Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Michael Hunold | 1316 | 85.07% | 3 | 42.86% |
Patrick Boettcher | 222 | 14.35% | 1 | 14.29% |
Mauro Carvalho Chehab | 7 | 0.45% | 2 | 28.57% |
Thomas Gleixner | 2 | 0.13% | 1 | 14.29% |
Total | 1547 | 7 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * dib3000mb_priv.h * * Copyright (C) 2004 Patrick Boettcher (patrick.boettcher@posteo.de) * * for more information see dib3000mb.c . */ #ifndef __DIB3000MB_PRIV_H_INCLUDED__ #define __DIB3000MB_PRIV_H_INCLUDED__ /* handy shortcuts */ #define rd(reg) dib3000_read_reg(state,reg) #define wr(reg,val) if (dib3000_write_reg(state,reg,val)) \ { pr_err("while sending 0x%04x to 0x%04x.", val, reg); return -EREMOTEIO; } #define wr_foreach(a,v) { int i; \ if (sizeof(a) != sizeof(v)) \ pr_err("sizeof: %zu %zu is different", sizeof(a), sizeof(v));\ for (i=0; i < sizeof(a)/sizeof(u16); i++) \ wr(a[i],v[i]); \ } #define set_or(reg,val) wr(reg,rd(reg) | val) #define set_and(reg,val) wr(reg,rd(reg) & val) /* debug */ #define dprintk(level, fmt, arg...) do { \ if (debug & level) \ printk(KERN_DEBUG pr_fmt("%s: " fmt), \ __func__, ##arg); \ } while (0) /* mask for enabling a specific pid for the pid_filter */ #define DIB3000_ACTIVATE_PID_FILTERING (0x2000) /* common values for tuning */ #define DIB3000_ALPHA_0 ( 0) #define DIB3000_ALPHA_1 ( 1) #define DIB3000_ALPHA_2 ( 2) #define DIB3000_ALPHA_4 ( 4) #define DIB3000_CONSTELLATION_QPSK ( 0) #define DIB3000_CONSTELLATION_16QAM ( 1) #define DIB3000_CONSTELLATION_64QAM ( 2) #define DIB3000_GUARD_TIME_1_32 ( 0) #define DIB3000_GUARD_TIME_1_16 ( 1) #define DIB3000_GUARD_TIME_1_8 ( 2) #define DIB3000_GUARD_TIME_1_4 ( 3) #define DIB3000_TRANSMISSION_MODE_2K ( 0) #define DIB3000_TRANSMISSION_MODE_8K ( 1) #define DIB3000_SELECT_LP ( 0) #define DIB3000_SELECT_HP ( 1) #define DIB3000_FEC_1_2 ( 1) #define DIB3000_FEC_2_3 ( 2) #define DIB3000_FEC_3_4 ( 3) #define DIB3000_FEC_5_6 ( 5) #define DIB3000_FEC_7_8 ( 7) #define DIB3000_HRCH_OFF ( 0) #define DIB3000_HRCH_ON ( 1) #define DIB3000_DDS_INVERSION_OFF ( 0) #define DIB3000_DDS_INVERSION_ON ( 1) #define DIB3000_TUNER_WRITE_ENABLE(a) (0xffff & (a << 8)) #define DIB3000_TUNER_WRITE_DISABLE(a) (0xffff & ((a << 8) | (1 << 7))) #define DIB3000_REG_MANUFACTOR_ID ( 1025) #define DIB3000_I2C_ID_DIBCOM (0x01b3) #define DIB3000_REG_DEVICE_ID ( 1026) #define DIB3000MB_DEVICE_ID (0x3000) #define DIB3000MC_DEVICE_ID (0x3001) #define DIB3000P_DEVICE_ID (0x3002) /* frontend state */ struct dib3000_state { struct i2c_adapter* i2c; /* configuration settings */ struct dib3000_config config; struct dvb_frontend frontend; int timing_offset; int timing_offset_comp_done; u32 last_tuned_bw; u32 last_tuned_freq; }; /* register addresses and some of their default values */ /* restart subsystems */ #define DIB3000MB_REG_RESTART ( 0) #define DIB3000MB_RESTART_OFF ( 0) #define DIB3000MB_RESTART_AUTO_SEARCH (1 << 1) #define DIB3000MB_RESTART_CTRL (1 << 2) #define DIB3000MB_RESTART_AGC (1 << 3) /* FFT size */ #define DIB3000MB_REG_FFT ( 1) /* Guard time */ #define DIB3000MB_REG_GUARD_TIME ( 2) /* QAM */ #define DIB3000MB_REG_QAM ( 3) /* Alpha coefficient high priority Viterbi algorithm */ #define DIB3000MB_REG_VIT_ALPHA ( 4) /* spectrum inversion */ #define DIB3000MB_REG_DDS_INV ( 5) /* DDS frequency value (IF position) ad ? values don't match reg_3000mb.txt */ #define DIB3000MB_REG_DDS_FREQ_MSB ( 6) #define DIB3000MB_REG_DDS_FREQ_LSB ( 7) #define DIB3000MB_DDS_FREQ_MSB ( 178) #define DIB3000MB_DDS_FREQ_LSB ( 8990) /* timing frequency (carrier spacing) */ static u16 dib3000mb_reg_timing_freq[] = { 8,9 }; static u16 dib3000mb_timing_freq[][2] = { { 126 , 48873 }, /* 6 MHz */ { 147 , 57019 }, /* 7 MHz */ { 168 , 65164 }, /* 8 MHz */ }; /* impulse noise parameter */ /* 36 ??? */ static u16 dib3000mb_reg_impulse_noise[] = { 10,11,12,15,36 }; enum dib3000mb_impulse_noise_type { DIB3000MB_IMPNOISE_OFF, DIB3000MB_IMPNOISE_MOBILE, DIB3000MB_IMPNOISE_FIXED, DIB3000MB_IMPNOISE_DEFAULT }; static u16 dib3000mb_impulse_noise_values[][5] = { { 0x0000, 0x0004, 0x0014, 0x01ff, 0x0399 }, /* off */ { 0x0001, 0x0004, 0x0014, 0x01ff, 0x037b }, /* mobile */ { 0x0001, 0x0004, 0x0020, 0x01bd, 0x0399 }, /* fixed */ { 0x0000, 0x0002, 0x000a, 0x01ff, 0x0399 }, /* default */ }; /* * Dual Automatic-Gain-Control * - gains RF in tuner (AGC1) * - gains IF after filtering (AGC2) */ /* also from 16 to 18 */ static u16 dib3000mb_reg_agc_gain[] = { 19,20,21,22,23,24,25,26,27,28,29,30,31,32 }; static u16 dib3000mb_default_agc_gain[] = { 0x0001, 52429, 623, 128, 166, 195, 61, /* RF ??? */ 0x0001, 53766, 38011, 0, 90, 33, 23 }; /* IF ??? */ /* phase noise */ /* 36 is set when setting the impulse noise */ static u16 dib3000mb_reg_phase_noise[] = { 33,34,35,37,38 }; static u16 dib3000mb_default_noise_phase[] = { 2, 544, 0, 5, 4 }; /* lock duration */ static u16 dib3000mb_reg_lock_duration[] = { 39,40 }; static u16 dib3000mb_default_lock_duration[] = { 135, 135 }; /* AGC loop bandwidth */ static u16 dib3000mb_reg_agc_bandwidth[] = { 43,44,45,46,47,48,49,50 }; static u16 dib3000mb_agc_bandwidth_low[] = { 2088, 10, 2088, 10, 3448, 5, 3448, 5 }; static u16 dib3000mb_agc_bandwidth_high[] = { 2349, 5, 2349, 5, 2586, 2, 2586, 2 }; /* * lock0 definition (coff_lock) */ #define DIB3000MB_REG_LOCK0_MASK ( 51) #define DIB3000MB_LOCK0_DEFAULT ( 4) /* * lock1 definition (cpil_lock) * for auto search * which values hide behind the lock masks */ #define DIB3000MB_REG_LOCK1_MASK ( 52) #define DIB3000MB_LOCK1_SEARCH_4 (0x0004) #define DIB3000MB_LOCK1_SEARCH_2048 (0x0800) #define DIB3000MB_LOCK1_DEFAULT (0x0001) /* * lock2 definition (fec_lock) */ #define DIB3000MB_REG_LOCK2_MASK ( 53) #define DIB3000MB_LOCK2_DEFAULT (0x0080) /* * SEQ ? what was that again ... :) * changes when, inversion, guard time and fft is * either automatically detected or not */ #define DIB3000MB_REG_SEQ ( 54) /* bandwidth */ static u16 dib3000mb_reg_bandwidth[] = { 55,56,57,58,59,60,61,62,63,64,65,66,67 }; static u16 dib3000mb_bandwidth_6mhz[] = { 0, 33, 53312, 112, 46635, 563, 36565, 0, 1000, 0, 1010, 1, 45264 }; static u16 dib3000mb_bandwidth_7mhz[] = { 0, 28, 64421, 96, 39973, 483, 3255, 0, 1000, 0, 1010, 1, 45264 }; static u16 dib3000mb_bandwidth_8mhz[] = { 0, 25, 23600, 84, 34976, 422, 43808, 0, 1000, 0, 1010, 1, 45264 }; #define DIB3000MB_REG_UNK_68 ( 68) #define DIB3000MB_UNK_68 ( 0) #define DIB3000MB_REG_UNK_69 ( 69) #define DIB3000MB_UNK_69 ( 0) #define DIB3000MB_REG_UNK_71 ( 71) #define DIB3000MB_UNK_71 ( 0) #define DIB3000MB_REG_UNK_77 ( 77) #define DIB3000MB_UNK_77 ( 6) #define DIB3000MB_REG_UNK_78 ( 78) #define DIB3000MB_UNK_78 (0x0080) /* isi */ #define DIB3000MB_REG_ISI ( 79) #define DIB3000MB_ISI_ACTIVATE ( 0) #define DIB3000MB_ISI_INHIBIT ( 1) /* sync impovement */ #define DIB3000MB_REG_SYNC_IMPROVEMENT ( 84) #define DIB3000MB_SYNC_IMPROVE_2K_1_8 ( 3) #define DIB3000MB_SYNC_IMPROVE_DEFAULT ( 0) /* phase noise compensation inhibition */ #define DIB3000MB_REG_PHASE_NOISE ( 87) #define DIB3000MB_PHASE_NOISE_DEFAULT ( 0) #define DIB3000MB_REG_UNK_92 ( 92) #define DIB3000MB_UNK_92 (0x0080) #define DIB3000MB_REG_UNK_96 ( 96) #define DIB3000MB_UNK_96 (0x0010) #define DIB3000MB_REG_UNK_97 ( 97) #define DIB3000MB_UNK_97 (0x0009) /* mobile mode ??? */ #define DIB3000MB_REG_MOBILE_MODE ( 101) #define DIB3000MB_MOBILE_MODE_ON ( 1) #define DIB3000MB_MOBILE_MODE_OFF ( 0) #define DIB3000MB_REG_UNK_106 ( 106) #define DIB3000MB_UNK_106 (0x0080) #define DIB3000MB_REG_UNK_107 ( 107) #define DIB3000MB_UNK_107 (0x0080) #define DIB3000MB_REG_UNK_108 ( 108) #define DIB3000MB_UNK_108 (0x0080) /* fft */ #define DIB3000MB_REG_UNK_121 ( 121) #define DIB3000MB_UNK_121_2K ( 7) #define DIB3000MB_UNK_121_DEFAULT ( 5) #define DIB3000MB_REG_UNK_122 ( 122) #define DIB3000MB_UNK_122 ( 2867) /* QAM for mobile mode */ #define DIB3000MB_REG_MOBILE_MODE_QAM ( 126) #define DIB3000MB_MOBILE_MODE_QAM_64 ( 3) #define DIB3000MB_MOBILE_MODE_QAM_QPSK_16 ( 1) #define DIB3000MB_MOBILE_MODE_QAM_OFF ( 0) /* * data diversity when having more than one chip on-board * see also DIB3000MB_OUTPUT_MODE_DATA_DIVERSITY */ #define DIB3000MB_REG_DATA_IN_DIVERSITY ( 127) #define DIB3000MB_DATA_DIVERSITY_IN_OFF ( 0) #define DIB3000MB_DATA_DIVERSITY_IN_ON ( 2) /* vit hrch */ #define DIB3000MB_REG_VIT_HRCH ( 128) /* vit code rate */ #define DIB3000MB_REG_VIT_CODE_RATE ( 129) /* vit select hp */ #define DIB3000MB_REG_VIT_HP ( 130) /* time frame for Bit-Error-Rate calculation */ #define DIB3000MB_REG_BERLEN ( 135) #define DIB3000MB_BERLEN_LONG ( 0) #define DIB3000MB_BERLEN_DEFAULT ( 1) #define DIB3000MB_BERLEN_MEDIUM ( 2) #define DIB3000MB_BERLEN_SHORT ( 3) /* 142 - 152 FIFO parameters * which is what ? */ #define DIB3000MB_REG_FIFO_142 ( 142) #define DIB3000MB_FIFO_142 ( 0) /* MPEG2 TS output mode */ #define DIB3000MB_REG_MPEG2_OUT_MODE ( 143) #define DIB3000MB_MPEG2_OUT_MODE_204 ( 0) #define DIB3000MB_MPEG2_OUT_MODE_188 ( 1) #define DIB3000MB_REG_PID_PARSE ( 144) #define DIB3000MB_PID_PARSE_INHIBIT ( 0) #define DIB3000MB_PID_PARSE_ACTIVATE ( 1) #define DIB3000MB_REG_FIFO ( 145) #define DIB3000MB_FIFO_INHIBIT ( 1) #define DIB3000MB_FIFO_ACTIVATE ( 0) #define DIB3000MB_REG_FIFO_146 ( 146) #define DIB3000MB_FIFO_146 ( 3) #define DIB3000MB_REG_FIFO_147 ( 147) #define DIB3000MB_FIFO_147 (0x0100) /* * pidfilter * it is not a hardware pidfilter but a filter which drops all pids * except the ones set. Necessary because of the limited USB1.1 bandwidth. * regs 153-168 */ #define DIB3000MB_REG_FIRST_PID ( 153) #define DIB3000MB_NUM_PIDS ( 16) /* * output mode * USB devices have to use 'slave'-mode * see also DIB3000MB_REG_ELECT_OUT_MODE */ #define DIB3000MB_REG_OUTPUT_MODE ( 169) #define DIB3000MB_OUTPUT_MODE_GATED_CLK ( 0) #define DIB3000MB_OUTPUT_MODE_CONT_CLK ( 1) #define DIB3000MB_OUTPUT_MODE_SERIAL ( 2) #define DIB3000MB_OUTPUT_MODE_DATA_DIVERSITY ( 5) #define DIB3000MB_OUTPUT_MODE_SLAVE ( 6) /* irq event mask */ #define DIB3000MB_REG_IRQ_EVENT_MASK ( 170) #define DIB3000MB_IRQ_EVENT_MASK ( 0) /* filter coefficients */ static u16 dib3000mb_reg_filter_coeffs[] = { 171, 172, 173, 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 188, 189, 190, 191, 192, 194 }; static u16 dib3000mb_filter_coeffs[] = { 226, 160, 29, 979, 998, 19, 22, 1019, 1006, 1022, 12, 6, 1017, 1017, 3, 6, 1019, 1021, 2, 3, 1, 0, }; /* * mobile algorithm (when you are moving with your device) * but not faster than 90 km/h */ #define DIB3000MB_REG_MOBILE_ALGO ( 195) #define DIB3000MB_MOBILE_ALGO_ON ( 0) #define DIB3000MB_MOBILE_ALGO_OFF ( 1) /* multiple demodulators algorithm */ #define DIB3000MB_REG_MULTI_DEMOD_MSB ( 206) #define DIB3000MB_REG_MULTI_DEMOD_LSB ( 207) /* terminator, no more demods */ #define DIB3000MB_MULTI_DEMOD_MSB ( 32767) #define DIB3000MB_MULTI_DEMOD_LSB ( 4095) /* bring the device into a known */ #define DIB3000MB_REG_RESET_DEVICE ( 1024) #define DIB3000MB_RESET_DEVICE (0x812c) #define DIB3000MB_RESET_DEVICE_RST ( 0) /* hardware clock configuration */ #define DIB3000MB_REG_CLOCK ( 1027) #define DIB3000MB_CLOCK_DEFAULT (0x9000) #define DIB3000MB_CLOCK_DIVERSITY (0x92b0) /* power down config */ #define DIB3000MB_REG_POWER_CONTROL ( 1028) #define DIB3000MB_POWER_DOWN ( 1) #define DIB3000MB_POWER_UP ( 0) /* electrical output mode */ #define DIB3000MB_REG_ELECT_OUT_MODE ( 1029) #define DIB3000MB_ELECT_OUT_MODE_OFF ( 0) #define DIB3000MB_ELECT_OUT_MODE_ON ( 1) /* set the tuner i2c address */ #define DIB3000MB_REG_TUNER ( 1089) /* monitoring registers (read only) */ /* agc loop locked (size: 1) */ #define DIB3000MB_REG_AGC_LOCK ( 324) /* agc power (size: 16) */ #define DIB3000MB_REG_AGC_POWER ( 325) /* agc1 value (16) */ #define DIB3000MB_REG_AGC1_VALUE ( 326) /* agc2 value (16) */ #define DIB3000MB_REG_AGC2_VALUE ( 327) /* total RF power (16), can be used for signal strength */ #define DIB3000MB_REG_RF_POWER ( 328) /* dds_frequency with offset (24) */ #define DIB3000MB_REG_DDS_VALUE_MSB ( 339) #define DIB3000MB_REG_DDS_VALUE_LSB ( 340) /* timing offset signed (24) */ #define DIB3000MB_REG_TIMING_OFFSET_MSB ( 341) #define DIB3000MB_REG_TIMING_OFFSET_LSB ( 342) /* fft start position (13) */ #define DIB3000MB_REG_FFT_WINDOW_POS ( 353) /* carriers locked (1) */ #define DIB3000MB_REG_CARRIER_LOCK ( 355) /* noise power (24) */ #define DIB3000MB_REG_NOISE_POWER_MSB ( 372) #define DIB3000MB_REG_NOISE_POWER_LSB ( 373) #define DIB3000MB_REG_MOBILE_NOISE_MSB ( 374) #define DIB3000MB_REG_MOBILE_NOISE_LSB ( 375) /* * signal power (16), this and the above can be * used to calculate the signal/noise - ratio */ #define DIB3000MB_REG_SIGNAL_POWER ( 380) /* mer (24) */ #define DIB3000MB_REG_MER_MSB ( 381) #define DIB3000MB_REG_MER_LSB ( 382) /* * Transmission Parameter Signalling (TPS) * the following registers can be used to get TPS-information. * The values are according to the DVB-T standard. */ /* TPS locked (1) */ #define DIB3000MB_REG_TPS_LOCK ( 394) /* QAM from TPS (2) (values according to DIB3000MB_REG_QAM) */ #define DIB3000MB_REG_TPS_QAM ( 398) /* hierarchy from TPS (1) */ #define DIB3000MB_REG_TPS_HRCH ( 399) /* alpha from TPS (3) (values according to DIB3000MB_REG_VIT_ALPHA) */ #define DIB3000MB_REG_TPS_VIT_ALPHA ( 400) /* code rate high priority from TPS (3) (values according to DIB3000MB_FEC_*) */ #define DIB3000MB_REG_TPS_CODE_RATE_HP ( 401) /* code rate low priority from TPS (3) if DIB3000MB_REG_TPS_VIT_ALPHA */ #define DIB3000MB_REG_TPS_CODE_RATE_LP ( 402) /* guard time from TPS (2) (values according to DIB3000MB_REG_GUARD_TIME */ #define DIB3000MB_REG_TPS_GUARD_TIME ( 403) /* fft size from TPS (2) (values according to DIB3000MB_REG_FFT) */ #define DIB3000MB_REG_TPS_FFT ( 404) /* cell id from TPS (16) */ #define DIB3000MB_REG_TPS_CELL_ID ( 406) /* TPS (68) */ #define DIB3000MB_REG_TPS_1 ( 408) #define DIB3000MB_REG_TPS_2 ( 409) #define DIB3000MB_REG_TPS_3 ( 410) #define DIB3000MB_REG_TPS_4 ( 411) #define DIB3000MB_REG_TPS_5 ( 412) /* bit error rate (before RS correction) (21) */ #define DIB3000MB_REG_BER_MSB ( 414) #define DIB3000MB_REG_BER_LSB ( 415) /* packet error rate (uncorrected TS packets) (16) */ #define DIB3000MB_REG_PACKET_ERROR_RATE ( 417) /* uncorrected packet count (16) */ #define DIB3000MB_REG_UNC ( 420) /* viterbi locked (1) */ #define DIB3000MB_REG_VIT_LCK ( 421) /* viterbi inidcator (16) */ #define DIB3000MB_REG_VIT_INDICATOR ( 422) /* transport stream sync lock (1) */ #define DIB3000MB_REG_TS_SYNC_LOCK ( 423) /* transport stream RS lock (1) */ #define DIB3000MB_REG_TS_RS_LOCK ( 424) /* lock mask 0 value (1) */ #define DIB3000MB_REG_LOCK0_VALUE ( 425) /* lock mask 1 value (1) */ #define DIB3000MB_REG_LOCK1_VALUE ( 426) /* lock mask 2 value (1) */ #define DIB3000MB_REG_LOCK2_VALUE ( 427) /* interrupt pending for auto search */ #define DIB3000MB_REG_AS_IRQ_PENDING ( 434) #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1