Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Joseph Lo | 1536 | 99.81% | 1 | 50.00% |
Thierry Reding | 3 | 0.19% | 1 | 50.00% |
Total | 1539 | 2 |
// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2015-2020, NVIDIA CORPORATION. All rights reserved. */ #include <linux/bitfield.h> #include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/clk/tegra.h> #include <linux/device.h> #include <linux/module.h> #include <linux/io.h> #include <linux/slab.h> #include "clk.h" #define CLK_SOURCE_EMC 0x19c #define CLK_SOURCE_EMC_2X_CLK_SRC GENMASK(31, 29) #define CLK_SOURCE_EMC_MC_EMC_SAME_FREQ BIT(16) #define CLK_SOURCE_EMC_2X_CLK_DIVISOR GENMASK(7, 0) #define CLK_SRC_PLLM 0 #define CLK_SRC_PLLC 1 #define CLK_SRC_PLLP 2 #define CLK_SRC_CLK_M 3 #define CLK_SRC_PLLM_UD 4 #define CLK_SRC_PLLMB_UD 5 #define CLK_SRC_PLLMB 6 #define CLK_SRC_PLLP_UD 7 struct tegra210_clk_emc { struct clk_hw hw; void __iomem *regs; struct tegra210_clk_emc_provider *provider; struct clk *parents[8]; }; static inline struct tegra210_clk_emc * to_tegra210_clk_emc(struct clk_hw *hw) { return container_of(hw, struct tegra210_clk_emc, hw); } static const char *tegra210_clk_emc_parents[] = { "pll_m", "pll_c", "pll_p", "clk_m", "pll_m_ud", "pll_mb_ud", "pll_mb", "pll_p_ud", }; static u8 tegra210_clk_emc_get_parent(struct clk_hw *hw) { struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw); u32 value; u8 src; value = readl_relaxed(emc->regs + CLK_SOURCE_EMC); src = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, value); return src; } static unsigned long tegra210_clk_emc_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw); u32 value, div; /* * CCF assumes that neither the parent nor its rate will change during * ->set_rate(), so the parent rate passed in here was cached from the * parent before the ->set_rate() call. * * This can lead to wrong results being reported for the EMC clock if * the parent and/or parent rate have changed as part of the EMC rate * change sequence. Fix this by overriding the parent clock with what * we know to be the correct value after the rate change. */ parent_rate = clk_hw_get_rate(clk_hw_get_parent(hw)); value = readl_relaxed(emc->regs + CLK_SOURCE_EMC); div = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_DIVISOR, value); div += 2; return DIV_ROUND_UP(parent_rate * 2, div); } static long tegra210_clk_emc_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) { struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw); struct tegra210_clk_emc_provider *provider = emc->provider; unsigned int i; if (!provider || !provider->configs || provider->num_configs == 0) return clk_hw_get_rate(hw); for (i = 0; i < provider->num_configs; i++) { if (provider->configs[i].rate >= rate) return provider->configs[i].rate; } return provider->configs[i - 1].rate; } static struct clk *tegra210_clk_emc_find_parent(struct tegra210_clk_emc *emc, u8 index) { struct clk_hw *parent = clk_hw_get_parent_by_index(&emc->hw, index); const char *name = clk_hw_get_name(parent); /* XXX implement cache? */ return __clk_lookup(name); } static int tegra210_clk_emc_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw); struct tegra210_clk_emc_provider *provider = emc->provider; struct tegra210_clk_emc_config *config; struct device *dev = provider->dev; struct clk_hw *old, *new, *parent; u8 old_idx, new_idx, index; struct clk *clk; unsigned int i; int err; if (!provider || !provider->configs || provider->num_configs == 0) return -EINVAL; for (i = 0; i < provider->num_configs; i++) { if (provider->configs[i].rate >= rate) { config = &provider->configs[i]; break; } } if (i == provider->num_configs) config = &provider->configs[i - 1]; old_idx = tegra210_clk_emc_get_parent(hw); new_idx = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, config->value); old = clk_hw_get_parent_by_index(hw, old_idx); new = clk_hw_get_parent_by_index(hw, new_idx); /* if the rate has changed... */ if (config->parent_rate != clk_hw_get_rate(old)) { /* ... but the clock source remains the same ... */ if (new_idx == old_idx) { /* ... switch to the alternative clock source. */ switch (new_idx) { case CLK_SRC_PLLM: new_idx = CLK_SRC_PLLMB; break; case CLK_SRC_PLLM_UD: new_idx = CLK_SRC_PLLMB_UD; break; case CLK_SRC_PLLMB_UD: new_idx = CLK_SRC_PLLM_UD; break; case CLK_SRC_PLLMB: new_idx = CLK_SRC_PLLM; break; } /* * This should never happen because we can't deal with * it. */ if (WARN_ON(new_idx == old_idx)) return -EINVAL; new = clk_hw_get_parent_by_index(hw, new_idx); } index = new_idx; parent = new; } else { index = old_idx; parent = old; } clk = tegra210_clk_emc_find_parent(emc, index); if (IS_ERR(clk)) { err = PTR_ERR(clk); dev_err(dev, "failed to get parent clock for index %u: %d\n", index, err); return err; } /* set the new parent clock to the required rate */ if (clk_get_rate(clk) != config->parent_rate) { err = clk_set_rate(clk, config->parent_rate); if (err < 0) { dev_err(dev, "failed to set rate %lu Hz for %pC: %d\n", config->parent_rate, clk, err); return err; } } /* enable the new parent clock */ if (parent != old) { err = clk_prepare_enable(clk); if (err < 0) { dev_err(dev, "failed to enable parent clock %pC: %d\n", clk, err); return err; } } /* update the EMC source configuration to reflect the new parent */ config->value &= ~CLK_SOURCE_EMC_2X_CLK_SRC; config->value |= FIELD_PREP(CLK_SOURCE_EMC_2X_CLK_SRC, index); /* * Finally, switch the EMC programming with both old and new parent * clocks enabled. */ err = provider->set_rate(dev, config); if (err < 0) { dev_err(dev, "failed to set EMC rate to %lu Hz: %d\n", rate, err); /* * If we're unable to switch to the new EMC frequency, we no * longer need the new parent to be enabled. */ if (parent != old) clk_disable_unprepare(clk); return err; } /* reparent to new parent clock and disable the old parent clock */ if (parent != old) { clk = tegra210_clk_emc_find_parent(emc, old_idx); if (IS_ERR(clk)) { err = PTR_ERR(clk); dev_err(dev, "failed to get parent clock for index %u: %d\n", old_idx, err); return err; } clk_hw_reparent(hw, parent); clk_disable_unprepare(clk); } return err; } static const struct clk_ops tegra210_clk_emc_ops = { .get_parent = tegra210_clk_emc_get_parent, .recalc_rate = tegra210_clk_emc_recalc_rate, .round_rate = tegra210_clk_emc_round_rate, .set_rate = tegra210_clk_emc_set_rate, }; struct clk *tegra210_clk_register_emc(struct device_node *np, void __iomem *regs) { struct tegra210_clk_emc *emc; struct clk_init_data init; struct clk *clk; emc = kzalloc(sizeof(*emc), GFP_KERNEL); if (!emc) return ERR_PTR(-ENOMEM); emc->regs = regs; init.name = "emc"; init.ops = &tegra210_clk_emc_ops; init.flags = CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE; init.parent_names = tegra210_clk_emc_parents; init.num_parents = ARRAY_SIZE(tegra210_clk_emc_parents); emc->hw.init = &init; clk = clk_register(NULL, &emc->hw); if (IS_ERR(clk)) { kfree(emc); return clk; } return clk; } int tegra210_clk_emc_attach(struct clk *clk, struct tegra210_clk_emc_provider *provider) { struct clk_hw *hw = __clk_get_hw(clk); struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw); struct device *dev = provider->dev; unsigned int i; int err; if (!try_module_get(provider->owner)) return -ENODEV; for (i = 0; i < provider->num_configs; i++) { struct tegra210_clk_emc_config *config = &provider->configs[i]; struct clk_hw *parent; bool same_freq; u8 div, src; div = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_DIVISOR, config->value); src = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, config->value); /* do basic sanity checking on the EMC timings */ if (div & 0x1) { dev_err(dev, "invalid odd divider %u for rate %lu Hz\n", div, config->rate); err = -EINVAL; goto put; } same_freq = config->value & CLK_SOURCE_EMC_MC_EMC_SAME_FREQ; if (same_freq != config->same_freq) { dev_err(dev, "ambiguous EMC to MC ratio for rate %lu Hz\n", config->rate); err = -EINVAL; goto put; } parent = clk_hw_get_parent_by_index(hw, src); config->parent = src; if (src == CLK_SRC_PLLM || src == CLK_SRC_PLLM_UD) { config->parent_rate = config->rate * (1 + div / 2); } else { unsigned long rate = config->rate * (1 + div / 2); config->parent_rate = clk_hw_get_rate(parent); if (config->parent_rate != rate) { dev_err(dev, "rate %lu Hz does not match input\n", config->rate); err = -EINVAL; goto put; } } } emc->provider = provider; return 0; put: module_put(provider->owner); return err; } EXPORT_SYMBOL_GPL(tegra210_clk_emc_attach); void tegra210_clk_emc_detach(struct clk *clk) { struct tegra210_clk_emc *emc = to_tegra210_clk_emc(__clk_get_hw(clk)); module_put(emc->provider->owner); emc->provider = NULL; } EXPORT_SYMBOL_GPL(tegra210_clk_emc_detach);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1