Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Eric Yang | 984 | 98.30% | 2 | 40.00% |
Nicholas Kazlauskas | 7 | 0.70% | 1 | 20.00% |
Anthony Koo | 6 | 0.60% | 1 | 20.00% |
Dmytro Laktyushkin | 4 | 0.40% | 1 | 20.00% |
Total | 1001 | 5 |
/* * Copyright 2012-16 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * * Authors: AMD * */ #include "core_types.h" #include "clk_mgr_internal.h" #include "dce/dce_11_2_d.h" #include "dce/dce_11_2_sh_mask.h" #include "dce100/dce_clk_mgr.h" #include "dce110/dce110_clk_mgr.h" #include "dce112_clk_mgr.h" #include "dal_asic_id.h" /* set register offset */ #define SR(reg_name)\ .reg_name = mm ## reg_name /* set register offset with instance */ #define SRI(reg_name, block, id)\ .reg_name = mm ## block ## id ## _ ## reg_name static const struct clk_mgr_registers disp_clk_regs = { CLK_COMMON_REG_LIST_DCE_BASE() }; static const struct clk_mgr_shift disp_clk_shift = { CLK_COMMON_MASK_SH_LIST_DCE_COMMON_BASE(__SHIFT) }; static const struct clk_mgr_mask disp_clk_mask = { CLK_COMMON_MASK_SH_LIST_DCE_COMMON_BASE(_MASK) }; static const struct state_dependent_clocks dce112_max_clks_by_state[] = { /*ClocksStateInvalid - should not be used*/ { .display_clk_khz = 0, .pixel_clk_khz = 0 }, /*ClocksStateUltraLow - currently by HW design team not supposed to be used*/ { .display_clk_khz = 389189, .pixel_clk_khz = 346672 }, /*ClocksStateLow*/ { .display_clk_khz = 459000, .pixel_clk_khz = 400000 }, /*ClocksStateNominal*/ { .display_clk_khz = 667000, .pixel_clk_khz = 600000 }, /*ClocksStatePerformance*/ { .display_clk_khz = 1132000, .pixel_clk_khz = 600000 } }; //TODO: remove use the two broken down functions int dce112_set_clock(struct clk_mgr *clk_mgr_base, int requested_clk_khz) { struct clk_mgr_internal *clk_mgr_dce = TO_CLK_MGR_INTERNAL(clk_mgr_base); struct bp_set_dce_clock_parameters dce_clk_params; struct dc_bios *bp = clk_mgr_base->ctx->dc_bios; struct dc *dc = clk_mgr_base->ctx->dc; struct dmcu *dmcu = dc->res_pool->dmcu; int actual_clock = requested_clk_khz; /* Prepare to program display clock*/ memset(&dce_clk_params, 0, sizeof(dce_clk_params)); /* Make sure requested clock isn't lower than minimum threshold*/ if (requested_clk_khz > 0) requested_clk_khz = max(requested_clk_khz, clk_mgr_dce->base.dentist_vco_freq_khz / 62); dce_clk_params.target_clock_frequency = requested_clk_khz; dce_clk_params.pll_id = CLOCK_SOURCE_ID_DFS; dce_clk_params.clock_type = DCECLOCK_TYPE_DISPLAY_CLOCK; bp->funcs->set_dce_clock(bp, &dce_clk_params); actual_clock = dce_clk_params.target_clock_frequency; /* * from power down, we need mark the clock state as ClocksStateNominal * from HWReset, so when resume we will call pplib voltage regulator. */ if (requested_clk_khz == 0) clk_mgr_dce->cur_min_clks_state = DM_PP_CLOCKS_STATE_NOMINAL; /*Program DP ref Clock*/ /*VBIOS will determine DPREFCLK frequency, so we don't set it*/ dce_clk_params.target_clock_frequency = 0; dce_clk_params.clock_type = DCECLOCK_TYPE_DPREFCLK; if (!ASICREV_IS_VEGA20_P(clk_mgr_base->ctx->asic_id.hw_internal_rev)) dce_clk_params.flags.USE_GENLOCK_AS_SOURCE_FOR_DPREFCLK = (dce_clk_params.pll_id == CLOCK_SOURCE_COMBO_DISPLAY_PLL0); else dce_clk_params.flags.USE_GENLOCK_AS_SOURCE_FOR_DPREFCLK = false; bp->funcs->set_dce_clock(bp, &dce_clk_params); if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) { if (dmcu && dmcu->funcs->is_dmcu_initialized(dmcu)) { if (clk_mgr_dce->dfs_bypass_disp_clk != actual_clock) dmcu->funcs->set_psr_wait_loop(dmcu, actual_clock / 1000 / 7); } } clk_mgr_dce->dfs_bypass_disp_clk = actual_clock; return actual_clock; } int dce112_set_dispclk(struct clk_mgr_internal *clk_mgr, int requested_clk_khz) { struct bp_set_dce_clock_parameters dce_clk_params; struct dc_bios *bp = clk_mgr->base.ctx->dc_bios; struct dc *dc = clk_mgr->base.ctx->dc; struct dmcu *dmcu = dc->res_pool->dmcu; int actual_clock = requested_clk_khz; /* Prepare to program display clock*/ memset(&dce_clk_params, 0, sizeof(dce_clk_params)); /* Make sure requested clock isn't lower than minimum threshold*/ if (requested_clk_khz > 0) requested_clk_khz = max(requested_clk_khz, clk_mgr->base.dentist_vco_freq_khz / 62); dce_clk_params.target_clock_frequency = requested_clk_khz; dce_clk_params.pll_id = CLOCK_SOURCE_ID_DFS; dce_clk_params.clock_type = DCECLOCK_TYPE_DISPLAY_CLOCK; bp->funcs->set_dce_clock(bp, &dce_clk_params); actual_clock = dce_clk_params.target_clock_frequency; /* * from power down, we need mark the clock state as ClocksStateNominal * from HWReset, so when resume we will call pplib voltage regulator. */ if (requested_clk_khz == 0) clk_mgr->cur_min_clks_state = DM_PP_CLOCKS_STATE_NOMINAL; if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) { if (dmcu && dmcu->funcs->is_dmcu_initialized(dmcu)) { if (clk_mgr->dfs_bypass_disp_clk != actual_clock) dmcu->funcs->set_psr_wait_loop(dmcu, actual_clock / 1000 / 7); } } clk_mgr->dfs_bypass_disp_clk = actual_clock; return actual_clock; } int dce112_set_dprefclk(struct clk_mgr_internal *clk_mgr) { struct bp_set_dce_clock_parameters dce_clk_params; struct dc_bios *bp = clk_mgr->base.ctx->dc_bios; memset(&dce_clk_params, 0, sizeof(dce_clk_params)); /*Program DP ref Clock*/ /*VBIOS will determine DPREFCLK frequency, so we don't set it*/ dce_clk_params.target_clock_frequency = 0; dce_clk_params.pll_id = CLOCK_SOURCE_ID_DFS; dce_clk_params.clock_type = DCECLOCK_TYPE_DPREFCLK; if (!ASICREV_IS_VEGA20_P(clk_mgr->base.ctx->asic_id.hw_internal_rev)) dce_clk_params.flags.USE_GENLOCK_AS_SOURCE_FOR_DPREFCLK = (dce_clk_params.pll_id == CLOCK_SOURCE_COMBO_DISPLAY_PLL0); else dce_clk_params.flags.USE_GENLOCK_AS_SOURCE_FOR_DPREFCLK = false; bp->funcs->set_dce_clock(bp, &dce_clk_params); /* Returns the dp_refclk that was set */ return dce_clk_params.target_clock_frequency; } static void dce112_update_clocks(struct clk_mgr *clk_mgr_base, struct dc_state *context, bool safe_to_lower) { struct clk_mgr_internal *clk_mgr_dce = TO_CLK_MGR_INTERNAL(clk_mgr_base); struct dm_pp_power_level_change_request level_change_req; int patched_disp_clk = context->bw_ctx.bw.dce.dispclk_khz; /*TODO: W/A for dal3 linux, investigate why this works */ if (!clk_mgr_dce->dfs_bypass_active) patched_disp_clk = patched_disp_clk * 115 / 100; level_change_req.power_level = dce_get_required_clocks_state(clk_mgr_base, context); /* get max clock state from PPLIB */ if ((level_change_req.power_level < clk_mgr_dce->cur_min_clks_state && safe_to_lower) || level_change_req.power_level > clk_mgr_dce->cur_min_clks_state) { if (dm_pp_apply_power_level_change_request(clk_mgr_base->ctx, &level_change_req)) clk_mgr_dce->cur_min_clks_state = level_change_req.power_level; } if (should_set_clock(safe_to_lower, patched_disp_clk, clk_mgr_base->clks.dispclk_khz)) { patched_disp_clk = dce112_set_clock(clk_mgr_base, patched_disp_clk); clk_mgr_base->clks.dispclk_khz = patched_disp_clk; } dce11_pplib_apply_display_requirements(clk_mgr_base->ctx->dc, context); } static struct clk_mgr_funcs dce112_funcs = { .get_dp_ref_clk_frequency = dce_get_dp_ref_freq_khz, .update_clocks = dce112_update_clocks }; void dce112_clk_mgr_construct( struct dc_context *ctx, struct clk_mgr_internal *clk_mgr) { dce_clk_mgr_construct(ctx, clk_mgr); memcpy(clk_mgr->max_clks_by_state, dce112_max_clks_by_state, sizeof(dce112_max_clks_by_state)); clk_mgr->regs = &disp_clk_regs; clk_mgr->clk_mgr_shift = &disp_clk_shift; clk_mgr->clk_mgr_mask = &disp_clk_mask; clk_mgr->base.funcs = &dce112_funcs; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1