| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Huang Rui | 3059 | 96.96% | 4 | 36.36% |
| tianci yin | 62 | 1.97% | 3 | 27.27% |
| Kenneth Feng | 16 | 0.51% | 1 | 9.09% |
| Jack Xiao | 13 | 0.41% | 1 | 9.09% |
| Evan Quan | 4 | 0.13% | 1 | 9.09% |
| Alex Deucher | 1 | 0.03% | 1 | 9.09% |
| Total | 3155 | 11 |
/* * Copyright 2019 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * */ #ifndef __SMU11_DRIVER_IF_NAVI10_H__ #define __SMU11_DRIVER_IF_NAVI10_H__ // *** IMPORTANT *** // SMU TEAM: Always increment the interface version if // any structure is changed in this file // Be aware of that the version should be updated in // smu_v11_0.h, maybe rename is also needed. // #define SMU11_DRIVER_IF_VERSION 0x33 #define PPTABLE_NV10_SMU_VERSION 8 #define NUM_GFXCLK_DPM_LEVELS 16 #define NUM_SMNCLK_DPM_LEVELS 2 #define NUM_SOCCLK_DPM_LEVELS 8 #define NUM_MP0CLK_DPM_LEVELS 2 #define NUM_DCLK_DPM_LEVELS 8 #define NUM_VCLK_DPM_LEVELS 8 #define NUM_DCEFCLK_DPM_LEVELS 8 #define NUM_PHYCLK_DPM_LEVELS 8 #define NUM_DISPCLK_DPM_LEVELS 8 #define NUM_PIXCLK_DPM_LEVELS 8 #define NUM_UCLK_DPM_LEVELS 4 #define NUM_MP1CLK_DPM_LEVELS 2 #define NUM_LINK_LEVELS 2 #define MAX_GFXCLK_DPM_LEVEL (NUM_GFXCLK_DPM_LEVELS - 1) #define MAX_SMNCLK_DPM_LEVEL (NUM_SMNCLK_DPM_LEVELS - 1) #define MAX_SOCCLK_DPM_LEVEL (NUM_SOCCLK_DPM_LEVELS - 1) #define MAX_MP0CLK_DPM_LEVEL (NUM_MP0CLK_DPM_LEVELS - 1) #define MAX_DCLK_DPM_LEVEL (NUM_DCLK_DPM_LEVELS - 1) #define MAX_VCLK_DPM_LEVEL (NUM_VCLK_DPM_LEVELS - 1) #define MAX_DCEFCLK_DPM_LEVEL (NUM_DCEFCLK_DPM_LEVELS - 1) #define MAX_DISPCLK_DPM_LEVEL (NUM_DISPCLK_DPM_LEVELS - 1) #define MAX_PIXCLK_DPM_LEVEL (NUM_PIXCLK_DPM_LEVELS - 1) #define MAX_PHYCLK_DPM_LEVEL (NUM_PHYCLK_DPM_LEVELS - 1) #define MAX_UCLK_DPM_LEVEL (NUM_UCLK_DPM_LEVELS - 1) #define MAX_MP1CLK_DPM_LEVEL (NUM_MP1CLK_DPM_LEVELS - 1) #define MAX_LINK_LEVEL (NUM_LINK_LEVELS - 1) //Gemini Modes #define PPSMC_GeminiModeNone 0 //Single GPU board #define PPSMC_GeminiModeMaster 1 //Master GPU on a Gemini board #define PPSMC_GeminiModeSlave 2 //Slave GPU on a Gemini board // Feature Control Defines // DPM #define FEATURE_DPM_PREFETCHER_BIT 0 #define FEATURE_DPM_GFXCLK_BIT 1 #define FEATURE_DPM_GFX_PACE_BIT 2 #define FEATURE_DPM_UCLK_BIT 3 #define FEATURE_DPM_SOCCLK_BIT 4 #define FEATURE_DPM_MP0CLK_BIT 5 #define FEATURE_DPM_LINK_BIT 6 #define FEATURE_DPM_DCEFCLK_BIT 7 #define FEATURE_MEM_VDDCI_SCALING_BIT 8 #define FEATURE_MEM_MVDD_SCALING_BIT 9 //Idle #define FEATURE_DS_GFXCLK_BIT 10 #define FEATURE_DS_SOCCLK_BIT 11 #define FEATURE_DS_LCLK_BIT 12 #define FEATURE_DS_DCEFCLK_BIT 13 #define FEATURE_DS_UCLK_BIT 14 #define FEATURE_GFX_ULV_BIT 15 #define FEATURE_FW_DSTATE_BIT 16 #define FEATURE_GFXOFF_BIT 17 #define FEATURE_BACO_BIT 18 #define FEATURE_VCN_PG_BIT 19 #define FEATURE_JPEG_PG_BIT 20 #define FEATURE_USB_PG_BIT 21 #define FEATURE_RSMU_SMN_CG_BIT 22 //Throttler/Response #define FEATURE_PPT_BIT 23 #define FEATURE_TDC_BIT 24 #define FEATURE_GFX_EDC_BIT 25 #define FEATURE_APCC_PLUS_BIT 26 #define FEATURE_GTHR_BIT 27 #define FEATURE_ACDC_BIT 28 #define FEATURE_VR0HOT_BIT 29 #define FEATURE_VR1HOT_BIT 30 #define FEATURE_FW_CTF_BIT 31 #define FEATURE_FAN_CONTROL_BIT 32 #define FEATURE_THERMAL_BIT 33 #define FEATURE_GFX_DCS_BIT 34 //VF #define FEATURE_RM_BIT 35 #define FEATURE_LED_DISPLAY_BIT 36 //Other #define FEATURE_GFX_SS_BIT 37 #define FEATURE_OUT_OF_BAND_MONITOR_BIT 38 #define FEATURE_TEMP_DEPENDENT_VMIN_BIT 39 #define FEATURE_MMHUB_PG_BIT 40 #define FEATURE_ATHUB_PG_BIT 41 #define FEATURE_APCC_DFLL_BIT 42 #define FEATURE_SPARE_43_BIT 43 #define FEATURE_SPARE_44_BIT 44 #define FEATURE_SPARE_45_BIT 45 #define FEATURE_SPARE_46_BIT 46 #define FEATURE_SPARE_47_BIT 47 #define FEATURE_SPARE_48_BIT 48 #define FEATURE_SPARE_49_BIT 49 #define FEATURE_SPARE_50_BIT 50 #define FEATURE_SPARE_51_BIT 51 #define FEATURE_SPARE_52_BIT 52 #define FEATURE_SPARE_53_BIT 53 #define FEATURE_SPARE_54_BIT 54 #define FEATURE_SPARE_55_BIT 55 #define FEATURE_SPARE_56_BIT 56 #define FEATURE_SPARE_57_BIT 57 #define FEATURE_SPARE_58_BIT 58 #define FEATURE_SPARE_59_BIT 59 #define FEATURE_SPARE_60_BIT 60 #define FEATURE_SPARE_61_BIT 61 #define FEATURE_SPARE_62_BIT 62 #define FEATURE_SPARE_63_BIT 63 #define NUM_FEATURES 64 // Debug Overrides Bitmask #define DPM_OVERRIDE_DISABLE_SOCCLK_PID 0x00000001 #define DPM_OVERRIDE_DISABLE_UCLK_PID 0x00000002 #define DPM_OVERRIDE_DISABLE_VOLT_LINK_VCN_SOCCLK 0x00000004 #define DPM_OVERRIDE_ENABLE_FREQ_LINK_VCLK_SOCCLK 0x00000008 #define DPM_OVERRIDE_ENABLE_FREQ_LINK_DCLK_SOCCLK 0x00000010 #define DPM_OVERRIDE_ENABLE_FREQ_LINK_GFXCLK_SOCCLK 0x00000020 #define DPM_OVERRIDE_ENABLE_FREQ_LINK_GFXCLK_UCLK 0x00000040 #define DPM_OVERRIDE_DISABLE_VOLT_LINK_DCE_SOCCLK 0x00000080 #define DPM_OVERRIDE_DISABLE_VOLT_LINK_MP0_SOCCLK 0x00000100 #define DPM_OVERRIDE_DISABLE_DFLL_PLL_SHUTDOWN 0x00000200 #define DPM_OVERRIDE_DISABLE_MEMORY_TEMPERATURE_READ 0x00000400 // VR Mapping Bit Defines #define VR_MAPPING_VR_SELECT_MASK 0x01 #define VR_MAPPING_VR_SELECT_SHIFT 0x00 #define VR_MAPPING_PLANE_SELECT_MASK 0x02 #define VR_MAPPING_PLANE_SELECT_SHIFT 0x01 // PSI Bit Defines #define PSI_SEL_VR0_PLANE0_PSI0 0x01 #define PSI_SEL_VR0_PLANE0_PSI1 0x02 #define PSI_SEL_VR0_PLANE1_PSI0 0x04 #define PSI_SEL_VR0_PLANE1_PSI1 0x08 #define PSI_SEL_VR1_PLANE0_PSI0 0x10 #define PSI_SEL_VR1_PLANE0_PSI1 0x20 #define PSI_SEL_VR1_PLANE1_PSI0 0x40 #define PSI_SEL_VR1_PLANE1_PSI1 0x80 // Throttler Control/Status Bits #define THROTTLER_PADDING_BIT 0 #define THROTTLER_TEMP_EDGE_BIT 1 #define THROTTLER_TEMP_HOTSPOT_BIT 2 #define THROTTLER_TEMP_MEM_BIT 3 #define THROTTLER_TEMP_VR_GFX_BIT 4 #define THROTTLER_TEMP_VR_MEM0_BIT 5 #define THROTTLER_TEMP_VR_MEM1_BIT 6 #define THROTTLER_TEMP_VR_SOC_BIT 7 #define THROTTLER_TEMP_LIQUID0_BIT 8 #define THROTTLER_TEMP_LIQUID1_BIT 9 #define THROTTLER_TEMP_PLX_BIT 10 #define THROTTLER_TEMP_SKIN_BIT 11 #define THROTTLER_TDC_GFX_BIT 12 #define THROTTLER_TDC_SOC_BIT 13 #define THROTTLER_PPT0_BIT 14 #define THROTTLER_PPT1_BIT 15 #define THROTTLER_PPT2_BIT 16 #define THROTTLER_PPT3_BIT 17 #define THROTTLER_FIT_BIT 18 #define THROTTLER_PPM_BIT 19 #define THROTTLER_APCC_BIT 20 // FW DState Features Control Bits #define FW_DSTATE_SOC_ULV_BIT 0 #define FW_DSTATE_G6_HSR_BIT 1 #define FW_DSTATE_G6_PHY_VDDCI_OFF_BIT 2 #define FW_DSTATE_MP0_DS_BIT 3 #define FW_DSTATE_SMN_DS_BIT 4 #define FW_DSTATE_MP1_DS_BIT 5 #define FW_DSTATE_MP1_WHISPER_MODE_BIT 6 #define FW_DSTATE_LIV_MIN_BIT 7 #define FW_DSTATE_SOC_PLL_PWRDN_BIT 8 #define FW_DSTATE_SOC_ULV_MASK (1 << FW_DSTATE_SOC_ULV_BIT ) #define FW_DSTATE_G6_HSR_MASK (1 << FW_DSTATE_G6_HSR_BIT ) #define FW_DSTATE_G6_PHY_VDDCI_OFF_MASK (1 << FW_DSTATE_G6_PHY_VDDCI_OFF_BIT ) #define FW_DSTATE_MP1_DS_MASK (1 << FW_DSTATE_MP1_DS_BIT ) #define FW_DSTATE_MP0_DS_MASK (1 << FW_DSTATE_MP0_DS_BIT ) #define FW_DSTATE_SMN_DS_MASK (1 << FW_DSTATE_SMN_DS_BIT ) #define FW_DSTATE_MP1_WHISPER_MODE_MASK (1 << FW_DSTATE_MP1_WHISPER_MODE_BIT ) #define FW_DSTATE_LIV_MIN_MASK (1 << FW_DSTATE_LIV_MIN_BIT ) #define FW_DSTATE_SOC_PLL_PWRDN_MASK (1 << FW_DSTATE_SOC_PLL_PWRDN_BIT ) //I2C Interface #define NUM_I2C_CONTROLLERS 8 #define I2C_CONTROLLER_ENABLED 1 #define I2C_CONTROLLER_DISABLED 0 #define MAX_SW_I2C_COMMANDS 8 typedef enum { I2C_CONTROLLER_PORT_0 = 0, //CKSVII2C0 I2C_CONTROLLER_PORT_1 = 1, //CKSVII2C1 I2C_CONTROLLER_PORT_COUNT, } I2cControllerPort_e; typedef enum { I2C_CONTROLLER_NAME_VR_GFX = 0, I2C_CONTROLLER_NAME_VR_SOC, I2C_CONTROLLER_NAME_VR_VDDCI, I2C_CONTROLLER_NAME_VR_MVDD, I2C_CONTROLLER_NAME_LIQUID0, I2C_CONTROLLER_NAME_LIQUID1, I2C_CONTROLLER_NAME_PLX, I2C_CONTROLLER_NAME_SPARE, I2C_CONTROLLER_NAME_COUNT, } I2cControllerName_e; typedef enum { I2C_CONTROLLER_THROTTLER_TYPE_NONE = 0, I2C_CONTROLLER_THROTTLER_VR_GFX, I2C_CONTROLLER_THROTTLER_VR_SOC, I2C_CONTROLLER_THROTTLER_VR_VDDCI, I2C_CONTROLLER_THROTTLER_VR_MVDD, I2C_CONTROLLER_THROTTLER_LIQUID0, I2C_CONTROLLER_THROTTLER_LIQUID1, I2C_CONTROLLER_THROTTLER_PLX, I2C_CONTROLLER_THROTTLER_COUNT, } I2cControllerThrottler_e; typedef enum { I2C_CONTROLLER_PROTOCOL_VR_0, I2C_CONTROLLER_PROTOCOL_VR_1, I2C_CONTROLLER_PROTOCOL_TMP_0, I2C_CONTROLLER_PROTOCOL_TMP_1, I2C_CONTROLLER_PROTOCOL_SPARE_0, I2C_CONTROLLER_PROTOCOL_SPARE_1, I2C_CONTROLLER_PROTOCOL_COUNT, } I2cControllerProtocol_e; typedef struct { uint8_t Enabled; uint8_t Speed; uint8_t Padding[2]; uint32_t SlaveAddress; uint8_t ControllerPort; uint8_t ControllerName; uint8_t ThermalThrotter; uint8_t I2cProtocol; } I2cControllerConfig_t; typedef enum { I2C_PORT_SVD_SCL = 0, I2C_PORT_GPIO, } I2cPort_e; typedef enum { I2C_SPEED_FAST_50K = 0, //50 Kbits/s I2C_SPEED_FAST_100K, //100 Kbits/s I2C_SPEED_FAST_400K, //400 Kbits/s I2C_SPEED_FAST_PLUS_1M, //1 Mbits/s (in fast mode) I2C_SPEED_HIGH_1M, //1 Mbits/s (in high speed mode) I2C_SPEED_HIGH_2M, //2.3 Mbits/s I2C_SPEED_COUNT, } I2cSpeed_e; typedef enum { I2C_CMD_READ = 0, I2C_CMD_WRITE, I2C_CMD_COUNT, } I2cCmdType_e; #define CMDCONFIG_STOP_BIT 0 #define CMDCONFIG_RESTART_BIT 1 #define CMDCONFIG_STOP_MASK (1 << CMDCONFIG_STOP_BIT) #define CMDCONFIG_RESTART_MASK (1 << CMDCONFIG_RESTART_BIT) typedef struct { uint8_t RegisterAddr; ////only valid for write, ignored for read uint8_t Cmd; //Read(0) or Write(1) uint8_t Data; //Return data for read. Data to send for write uint8_t CmdConfig; //Includes whether associated command should have a stop or restart command } SwI2cCmd_t; //SW I2C Command Table typedef struct { uint8_t I2CcontrollerPort; //CKSVII2C0(0) or //CKSVII2C1(1) uint8_t I2CSpeed; //Slow(0) or Fast(1) uint16_t SlaveAddress; uint8_t NumCmds; //Number of commands uint8_t Padding[3]; SwI2cCmd_t SwI2cCmds[MAX_SW_I2C_COMMANDS]; uint32_t MmHubPadding[8]; // SMU internal use } SwI2cRequest_t; // SW I2C Request Table //D3HOT sequences typedef enum { BACO_SEQUENCE, MSR_SEQUENCE, BAMACO_SEQUENCE, ULPS_SEQUENCE, D3HOT_SEQUENCE_COUNT, }D3HOTSequence_e; //THis is aligned with RSMU PGFSM Register Mapping typedef enum { PG_DYNAMIC_MODE = 0, PG_STATIC_MODE, } PowerGatingMode_e; //This is aligned with RSMU PGFSM Register Mapping typedef enum { PG_POWER_DOWN = 0, PG_POWER_UP, } PowerGatingSettings_e; typedef struct { uint32_t a; // store in IEEE float format in this variable uint32_t b; // store in IEEE float format in this variable uint32_t c; // store in IEEE float format in this variable } QuadraticInt_t; typedef struct { uint32_t m; // store in IEEE float format in this variable uint32_t b; // store in IEEE float format in this variable } LinearInt_t; typedef struct { uint32_t a; // store in IEEE float format in this variable uint32_t b; // store in IEEE float format in this variable uint32_t c; // store in IEEE float format in this variable } DroopInt_t; typedef enum { GFXCLK_SOURCE_PLL = 0, GFXCLK_SOURCE_DFLL, GFXCLK_SOURCE_COUNT, } GfxclkSrc_e; //Only Clks that have DPM descriptors are listed here typedef enum { PPCLK_GFXCLK = 0, PPCLK_SOCCLK, PPCLK_UCLK, PPCLK_DCLK, PPCLK_VCLK, PPCLK_DCEFCLK, PPCLK_DISPCLK, PPCLK_PIXCLK, PPCLK_PHYCLK, PPCLK_COUNT, } PPCLK_e; typedef enum { POWER_SOURCE_AC, POWER_SOURCE_DC, POWER_SOURCE_COUNT, } POWER_SOURCE_e; typedef enum { PPT_THROTTLER_PPT0, PPT_THROTTLER_PPT1, PPT_THROTTLER_PPT2, PPT_THROTTLER_PPT3, PPT_THROTTLER_COUNT } PPT_THROTTLER_e; typedef enum { VOLTAGE_MODE_AVFS = 0, VOLTAGE_MODE_AVFS_SS, VOLTAGE_MODE_SS, VOLTAGE_MODE_COUNT, } VOLTAGE_MODE_e; typedef enum { AVFS_VOLTAGE_GFX = 0, AVFS_VOLTAGE_SOC, AVFS_VOLTAGE_COUNT, } AVFS_VOLTAGE_TYPE_e; typedef enum { UCLK_DIV_BY_1 = 0, UCLK_DIV_BY_2, UCLK_DIV_BY_4, UCLK_DIV_BY_8, } UCLK_DIV_e; typedef enum { GPIO_INT_POLARITY_ACTIVE_LOW = 0, GPIO_INT_POLARITY_ACTIVE_HIGH, } GpioIntPolarity_e; typedef enum { MEMORY_TYPE_GDDR6 = 0, MEMORY_TYPE_HBM, } MemoryType_e; typedef enum { PWR_CONFIG_TDP = 0, PWR_CONFIG_TGP, PWR_CONFIG_TCP_ESTIMATED, PWR_CONFIG_TCP_MEASURED, } PwrConfig_e; typedef struct { uint8_t VoltageMode; // 0 - AVFS only, 1- min(AVFS,SS), 2-SS only uint8_t SnapToDiscrete; // 0 - Fine grained DPM, 1 - Discrete DPM uint8_t NumDiscreteLevels; // Set to 2 (Fmin, Fmax) when using fine grained DPM, otherwise set to # discrete levels used uint8_t Padding; LinearInt_t ConversionToAvfsClk; // Transfer function to AVFS Clock (GHz->GHz) QuadraticInt_t SsCurve; // Slow-slow curve (GHz->V) } DpmDescriptor_t; typedef enum { TEMP_EDGE, TEMP_HOTSPOT, TEMP_MEM, TEMP_VR_GFX, TEMP_VR_MEM0, TEMP_VR_MEM1, TEMP_VR_SOC, TEMP_LIQUID0, TEMP_LIQUID1, TEMP_PLX, TEMP_COUNT } TEMP_e; //Out of band monitor status defines //see SPEC //gpu/doc/soc_arch/spec/feature/SMBUS/SMBUS.xlsx #define POWER_MANAGER_CONTROLLER_NOT_RUNNING 0 #define POWER_MANAGER_CONTROLLER_RUNNING 1 #define POWER_MANAGER_CONTROLLER_BIT 0 #define MAXIMUM_DPM_STATE_GFX_ENGINE_RESTRICTED_BIT 8 #define GPU_DIE_TEMPERATURE_THROTTLING_BIT 9 #define HBM_DIE_TEMPERATURE_THROTTLING_BIT 10 #define TGP_THROTTLING_BIT 11 #define PCC_THROTTLING_BIT 12 #define HBM_TEMPERATURE_EXCEEDING_TEMPERATURE_LIMIT_BIT 13 #define HBM_TEMPERATURE_EXCEEDING_MAX_MEMORY_TEMPERATURE_BIT 14 #define POWER_MANAGER_CONTROLLER_MASK (1 << POWER_MANAGER_CONTROLLER_BIT ) #define MAXIMUM_DPM_STATE_GFX_ENGINE_RESTRICTED_MASK (1 << MAXIMUM_DPM_STATE_GFX_ENGINE_RESTRICTED_BIT ) #define GPU_DIE_TEMPERATURE_THROTTLING_MASK (1 << GPU_DIE_TEMPERATURE_THROTTLING_BIT ) #define HBM_DIE_TEMPERATURE_THROTTLING_MASK (1 << HBM_DIE_TEMPERATURE_THROTTLING_BIT ) #define TGP_THROTTLING_MASK (1 << TGP_THROTTLING_BIT ) #define PCC_THROTTLING_MASK (1 << PCC_THROTTLING_BIT ) #define HBM_TEMPERATURE_EXCEEDING_TEMPERATURE_LIMIT_MASK (1 << HBM_TEMPERATURE_EXCEEDING_TEMPERATURE_LIMIT_BIT ) #define HBM_TEMPERATURE_EXCEEDING_MAX_MEMORY_TEMPERATURE_MASK (1 << HBM_TEMPERATURE_EXCEEDING_MAX_MEMORY_TEMPERATURE_BIT) //This structure to be DMA to SMBUS Config register space typedef struct { uint8_t MinorInfoVersion; uint8_t MajorInfoVersion; uint8_t TableSize; uint8_t Reserved; uint8_t Reserved1; uint8_t RevID; uint16_t DeviceID; uint16_t DieTemperatureLimit; uint16_t FanTargetTemperature; uint16_t MemoryTemperatureLimit; uint16_t MemoryTemperatureLimit1; uint16_t TGP; uint16_t CardPower; uint32_t DieTemperatureRegisterOffset; uint32_t Reserved2; uint32_t Reserved3; uint32_t Status; uint16_t DieTemperature; uint16_t CurrentMemoryTemperature; uint16_t MemoryTemperature; uint8_t MemoryHotspotPosition; uint8_t Reserved4; uint32_t BoardLevelEnergyAccumulator; } OutOfBandMonitor_t; typedef struct { uint32_t Version; // SECTION: Feature Enablement uint32_t FeaturesToRun[2]; // SECTION: Infrastructure Limits uint16_t SocketPowerLimitAc[PPT_THROTTLER_COUNT]; uint16_t SocketPowerLimitAcTau[PPT_THROTTLER_COUNT]; uint16_t SocketPowerLimitDc[PPT_THROTTLER_COUNT]; uint16_t SocketPowerLimitDcTau[PPT_THROTTLER_COUNT]; uint16_t TdcLimitSoc; // Amps uint16_t TdcLimitSocTau; // Time constant of LPF in ms uint16_t TdcLimitGfx; // Amps uint16_t TdcLimitGfxTau; // Time constant of LPF in ms uint16_t TedgeLimit; // Celcius uint16_t ThotspotLimit; // Celcius uint16_t TmemLimit; // Celcius uint16_t Tvr_gfxLimit; // Celcius uint16_t Tvr_mem0Limit; // Celcius uint16_t Tvr_mem1Limit; // Celcius uint16_t Tvr_socLimit; // Celcius uint16_t Tliquid0Limit; // Celcius uint16_t Tliquid1Limit; // Celcius uint16_t TplxLimit; // Celcius uint32_t FitLimit; // Failures in time (failures per million parts over the defined lifetime) uint16_t PpmPowerLimit; // Switch this this power limit when temperature is above PpmTempThreshold uint16_t PpmTemperatureThreshold; // SECTION: Throttler settings uint32_t ThrottlerControlMask; // See Throtter masks defines // SECTION: FW DSTATE Settings uint32_t FwDStateMask; // See FW DState masks defines // SECTION: ULV Settings uint16_t UlvVoltageOffsetSoc; // In mV(Q2) uint16_t UlvVoltageOffsetGfx; // In mV(Q2) uint8_t GceaLinkMgrIdleThreshold; //Set by SMU FW during enablment of SOC_ULV. Controls delay for GFX SDP port disconnection during idle events uint8_t paddingRlcUlvParams[3]; uint8_t UlvSmnclkDid; //DID for ULV mode. 0 means CLK will not be modified in ULV. uint8_t UlvMp1clkDid; //DID for ULV mode. 0 means CLK will not be modified in ULV. uint8_t UlvGfxclkBypass; // 1 to turn off/bypass Gfxclk during ULV, 0 to leave Gfxclk on during ULV uint8_t Padding234; uint16_t MinVoltageUlvGfx; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_GFX in ULV mode uint16_t MinVoltageUlvSoc; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_SOC in ULV mode // SECTION: Voltage Control Parameters uint16_t MinVoltageGfx; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_GFX uint16_t MinVoltageSoc; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_SOC uint16_t MaxVoltageGfx; // In mV(Q2) Maximum Voltage allowable of VDD_GFX uint16_t MaxVoltageSoc; // In mV(Q2) Maximum Voltage allowable of VDD_SOC uint16_t LoadLineResistanceGfx; // In mOhms with 8 fractional bits uint16_t LoadLineResistanceSoc; // In mOhms with 8 fractional bits //SECTION: DPM Config 1 DpmDescriptor_t DpmDescriptor[PPCLK_COUNT]; uint16_t FreqTableGfx [NUM_GFXCLK_DPM_LEVELS ]; // In MHz uint16_t FreqTableVclk [NUM_VCLK_DPM_LEVELS ]; // In MHz uint16_t FreqTableDclk [NUM_DCLK_DPM_LEVELS ]; // In MHz uint16_t FreqTableSocclk [NUM_SOCCLK_DPM_LEVELS ]; // In MHz uint16_t FreqTableUclk [NUM_UCLK_DPM_LEVELS ]; // In MHz uint16_t FreqTableDcefclk [NUM_DCEFCLK_DPM_LEVELS ]; // In MHz uint16_t FreqTableDispclk [NUM_DISPCLK_DPM_LEVELS ]; // In MHz uint16_t FreqTablePixclk [NUM_PIXCLK_DPM_LEVELS ]; // In MHz uint16_t FreqTablePhyclk [NUM_PHYCLK_DPM_LEVELS ]; // In MHz uint32_t Paddingclks[16]; uint16_t DcModeMaxFreq [PPCLK_COUNT ]; // In MHz uint16_t Padding8_Clks; uint8_t FreqTableUclkDiv [NUM_UCLK_DPM_LEVELS ]; // 0:Div-1, 1:Div-1/2, 2:Div-1/4, 3:Div-1/8 // SECTION: DPM Config 2 uint16_t Mp0clkFreq [NUM_MP0CLK_DPM_LEVELS]; // in MHz uint16_t Mp0DpmVoltage [NUM_MP0CLK_DPM_LEVELS]; // mV(Q2) uint16_t MemVddciVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2) uint16_t MemMvddVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2) // GFXCLK DPM uint16_t GfxclkFgfxoffEntry; // in Mhz uint16_t GfxclkFinit; // in Mhz uint16_t GfxclkFidle; // in MHz uint16_t GfxclkSlewRate; // for PLL babystepping??? uint16_t GfxclkFopt; // in Mhz uint8_t Padding567[2]; uint16_t GfxclkDsMaxFreq; // in MHz uint8_t GfxclkSource; // 0 = PLL, 1 = DFLL uint8_t Padding456; // UCLK section uint8_t LowestUclkReservedForUlv; // Set this to 1 if UCLK DPM0 is reserved for ULV-mode only uint8_t paddingUclk[3]; uint8_t MemoryType; // 0-GDDR6, 1-HBM uint8_t MemoryChannels; uint8_t PaddingMem[2]; // Link DPM Settings uint8_t PcieGenSpeed[NUM_LINK_LEVELS]; ///< 0:PciE-gen1 1:PciE-gen2 2:PciE-gen3 3:PciE-gen4 uint8_t PcieLaneCount[NUM_LINK_LEVELS]; ///< 1=x1, 2=x2, 3=x4, 4=x8, 5=x12, 6=x16 uint16_t LclkFreq[NUM_LINK_LEVELS]; // GFXCLK Thermal DPM (formerly 'Boost' Settings) uint16_t EnableTdpm; uint16_t TdpmHighHystTemperature; uint16_t TdpmLowHystTemperature; uint16_t GfxclkFreqHighTempLimit; // High limit on GFXCLK when temperature is high, for reliability. // SECTION: Fan Control uint16_t FanStopTemp; //Celcius uint16_t FanStartTemp; //Celcius uint16_t FanGainEdge; uint16_t FanGainHotspot; uint16_t FanGainLiquid0; uint16_t FanGainLiquid1; uint16_t FanGainVrGfx; uint16_t FanGainVrSoc; uint16_t FanGainVrMem0; uint16_t FanGainVrMem1; uint16_t FanGainPlx; uint16_t FanGainMem; uint16_t FanPwmMin; uint16_t FanAcousticLimitRpm; uint16_t FanThrottlingRpm; uint16_t FanMaximumRpm; uint16_t FanTargetTemperature; uint16_t FanTargetGfxclk; uint8_t FanTempInputSelect; uint8_t FanPadding; uint8_t FanZeroRpmEnable; uint8_t FanTachEdgePerRev; //uint8_t padding8_Fan[2]; // The following are AFC override parameters. Leave at 0 to use FW defaults. int16_t FuzzyFan_ErrorSetDelta; int16_t FuzzyFan_ErrorRateSetDelta; int16_t FuzzyFan_PwmSetDelta; uint16_t FuzzyFan_Reserved; // SECTION: AVFS // Overrides uint8_t OverrideAvfsGb[AVFS_VOLTAGE_COUNT]; uint8_t Padding8_Avfs[2]; QuadraticInt_t qAvfsGb[AVFS_VOLTAGE_COUNT]; // GHz->V Override of fused curve DroopInt_t dBtcGbGfxPll; // GHz->V BtcGb DroopInt_t dBtcGbGfxDfll; // GHz->V BtcGb DroopInt_t dBtcGbSoc; // GHz->V BtcGb LinearInt_t qAgingGb[AVFS_VOLTAGE_COUNT]; // GHz->V QuadraticInt_t qStaticVoltageOffset[AVFS_VOLTAGE_COUNT]; // GHz->V uint16_t DcTol[AVFS_VOLTAGE_COUNT]; // mV Q2 uint8_t DcBtcEnabled[AVFS_VOLTAGE_COUNT]; uint8_t Padding8_GfxBtc[2]; uint16_t DcBtcMin[AVFS_VOLTAGE_COUNT]; // mV Q2 uint16_t DcBtcMax[AVFS_VOLTAGE_COUNT]; // mV Q2 // SECTION: Advanced Options uint32_t DebugOverrides; QuadraticInt_t ReservedEquation0; QuadraticInt_t ReservedEquation1; QuadraticInt_t ReservedEquation2; QuadraticInt_t ReservedEquation3; // Total Power configuration, use defines from PwrConfig_e uint8_t TotalPowerConfig; //0-TDP, 1-TGP, 2-TCP Estimated, 3-TCP Measured uint8_t TotalPowerSpare1; uint16_t TotalPowerSpare2; // APCC Settings uint16_t PccThresholdLow; uint16_t PccThresholdHigh; uint32_t MGpuFanBoostLimitRpm; uint32_t PaddingAPCC[5]; // Temperature Dependent Vmin uint16_t VDDGFX_TVmin; //Celcius uint16_t VDDSOC_TVmin; //Celcius uint16_t VDDGFX_Vmin_HiTemp; // mV Q2 uint16_t VDDGFX_Vmin_LoTemp; // mV Q2 uint16_t VDDSOC_Vmin_HiTemp; // mV Q2 uint16_t VDDSOC_Vmin_LoTemp; // mV Q2 uint16_t VDDGFX_TVminHystersis; // Celcius uint16_t VDDSOC_TVminHystersis; // Celcius // BTC Setting uint32_t BtcConfig; uint16_t SsFmin[10]; // PPtable value to function similar to VFTFmin for SS Curve; Size is PPCLK_COUNT rounded to nearest multiple of 2 uint16_t DcBtcGb[AVFS_VOLTAGE_COUNT]; // SECTION: Board Reserved uint32_t Reserved[8]; // SECTION: BOARD PARAMETERS // I2C Control I2cControllerConfig_t I2cControllers[NUM_I2C_CONTROLLERS]; // SVI2 Board Parameters uint16_t MaxVoltageStepGfx; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value. uint16_t MaxVoltageStepSoc; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value. uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields uint8_t VddMem0VrMapping; // Use VR_MAPPING* bitfields uint8_t VddMem1VrMapping; // Use VR_MAPPING* bitfields uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode uint8_t SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode uint8_t ExternalSensorPresent; // External RDI connected to TMON (aka TEMP IN) uint8_t Padding8_V; // Telemetry Settings uint16_t GfxMaxCurrent; // in Amps int8_t GfxOffset; // in Amps uint8_t Padding_TelemetryGfx; uint16_t SocMaxCurrent; // in Amps int8_t SocOffset; // in Amps uint8_t Padding_TelemetrySoc; uint16_t Mem0MaxCurrent; // in Amps int8_t Mem0Offset; // in Amps uint8_t Padding_TelemetryMem0; uint16_t Mem1MaxCurrent; // in Amps int8_t Mem1Offset; // in Amps uint8_t Padding_TelemetryMem1; // GPIO Settings uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event uint8_t GthrGpio; // GPIO pin configured for GTHR Event uint8_t GthrPolarity; // replace GPIO polarity for GTHR // LED Display Settings uint8_t LedPin0; // GPIO number for LedPin[0] uint8_t LedPin1; // GPIO number for LedPin[1] uint8_t LedPin2; // GPIO number for LedPin[2] uint8_t padding8_4; // GFXCLK PLL Spread Spectrum uint8_t PllGfxclkSpreadEnabled; // on or off uint8_t PllGfxclkSpreadPercent; // Q4.4 uint16_t PllGfxclkSpreadFreq; // kHz // GFXCLK DFLL Spread Spectrum uint8_t DfllGfxclkSpreadEnabled; // on or off uint8_t DfllGfxclkSpreadPercent; // Q4.4 uint16_t DfllGfxclkSpreadFreq; // kHz // UCLK Spread Spectrum uint8_t UclkSpreadEnabled; // on or off uint8_t UclkSpreadPercent; // Q4.4 uint16_t UclkSpreadFreq; // kHz // SOCCLK Spread Spectrum uint8_t SoclkSpreadEnabled; // on or off uint8_t SocclkSpreadPercent; // Q4.4 uint16_t SocclkSpreadFreq; // kHz // Total board power uint16_t TotalBoardPower; //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power uint16_t BoardPadding; // Mvdd Svi2 Div Ratio Setting uint32_t MvddRatio; // This is used for MVDD Vid workaround. It has 16 fractional bits (Q16.16) uint8_t RenesesLoadLineEnabled; uint8_t GfxLoadlineResistance; uint8_t SocLoadlineResistance; uint8_t Padding8_Loadline; uint32_t BoardReserved[8]; // Padding for MMHUB - do not modify this uint32_t MmHubPadding[8]; // SMU internal use } PPTable_t; typedef struct { // Time constant parameters for clock averages in ms uint16_t GfxclkAverageLpfTau; uint16_t SocclkAverageLpfTau; uint16_t UclkAverageLpfTau; uint16_t GfxActivityLpfTau; uint16_t UclkActivityLpfTau; uint16_t SocketPowerLpfTau; // Padding - ignore uint32_t MmHubPadding[8]; // SMU internal use } DriverSmuConfig_t; typedef struct { uint16_t GfxclkFmin; // MHz uint16_t GfxclkFmax; // MHz uint16_t GfxclkFreq1; // MHz uint16_t GfxclkVolt1; // mV (Q2) uint16_t GfxclkFreq2; // MHz uint16_t GfxclkVolt2; // mV (Q2) uint16_t GfxclkFreq3; // MHz uint16_t GfxclkVolt3; // mV (Q2) uint16_t UclkFmax; // MHz int16_t OverDrivePct; // % uint16_t FanMaximumRpm; uint16_t FanMinimumPwm; uint16_t FanTargetTemperature; // Degree Celcius uint16_t MaxOpTemp; // Degree Celcius uint16_t FanZeroRpmEnable; uint16_t Padding; uint32_t MmHubPadding[8]; // SMU internal use } OverDriveTable_t; typedef struct { uint16_t CurrClock[PPCLK_COUNT]; uint16_t AverageGfxclkFrequency; uint16_t AverageSocclkFrequency; uint16_t AverageUclkFrequency ; uint16_t AverageGfxActivity ; uint16_t AverageUclkActivity ; uint8_t CurrSocVoltageOffset ; uint8_t CurrGfxVoltageOffset ; uint8_t CurrMemVidOffset ; uint8_t Padding8 ; uint16_t AverageSocketPower ; uint16_t TemperatureEdge ; uint16_t TemperatureHotspot ; uint16_t TemperatureMem ; uint16_t TemperatureVrGfx ; uint16_t TemperatureVrMem0 ; uint16_t TemperatureVrMem1 ; uint16_t TemperatureVrSoc ; uint16_t TemperatureLiquid0 ; uint16_t TemperatureLiquid1 ; uint16_t TemperaturePlx ; uint16_t Padding16 ; uint32_t ThrottlerStatus ; uint8_t LinkDpmLevel; uint8_t Padding8_2; uint16_t CurrFanSpeed; // Padding - ignore uint32_t MmHubPadding[8]; // SMU internal use } SmuMetrics_t; typedef struct { uint16_t MinClock; // This is either DCEFCLK or SOCCLK (in MHz) uint16_t MaxClock; // This is either DCEFCLK or SOCCLK (in MHz) uint16_t MinUclk; uint16_t MaxUclk; uint8_t WmSetting; uint8_t Padding[3]; uint32_t MmHubPadding[8]; // SMU internal use } WatermarkRowGeneric_t; #define NUM_WM_RANGES 4 typedef enum { WM_SOCCLK = 0, WM_DCEFCLK, WM_COUNT, } WM_CLOCK_e; typedef struct { // Watermarks WatermarkRowGeneric_t WatermarkRow[WM_COUNT][NUM_WM_RANGES]; uint32_t MmHubPadding[8]; // SMU internal use } Watermarks_t; typedef struct { uint16_t avgPsmCount[28]; uint16_t minPsmCount[28]; float avgPsmVoltage[28]; float minPsmVoltage[28]; uint32_t MmHubPadding[32]; // SMU internal use } AvfsDebugTable_t_NV14; typedef struct { uint16_t avgPsmCount[36]; uint16_t minPsmCount[36]; float avgPsmVoltage[36]; float minPsmVoltage[36]; uint32_t MmHubPadding[8]; // SMU internal use } AvfsDebugTable_t_NV10; typedef struct { uint8_t AvfsVersion; uint8_t Padding; uint8_t AvfsEn[AVFS_VOLTAGE_COUNT]; uint8_t OverrideVFT[AVFS_VOLTAGE_COUNT]; uint8_t OverrideAvfsGb[AVFS_VOLTAGE_COUNT]; uint8_t OverrideTemperatures[AVFS_VOLTAGE_COUNT]; uint8_t OverrideVInversion[AVFS_VOLTAGE_COUNT]; uint8_t OverrideP2V[AVFS_VOLTAGE_COUNT]; uint8_t OverrideP2VCharzFreq[AVFS_VOLTAGE_COUNT]; int32_t VFT0_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 int32_t VFT0_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 int32_t VFT0_b[AVFS_VOLTAGE_COUNT]; // Q32 int32_t VFT1_m1[AVFS_VOLTAGE_COUNT]; // Q8.16 int32_t VFT1_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 int32_t VFT1_b[AVFS_VOLTAGE_COUNT]; // Q32 int32_t VFT2_m1[AVFS_VOLTAGE_COUNT]; // Q8.16 int32_t VFT2_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 int32_t VFT2_b[AVFS_VOLTAGE_COUNT]; // Q32 int32_t AvfsGb0_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 int32_t AvfsGb0_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 int32_t AvfsGb0_b[AVFS_VOLTAGE_COUNT]; // Q32 int32_t AcBtcGb_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 int32_t AcBtcGb_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 int32_t AcBtcGb_b[AVFS_VOLTAGE_COUNT]; // Q32 uint32_t AvfsTempCold[AVFS_VOLTAGE_COUNT]; uint32_t AvfsTempMid[AVFS_VOLTAGE_COUNT]; uint32_t AvfsTempHot[AVFS_VOLTAGE_COUNT]; uint32_t VInversion[AVFS_VOLTAGE_COUNT]; // in mV with 2 fractional bits int32_t P2V_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 int32_t P2V_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 int32_t P2V_b[AVFS_VOLTAGE_COUNT]; // Q32 uint32_t P2VCharzFreq[AVFS_VOLTAGE_COUNT]; // in 10KHz units uint32_t EnabledAvfsModules[2]; //NV10 - 36 AVFS modules uint32_t MmHubPadding[8]; // SMU internal use } AvfsFuseOverride_t; typedef struct { uint8_t Gfx_ActiveHystLimit; uint8_t Gfx_IdleHystLimit; uint8_t Gfx_FPS; uint8_t Gfx_MinActiveFreqType; uint8_t Gfx_BoosterFreqType; uint8_t Gfx_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock. uint16_t Gfx_MinActiveFreq; // MHz uint16_t Gfx_BoosterFreq; // MHz uint16_t Gfx_PD_Data_time_constant; // Time constant of PD controller in ms uint32_t Gfx_PD_Data_limit_a; // Q16 uint32_t Gfx_PD_Data_limit_b; // Q16 uint32_t Gfx_PD_Data_limit_c; // Q16 uint32_t Gfx_PD_Data_error_coeff; // Q16 uint32_t Gfx_PD_Data_error_rate_coeff; // Q16 uint8_t Soc_ActiveHystLimit; uint8_t Soc_IdleHystLimit; uint8_t Soc_FPS; uint8_t Soc_MinActiveFreqType; uint8_t Soc_BoosterFreqType; uint8_t Soc_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock. uint16_t Soc_MinActiveFreq; // MHz uint16_t Soc_BoosterFreq; // MHz uint16_t Soc_PD_Data_time_constant; // Time constant of PD controller in ms uint32_t Soc_PD_Data_limit_a; // Q16 uint32_t Soc_PD_Data_limit_b; // Q16 uint32_t Soc_PD_Data_limit_c; // Q16 uint32_t Soc_PD_Data_error_coeff; // Q16 uint32_t Soc_PD_Data_error_rate_coeff; // Q16 uint8_t Mem_ActiveHystLimit; uint8_t Mem_IdleHystLimit; uint8_t Mem_FPS; uint8_t Mem_MinActiveFreqType; uint8_t Mem_BoosterFreqType; uint8_t Mem_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock. uint16_t Mem_MinActiveFreq; // MHz uint16_t Mem_BoosterFreq; // MHz uint16_t Mem_PD_Data_time_constant; // Time constant of PD controller in ms uint32_t Mem_PD_Data_limit_a; // Q16 uint32_t Mem_PD_Data_limit_b; // Q16 uint32_t Mem_PD_Data_limit_c; // Q16 uint32_t Mem_PD_Data_error_coeff; // Q16 uint32_t Mem_PD_Data_error_rate_coeff; // Q16 uint32_t Mem_UpThreshold_Limit; // Q16 uint8_t Mem_UpHystLimit; uint8_t Mem_DownHystLimit; uint16_t Mem_Fps; uint32_t MmHubPadding[8]; // SMU internal use } DpmActivityMonitorCoeffInt_t; // Workload bits #define WORKLOAD_PPLIB_DEFAULT_BIT 0 #define WORKLOAD_PPLIB_FULL_SCREEN_3D_BIT 1 #define WORKLOAD_PPLIB_POWER_SAVING_BIT 2 #define WORKLOAD_PPLIB_VIDEO_BIT 3 #define WORKLOAD_PPLIB_VR_BIT 4 #define WORKLOAD_PPLIB_COMPUTE_BIT 5 #define WORKLOAD_PPLIB_CUSTOM_BIT 6 #define WORKLOAD_PPLIB_COUNT 7 // These defines are used with the following messages: // SMC_MSG_TransferTableDram2Smu // SMC_MSG_TransferTableSmu2Dram // Table transfer status #define TABLE_TRANSFER_OK 0x0 #define TABLE_TRANSFER_FAILED 0xFF // Table types #define TABLE_PPTABLE 0 #define TABLE_WATERMARKS 1 #define TABLE_AVFS 2 #define TABLE_AVFS_PSM_DEBUG 3 #define TABLE_AVFS_FUSE_OVERRIDE 4 #define TABLE_PMSTATUSLOG 5 #define TABLE_SMU_METRICS 6 #define TABLE_DRIVER_SMU_CONFIG 7 #define TABLE_ACTIVITY_MONITOR_COEFF 8 #define TABLE_OVERDRIVE 9 #define TABLE_I2C_COMMANDS 10 #define TABLE_PACE 11 #define TABLE_COUNT 12 //RLC Pace Table total number of levels #define RLC_PACE_TABLE_NUM_LEVELS 16 typedef struct { float FlopsPerByteTable[RLC_PACE_TABLE_NUM_LEVELS]; uint32_t MmHubPadding[8]; // SMU internal use } RlcPaceFlopsPerByteOverride_t; // These defines are used with the SMC_MSG_SetUclkFastSwitch message. #define UCLK_SWITCH_SLOW 0 #define UCLK_SWITCH_FAST 1 #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1