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct max9485_clk_hw *clk_hw = to_max9485_clk(hw); const struct max9485_rate *entry; for (entry = max9485_rates; entry->out != 0; entry++) if (entry->out == rate) break; if (entry->out == 0) return -EINVAL; return max9485_update_bits(clk_hw->drvdata, MAX9485_FREQ_MASK, entry->reg_value); } static unsigned long max9485_clkout_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct max9485_clk_hw *clk_hw = to_max9485_clk(hw); struct max9485_driver_data *drvdata = clk_hw->drvdata; u8 val = drvdata->reg_value & MAX9485_FREQ_MASK; const struct max9485_rate *entry; for (entry = max9485_rates; entry->out != 0; entry++) if (val == entry->reg_value) return entry->out; return 0; } static long max9485_clkout_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *parent_rate) { const struct max9485_rate *curr, *prev = NULL; for (curr = max9485_rates; curr->out != 0; curr++) { /* Exact matches */ if (curr->out == rate) return rate; /* * Find the first entry that has a frequency higher than the * requested one. */ if (curr->out > rate) { unsigned int mid; /* * If this is the first entry, clamp the value to the * lowest possible frequency. */ if (!prev) return curr->out; /* * Otherwise, determine whether the previous entry or * current one is closer. */ mid = prev->out + ((curr->out - prev->out) / 2); return (mid > rate) ? prev->out : curr->out; } prev = curr; } /* If the last entry was still too high, clamp the value */ return prev->out; } struct max9485_clk { const char *name; int parent_index; const struct clk_ops ops; u8 enable_bit; }; static const struct max9485_clk max9485_clks[MAX9485_NUM_CLKS] = { [MAX9485_MCLKOUT] = { .name = "mclkout", .parent_index = -1, .enable_bit = MAX9485_MCLK_ENABLE, .ops = { .prepare = max9485_clk_prepare, .unprepare = max9485_clk_unprepare, }, }, [MAX9485_CLKOUT] = { .name = "clkout", .parent_index = -1, .ops = { .set_rate = max9485_clkout_set_rate, .round_rate = max9485_clkout_round_rate, .recalc_rate = max9485_clkout_recalc_rate, }, }, [MAX9485_CLKOUT1] = { .name = "clkout1", .parent_index = MAX9485_CLKOUT, .enable_bit = MAX9485_CLKOUT1_ENABLE, .ops = { .prepare = max9485_clk_prepare, .unprepare = max9485_clk_unprepare, }, }, [MAX9485_CLKOUT2] = { .name = "clkout2", .parent_index = MAX9485_CLKOUT, .enable_bit = MAX9485_CLKOUT2_ENABLE, .ops = { .prepare = max9485_clk_prepare, .unprepare = max9485_clk_unprepare, }, }, }; static struct clk_hw * max9485_of_clk_get(struct of_phandle_args *clkspec, void *data) { struct max9485_driver_data *drvdata = data; unsigned int idx = clkspec->args[0]; return &drvdata->hw[idx].hw; } static int max9485_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct max9485_driver_data *drvdata; struct device *dev = &client->dev; const char *xclk_name; int i, ret; drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); if (!drvdata) return -ENOMEM; drvdata->xclk = devm_clk_get(dev, "xclk"); if (IS_ERR(drvdata->xclk)) return PTR_ERR(drvdata->xclk); xclk_name = __clk_get_name(drvdata->xclk); drvdata->supply = devm_regulator_get(dev, "vdd"); if (IS_ERR(drvdata->supply)) return PTR_ERR(drvdata->supply); ret = regulator_enable(drvdata->supply); if (ret < 0) return ret; drvdata->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(drvdata->reset_gpio)) return PTR_ERR(drvdata->reset_gpio); i2c_set_clientdata(client, drvdata); drvdata->client = client; ret = i2c_master_recv(drvdata->client, &drvdata->reg_value, sizeof(drvdata->reg_value)); if (ret < 0) { dev_warn(dev, "Unable to read device register: %d\n", ret); return ret; } for (i = 0; i < MAX9485_NUM_CLKS; i++) { int parent_index = max9485_clks[i].parent_index; const char *name; if (of_property_read_string_index(dev->of_node, "clock-output-names", i, &name) == 0) { drvdata->hw[i].init.name = name; } else { drvdata->hw[i].init.name = max9485_clks[i].name; } drvdata->hw[i].init.ops = &max9485_clks[i].ops; drvdata->hw[i].init.num_parents = 1; drvdata->hw[i].init.flags = 0; if (parent_index > 0) { drvdata->hw[i].init.parent_names = &drvdata->hw[parent_index].init.name; drvdata->hw[i].init.flags |= CLK_SET_RATE_PARENT; } else { drvdata->hw[i].init.parent_names = &xclk_name; } drvdata->hw[i].enable_bit = max9485_clks[i].enable_bit; drvdata->hw[i].hw.init = &drvdata->hw[i].init; drvdata->hw[i].drvdata = drvdata; ret = devm_clk_hw_register(dev, &drvdata->hw[i].hw); if (ret < 0) return ret; } return devm_of_clk_add_hw_provider(dev, max9485_of_clk_get, drvdata); } static int __maybe_unused max9485_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct max9485_driver_data *drvdata = i2c_get_clientdata(client); gpiod_set_value_cansleep(drvdata->reset_gpio, 0); return 0; } static int __maybe_unused max9485_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct max9485_driver_data *drvdata = i2c_get_clientdata(client); int ret; gpiod_set_value_cansleep(drvdata->reset_gpio, 1); ret = i2c_master_send(client, &drvdata->reg_value, sizeof(drvdata->reg_value)); return ret < 0 ? ret : 0; } static const struct dev_pm_ops max9485_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(max9485_suspend, max9485_resume) }; static const struct of_device_id max9485_dt_ids[] = { { .compatible = "maxim,max9485", }, { } }; MODULE_DEVICE_TABLE(of, max9485_dt_ids); static const struct i2c_device_id max9485_i2c_ids[] = { { .name = "max9485", }, { } }; MODULE_DEVICE_TABLE(i2c, max9485_i2c_ids); static struct i2c_driver max9485_driver = { .driver = { .name = "max9485", .pm = &max9485_pm_ops, .of_match_table = max9485_dt_ids, }, .probe = max9485_i2c_probe, .id_table = max9485_i2c_ids, }; module_i2c_driver(max9485_driver); MODULE_AUTHOR("Daniel Mack <daniel@zonque.org>"); MODULE_DESCRIPTION("MAX9485 Programmable Audio Clock Generator"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1