Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Daniel Baluta | 807 | 80.14% | 1 | 16.67% |
David Heidelberg | 199 | 19.76% | 4 | 66.67% |
Thomas Gleixner | 1 | 0.10% | 1 | 16.67% |
Total | 1007 | 6 |
// SPDX-License-Identifier: GPL-2.0-only /* * AL3320A - Dyna Image Ambient Light Sensor * * Copyright (c) 2014, Intel Corporation. * * IIO driver for AL3320A (7-bit I2C slave address 0x1C). * * TODO: interrupt support, thresholds * When the driver will get support for interrupt handling, then interrupt * will need to be disabled before turning sensor OFF in order to avoid * potential races with the interrupt handling. */ #include <linux/bitfield.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/of.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #define AL3320A_DRV_NAME "al3320a" #define AL3320A_REG_CONFIG 0x00 #define AL3320A_REG_STATUS 0x01 #define AL3320A_REG_INT 0x02 #define AL3320A_REG_WAIT 0x06 #define AL3320A_REG_CONFIG_RANGE 0x07 #define AL3320A_REG_PERSIST 0x08 #define AL3320A_REG_MEAN_TIME 0x09 #define AL3320A_REG_ADUMMY 0x0A #define AL3320A_REG_DATA_LOW 0x22 #define AL3320A_REG_LOW_THRESH_LOW 0x30 #define AL3320A_REG_LOW_THRESH_HIGH 0x31 #define AL3320A_REG_HIGH_THRESH_LOW 0x32 #define AL3320A_REG_HIGH_THRESH_HIGH 0x33 #define AL3320A_CONFIG_DISABLE 0x00 #define AL3320A_CONFIG_ENABLE 0x01 #define AL3320A_GAIN_MASK GENMASK(2, 1) /* chip params default values */ #define AL3320A_DEFAULT_MEAN_TIME 4 #define AL3320A_DEFAULT_WAIT_TIME 0 /* no waiting */ #define AL3320A_SCALE_AVAILABLE "0.512 0.128 0.032 0.01" enum al3320a_range { AL3320A_RANGE_1, /* 33.28 Klx */ AL3320A_RANGE_2, /* 8.32 Klx */ AL3320A_RANGE_3, /* 2.08 Klx */ AL3320A_RANGE_4 /* 0.65 Klx */ }; static const int al3320a_scales[][2] = { {0, 512000}, {0, 128000}, {0, 32000}, {0, 10000} }; struct al3320a_data { struct i2c_client *client; }; static const struct iio_chan_spec al3320a_channels[] = { { .type = IIO_LIGHT, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), } }; static IIO_CONST_ATTR(in_illuminance_scale_available, AL3320A_SCALE_AVAILABLE); static struct attribute *al3320a_attributes[] = { &iio_const_attr_in_illuminance_scale_available.dev_attr.attr, NULL, }; static const struct attribute_group al3320a_attribute_group = { .attrs = al3320a_attributes, }; static int al3320a_set_pwr(struct i2c_client *client, bool pwr) { u8 val = pwr ? AL3320A_CONFIG_ENABLE : AL3320A_CONFIG_DISABLE; return i2c_smbus_write_byte_data(client, AL3320A_REG_CONFIG, val); } static void al3320a_set_pwr_off(void *_data) { struct al3320a_data *data = _data; al3320a_set_pwr(data->client, false); } static int al3320a_init(struct al3320a_data *data) { int ret; ret = al3320a_set_pwr(data->client, true); if (ret < 0) return ret; ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG_RANGE, FIELD_PREP(AL3320A_GAIN_MASK, AL3320A_RANGE_3)); if (ret < 0) return ret; ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_MEAN_TIME, AL3320A_DEFAULT_MEAN_TIME); if (ret < 0) return ret; ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_WAIT, AL3320A_DEFAULT_WAIT_TIME); if (ret < 0) return ret; return 0; } static int al3320a_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { struct al3320a_data *data = iio_priv(indio_dev); int ret; switch (mask) { case IIO_CHAN_INFO_RAW: /* * ALS ADC value is stored in two adjacent registers: * - low byte of output is stored at AL3320A_REG_DATA_LOW * - high byte of output is stored at AL3320A_REG_DATA_LOW + 1 */ ret = i2c_smbus_read_word_data(data->client, AL3320A_REG_DATA_LOW); if (ret < 0) return ret; *val = ret; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: ret = i2c_smbus_read_byte_data(data->client, AL3320A_REG_CONFIG_RANGE); if (ret < 0) return ret; ret = FIELD_GET(AL3320A_GAIN_MASK, ret); *val = al3320a_scales[ret][0]; *val2 = al3320a_scales[ret][1]; return IIO_VAL_INT_PLUS_MICRO; } return -EINVAL; } static int al3320a_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, int val2, long mask) { struct al3320a_data *data = iio_priv(indio_dev); int i; switch (mask) { case IIO_CHAN_INFO_SCALE: for (i = 0; i < ARRAY_SIZE(al3320a_scales); i++) { if (val != al3320a_scales[i][0] || val2 != al3320a_scales[i][1]) continue; return i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG_RANGE, FIELD_PREP(AL3320A_GAIN_MASK, i)); } break; } return -EINVAL; } static const struct iio_info al3320a_info = { .read_raw = al3320a_read_raw, .write_raw = al3320a_write_raw, .attrs = &al3320a_attribute_group, }; static int al3320a_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct al3320a_data *data; struct iio_dev *indio_dev; int ret; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); data->client = client; indio_dev->info = &al3320a_info; indio_dev->name = AL3320A_DRV_NAME; indio_dev->channels = al3320a_channels; indio_dev->num_channels = ARRAY_SIZE(al3320a_channels); indio_dev->modes = INDIO_DIRECT_MODE; ret = al3320a_init(data); if (ret < 0) { dev_err(&client->dev, "al3320a chip init failed\n"); return ret; } ret = devm_add_action_or_reset(&client->dev, al3320a_set_pwr_off, data); if (ret < 0) return ret; return devm_iio_device_register(&client->dev, indio_dev); } static int __maybe_unused al3320a_suspend(struct device *dev) { return al3320a_set_pwr(to_i2c_client(dev), false); } static int __maybe_unused al3320a_resume(struct device *dev) { return al3320a_set_pwr(to_i2c_client(dev), true); } static SIMPLE_DEV_PM_OPS(al3320a_pm_ops, al3320a_suspend, al3320a_resume); static const struct i2c_device_id al3320a_id[] = { {"al3320a", 0}, {} }; MODULE_DEVICE_TABLE(i2c, al3320a_id); static const struct of_device_id al3320a_of_match[] = { { .compatible = "dynaimage,al3320a", }, {}, }; MODULE_DEVICE_TABLE(of, al3320a_of_match); static struct i2c_driver al3320a_driver = { .driver = { .name = AL3320A_DRV_NAME, .of_match_table = al3320a_of_match, .pm = &al3320a_pm_ops, }, .probe = al3320a_probe, .id_table = al3320a_id, }; module_i2c_driver(al3320a_driver); MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>"); MODULE_DESCRIPTION("AL3320A Ambient Light Sensor driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1