Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Huang Lin | 1853 | 80.71% | 2 | 13.33% |
Enric Balletbò i Serra | 347 | 15.11% | 3 | 20.00% |
Yangtao Li | 40 | 1.74% | 2 | 13.33% |
Viresh Kumar | 29 | 1.26% | 2 | 13.33% |
Marc Zyngier | 15 | 0.65% | 1 | 6.67% |
Javier Martinez Canillas | 7 | 0.30% | 1 | 6.67% |
Chanwoo Choi | 2 | 0.09% | 2 | 13.33% |
Thomas Gleixner | 2 | 0.09% | 1 | 6.67% |
Gaël PORTAY | 1 | 0.04% | 1 | 6.67% |
Total | 2296 | 15 |
// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd. * Author: Lin Huang <hl@rock-chips.com> */ #include <linux/arm-smccc.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/devfreq.h> #include <linux/devfreq-event.h> #include <linux/interrupt.h> #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_opp.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/rwsem.h> #include <linux/suspend.h> #include <soc/rockchip/rk3399_grf.h> #include <soc/rockchip/rockchip_sip.h> struct dram_timing { unsigned int ddr3_speed_bin; unsigned int pd_idle; unsigned int sr_idle; unsigned int sr_mc_gate_idle; unsigned int srpd_lite_idle; unsigned int standby_idle; unsigned int auto_pd_dis_freq; unsigned int dram_dll_dis_freq; unsigned int phy_dll_dis_freq; unsigned int ddr3_odt_dis_freq; unsigned int ddr3_drv; unsigned int ddr3_odt; unsigned int phy_ddr3_ca_drv; unsigned int phy_ddr3_dq_drv; unsigned int phy_ddr3_odt; unsigned int lpddr3_odt_dis_freq; unsigned int lpddr3_drv; unsigned int lpddr3_odt; unsigned int phy_lpddr3_ca_drv; unsigned int phy_lpddr3_dq_drv; unsigned int phy_lpddr3_odt; unsigned int lpddr4_odt_dis_freq; unsigned int lpddr4_drv; unsigned int lpddr4_dq_odt; unsigned int lpddr4_ca_odt; unsigned int phy_lpddr4_ca_drv; unsigned int phy_lpddr4_ck_cs_drv; unsigned int phy_lpddr4_dq_drv; unsigned int phy_lpddr4_odt; }; struct rk3399_dmcfreq { struct device *dev; struct devfreq *devfreq; struct devfreq_simple_ondemand_data ondemand_data; struct clk *dmc_clk; struct devfreq_event_dev *edev; struct mutex lock; struct dram_timing timing; struct regulator *vdd_center; struct regmap *regmap_pmu; unsigned long rate, target_rate; unsigned long volt, target_volt; unsigned int odt_dis_freq; int odt_pd_arg0, odt_pd_arg1; }; static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq, u32 flags) { struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev); struct dev_pm_opp *opp; unsigned long old_clk_rate = dmcfreq->rate; unsigned long target_volt, target_rate; struct arm_smccc_res res; bool odt_enable = false; int err; opp = devfreq_recommended_opp(dev, freq, flags); if (IS_ERR(opp)) return PTR_ERR(opp); target_rate = dev_pm_opp_get_freq(opp); target_volt = dev_pm_opp_get_voltage(opp); dev_pm_opp_put(opp); if (dmcfreq->rate == target_rate) return 0; mutex_lock(&dmcfreq->lock); if (dmcfreq->regmap_pmu) { if (target_rate >= dmcfreq->odt_dis_freq) odt_enable = true; /* * This makes a SMC call to the TF-A to set the DDR PD * (power-down) timings and to enable or disable the * ODT (on-die termination) resistors. */ arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, dmcfreq->odt_pd_arg0, dmcfreq->odt_pd_arg1, ROCKCHIP_SIP_CONFIG_DRAM_SET_ODT_PD, odt_enable, 0, 0, 0, &res); } /* * If frequency scaling from low to high, adjust voltage first. * If frequency scaling from high to low, adjust frequency first. */ if (old_clk_rate < target_rate) { err = regulator_set_voltage(dmcfreq->vdd_center, target_volt, target_volt); if (err) { dev_err(dev, "Cannot set voltage %lu uV\n", target_volt); goto out; } } err = clk_set_rate(dmcfreq->dmc_clk, target_rate); if (err) { dev_err(dev, "Cannot set frequency %lu (%d)\n", target_rate, err); regulator_set_voltage(dmcfreq->vdd_center, dmcfreq->volt, dmcfreq->volt); goto out; } /* * Check the dpll rate, * There only two result we will get, * 1. Ddr frequency scaling fail, we still get the old rate. * 2. Ddr frequency scaling sucessful, we get the rate we set. */ dmcfreq->rate = clk_get_rate(dmcfreq->dmc_clk); /* If get the incorrect rate, set voltage to old value. */ if (dmcfreq->rate != target_rate) { dev_err(dev, "Got wrong frequency, Request %lu, Current %lu\n", target_rate, dmcfreq->rate); regulator_set_voltage(dmcfreq->vdd_center, dmcfreq->volt, dmcfreq->volt); goto out; } else if (old_clk_rate > target_rate) err = regulator_set_voltage(dmcfreq->vdd_center, target_volt, target_volt); if (err) dev_err(dev, "Cannot set voltage %lu uV\n", target_volt); dmcfreq->rate = target_rate; dmcfreq->volt = target_volt; out: mutex_unlock(&dmcfreq->lock); return err; } static int rk3399_dmcfreq_get_dev_status(struct device *dev, struct devfreq_dev_status *stat) { struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev); struct devfreq_event_data edata; int ret = 0; ret = devfreq_event_get_event(dmcfreq->edev, &edata); if (ret < 0) return ret; stat->current_frequency = dmcfreq->rate; stat->busy_time = edata.load_count; stat->total_time = edata.total_count; return ret; } static int rk3399_dmcfreq_get_cur_freq(struct device *dev, unsigned long *freq) { struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev); *freq = dmcfreq->rate; return 0; } static struct devfreq_dev_profile rk3399_devfreq_dmc_profile = { .polling_ms = 200, .target = rk3399_dmcfreq_target, .get_dev_status = rk3399_dmcfreq_get_dev_status, .get_cur_freq = rk3399_dmcfreq_get_cur_freq, }; static __maybe_unused int rk3399_dmcfreq_suspend(struct device *dev) { struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev); int ret = 0; ret = devfreq_event_disable_edev(dmcfreq->edev); if (ret < 0) { dev_err(dev, "failed to disable the devfreq-event devices\n"); return ret; } ret = devfreq_suspend_device(dmcfreq->devfreq); if (ret < 0) { dev_err(dev, "failed to suspend the devfreq devices\n"); return ret; } return 0; } static __maybe_unused int rk3399_dmcfreq_resume(struct device *dev) { struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev); int ret = 0; ret = devfreq_event_enable_edev(dmcfreq->edev); if (ret < 0) { dev_err(dev, "failed to enable the devfreq-event devices\n"); return ret; } ret = devfreq_resume_device(dmcfreq->devfreq); if (ret < 0) { dev_err(dev, "failed to resume the devfreq devices\n"); return ret; } return ret; } static SIMPLE_DEV_PM_OPS(rk3399_dmcfreq_pm, rk3399_dmcfreq_suspend, rk3399_dmcfreq_resume); static int of_get_ddr_timings(struct dram_timing *timing, struct device_node *np) { int ret = 0; ret = of_property_read_u32(np, "rockchip,ddr3_speed_bin", &timing->ddr3_speed_bin); ret |= of_property_read_u32(np, "rockchip,pd_idle", &timing->pd_idle); ret |= of_property_read_u32(np, "rockchip,sr_idle", &timing->sr_idle); ret |= of_property_read_u32(np, "rockchip,sr_mc_gate_idle", &timing->sr_mc_gate_idle); ret |= of_property_read_u32(np, "rockchip,srpd_lite_idle", &timing->srpd_lite_idle); ret |= of_property_read_u32(np, "rockchip,standby_idle", &timing->standby_idle); ret |= of_property_read_u32(np, "rockchip,auto_pd_dis_freq", &timing->auto_pd_dis_freq); ret |= of_property_read_u32(np, "rockchip,dram_dll_dis_freq", &timing->dram_dll_dis_freq); ret |= of_property_read_u32(np, "rockchip,phy_dll_dis_freq", &timing->phy_dll_dis_freq); ret |= of_property_read_u32(np, "rockchip,ddr3_odt_dis_freq", &timing->ddr3_odt_dis_freq); ret |= of_property_read_u32(np, "rockchip,ddr3_drv", &timing->ddr3_drv); ret |= of_property_read_u32(np, "rockchip,ddr3_odt", &timing->ddr3_odt); ret |= of_property_read_u32(np, "rockchip,phy_ddr3_ca_drv", &timing->phy_ddr3_ca_drv); ret |= of_property_read_u32(np, "rockchip,phy_ddr3_dq_drv", &timing->phy_ddr3_dq_drv); ret |= of_property_read_u32(np, "rockchip,phy_ddr3_odt", &timing->phy_ddr3_odt); ret |= of_property_read_u32(np, "rockchip,lpddr3_odt_dis_freq", &timing->lpddr3_odt_dis_freq); ret |= of_property_read_u32(np, "rockchip,lpddr3_drv", &timing->lpddr3_drv); ret |= of_property_read_u32(np, "rockchip,lpddr3_odt", &timing->lpddr3_odt); ret |= of_property_read_u32(np, "rockchip,phy_lpddr3_ca_drv", &timing->phy_lpddr3_ca_drv); ret |= of_property_read_u32(np, "rockchip,phy_lpddr3_dq_drv", &timing->phy_lpddr3_dq_drv); ret |= of_property_read_u32(np, "rockchip,phy_lpddr3_odt", &timing->phy_lpddr3_odt); ret |= of_property_read_u32(np, "rockchip,lpddr4_odt_dis_freq", &timing->lpddr4_odt_dis_freq); ret |= of_property_read_u32(np, "rockchip,lpddr4_drv", &timing->lpddr4_drv); ret |= of_property_read_u32(np, "rockchip,lpddr4_dq_odt", &timing->lpddr4_dq_odt); ret |= of_property_read_u32(np, "rockchip,lpddr4_ca_odt", &timing->lpddr4_ca_odt); ret |= of_property_read_u32(np, "rockchip,phy_lpddr4_ca_drv", &timing->phy_lpddr4_ca_drv); ret |= of_property_read_u32(np, "rockchip,phy_lpddr4_ck_cs_drv", &timing->phy_lpddr4_ck_cs_drv); ret |= of_property_read_u32(np, "rockchip,phy_lpddr4_dq_drv", &timing->phy_lpddr4_dq_drv); ret |= of_property_read_u32(np, "rockchip,phy_lpddr4_odt", &timing->phy_lpddr4_odt); return ret; } static int rk3399_dmcfreq_probe(struct platform_device *pdev) { struct arm_smccc_res res; struct device *dev = &pdev->dev; struct device_node *np = pdev->dev.of_node, *node; struct rk3399_dmcfreq *data; int ret, index, size; uint32_t *timing; struct dev_pm_opp *opp; u32 ddr_type; u32 val; data = devm_kzalloc(dev, sizeof(struct rk3399_dmcfreq), GFP_KERNEL); if (!data) return -ENOMEM; mutex_init(&data->lock); data->vdd_center = devm_regulator_get(dev, "center"); if (IS_ERR(data->vdd_center)) { if (PTR_ERR(data->vdd_center) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_err(dev, "Cannot get the regulator \"center\"\n"); return PTR_ERR(data->vdd_center); } data->dmc_clk = devm_clk_get(dev, "dmc_clk"); if (IS_ERR(data->dmc_clk)) { if (PTR_ERR(data->dmc_clk) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_err(dev, "Cannot get the clk dmc_clk\n"); return PTR_ERR(data->dmc_clk); } data->edev = devfreq_event_get_edev_by_phandle(dev, 0); if (IS_ERR(data->edev)) return -EPROBE_DEFER; ret = devfreq_event_enable_edev(data->edev); if (ret < 0) { dev_err(dev, "failed to enable devfreq-event devices\n"); return ret; } /* * Get dram timing and pass it to arm trust firmware, * the dram driver in arm trust firmware will get these * timing and to do dram initial. */ if (!of_get_ddr_timings(&data->timing, np)) { timing = &data->timing.ddr3_speed_bin; size = sizeof(struct dram_timing) / 4; for (index = 0; index < size; index++) { arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, *timing++, index, ROCKCHIP_SIP_CONFIG_DRAM_SET_PARAM, 0, 0, 0, 0, &res); if (res.a0) { dev_err(dev, "Failed to set dram param: %ld\n", res.a0); ret = -EINVAL; goto err_edev; } } } node = of_parse_phandle(np, "rockchip,pmu", 0); if (!node) goto no_pmu; data->regmap_pmu = syscon_node_to_regmap(node); of_node_put(node); if (IS_ERR(data->regmap_pmu)) { ret = PTR_ERR(data->regmap_pmu); goto err_edev; } regmap_read(data->regmap_pmu, RK3399_PMUGRF_OS_REG2, &val); ddr_type = (val >> RK3399_PMUGRF_DDRTYPE_SHIFT) & RK3399_PMUGRF_DDRTYPE_MASK; switch (ddr_type) { case RK3399_PMUGRF_DDRTYPE_DDR3: data->odt_dis_freq = data->timing.ddr3_odt_dis_freq; break; case RK3399_PMUGRF_DDRTYPE_LPDDR3: data->odt_dis_freq = data->timing.lpddr3_odt_dis_freq; break; case RK3399_PMUGRF_DDRTYPE_LPDDR4: data->odt_dis_freq = data->timing.lpddr4_odt_dis_freq; break; default: ret = -EINVAL; goto err_edev; }; no_pmu: arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, 0, 0, ROCKCHIP_SIP_CONFIG_DRAM_INIT, 0, 0, 0, 0, &res); /* * In TF-A there is a platform SIP call to set the PD (power-down) * timings and to enable or disable the ODT (on-die termination). * This call needs three arguments as follows: * * arg0: * bit[0-7] : sr_idle * bit[8-15] : sr_mc_gate_idle * bit[16-31] : standby idle * arg1: * bit[0-11] : pd_idle * bit[16-27] : srpd_lite_idle * arg2: * bit[0] : odt enable */ data->odt_pd_arg0 = (data->timing.sr_idle & 0xff) | ((data->timing.sr_mc_gate_idle & 0xff) << 8) | ((data->timing.standby_idle & 0xffff) << 16); data->odt_pd_arg1 = (data->timing.pd_idle & 0xfff) | ((data->timing.srpd_lite_idle & 0xfff) << 16); /* * We add a devfreq driver to our parent since it has a device tree node * with operating points. */ if (dev_pm_opp_of_add_table(dev)) { dev_err(dev, "Invalid operating-points in device tree.\n"); ret = -EINVAL; goto err_edev; } of_property_read_u32(np, "upthreshold", &data->ondemand_data.upthreshold); of_property_read_u32(np, "downdifferential", &data->ondemand_data.downdifferential); data->rate = clk_get_rate(data->dmc_clk); opp = devfreq_recommended_opp(dev, &data->rate, 0); if (IS_ERR(opp)) { ret = PTR_ERR(opp); goto err_free_opp; } data->rate = dev_pm_opp_get_freq(opp); data->volt = dev_pm_opp_get_voltage(opp); dev_pm_opp_put(opp); rk3399_devfreq_dmc_profile.initial_freq = data->rate; data->devfreq = devm_devfreq_add_device(dev, &rk3399_devfreq_dmc_profile, DEVFREQ_GOV_SIMPLE_ONDEMAND, &data->ondemand_data); if (IS_ERR(data->devfreq)) { ret = PTR_ERR(data->devfreq); goto err_free_opp; } devm_devfreq_register_opp_notifier(dev, data->devfreq); data->dev = dev; platform_set_drvdata(pdev, data); return 0; err_free_opp: dev_pm_opp_of_remove_table(&pdev->dev); err_edev: devfreq_event_disable_edev(data->edev); return ret; } static int rk3399_dmcfreq_remove(struct platform_device *pdev) { struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(&pdev->dev); /* * Before remove the opp table we need to unregister the opp notifier. */ devm_devfreq_unregister_opp_notifier(dmcfreq->dev, dmcfreq->devfreq); dev_pm_opp_of_remove_table(dmcfreq->dev); return 0; } static const struct of_device_id rk3399dmc_devfreq_of_match[] = { { .compatible = "rockchip,rk3399-dmc" }, { }, }; MODULE_DEVICE_TABLE(of, rk3399dmc_devfreq_of_match); static struct platform_driver rk3399_dmcfreq_driver = { .probe = rk3399_dmcfreq_probe, .remove = rk3399_dmcfreq_remove, .driver = { .name = "rk3399-dmc-freq", .pm = &rk3399_dmcfreq_pm, .of_match_table = rk3399dmc_devfreq_of_match, }, }; module_platform_driver(rk3399_dmcfreq_driver); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Lin Huang <hl@rock-chips.com>"); MODULE_DESCRIPTION("RK3399 dmcfreq driver with devfreq framework");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1