| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Sakari Ailus | 14799 | 97.86% | 92 | 80.00% |
| Hans Verkuil | 73 | 0.48% | 2 | 1.74% |
| Laurent Pinchart | 66 | 0.44% | 3 | 2.61% |
| Pavel Machek | 43 | 0.28% | 1 | 0.87% |
| Ivaylo Dimitrov | 40 | 0.26% | 1 | 0.87% |
| Javier Martinez Canillas | 26 | 0.17% | 2 | 1.74% |
| Boris Brezillon | 16 | 0.11% | 1 | 0.87% |
| Christophe Jaillet | 11 | 0.07% | 1 | 0.87% |
| Andy Shevchenko | 9 | 0.06% | 1 | 0.87% |
| Mauro Carvalho Chehab | 8 | 0.05% | 3 | 2.61% |
| Dinghao Liu | 8 | 0.05% | 1 | 0.87% |
| Dan Carpenter | 6 | 0.04% | 1 | 0.87% |
| Ricardo Ribalda Delgado | 6 | 0.04% | 1 | 0.87% |
| Colin Ian King | 6 | 0.04% | 1 | 0.87% |
| Sachin Kamat | 2 | 0.01% | 1 | 0.87% |
| Thomas Gleixner | 2 | 0.01% | 1 | 0.87% |
| Luca Ceresoli | 1 | 0.01% | 1 | 0.87% |
| Kieran Bingham | 1 | 0.01% | 1 | 0.87% |
| Total | 15123 | 115 |
// SPDX-License-Identifier: GPL-2.0-only /* * drivers/media/i2c/smiapp/smiapp-core.c * * Generic driver for SMIA/SMIA++ compliant camera modules * * Copyright (C) 2010--2012 Nokia Corporation * Contact: Sakari Ailus <sakari.ailus@iki.fi> * * Based on smiapp driver by Vimarsh Zutshi * Based on jt8ev1.c by Vimarsh Zutshi * Based on smia-sensor.c by Tuukka Toivonen <tuukkat76@gmail.com> */ #include <linux/clk.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/gpio.h> #include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/pm_runtime.h> #include <linux/property.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/smiapp.h> #include <linux/v4l2-mediabus.h> #include <media/v4l2-fwnode.h> #include <media/v4l2-device.h> #include "smiapp.h" #define SMIAPP_ALIGN_DIM(dim, flags) \ ((flags) & V4L2_SEL_FLAG_GE \ ? ALIGN((dim), 2) \ : (dim) & ~1) /* * smiapp_module_idents - supported camera modules */ static const struct smiapp_module_ident smiapp_module_idents[] = { SMIAPP_IDENT_L(0x01, 0x022b, -1, "vs6555"), SMIAPP_IDENT_L(0x01, 0x022e, -1, "vw6558"), SMIAPP_IDENT_L(0x07, 0x7698, -1, "ovm7698"), SMIAPP_IDENT_L(0x0b, 0x4242, -1, "smiapp-003"), SMIAPP_IDENT_L(0x0c, 0x208a, -1, "tcm8330md"), SMIAPP_IDENT_LQ(0x0c, 0x2134, -1, "tcm8500md", &smiapp_tcm8500md_quirk), SMIAPP_IDENT_L(0x0c, 0x213e, -1, "et8en2"), SMIAPP_IDENT_L(0x0c, 0x2184, -1, "tcm8580md"), SMIAPP_IDENT_LQ(0x0c, 0x560f, -1, "jt8ew9", &smiapp_jt8ew9_quirk), SMIAPP_IDENT_LQ(0x10, 0x4141, -1, "jt8ev1", &smiapp_jt8ev1_quirk), SMIAPP_IDENT_LQ(0x10, 0x4241, -1, "imx125es", &smiapp_imx125es_quirk), }; /* * * Dynamic Capability Identification * */ static u32 smiapp_get_limit(struct smiapp_sensor *sensor, unsigned int limit) { if (WARN_ON(limit >= SMIAPP_LIMIT_LAST)) return 1; return sensor->limits[limit]; } #define SMIA_LIM(sensor, limit) \ smiapp_get_limit(sensor, SMIAPP_LIMIT_##limit) static int smiapp_read_all_smia_limits(struct smiapp_sensor *sensor) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); unsigned int i; int rval; for (i = 0; i < SMIAPP_LIMIT_LAST; i++) { u32 val; rval = smiapp_read( sensor, smiapp_reg_limits[i].addr, &val); if (rval) return rval; sensor->limits[i] = val; dev_dbg(&client->dev, "0x%8.8x \"%s\" = %u, 0x%x\n", smiapp_reg_limits[i].addr, smiapp_reg_limits[i].what, val, val); } if (SMIA_LIM(sensor, SCALER_N_MIN) == 0) smiapp_replace_limit(sensor, SMIAPP_LIMIT_SCALER_N_MIN, 16); return 0; } static int smiapp_read_frame_fmt(struct smiapp_sensor *sensor) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); u32 fmt_model_type, fmt_model_subtype, ncol_desc, nrow_desc; unsigned int i; int pixel_count = 0; int line_count = 0; int rval; rval = smiapp_read(sensor, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_TYPE, &fmt_model_type); if (rval) return rval; rval = smiapp_read(sensor, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_SUBTYPE, &fmt_model_subtype); if (rval) return rval; ncol_desc = (fmt_model_subtype & SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_MASK) >> SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_SHIFT; nrow_desc = fmt_model_subtype & SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NROWS_MASK; dev_dbg(&client->dev, "format_model_type %s\n", fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE ? "2 byte" : fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE ? "4 byte" : "is simply bad"); for (i = 0; i < ncol_desc + nrow_desc; i++) { u32 desc; u32 pixelcode; u32 pixels; char *which; char *what; u32 reg; if (fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE) { reg = SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(i); rval = smiapp_read(sensor, reg, &desc); if (rval) return rval; pixelcode = (desc & SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_MASK) >> SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_SHIFT; pixels = desc & SMIAPP_FRAME_FORMAT_DESC_2_PIXELS_MASK; } else if (fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE) { reg = SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(i); rval = smiapp_read(sensor, reg, &desc); if (rval) return rval; pixelcode = (desc & SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_MASK) >> SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_SHIFT; pixels = desc & SMIAPP_FRAME_FORMAT_DESC_4_PIXELS_MASK; } else { dev_dbg(&client->dev, "invalid frame format model type %d\n", fmt_model_type); return -EINVAL; } if (i < ncol_desc) which = "columns"; else which = "rows"; switch (pixelcode) { case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED: what = "embedded"; break; case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DUMMY: what = "dummy"; break; case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_BLACK: what = "black"; break; case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DARK: what = "dark"; break; case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE: what = "visible"; break; default: what = "invalid"; break; } dev_dbg(&client->dev, "0x%8.8x %s pixels: %d %s (pixelcode %u)\n", reg, what, pixels, which, pixelcode); if (i < ncol_desc) { if (pixelcode == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE) sensor->visible_pixel_start = pixel_count; pixel_count += pixels; continue; } /* Handle row descriptors */ switch (pixelcode) { case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED: if (sensor->embedded_end) break; sensor->embedded_start = line_count; sensor->embedded_end = line_count + pixels; break; case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE: sensor->image_start = line_count; break; } line_count += pixels; } if (sensor->embedded_end > sensor->image_start) { dev_dbg(&client->dev, "adjusting image start line to %u (was %u)\n", sensor->embedded_end, sensor->image_start); sensor->image_start = sensor->embedded_end; } dev_dbg(&client->dev, "embedded data from lines %d to %d\n", sensor->embedded_start, sensor->embedded_end); dev_dbg(&client->dev, "image data starts at line %d\n", sensor->image_start); return 0; } static int smiapp_pll_configure(struct smiapp_sensor *sensor) { struct smiapp_pll *pll = &sensor->pll; int rval; rval = smiapp_write( sensor, SMIAPP_REG_U16_VT_PIX_CLK_DIV, pll->vt.pix_clk_div); if (rval < 0) return rval; rval = smiapp_write( sensor, SMIAPP_REG_U16_VT_SYS_CLK_DIV, pll->vt.sys_clk_div); if (rval < 0) return rval; rval = smiapp_write( sensor, SMIAPP_REG_U16_PRE_PLL_CLK_DIV, pll->pre_pll_clk_div); if (rval < 0) return rval; rval = smiapp_write( sensor, SMIAPP_REG_U16_PLL_MULTIPLIER, pll->pll_multiplier); if (rval < 0) return rval; /* Lane op clock ratio does not apply here. */ rval = smiapp_write( sensor, SMIAPP_REG_U32_REQUESTED_LINK_BIT_RATE_MBPS, DIV_ROUND_UP(pll->op.sys_clk_freq_hz, 1000000 / 256 / 256)); if (rval < 0 || sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0) return rval; rval = smiapp_write( sensor, SMIAPP_REG_U16_OP_PIX_CLK_DIV, pll->op.pix_clk_div); if (rval < 0) return rval; return smiapp_write( sensor, SMIAPP_REG_U16_OP_SYS_CLK_DIV, pll->op.sys_clk_div); } static int smiapp_pll_try(struct smiapp_sensor *sensor, struct smiapp_pll *pll) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); struct smiapp_pll_limits lim = { .min_pre_pll_clk_div = SMIA_LIM(sensor, MIN_PRE_PLL_CLK_DIV), .max_pre_pll_clk_div = SMIA_LIM(sensor, MAX_PRE_PLL_CLK_DIV), .min_pll_ip_freq_hz = SMIA_LIM(sensor, MIN_PLL_IP_FREQ_HZ), .max_pll_ip_freq_hz = SMIA_LIM(sensor, MAX_PLL_IP_FREQ_HZ), .min_pll_multiplier = SMIA_LIM(sensor, MIN_PLL_MULTIPLIER), .max_pll_multiplier = SMIA_LIM(sensor, MAX_PLL_MULTIPLIER), .min_pll_op_freq_hz = SMIA_LIM(sensor, MIN_PLL_OP_FREQ_HZ), .max_pll_op_freq_hz = SMIA_LIM(sensor, MAX_PLL_OP_FREQ_HZ), .op.min_sys_clk_div = SMIA_LIM(sensor, MIN_OP_SYS_CLK_DIV), .op.max_sys_clk_div = SMIA_LIM(sensor, MAX_OP_SYS_CLK_DIV), .op.min_pix_clk_div = SMIA_LIM(sensor, MIN_OP_PIX_CLK_DIV), .op.max_pix_clk_div = SMIA_LIM(sensor, MAX_OP_PIX_CLK_DIV), .op.min_sys_clk_freq_hz = SMIA_LIM(sensor, MIN_OP_SYS_CLK_FREQ_HZ), .op.max_sys_clk_freq_hz = SMIA_LIM(sensor, MAX_OP_SYS_CLK_FREQ_HZ), .op.min_pix_clk_freq_hz = SMIA_LIM(sensor, MIN_OP_PIX_CLK_FREQ_HZ), .op.max_pix_clk_freq_hz = SMIA_LIM(sensor, MAX_OP_PIX_CLK_FREQ_HZ), .vt.min_sys_clk_div = SMIA_LIM(sensor, MIN_VT_SYS_CLK_DIV), .vt.max_sys_clk_div = SMIA_LIM(sensor, MAX_VT_SYS_CLK_DIV), .vt.min_pix_clk_div = SMIA_LIM(sensor, MIN_VT_PIX_CLK_DIV), .vt.max_pix_clk_div = SMIA_LIM(sensor, MAX_VT_PIX_CLK_DIV), .vt.min_sys_clk_freq_hz = SMIA_LIM(sensor, MIN_VT_SYS_CLK_FREQ_HZ), .vt.max_sys_clk_freq_hz = SMIA_LIM(sensor, MAX_VT_SYS_CLK_FREQ_HZ), .vt.min_pix_clk_freq_hz = SMIA_LIM(sensor, MIN_VT_PIX_CLK_FREQ_HZ), .vt.max_pix_clk_freq_hz = SMIA_LIM(sensor, MAX_VT_PIX_CLK_FREQ_HZ), .min_line_length_pck_bin = SMIA_LIM(sensor, MIN_LINE_LENGTH_PCK_BIN), .min_line_length_pck = SMIA_LIM(sensor, MIN_LINE_LENGTH_PCK), }; return smiapp_pll_calculate(&client->dev, &lim, pll); } static int smiapp_pll_update(struct smiapp_sensor *sensor) { struct smiapp_pll *pll = &sensor->pll; int rval; pll->binning_horizontal = sensor->binning_horizontal; pll->binning_vertical = sensor->binning_vertical; pll->link_freq = sensor->link_freq->qmenu_int[sensor->link_freq->val]; pll->scale_m = sensor->scale_m; pll->bits_per_pixel = sensor->csi_format->compressed; rval = smiapp_pll_try(sensor, pll); if (rval < 0) return rval; __v4l2_ctrl_s_ctrl_int64(sensor->pixel_rate_parray, pll->pixel_rate_pixel_array); __v4l2_ctrl_s_ctrl_int64(sensor->pixel_rate_csi, pll->pixel_rate_csi); return 0; } /* * * V4L2 Controls handling * */ static void __smiapp_update_exposure_limits(struct smiapp_sensor *sensor) { struct v4l2_ctrl *ctrl = sensor->exposure; int max; max = sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height + sensor->vblank->val - SMIA_LIM(sensor, COARSE_INTEGRATION_TIME_MAX_MARGIN); __v4l2_ctrl_modify_range(ctrl, ctrl->minimum, max, ctrl->step, max); } /* * Order matters. * * 1. Bits-per-pixel, descending. * 2. Bits-per-pixel compressed, descending. * 3. Pixel order, same as in pixel_order_str. Formats for all four pixel * orders must be defined. */ static const struct smiapp_csi_data_format smiapp_csi_data_formats[] = { { MEDIA_BUS_FMT_SGRBG16_1X16, 16, 16, SMIAPP_PIXEL_ORDER_GRBG, }, { MEDIA_BUS_FMT_SRGGB16_1X16, 16, 16, SMIAPP_PIXEL_ORDER_RGGB, }, { MEDIA_BUS_FMT_SBGGR16_1X16, 16, 16, SMIAPP_PIXEL_ORDER_BGGR, }, { MEDIA_BUS_FMT_SGBRG16_1X16, 16, 16, SMIAPP_PIXEL_ORDER_GBRG, }, { MEDIA_BUS_FMT_SGRBG14_1X14, 14, 14, SMIAPP_PIXEL_ORDER_GRBG, }, { MEDIA_BUS_FMT_SRGGB14_1X14, 14, 14, SMIAPP_PIXEL_ORDER_RGGB, }, { MEDIA_BUS_FMT_SBGGR14_1X14, 14, 14, SMIAPP_PIXEL_ORDER_BGGR, }, { MEDIA_BUS_FMT_SGBRG14_1X14, 14, 14, SMIAPP_PIXEL_ORDER_GBRG, }, { MEDIA_BUS_FMT_SGRBG12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_GRBG, }, { MEDIA_BUS_FMT_SRGGB12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_RGGB, }, { MEDIA_BUS_FMT_SBGGR12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_BGGR, }, { MEDIA_BUS_FMT_SGBRG12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_GBRG, }, { MEDIA_BUS_FMT_SGRBG10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_GRBG, }, { MEDIA_BUS_FMT_SRGGB10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_RGGB, }, { MEDIA_BUS_FMT_SBGGR10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_BGGR, }, { MEDIA_BUS_FMT_SGBRG10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_GBRG, }, { MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_GRBG, }, { MEDIA_BUS_FMT_SRGGB10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_RGGB, }, { MEDIA_BUS_FMT_SBGGR10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_BGGR, }, { MEDIA_BUS_FMT_SGBRG10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_GBRG, }, { MEDIA_BUS_FMT_SGRBG8_1X8, 8, 8, SMIAPP_PIXEL_ORDER_GRBG, }, { MEDIA_BUS_FMT_SRGGB8_1X8, 8, 8, SMIAPP_PIXEL_ORDER_RGGB, }, { MEDIA_BUS_FMT_SBGGR8_1X8, 8, 8, SMIAPP_PIXEL_ORDER_BGGR, }, { MEDIA_BUS_FMT_SGBRG8_1X8, 8, 8, SMIAPP_PIXEL_ORDER_GBRG, }, }; static const char *pixel_order_str[] = { "GRBG", "RGGB", "BGGR", "GBRG" }; #define to_csi_format_idx(fmt) (((unsigned long)(fmt) \ - (unsigned long)smiapp_csi_data_formats) \ / sizeof(*smiapp_csi_data_formats)) static u32 smiapp_pixel_order(struct smiapp_sensor *sensor) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); int flip = 0; if (sensor->hflip) { if (sensor->hflip->val) flip |= SMIAPP_IMAGE_ORIENTATION_HFLIP; if (sensor->vflip->val) flip |= SMIAPP_IMAGE_ORIENTATION_VFLIP; } flip ^= sensor->hvflip_inv_mask; dev_dbg(&client->dev, "flip %d\n", flip); return sensor->default_pixel_order ^ flip; } static void smiapp_update_mbus_formats(struct smiapp_sensor *sensor) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); unsigned int csi_format_idx = to_csi_format_idx(sensor->csi_format) & ~3; unsigned int internal_csi_format_idx = to_csi_format_idx(sensor->internal_csi_format) & ~3; unsigned int pixel_order = smiapp_pixel_order(sensor); sensor->mbus_frame_fmts = sensor->default_mbus_frame_fmts << pixel_order; sensor->csi_format = &smiapp_csi_data_formats[csi_format_idx + pixel_order]; sensor->internal_csi_format = &smiapp_csi_data_formats[internal_csi_format_idx + pixel_order]; BUG_ON(max(internal_csi_format_idx, csi_format_idx) + pixel_order >= ARRAY_SIZE(smiapp_csi_data_formats)); dev_dbg(&client->dev, "new pixel order %s\n", pixel_order_str[pixel_order]); } static const char * const smiapp_test_patterns[] = { "Disabled", "Solid Colour", "Eight Vertical Colour Bars", "Colour Bars With Fade to Grey", "Pseudorandom Sequence (PN9)", }; static int smiapp_set_ctrl(struct v4l2_ctrl *ctrl) { struct smiapp_sensor *sensor = container_of(ctrl->handler, struct smiapp_subdev, ctrl_handler) ->sensor; struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); int pm_status; u32 orient = 0; unsigned int i; int exposure; int rval; switch (ctrl->id) { case V4L2_CID_HFLIP: case V4L2_CID_VFLIP: if (sensor->streaming) return -EBUSY; if (sensor->hflip->val) orient |= SMIAPP_IMAGE_ORIENTATION_HFLIP; if (sensor->vflip->val) orient |= SMIAPP_IMAGE_ORIENTATION_VFLIP; orient ^= sensor->hvflip_inv_mask; smiapp_update_mbus_formats(sensor); break; case V4L2_CID_VBLANK: exposure = sensor->exposure->val; __smiapp_update_exposure_limits(sensor); if (exposure > sensor->exposure->maximum) { sensor->exposure->val = sensor->exposure->maximum; rval = smiapp_set_ctrl(sensor->exposure); if (rval < 0) return rval; } break; case V4L2_CID_LINK_FREQ: if (sensor->streaming) return -EBUSY; rval = smiapp_pll_update(sensor); if (rval) return rval; return 0; case V4L2_CID_TEST_PATTERN: for (i = 0; i < ARRAY_SIZE(sensor->test_data); i++) v4l2_ctrl_activate( sensor->test_data[i], ctrl->val == V4L2_SMIAPP_TEST_PATTERN_MODE_SOLID_COLOUR); break; } pm_status = pm_runtime_get_if_active(&client->dev, true); if (!pm_status) return 0; switch (ctrl->id) { case V4L2_CID_ANALOGUE_GAIN: rval = smiapp_write( sensor, SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GLOBAL, ctrl->val); break; case V4L2_CID_EXPOSURE: rval = smiapp_write( sensor, SMIAPP_REG_U16_COARSE_INTEGRATION_TIME, ctrl->val); break; case V4L2_CID_HFLIP: case V4L2_CID_VFLIP: rval = smiapp_write(sensor, SMIAPP_REG_U8_IMAGE_ORIENTATION, orient); break; case V4L2_CID_VBLANK: rval = smiapp_write( sensor, SMIAPP_REG_U16_FRAME_LENGTH_LINES, sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height + ctrl->val); break; case V4L2_CID_HBLANK: rval = smiapp_write( sensor, SMIAPP_REG_U16_LINE_LENGTH_PCK, sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width + ctrl->val); break; case V4L2_CID_TEST_PATTERN: rval = smiapp_write( sensor, SMIAPP_REG_U16_TEST_PATTERN_MODE, ctrl->val); break; case V4L2_CID_TEST_PATTERN_RED: rval = smiapp_write( sensor, SMIAPP_REG_U16_TEST_DATA_RED, ctrl->val); break; case V4L2_CID_TEST_PATTERN_GREENR: rval = smiapp_write( sensor, SMIAPP_REG_U16_TEST_DATA_GREENR, ctrl->val); break; case V4L2_CID_TEST_PATTERN_BLUE: rval = smiapp_write( sensor, SMIAPP_REG_U16_TEST_DATA_BLUE, ctrl->val); break; case V4L2_CID_TEST_PATTERN_GREENB: rval = smiapp_write( sensor, SMIAPP_REG_U16_TEST_DATA_GREENB, ctrl->val); break; case V4L2_CID_PIXEL_RATE: /* For v4l2_ctrl_s_ctrl_int64() used internally. */ rval = 0; break; default: rval = -EINVAL; } if (pm_status > 0) { pm_runtime_mark_last_busy(&client->dev); pm_runtime_put_autosuspend(&client->dev); } return rval; } static const struct v4l2_ctrl_ops smiapp_ctrl_ops = { .s_ctrl = smiapp_set_ctrl, }; static int smiapp_init_controls(struct smiapp_sensor *sensor) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); int rval; rval = v4l2_ctrl_handler_init(&sensor->pixel_array->ctrl_handler, 12); if (rval) return rval; sensor->pixel_array->ctrl_handler.lock = &sensor->mutex; sensor->analog_gain = v4l2_ctrl_new_std( &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, V4L2_CID_ANALOGUE_GAIN, SMIA_LIM(sensor, ANALOGUE_GAIN_CODE_MIN), SMIA_LIM(sensor, ANALOGUE_GAIN_CODE_MAX), max(SMIA_LIM(sensor, ANALOGUE_GAIN_CODE_STEP), 1U), SMIA_LIM(sensor, ANALOGUE_GAIN_CODE_MIN)); /* Exposure limits will be updated soon, use just something here. */ sensor->exposure = v4l2_ctrl_new_std( &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, V4L2_CID_EXPOSURE, 0, 0, 1, 0); sensor->hflip = v4l2_ctrl_new_std( &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, V4L2_CID_HFLIP, 0, 1, 1, 0); sensor->vflip = v4l2_ctrl_new_std( &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0); sensor->vblank = v4l2_ctrl_new_std( &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, V4L2_CID_VBLANK, 0, 1, 1, 0); if (sensor->vblank) sensor->vblank->flags |= V4L2_CTRL_FLAG_UPDATE; sensor->hblank = v4l2_ctrl_new_std( &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, V4L2_CID_HBLANK, 0, 1, 1, 0); if (sensor->hblank) sensor->hblank->flags |= V4L2_CTRL_FLAG_UPDATE; sensor->pixel_rate_parray = v4l2_ctrl_new_std( &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, V4L2_CID_PIXEL_RATE, 1, INT_MAX, 1, 1); v4l2_ctrl_new_std_menu_items(&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, V4L2_CID_TEST_PATTERN, ARRAY_SIZE(smiapp_test_patterns) - 1, 0, 0, smiapp_test_patterns); if (sensor->pixel_array->ctrl_handler.error) { dev_err(&client->dev, "pixel array controls initialization failed (%d)\n", sensor->pixel_array->ctrl_handler.error); return sensor->pixel_array->ctrl_handler.error; } sensor->pixel_array->sd.ctrl_handler = &sensor->pixel_array->ctrl_handler; v4l2_ctrl_cluster(2, &sensor->hflip); rval = v4l2_ctrl_handler_init(&sensor->src->ctrl_handler, 0); if (rval) return rval; sensor->src->ctrl_handler.lock = &sensor->mutex; sensor->pixel_rate_csi = v4l2_ctrl_new_std( &sensor->src->ctrl_handler, &smiapp_ctrl_ops, V4L2_CID_PIXEL_RATE, 1, INT_MAX, 1, 1); if (sensor->src->ctrl_handler.error) { dev_err(&client->dev, "src controls initialization failed (%d)\n", sensor->src->ctrl_handler.error); return sensor->src->ctrl_handler.error; } sensor->src->sd.ctrl_handler = &sensor->src->ctrl_handler; return 0; } /* * For controls that require information on available media bus codes * and linke frequencies. */ static int smiapp_init_late_controls(struct smiapp_sensor *sensor) { unsigned long *valid_link_freqs = &sensor->valid_link_freqs[ sensor->csi_format->compressed - sensor->compressed_min_bpp]; unsigned int i; for (i = 0; i < ARRAY_SIZE(sensor->test_data); i++) { int max_value = (1 << sensor->csi_format->width) - 1; sensor->test_data[i] = v4l2_ctrl_new_std( &sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops, V4L2_CID_TEST_PATTERN_RED + i, 0, max_value, 1, max_value); } sensor->link_freq = v4l2_ctrl_new_int_menu( &sensor->src->ctrl_handler, &smiapp_ctrl_ops, V4L2_CID_LINK_FREQ, __fls(*valid_link_freqs), __ffs(*valid_link_freqs), sensor->hwcfg->op_sys_clock); return sensor->src->ctrl_handler.error; } static void smiapp_free_controls(struct smiapp_sensor *sensor) { unsigned int i; for (i = 0; i < sensor->ssds_used; i++) v4l2_ctrl_handler_free(&sensor->ssds[i].ctrl_handler); } static int smiapp_get_mbus_formats(struct smiapp_sensor *sensor) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); struct smiapp_pll *pll = &sensor->pll; u8 compressed_max_bpp = 0; unsigned int type, n; unsigned int i, pixel_order; int rval; rval = smiapp_read( sensor, SMIAPP_REG_U8_DATA_FORMAT_MODEL_TYPE, &type); if (rval) return rval; dev_dbg(&client->dev, "data_format_model_type %d\n", type); rval = smiapp_read(sensor, SMIAPP_REG_U8_PIXEL_ORDER, &pixel_order); if (rval) return rval; if (pixel_order >= ARRAY_SIZE(pixel_order_str)) { dev_dbg(&client->dev, "bad pixel order %d\n", pixel_order); return -EINVAL; } dev_dbg(&client->dev, "pixel order %d (%s)\n", pixel_order, pixel_order_str[pixel_order]); switch (type) { case SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL: n = SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL_N; break; case SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED: n = SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED_N; break; default: return -EINVAL; } sensor->default_pixel_order = pixel_order; sensor->mbus_frame_fmts = 0; for (i = 0; i < n; i++) { unsigned int fmt, j; rval = smiapp_read( sensor, SMIAPP_REG_U16_DATA_FORMAT_DESCRIPTOR(i), &fmt); if (rval) return rval; dev_dbg(&client->dev, "%u: bpp %u, compressed %u\n", i, fmt >> 8, (u8)fmt); for (j = 0; j < ARRAY_SIZE(smiapp_csi_data_formats); j++) { const struct smiapp_csi_data_format *f = &smiapp_csi_data_formats[j]; if (f->pixel_order != SMIAPP_PIXEL_ORDER_GRBG) continue; if (f->width != fmt >> 8 || f->compressed != (u8)fmt) continue; dev_dbg(&client->dev, "jolly good! %d\n", j); sensor->default_mbus_frame_fmts |= 1 << j; } } /* Figure out which BPP values can be used with which formats. */ pll->binning_horizontal = 1; pll->binning_vertical = 1; pll->scale_m = sensor->scale_m; for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) { sensor->compressed_min_bpp = min(smiapp_csi_data_formats[i].compressed, sensor->compressed_min_bpp); compressed_max_bpp = max(smiapp_csi_data_formats[i].compressed, compressed_max_bpp); } sensor->valid_link_freqs = devm_kcalloc( &client->dev, compressed_max_bpp - sensor->compressed_min_bpp + 1, sizeof(*sensor->valid_link_freqs), GFP_KERNEL); if (!sensor->valid_link_freqs) return -ENOMEM; for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) { const struct smiapp_csi_data_format *f = &smiapp_csi_data_formats[i]; unsigned long *valid_link_freqs = &sensor->valid_link_freqs[ f->compressed - sensor->compressed_min_bpp]; unsigned int j; if (!(sensor->default_mbus_frame_fmts & 1 << i)) continue; pll->bits_per_pixel = f->compressed; for (j = 0; sensor->hwcfg->op_sys_clock[j]; j++) { pll->link_freq = sensor->hwcfg->op_sys_clock[j]; rval = smiapp_pll_try(sensor, pll); dev_dbg(&client->dev, "link freq %u Hz, bpp %u %s\n", pll->link_freq, pll->bits_per_pixel, rval ? "not ok" : "ok"); if (rval) continue; set_bit(j, valid_link_freqs); } if (!*valid_link_freqs) { dev_info(&client->dev, "no valid link frequencies for %u bpp\n", f->compressed); sensor->default_mbus_frame_fmts &= ~BIT(i); continue; } if (!sensor->csi_format || f->width > sensor->csi_format->width || (f->width == sensor->csi_format->width && f->compressed > sensor->csi_format->compressed)) { sensor->csi_format = f; sensor->internal_csi_format = f; } } if (!sensor->csi_format) { dev_err(&client->dev, "no supported mbus code found\n"); return -EINVAL; } smiapp_update_mbus_formats(sensor); return 0; } static void smiapp_update_blanking(struct smiapp_sensor *sensor) { struct v4l2_ctrl *vblank = sensor->vblank; struct v4l2_ctrl *hblank = sensor->hblank; uint16_t min_fll, max_fll, min_llp, max_llp, min_lbp; int min, max; if (sensor->binning_vertical > 1 || sensor->binning_horizontal > 1) { min_fll = SMIA_LIM(sensor, MIN_FRAME_LENGTH_LINES_BIN); max_fll = SMIA_LIM(sensor, MAX_FRAME_LENGTH_LINES_BIN); min_llp = SMIA_LIM(sensor, MIN_LINE_LENGTH_PCK_BIN); max_llp = SMIA_LIM(sensor, MAX_LINE_LENGTH_PCK_BIN); min_lbp = SMIA_LIM(sensor, MIN_LINE_BLANKING_PCK_BIN); } else { min_fll = SMIA_LIM(sensor, MIN_FRAME_LENGTH_LINES); max_fll = SMIA_LIM(sensor, MAX_FRAME_LENGTH_LINES); min_llp = SMIA_LIM(sensor, MIN_LINE_LENGTH_PCK); max_llp = SMIA_LIM(sensor, MAX_LINE_LENGTH_PCK); min_lbp = SMIA_LIM(sensor, MIN_LINE_BLANKING_PCK); } min = max_t(int, SMIA_LIM(sensor, MIN_FRAME_BLANKING_LINES), min_fll - sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height); max = max_fll - sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height; __v4l2_ctrl_modify_range(vblank, min, max, vblank->step, min); min = max_t(int, min_llp - sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width, min_lbp); max = max_llp - sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width; __v4l2_ctrl_modify_range(hblank, min, max, hblank->step, min); __smiapp_update_exposure_limits(sensor); } static int smiapp_pll_blanking_update(struct smiapp_sensor *sensor) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); int rval; rval = smiapp_pll_update(sensor); if (rval < 0) return rval; /* Output from pixel array, including blanking */ smiapp_update_blanking(sensor); dev_dbg(&client->dev, "vblank\t\t%d\n", sensor->vblank->val); dev_dbg(&client->dev, "hblank\t\t%d\n", sensor->hblank->val); dev_dbg(&client->dev, "real timeperframe\t100/%d\n", sensor->pll.pixel_rate_pixel_array / ((sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width + sensor->hblank->val) * (sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height + sensor->vblank->val) / 100)); return 0; } /* * * SMIA++ NVM handling * */ static int smiapp_read_nvm_page(struct smiapp_sensor *sensor, u32 p, u8 *nvm, u8 *status) { unsigned int i; int rval; u32 s; *status = 0; rval = smiapp_write(sensor, SMIAPP_REG_U8_DATA_TRANSFER_IF_1_PAGE_SELECT, p); if (rval) return rval; rval = smiapp_write(sensor, SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL, SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN); if (rval) return rval; rval = smiapp_read(sensor, SMIAPP_REG_U8_DATA_TRANSFER_IF_1_STATUS, &s); if (rval) return rval; if (s & SMIAPP_DATA_TRANSFER_IF_1_STATUS_EUSAGE) { *status = s; return -ENODATA; } if (SMIA_LIM(sensor, DATA_TRANSFER_IF_CAPABILITY) & SMIAPP_DATA_TRANSFER_IF_CAPABILITY_POLL) { for (i = 1000; i > 0; i--) { if (s & SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY) break; rval = smiapp_read( sensor, SMIAPP_REG_U8_DATA_TRANSFER_IF_1_STATUS, &s); if (rval) return rval; } if (!i) return -ETIMEDOUT; } for (i = 0; i < SMIAPP_NVM_PAGE_SIZE; i++) { u32 v; rval = smiapp_read(sensor, SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_0 + i, &v); if (rval) return rval; *nvm++ = v; } return 0; } static int smiapp_read_nvm(struct smiapp_sensor *sensor, unsigned char *nvm, size_t nvm_size) { u8 status = 0; u32 p; int rval = 0, rval2; for (p = 0; p < nvm_size / SMIAPP_NVM_PAGE_SIZE && !rval; p++) { rval = smiapp_read_nvm_page(sensor, p, nvm, &status); nvm += SMIAPP_NVM_PAGE_SIZE; } if (rval == -ENODATA && status & SMIAPP_DATA_TRANSFER_IF_1_STATUS_EUSAGE) rval = 0; rval2 = smiapp_write(sensor, SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL, 0); if (rval < 0) return rval; else return rval2 ?: p * SMIAPP_NVM_PAGE_SIZE; } /* * * SMIA++ CCI address control * */ static int smiapp_change_cci_addr(struct smiapp_sensor *sensor) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); int rval; u32 val; client->addr = sensor->hwcfg->i2c_addr_dfl; rval = smiapp_write(sensor, SMIAPP_REG_U8_CCI_ADDRESS_CONTROL, sensor->hwcfg->i2c_addr_alt << 1); if (rval) return rval; client->addr = sensor->hwcfg->i2c_addr_alt; /* verify addr change went ok */ rval = smiapp_read(sensor, SMIAPP_REG_U8_CCI_ADDRESS_CONTROL, &val); if (rval) return rval; if (val != sensor->hwcfg->i2c_addr_alt << 1) return -ENODEV; return 0; } /* * * SMIA++ Mode Control * */ static int smiapp_setup_flash_strobe(struct smiapp_sensor *sensor) { struct smiapp_flash_strobe_parms *strobe_setup; unsigned int ext_freq = sensor->hwcfg->ext_clk; u32 tmp; u32 strobe_adjustment; u32 strobe_width_high_rs; int rval; strobe_setup = sensor->hwcfg->strobe_setup; /* * How to calculate registers related to strobe length. Please * do not change, or if you do at least know what you're * doing. :-) * * Sakari Ailus <sakari.ailus@iki.fi> 2010-10-25 * * flash_strobe_length [us] / 10^6 = (tFlash_strobe_width_ctrl * / EXTCLK freq [Hz]) * flash_strobe_adjustment * * tFlash_strobe_width_ctrl E N, [1 - 0xffff] * flash_strobe_adjustment E N, [1 - 0xff] * * The formula above is written as below to keep it on one * line: * * l / 10^6 = w / e * a * * Let's mark w * a by x: * * x = w * a * * Thus, we get: * * x = l * e / 10^6 * * The strobe width must be at least as long as requested, * thus rounding upwards is needed. * * x = (l * e + 10^6 - 1) / 10^6 * ----------------------------- * * Maximum possible accuracy is wanted at all times. Thus keep * a as small as possible. * * Calculate a, assuming maximum w, with rounding upwards: * * a = (x + (2^16 - 1) - 1) / (2^16 - 1) * ------------------------------------- * * Thus, we also get w, with that a, with rounding upwards: * * w = (x + a - 1) / a * ------------------- * * To get limits: * * x E [1, (2^16 - 1) * (2^8 - 1)] * * Substituting maximum x to the original formula (with rounding), * the maximum l is thus * * (2^16 - 1) * (2^8 - 1) * 10^6 = l * e + 10^6 - 1 * * l = (10^6 * (2^16 - 1) * (2^8 - 1) - 10^6 + 1) / e * -------------------------------------------------- * * flash_strobe_length must be clamped between 1 and * (10^6 * (2^16 - 1) * (2^8 - 1) - 10^6 + 1) / EXTCLK freq. * * Then, * * flash_strobe_adjustment = ((flash_strobe_length * * EXTCLK freq + 10^6 - 1) / 10^6 + (2^16 - 1) - 1) / (2^16 - 1) * * tFlash_strobe_width_ctrl = ((flash_strobe_length * * EXTCLK freq + 10^6 - 1) / 10^6 + * flash_strobe_adjustment - 1) / flash_strobe_adjustment */ tmp = div_u64(1000000ULL * ((1 << 16) - 1) * ((1 << 8) - 1) - 1000000 + 1, ext_freq); strobe_setup->strobe_width_high_us = clamp_t(u32, strobe_setup->strobe_width_high_us, 1, tmp); tmp = div_u64(((u64)strobe_setup->strobe_width_high_us * (u64)ext_freq + 1000000 - 1), 1000000ULL); strobe_adjustment = (tmp + (1 << 16) - 1 - 1) / ((1 << 16) - 1); strobe_width_high_rs = (tmp + strobe_adjustment - 1) / strobe_adjustment; rval = smiapp_write(sensor, SMIAPP_REG_U8_FLASH_MODE_RS, strobe_setup->mode); if (rval < 0) goto out; rval = smiapp_write(sensor, SMIAPP_REG_U8_FLASH_STROBE_ADJUSTMENT, strobe_adjustment); if (rval < 0) goto out; rval = smiapp_write( sensor, SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_RS_CTRL, strobe_width_high_rs); if (rval < 0) goto out; rval = smiapp_write(sensor, SMIAPP_REG_U16_TFLASH_STROBE_DELAY_RS_CTRL, strobe_setup->strobe_delay); if (rval < 0) goto out; rval = smiapp_write(sensor, SMIAPP_REG_U16_FLASH_STROBE_START_POINT, strobe_setup->stobe_start_point); if (rval < 0) goto out; rval = smiapp_write(sensor, SMIAPP_REG_U8_FLASH_TRIGGER_RS, strobe_setup->trigger); out: sensor->hwcfg->strobe_setup->trigger = 0; return rval; } /* ----------------------------------------------------------------------------- * Power management */ static int smiapp_power_on(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct v4l2_subdev *subdev = i2c_get_clientdata(client); struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); /* * The sub-device related to the I2C device is always the * source one, i.e. ssds[0]. */ struct smiapp_sensor *sensor = container_of(ssd, struct smiapp_sensor, ssds[0]); unsigned int sleep; int rval; rval = regulator_enable(sensor->vana); if (rval) { dev_err(&client->dev, "failed to enable vana regulator\n"); return rval; } usleep_range(1000, 1000); rval = clk_prepare_enable(sensor->ext_clk); if (rval < 0) { dev_dbg(&client->dev, "failed to enable xclk\n"); goto out_xclk_fail; } usleep_range(1000, 1000); gpiod_set_value(sensor->xshutdown, 1); sleep = SMIAPP_RESET_DELAY(sensor->hwcfg->ext_clk); usleep_range(sleep, sleep); /* * Failures to respond to the address change command have been noticed. * Those failures seem to be caused by the sensor requiring a longer * boot time than advertised. An additional 10ms delay seems to work * around the issue, but the SMIA++ I2C write retry hack makes the delay * unnecessary. The failures need to be investigated to find a proper * fix, and a delay will likely need to be added here if the I2C write * retry hack is reverted before the root cause of the boot time issue * is found. */ if (sensor->hwcfg->i2c_addr_alt) { rval = smiapp_change_cci_addr(sensor); if (rval) { dev_err(&client->dev, "cci address change error\n"); goto out_cci_addr_fail; } } rval = smiapp_write(sensor, SMIAPP_REG_U8_SOFTWARE_RESET, SMIAPP_SOFTWARE_RESET); if (rval < 0) { dev_err(&client->dev, "software reset failed\n"); goto out_cci_addr_fail; } if (sensor->hwcfg->i2c_addr_alt) { rval = smiapp_change_cci_addr(sensor); if (rval) { dev_err(&client->dev, "cci address change error\n"); goto out_cci_addr_fail; } } rval = smiapp_write(sensor, SMIAPP_REG_U16_COMPRESSION_MODE, SMIAPP_COMPRESSION_MODE_SIMPLE_PREDICTOR); if (rval) { dev_err(&client->dev, "compression mode set failed\n"); goto out_cci_addr_fail; } rval = smiapp_write( sensor, SMIAPP_REG_U16_EXTCLK_FREQUENCY_MHZ, sensor->hwcfg->ext_clk / (1000000 / (1 << 8))); if (rval) { dev_err(&client->dev, "extclk frequency set failed\n"); goto out_cci_addr_fail; } rval = smiapp_write(sensor, SMIAPP_REG_U8_CSI_LANE_MODE, sensor->hwcfg->lanes - 1); if (rval) { dev_err(&client->dev, "csi lane mode set failed\n"); goto out_cci_addr_fail; } rval = smiapp_write(sensor, SMIAPP_REG_U8_FAST_STANDBY_CTRL, SMIAPP_FAST_STANDBY_CTRL_IMMEDIATE); if (rval) { dev_err(&client->dev, "fast standby set failed\n"); goto out_cci_addr_fail; } rval = smiapp_write(sensor, SMIAPP_REG_U8_CSI_SIGNALLING_MODE, sensor->hwcfg->csi_signalling_mode); if (rval) { dev_err(&client->dev, "csi signalling mode set failed\n"); goto out_cci_addr_fail; } /* DPHY control done by sensor based on requested link rate */ rval = smiapp_write(sensor, SMIAPP_REG_U8_DPHY_CTRL, SMIAPP_DPHY_CTRL_UI); if (rval < 0) goto out_cci_addr_fail; rval = smiapp_call_quirk(sensor, post_poweron); if (rval) { dev_err(&client->dev, "post_poweron quirks failed\n"); goto out_cci_addr_fail; } return 0; out_cci_addr_fail: gpiod_set_value(sensor->xshutdown, 0); clk_disable_unprepare(sensor->ext_clk); out_xclk_fail: regulator_disable(sensor->vana); return rval; } static int smiapp_power_off(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct v4l2_subdev *subdev = i2c_get_clientdata(client); struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); struct smiapp_sensor *sensor = container_of(ssd, struct smiapp_sensor, ssds[0]); /* * Currently power/clock to lens are enable/disabled separately * but they are essentially the same signals. So if the sensor is * powered off while the lens is powered on the sensor does not * really see a power off and next time the cci address change * will fail. So do a soft reset explicitly here. */ if (sensor->hwcfg->i2c_addr_alt) smiapp_write(sensor, SMIAPP_REG_U8_SOFTWARE_RESET, SMIAPP_SOFTWARE_RESET); gpiod_set_value(sensor->xshutdown, 0); clk_disable_unprepare(sensor->ext_clk); usleep_range(5000, 5000); regulator_disable(sensor->vana); sensor->streaming = false; return 0; } /* ----------------------------------------------------------------------------- * Video stream management */ static int smiapp_start_streaming(struct smiapp_sensor *sensor) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); unsigned int binning_mode; int rval; mutex_lock(&sensor->mutex); rval = smiapp_write(sensor, SMIAPP_REG_U16_CSI_DATA_FORMAT, (sensor->csi_format->width << 8) | sensor->csi_format->compressed); if (rval) goto out; /* Binning configuration */ if (sensor->binning_horizontal == 1 && sensor->binning_vertical == 1) { binning_mode = 0; } else { u8 binning_type = (sensor->binning_horizontal << 4) | sensor->binning_vertical; rval = smiapp_write( sensor, SMIAPP_REG_U8_BINNING_TYPE, binning_type); if (rval < 0) goto out; binning_mode = 1; } rval = smiapp_write(sensor, SMIAPP_REG_U8_BINNING_MODE, binning_mode); if (rval < 0) goto out; /* Set up PLL */ rval = smiapp_pll_configure(sensor); if (rval) goto out; /* Analog crop start coordinates */ rval = smiapp_write(sensor, SMIAPP_REG_U16_X_ADDR_START, sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].left); if (rval < 0) goto out; rval = smiapp_write(sensor, SMIAPP_REG_U16_Y_ADDR_START, sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].top); if (rval < 0) goto out; /* Analog crop end coordinates */ rval = smiapp_write( sensor, SMIAPP_REG_U16_X_ADDR_END, sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].left + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width - 1); if (rval < 0) goto out; rval = smiapp_write( sensor, SMIAPP_REG_U16_Y_ADDR_END, sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].top + sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height - 1); if (rval < 0) goto out; /* * Output from pixel array, including blanking, is set using * controls below. No need to set here. */ /* Digital crop */ if (SMIA_LIM(sensor, DIGITAL_CROP_CAPABILITY) == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) { rval = smiapp_write( sensor, SMIAPP_REG_U16_DIGITAL_CROP_X_OFFSET, sensor->scaler->crop[SMIAPP_PAD_SINK].left); if (rval < 0) goto out; rval = smiapp_write( sensor, SMIAPP_REG_U16_DIGITAL_CROP_Y_OFFSET, sensor->scaler->crop[SMIAPP_PAD_SINK].top); if (rval < 0) goto out; rval = smiapp_write( sensor, SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_WIDTH, sensor->scaler->crop[SMIAPP_PAD_SINK].width); if (rval < 0) goto out; rval = smiapp_write( sensor, SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_HEIGHT, sensor->scaler->crop[SMIAPP_PAD_SINK].height); if (rval < 0) goto out; } /* Scaling */ if (SMIA_LIM(sensor, SCALING_CAPABILITY) != SMIAPP_SCALING_CAPABILITY_NONE) { rval = smiapp_write(sensor, SMIAPP_REG_U16_SCALING_MODE, sensor->scaling_mode); if (rval < 0) goto out; rval = smiapp_write(sensor, SMIAPP_REG_U16_SCALE_M, sensor->scale_m); if (rval < 0) goto out; } /* Output size from sensor */ rval = smiapp_write(sensor, SMIAPP_REG_U16_X_OUTPUT_SIZE, sensor->src->crop[SMIAPP_PAD_SRC].width); if (rval < 0) goto out; rval = smiapp_write(sensor, SMIAPP_REG_U16_Y_OUTPUT_SIZE, sensor->src->crop[SMIAPP_PAD_SRC].height); if (rval < 0) goto out; if ((SMIA_LIM(sensor, FLASH_MODE_CAPABILITY) & (SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE | SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE)) && sensor->hwcfg->strobe_setup != NULL && sensor->hwcfg->strobe_setup->trigger != 0) { rval = smiapp_setup_flash_strobe(sensor); if (rval) goto out; } rval = smiapp_call_quirk(sensor, pre_streamon); if (rval) { dev_err(&client->dev, "pre_streamon quirks failed\n"); goto out; } rval = smiapp_write(sensor, SMIAPP_REG_U8_MODE_SELECT, SMIAPP_MODE_SELECT_STREAMING); out: mutex_unlock(&sensor->mutex); return rval; } static int smiapp_stop_streaming(struct smiapp_sensor *sensor) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); int rval; mutex_lock(&sensor->mutex); rval = smiapp_write(sensor, SMIAPP_REG_U8_MODE_SELECT, SMIAPP_MODE_SELECT_SOFTWARE_STANDBY); if (rval) goto out; rval = smiapp_call_quirk(sensor, post_streamoff); if (rval) dev_err(&client->dev, "post_streamoff quirks failed\n"); out: mutex_unlock(&sensor->mutex); return rval; } /* ----------------------------------------------------------------------------- * V4L2 subdev video operations */ static int smiapp_pm_get_init(struct smiapp_sensor *sensor) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); int rval; rval = pm_runtime_get_sync(&client->dev); if (rval < 0) { if (rval != -EBUSY && rval != -EAGAIN) pm_runtime_set_active(&client->dev); pm_runtime_put_noidle(&client->dev); return rval; } else if (!rval) { rval = v4l2_ctrl_handler_setup(&sensor->pixel_array-> ctrl_handler); if (rval) return rval; return v4l2_ctrl_handler_setup(&sensor->src->ctrl_handler); } return 0; } static int smiapp_set_stream(struct v4l2_subdev *subdev, int enable) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); int rval; if (sensor->streaming == enable) return 0; if (!enable) { smiapp_stop_streaming(sensor); sensor->streaming = false; pm_runtime_mark_last_busy(&client->dev); pm_runtime_put_autosuspend(&client->dev); return 0; } rval = smiapp_pm_get_init(sensor); if (rval) return rval; sensor->streaming = true; rval = smiapp_start_streaming(sensor); if (rval < 0) { sensor->streaming = false; pm_runtime_mark_last_busy(&client->dev); pm_runtime_put_autosuspend(&client->dev); } return rval; } static int smiapp_enum_mbus_code(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_mbus_code_enum *code) { struct i2c_client *client = v4l2_get_subdevdata(subdev); struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); unsigned int i; int idx = -1; int rval = -EINVAL; mutex_lock(&sensor->mutex); dev_err(&client->dev, "subdev %s, pad %d, index %d\n", subdev->name, code->pad, code->index); if (subdev != &sensor->src->sd || code->pad != SMIAPP_PAD_SRC) { if (code->index) goto out; code->code = sensor->internal_csi_format->code; rval = 0; goto out; } for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) { if (sensor->mbus_frame_fmts & (1 << i)) idx++; if (idx == code->index) { code->code = smiapp_csi_data_formats[i].code; dev_err(&client->dev, "found index %d, i %d, code %x\n", code->index, i, code->code); rval = 0; break; } } out: mutex_unlock(&sensor->mutex); return rval; } static u32 __smiapp_get_mbus_code(struct v4l2_subdev *subdev, unsigned int pad) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); if (subdev == &sensor->src->sd && pad == SMIAPP_PAD_SRC) return sensor->csi_format->code; else return sensor->internal_csi_format->code; } static int __smiapp_get_format(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_format *fmt) { struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { fmt->format = *v4l2_subdev_get_try_format(subdev, cfg, fmt->pad); } else { struct v4l2_rect *r; if (fmt->pad == ssd->source_pad) r = &ssd->crop[ssd->source_pad]; else r = &ssd->sink_fmt; fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad); fmt->format.width = r->width; fmt->format.height = r->height; fmt->format.field = V4L2_FIELD_NONE; } return 0; } static int smiapp_get_format(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_format *fmt) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); int rval; mutex_lock(&sensor->mutex); rval = __smiapp_get_format(subdev, cfg, fmt); mutex_unlock(&sensor->mutex); return rval; } static void smiapp_get_crop_compose(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_rect **crops, struct v4l2_rect **comps, int which) { struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); unsigned int i; if (which == V4L2_SUBDEV_FORMAT_ACTIVE) { if (crops) for (i = 0; i < subdev->entity.num_pads; i++) crops[i] = &ssd->crop[i]; if (comps) *comps = &ssd->compose; } else { if (crops) { for (i = 0; i < subdev->entity.num_pads; i++) { crops[i] = v4l2_subdev_get_try_crop(subdev, cfg, i); BUG_ON(!crops[i]); } } if (comps) { *comps = v4l2_subdev_get_try_compose(subdev, cfg, SMIAPP_PAD_SINK); BUG_ON(!*comps); } } } /* Changes require propagation only on sink pad. */ static void smiapp_propagate(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, int which, int target) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); struct v4l2_rect *comp, *crops[SMIAPP_PADS]; smiapp_get_crop_compose(subdev, cfg, crops, &comp, which); switch (target) { case V4L2_SEL_TGT_CROP: comp->width = crops[SMIAPP_PAD_SINK]->width; comp->height = crops[SMIAPP_PAD_SINK]->height; if (which == V4L2_SUBDEV_FORMAT_ACTIVE) { if (ssd == sensor->scaler) { sensor->scale_m = SMIA_LIM(sensor, SCALER_N_MIN); sensor->scaling_mode = SMIAPP_SCALING_MODE_NONE; } else if (ssd == sensor->binner) { sensor->binning_horizontal = 1; sensor->binning_vertical = 1; } } /* Fall through */ case V4L2_SEL_TGT_COMPOSE: *crops[SMIAPP_PAD_SRC] = *comp; break; default: BUG(); } } static const struct smiapp_csi_data_format *smiapp_validate_csi_data_format(struct smiapp_sensor *sensor, u32 code) { unsigned int i; for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) { if (sensor->mbus_frame_fmts & (1 << i) && smiapp_csi_data_formats[i].code == code) return &smiapp_csi_data_formats[i]; } return sensor->csi_format; } static int smiapp_set_format_source(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_format *fmt) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); const struct smiapp_csi_data_format *csi_format, *old_csi_format = sensor->csi_format; unsigned long *valid_link_freqs; u32 code = fmt->format.code; unsigned int i; int rval; rval = __smiapp_get_format(subdev, cfg, fmt); if (rval) return rval; /* * Media bus code is changeable on src subdev's source pad. On * other source pads we just get format here. */ if (subdev != &sensor->src->sd) return 0; csi_format = smiapp_validate_csi_data_format(sensor, code); fmt->format.code = csi_format->code; if (fmt->which != V4L2_SUBDEV_FORMAT_ACTIVE) return 0; sensor->csi_format = csi_format; if (csi_format->width != old_csi_format->width) for (i = 0; i < ARRAY_SIZE(sensor->test_data); i++) __v4l2_ctrl_modify_range( sensor->test_data[i], 0, (1 << csi_format->width) - 1, 1, 0); if (csi_format->compressed == old_csi_format->compressed) return 0; valid_link_freqs = &sensor->valid_link_freqs[sensor->csi_format->compressed - sensor->compressed_min_bpp]; __v4l2_ctrl_modify_range( sensor->link_freq, 0, __fls(*valid_link_freqs), ~*valid_link_freqs, __ffs(*valid_link_freqs)); return smiapp_pll_update(sensor); } static int smiapp_set_format(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_format *fmt) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); struct v4l2_rect *crops[SMIAPP_PADS]; mutex_lock(&sensor->mutex); if (fmt->pad == ssd->source_pad) { int rval; rval = smiapp_set_format_source(subdev, cfg, fmt); mutex_unlock(&sensor->mutex); return rval; } /* Sink pad. Width and height are changeable here. */ fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad); fmt->format.width &= ~1; fmt->format.height &= ~1; fmt->format.field = V4L2_FIELD_NONE; fmt->format.width = clamp(fmt->format.width, SMIA_LIM(sensor, MIN_X_OUTPUT_SIZE), SMIA_LIM(sensor, MAX_X_OUTPUT_SIZE)); fmt->format.height = clamp(fmt->format.height, SMIA_LIM(sensor, MIN_Y_OUTPUT_SIZE), SMIA_LIM(sensor, MAX_Y_OUTPUT_SIZE)); smiapp_get_crop_compose(subdev, cfg, crops, NULL, fmt->which); crops[ssd->sink_pad]->left = 0; crops[ssd->sink_pad]->top = 0; crops[ssd->sink_pad]->width = fmt->format.width; crops[ssd->sink_pad]->height = fmt->format.height; if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) ssd->sink_fmt = *crops[ssd->sink_pad]; smiapp_propagate(subdev, cfg, fmt->which, V4L2_SEL_TGT_CROP); mutex_unlock(&sensor->mutex); return 0; } /* * Calculate goodness of scaled image size compared to expected image * size and flags provided. */ #define SCALING_GOODNESS 100000 #define SCALING_GOODNESS_EXTREME 100000000 static int scaling_goodness(struct v4l2_subdev *subdev, int w, int ask_w, int h, int ask_h, u32 flags) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); struct i2c_client *client = v4l2_get_subdevdata(subdev); int val = 0; w &= ~1; ask_w &= ~1; h &= ~1; ask_h &= ~1; if (flags & V4L2_SEL_FLAG_GE) { if (w < ask_w) val -= SCALING_GOODNESS; if (h < ask_h) val -= SCALING_GOODNESS; } if (flags & V4L2_SEL_FLAG_LE) { if (w > ask_w) val -= SCALING_GOODNESS; if (h > ask_h) val -= SCALING_GOODNESS; } val -= abs(w - ask_w); val -= abs(h - ask_h); if (w < SMIA_LIM(sensor, MIN_X_OUTPUT_SIZE)) val -= SCALING_GOODNESS_EXTREME; dev_dbg(&client->dev, "w %d ask_w %d h %d ask_h %d goodness %d\n", w, ask_w, h, ask_h, val); return val; } static void smiapp_set_compose_binner(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_selection *sel, struct v4l2_rect **crops, struct v4l2_rect *comp) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); unsigned int i; unsigned int binh = 1, binv = 1; int best = scaling_goodness( subdev, crops[SMIAPP_PAD_SINK]->width, sel->r.width, crops[SMIAPP_PAD_SINK]->height, sel->r.height, sel->flags); for (i = 0; i < sensor->nbinning_subtypes; i++) { int this = scaling_goodness( subdev, crops[SMIAPP_PAD_SINK]->width / sensor->binning_subtypes[i].horizontal, sel->r.width, crops[SMIAPP_PAD_SINK]->height / sensor->binning_subtypes[i].vertical, sel->r.height, sel->flags); if (this > best) { binh = sensor->binning_subtypes[i].horizontal; binv = sensor->binning_subtypes[i].vertical; best = this; } } if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) { sensor->binning_vertical = binv; sensor->binning_horizontal = binh; } sel->r.width = (crops[SMIAPP_PAD_SINK]->width / binh) & ~1; sel->r.height = (crops[SMIAPP_PAD_SINK]->height / binv) & ~1; } /* * Calculate best scaling ratio and mode for given output resolution. * * Try all of these: horizontal ratio, vertical ratio and smallest * size possible (horizontally). * * Also try whether horizontal scaler or full scaler gives a better * result. */ static void smiapp_set_compose_scaler(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_selection *sel, struct v4l2_rect **crops, struct v4l2_rect *comp) { struct i2c_client *client = v4l2_get_subdevdata(subdev); struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); u32 min, max, a, b, max_m; u32 scale_m = SMIA_LIM(sensor, SCALER_N_MIN); int mode = SMIAPP_SCALING_MODE_HORIZONTAL; u32 try[4]; u32 ntry = 0; unsigned int i; int best = INT_MIN; sel->r.width = min_t(unsigned int, sel->r.width, crops[SMIAPP_PAD_SINK]->width); sel->r.height = min_t(unsigned int, sel->r.height, crops[SMIAPP_PAD_SINK]->height); a = crops[SMIAPP_PAD_SINK]->width * SMIA_LIM(sensor, SCALER_N_MIN) / sel->r.width; b = crops[SMIAPP_PAD_SINK]->height * SMIA_LIM(sensor, SCALER_N_MIN) / sel->r.height; max_m = crops[SMIAPP_PAD_SINK]->width * SMIA_LIM(sensor, SCALER_N_MIN) / SMIA_LIM(sensor, MIN_X_OUTPUT_SIZE); a = clamp(a, SMIA_LIM(sensor, SCALER_M_MIN), SMIA_LIM(sensor, SCALER_M_MAX)); b = clamp(b, SMIA_LIM(sensor, SCALER_M_MIN), SMIA_LIM(sensor, SCALER_M_MAX)); max_m = clamp(max_m, SMIA_LIM(sensor, SCALER_M_MIN), SMIA_LIM(sensor, SCALER_M_MAX)); dev_dbg(&client->dev, "scaling: a %d b %d max_m %d\n", a, b, max_m); min = min(max_m, min(a, b)); max = min(max_m, max(a, b)); try[ntry] = min; ntry++; if (min != max) { try[ntry] = max; ntry++; } if (max != max_m) { try[ntry] = min + 1; ntry++; if (min != max) { try[ntry] = max + 1; ntry++; } } for (i = 0; i < ntry; i++) { int this = scaling_goodness( subdev, crops[SMIAPP_PAD_SINK]->width / try[i] * SMIA_LIM(sensor, SCALER_N_MIN), sel->r.width, crops[SMIAPP_PAD_SINK]->height, sel->r.height, sel->flags); dev_dbg(&client->dev, "trying factor %d (%d)\n", try[i], i); if (this > best) { scale_m = try[i]; mode = SMIAPP_SCALING_MODE_HORIZONTAL; best = this; } if (SMIA_LIM(sensor, SCALING_CAPABILITY) == SMIAPP_SCALING_CAPABILITY_HORIZONTAL) continue; this = scaling_goodness( subdev, crops[SMIAPP_PAD_SINK]->width / try[i] * SMIA_LIM(sensor, SCALER_N_MIN), sel->r.width, crops[SMIAPP_PAD_SINK]->height / try[i] * SMIA_LIM(sensor, SCALER_N_MIN), sel->r.height, sel->flags); if (this > best) { scale_m = try[i]; mode = SMIAPP_SCALING_MODE_BOTH; best = this; } } sel->r.width = (crops[SMIAPP_PAD_SINK]->width / scale_m * SMIA_LIM(sensor, SCALER_N_MIN)) & ~1; if (mode == SMIAPP_SCALING_MODE_BOTH) sel->r.height = (crops[SMIAPP_PAD_SINK]->height / scale_m * SMIA_LIM(sensor, SCALER_N_MIN)) & ~1; else sel->r.height = crops[SMIAPP_PAD_SINK]->height; if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) { sensor->scale_m = scale_m; sensor->scaling_mode = mode; } } /* We're only called on source pads. This function sets scaling. */ static int smiapp_set_compose(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_selection *sel) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); struct v4l2_rect *comp, *crops[SMIAPP_PADS]; smiapp_get_crop_compose(subdev, cfg, crops, &comp, sel->which); sel->r.top = 0; sel->r.left = 0; if (ssd == sensor->binner) smiapp_set_compose_binner(subdev, cfg, sel, crops, comp); else smiapp_set_compose_scaler(subdev, cfg, sel, crops, comp); *comp = sel->r; smiapp_propagate(subdev, cfg, sel->which, V4L2_SEL_TGT_COMPOSE); if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) return smiapp_pll_blanking_update(sensor); return 0; } static int __smiapp_sel_supported(struct v4l2_subdev *subdev, struct v4l2_subdev_selection *sel) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); /* We only implement crop in three places. */ switch (sel->target) { case V4L2_SEL_TGT_CROP: case V4L2_SEL_TGT_CROP_BOUNDS: if (ssd == sensor->pixel_array && sel->pad == SMIAPP_PA_PAD_SRC) return 0; if (ssd == sensor->src && sel->pad == SMIAPP_PAD_SRC) return 0; if (ssd == sensor->scaler && sel->pad == SMIAPP_PAD_SINK && SMIA_LIM(sensor, DIGITAL_CROP_CAPABILITY) == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) return 0; return -EINVAL; case V4L2_SEL_TGT_NATIVE_SIZE: if (ssd == sensor->pixel_array && sel->pad == SMIAPP_PA_PAD_SRC) return 0; return -EINVAL; case V4L2_SEL_TGT_COMPOSE: case V4L2_SEL_TGT_COMPOSE_BOUNDS: if (sel->pad == ssd->source_pad) return -EINVAL; if (ssd == sensor->binner) return 0; if (ssd == sensor->scaler && SMIA_LIM(sensor, SCALING_CAPABILITY) != SMIAPP_SCALING_CAPABILITY_NONE) return 0; /* Fall through */ default: return -EINVAL; } } static int smiapp_set_crop(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_selection *sel) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); struct v4l2_rect *src_size, *crops[SMIAPP_PADS]; struct v4l2_rect _r; smiapp_get_crop_compose(subdev, cfg, crops, NULL, sel->which); if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) { if (sel->pad == ssd->sink_pad) src_size = &ssd->sink_fmt; else src_size = &ssd->compose; } else { if (sel->pad == ssd->sink_pad) { _r.left = 0; _r.top = 0; _r.width = v4l2_subdev_get_try_format(subdev, cfg, sel->pad) ->width; _r.height = v4l2_subdev_get_try_format(subdev, cfg, sel->pad) ->height; src_size = &_r; } else { src_size = v4l2_subdev_get_try_compose( subdev, cfg, ssd->sink_pad); } } if (ssd == sensor->src && sel->pad == SMIAPP_PAD_SRC) { sel->r.left = 0; sel->r.top = 0; } sel->r.width = min(sel->r.width, src_size->width); sel->r.height = min(sel->r.height, src_size->height); sel->r.left = min_t(int, sel->r.left, src_size->width - sel->r.width); sel->r.top = min_t(int, sel->r.top, src_size->height - sel->r.height); *crops[sel->pad] = sel->r; if (ssd != sensor->pixel_array && sel->pad == SMIAPP_PAD_SINK) smiapp_propagate(subdev, cfg, sel->which, V4L2_SEL_TGT_CROP); return 0; } static void smiapp_get_native_size(struct smiapp_subdev *ssd, struct v4l2_rect *r) { r->top = 0; r->left = 0; r->width = SMIA_LIM(ssd->sensor, X_ADDR_MAX) + 1; r->height = SMIA_LIM(ssd->sensor, Y_ADDR_MAX) + 1; } static int __smiapp_get_selection(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_selection *sel) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); struct v4l2_rect *comp, *crops[SMIAPP_PADS]; struct v4l2_rect sink_fmt; int ret; ret = __smiapp_sel_supported(subdev, sel); if (ret) return ret; smiapp_get_crop_compose(subdev, cfg, crops, &comp, sel->which); if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) { sink_fmt = ssd->sink_fmt; } else { struct v4l2_mbus_framefmt *fmt = v4l2_subdev_get_try_format(subdev, cfg, ssd->sink_pad); sink_fmt.left = 0; sink_fmt.top = 0; sink_fmt.width = fmt->width; sink_fmt.height = fmt->height; } switch (sel->target) { case V4L2_SEL_TGT_CROP_BOUNDS: case V4L2_SEL_TGT_NATIVE_SIZE: if (ssd == sensor->pixel_array) smiapp_get_native_size(ssd, &sel->r); else if (sel->pad == ssd->sink_pad) sel->r = sink_fmt; else sel->r = *comp; break; case V4L2_SEL_TGT_CROP: case V4L2_SEL_TGT_COMPOSE_BOUNDS: sel->r = *crops[sel->pad]; break; case V4L2_SEL_TGT_COMPOSE: sel->r = *comp; break; } return 0; } static int smiapp_get_selection(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_selection *sel) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); int rval; mutex_lock(&sensor->mutex); rval = __smiapp_get_selection(subdev, cfg, sel); mutex_unlock(&sensor->mutex); return rval; } static int smiapp_set_selection(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_selection *sel) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); int ret; ret = __smiapp_sel_supported(subdev, sel); if (ret) return ret; mutex_lock(&sensor->mutex); sel->r.left = max(0, sel->r.left & ~1); sel->r.top = max(0, sel->r.top & ~1); sel->r.width = SMIAPP_ALIGN_DIM(sel->r.width, sel->flags); sel->r.height = SMIAPP_ALIGN_DIM(sel->r.height, sel->flags); sel->r.width = max_t(unsigned int, SMIA_LIM(sensor, MIN_X_OUTPUT_SIZE), sel->r.width); sel->r.height = max_t(unsigned int, SMIA_LIM(sensor, MIN_Y_OUTPUT_SIZE), sel->r.height); switch (sel->target) { case V4L2_SEL_TGT_CROP: ret = smiapp_set_crop(subdev, cfg, sel); break; case V4L2_SEL_TGT_COMPOSE: ret = smiapp_set_compose(subdev, cfg, sel); break; default: ret = -EINVAL; } mutex_unlock(&sensor->mutex); return ret; } static int smiapp_get_skip_frames(struct v4l2_subdev *subdev, u32 *frames) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); *frames = sensor->frame_skip; return 0; } static int smiapp_get_skip_top_lines(struct v4l2_subdev *subdev, u32 *lines) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); *lines = sensor->image_start; return 0; } /* ----------------------------------------------------------------------------- * sysfs attributes */ static ssize_t smiapp_sysfs_nvm_read(struct device *dev, struct device_attribute *attr, char *buf) { struct v4l2_subdev *subdev = i2c_get_clientdata(to_i2c_client(dev)); struct i2c_client *client = v4l2_get_subdevdata(subdev); struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); int rval; if (!sensor->dev_init_done) return -EBUSY; rval = smiapp_pm_get_init(sensor); if (rval < 0) return -ENODEV; rval = smiapp_read_nvm(sensor, buf, PAGE_SIZE); if (rval < 0) { pm_runtime_put(&client->dev); dev_err(&client->dev, "nvm read failed\n"); return -ENODEV; } pm_runtime_mark_last_busy(&client->dev); pm_runtime_put_autosuspend(&client->dev); /* * NVM is still way below a PAGE_SIZE, so we can safely * assume this for now. */ return rval; } static DEVICE_ATTR(nvm, S_IRUGO, smiapp_sysfs_nvm_read, NULL); static ssize_t smiapp_sysfs_ident_read(struct device *dev, struct device_attribute *attr, char *buf) { struct v4l2_subdev *subdev = i2c_get_clientdata(to_i2c_client(dev)); struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); struct smiapp_module_info *minfo = &sensor->minfo; return snprintf(buf, PAGE_SIZE, "%2.2x%4.4x%2.2x\n", minfo->manufacturer_id, minfo->model_id, minfo->revision_number_major) + 1; } static DEVICE_ATTR(ident, S_IRUGO, smiapp_sysfs_ident_read, NULL); /* ----------------------------------------------------------------------------- * V4L2 subdev core operations */ static int smiapp_identify_module(struct smiapp_sensor *sensor) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); struct smiapp_module_info *minfo = &sensor->minfo; unsigned int i; int rval = 0; minfo->name = SMIAPP_NAME; /* Module info */ rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_MANUFACTURER_ID, &minfo->manufacturer_id); if (!rval) rval = smiapp_read_8only(sensor, SMIAPP_REG_U16_MODEL_ID, &minfo->model_id); if (!rval) rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_REVISION_NUMBER_MAJOR, &minfo->revision_number_major); if (!rval) rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_REVISION_NUMBER_MINOR, &minfo->revision_number_minor); if (!rval) rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_MODULE_DATE_YEAR, &minfo->module_year); if (!rval) rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_MODULE_DATE_MONTH, &minfo->module_month); if (!rval) rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_MODULE_DATE_DAY, &minfo->module_day); /* Sensor info */ if (!rval) rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_SENSOR_MANUFACTURER_ID, &minfo->sensor_manufacturer_id); if (!rval) rval = smiapp_read_8only(sensor, SMIAPP_REG_U16_SENSOR_MODEL_ID, &minfo->sensor_model_id); if (!rval) rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_SENSOR_REVISION_NUMBER, &minfo->sensor_revision_number); if (!rval) rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_SENSOR_FIRMWARE_VERSION, &minfo->sensor_firmware_version); /* SMIA */ if (!rval) rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_SMIA_VERSION, &minfo->smia_version); if (!rval) rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_SMIAPP_VERSION, &minfo->smiapp_version); if (rval) { dev_err(&client->dev, "sensor detection failed\n"); return -ENODEV; } dev_dbg(&client->dev, "module 0x%2.2x-0x%4.4x\n", minfo->manufacturer_id, minfo->model_id); dev_dbg(&client->dev, "module revision 0x%2.2x-0x%2.2x date %2.2d-%2.2d-%2.2d\n", minfo->revision_number_major, minfo->revision_number_minor, minfo->module_year, minfo->module_month, minfo->module_day); dev_dbg(&client->dev, "sensor 0x%2.2x-0x%4.4x\n", minfo->sensor_manufacturer_id, minfo->sensor_model_id); dev_dbg(&client->dev, "sensor revision 0x%2.2x firmware version 0x%2.2x\n", minfo->sensor_revision_number, minfo->sensor_firmware_version); dev_dbg(&client->dev, "smia version %2.2d smiapp version %2.2d\n", minfo->smia_version, minfo->smiapp_version); /* * Some modules have bad data in the lvalues below. Hope the * rvalues have better stuff. The lvalues are module * parameters whereas the rvalues are sensor parameters. */ if (!minfo->manufacturer_id && !minfo->model_id) { minfo->manufacturer_id = minfo->sensor_manufacturer_id; minfo->model_id = minfo->sensor_model_id; minfo->revision_number_major = minfo->sensor_revision_number; } for (i = 0; i < ARRAY_SIZE(smiapp_module_idents); i++) { if (smiapp_module_idents[i].manufacturer_id != minfo->manufacturer_id) continue; if (smiapp_module_idents[i].model_id != minfo->model_id) continue; if (smiapp_module_idents[i].flags & SMIAPP_MODULE_IDENT_FLAG_REV_LE) { if (smiapp_module_idents[i].revision_number_major < minfo->revision_number_major) continue; } else { if (smiapp_module_idents[i].revision_number_major != minfo->revision_number_major) continue; } minfo->name = smiapp_module_idents[i].name; minfo->quirk = smiapp_module_idents[i].quirk; break; } if (i >= ARRAY_SIZE(smiapp_module_idents)) dev_warn(&client->dev, "no quirks for this module; let's hope it's fully compliant\n"); dev_dbg(&client->dev, "the sensor is called %s, ident %2.2x%4.4x%2.2x\n", minfo->name, minfo->manufacturer_id, minfo->model_id, minfo->revision_number_major); return 0; } static const struct v4l2_subdev_ops smiapp_ops; static const struct v4l2_subdev_internal_ops smiapp_internal_ops; static const struct media_entity_operations smiapp_entity_ops; static int smiapp_register_subdev(struct smiapp_sensor *sensor, struct smiapp_subdev *ssd, struct smiapp_subdev *sink_ssd, u16 source_pad, u16 sink_pad, u32 link_flags) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); int rval; if (!sink_ssd) return 0; rval = media_entity_pads_init(&ssd->sd.entity, ssd->npads, ssd->pads); if (rval) { dev_err(&client->dev, "media_entity_pads_init failed\n"); return rval; } rval = v4l2_device_register_subdev(sensor->src->sd.v4l2_dev, &ssd->sd); if (rval) { dev_err(&client->dev, "v4l2_device_register_subdev failed\n"); return rval; } rval = media_create_pad_link(&ssd->sd.entity, source_pad, &sink_ssd->sd.entity, sink_pad, link_flags); if (rval) { dev_err(&client->dev, "media_create_pad_link failed\n"); v4l2_device_unregister_subdev(&ssd->sd); return rval; } return 0; } static void smiapp_unregistered(struct v4l2_subdev *subdev) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); unsigned int i; for (i = 1; i < sensor->ssds_used; i++) v4l2_device_unregister_subdev(&sensor->ssds[i].sd); } static int smiapp_registered(struct v4l2_subdev *subdev) { struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); int rval; if (sensor->scaler) { rval = smiapp_register_subdev( sensor, sensor->binner, sensor->scaler, SMIAPP_PAD_SRC, SMIAPP_PAD_SINK, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); if (rval < 0) return rval; } rval = smiapp_register_subdev( sensor, sensor->pixel_array, sensor->binner, SMIAPP_PA_PAD_SRC, SMIAPP_PAD_SINK, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); if (rval) goto out_err; return 0; out_err: smiapp_unregistered(subdev); return rval; } static void smiapp_cleanup(struct smiapp_sensor *sensor) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); device_remove_file(&client->dev, &dev_attr_nvm); device_remove_file(&client->dev, &dev_attr_ident); smiapp_free_controls(sensor); } static void smiapp_create_subdev(struct smiapp_sensor *sensor, struct smiapp_subdev *ssd, const char *name, unsigned short num_pads) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); if (!ssd) return; if (ssd != sensor->src) v4l2_subdev_init(&ssd->sd, &smiapp_ops); ssd->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; ssd->sensor = sensor; ssd->npads = num_pads; ssd->source_pad = num_pads - 1; v4l2_i2c_subdev_set_name(&ssd->sd, client, sensor->minfo.name, name); smiapp_get_native_size(ssd, &ssd->sink_fmt); ssd->compose.width = ssd->sink_fmt.width; ssd->compose.height = ssd->sink_fmt.height; ssd->crop[ssd->source_pad] = ssd->compose; ssd->pads[ssd->source_pad].flags = MEDIA_PAD_FL_SOURCE; if (ssd != sensor->pixel_array) { ssd->crop[ssd->sink_pad] = ssd->compose; ssd->pads[ssd->sink_pad].flags = MEDIA_PAD_FL_SINK; } ssd->sd.entity.ops = &smiapp_entity_ops; if (ssd == sensor->src) return; ssd->sd.internal_ops = &smiapp_internal_ops; ssd->sd.owner = THIS_MODULE; ssd->sd.dev = &client->dev; v4l2_set_subdevdata(&ssd->sd, client); } static int smiapp_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) { struct smiapp_subdev *ssd = to_smiapp_subdev(sd); struct smiapp_sensor *sensor = ssd->sensor; unsigned int i; mutex_lock(&sensor->mutex); for (i = 0; i < ssd->npads; i++) { struct v4l2_mbus_framefmt *try_fmt = v4l2_subdev_get_try_format(sd, fh->pad, i); struct v4l2_rect *try_crop = v4l2_subdev_get_try_crop(sd, fh->pad, i); struct v4l2_rect *try_comp; smiapp_get_native_size(ssd, try_crop); try_fmt->width = try_crop->width; try_fmt->height = try_crop->height; try_fmt->code = sensor->internal_csi_format->code; try_fmt->field = V4L2_FIELD_NONE; if (ssd != sensor->pixel_array) continue; try_comp = v4l2_subdev_get_try_compose(sd, fh->pad, i); *try_comp = *try_crop; } mutex_unlock(&sensor->mutex); return 0; } static const struct v4l2_subdev_video_ops smiapp_video_ops = { .s_stream = smiapp_set_stream, }; static const struct v4l2_subdev_pad_ops smiapp_pad_ops = { .enum_mbus_code = smiapp_enum_mbus_code, .get_fmt = smiapp_get_format, .set_fmt = smiapp_set_format, .get_selection = smiapp_get_selection, .set_selection = smiapp_set_selection, }; static const struct v4l2_subdev_sensor_ops smiapp_sensor_ops = { .g_skip_frames = smiapp_get_skip_frames, .g_skip_top_lines = smiapp_get_skip_top_lines, }; static const struct v4l2_subdev_ops smiapp_ops = { .video = &smiapp_video_ops, .pad = &smiapp_pad_ops, .sensor = &smiapp_sensor_ops, }; static const struct media_entity_operations smiapp_entity_ops = { .link_validate = v4l2_subdev_link_validate, }; static const struct v4l2_subdev_internal_ops smiapp_internal_src_ops = { .registered = smiapp_registered, .unregistered = smiapp_unregistered, .open = smiapp_open, }; static const struct v4l2_subdev_internal_ops smiapp_internal_ops = { .open = smiapp_open, }; /* ----------------------------------------------------------------------------- * I2C Driver */ static int __maybe_unused smiapp_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct v4l2_subdev *subdev = i2c_get_clientdata(client); struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); bool streaming = sensor->streaming; int rval; rval = pm_runtime_get_sync(dev); if (rval < 0) { if (rval != -EBUSY && rval != -EAGAIN) pm_runtime_set_active(&client->dev); pm_runtime_put(dev); return -EAGAIN; } if (sensor->streaming) smiapp_stop_streaming(sensor); /* save state for resume */ sensor->streaming = streaming; return 0; } static int __maybe_unused smiapp_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct v4l2_subdev *subdev = i2c_get_clientdata(client); struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); int rval = 0; pm_runtime_put(dev); if (sensor->streaming) rval = smiapp_start_streaming(sensor); return rval; } static struct smiapp_hwconfig *smiapp_get_hwconfig(struct device *dev) { struct smiapp_hwconfig *hwcfg; struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 }; struct fwnode_handle *ep; struct fwnode_handle *fwnode = dev_fwnode(dev); u32 rotation; int i; int rval; if (!fwnode) return dev->platform_data; ep = fwnode_graph_get_next_endpoint(fwnode, NULL); if (!ep) return NULL; bus_cfg.bus_type = V4L2_MBUS_CSI2_DPHY; rval = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); if (rval == -ENXIO) { bus_cfg = (struct v4l2_fwnode_endpoint) { .bus_type = V4L2_MBUS_CCP2 }; rval = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); } if (rval) goto out_err; hwcfg = devm_kzalloc(dev, sizeof(*hwcfg), GFP_KERNEL); if (!hwcfg) goto out_err; switch (bus_cfg.bus_type) { case V4L2_MBUS_CSI2_DPHY: hwcfg->csi_signalling_mode = SMIAPP_CSI_SIGNALLING_MODE_CSI2; hwcfg->lanes = bus_cfg.bus.mipi_csi2.num_data_lanes; break; case V4L2_MBUS_CCP2: hwcfg->csi_signalling_mode = (bus_cfg.bus.mipi_csi1.strobe) ? SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE : SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK; hwcfg->lanes = 1; break; default: dev_err(dev, "unsupported bus %u\n", bus_cfg.bus_type); goto out_err; } dev_dbg(dev, "lanes %u\n", hwcfg->lanes); rval = fwnode_property_read_u32(fwnode, "rotation", &rotation); if (!rval) { switch (rotation) { case 180: hwcfg->module_board_orient = SMIAPP_MODULE_BOARD_ORIENT_180; /* Fall through */ case 0: break; default: dev_err(dev, "invalid rotation %u\n", rotation); goto out_err; } } rval = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency", &hwcfg->ext_clk); if (rval) dev_info(dev, "can't get clock-frequency\n"); dev_dbg(dev, "clk %d, mode %d\n", hwcfg->ext_clk, hwcfg->csi_signalling_mode); if (!bus_cfg.nr_of_link_frequencies) { dev_warn(dev, "no link frequencies defined\n"); goto out_err; } hwcfg->op_sys_clock = devm_kcalloc( dev, bus_cfg.nr_of_link_frequencies + 1 /* guardian */, sizeof(*hwcfg->op_sys_clock), GFP_KERNEL); if (!hwcfg->op_sys_clock) goto out_err; for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) { hwcfg->op_sys_clock[i] = bus_cfg.link_frequencies[i]; dev_dbg(dev, "freq %d: %lld\n", i, hwcfg->op_sys_clock[i]); } v4l2_fwnode_endpoint_free(&bus_cfg); fwnode_handle_put(ep); return hwcfg; out_err: v4l2_fwnode_endpoint_free(&bus_cfg); fwnode_handle_put(ep); return NULL; } static int smiapp_probe(struct i2c_client *client) { struct smiapp_sensor *sensor; struct smiapp_hwconfig *hwcfg = smiapp_get_hwconfig(&client->dev); unsigned int i; int rval; if (hwcfg == NULL) return -ENODEV; sensor = devm_kzalloc(&client->dev, sizeof(*sensor), GFP_KERNEL); if (sensor == NULL) return -ENOMEM; sensor->hwcfg = hwcfg; sensor->src = &sensor->ssds[sensor->ssds_used]; v4l2_i2c_subdev_init(&sensor->src->sd, client, &smiapp_ops); sensor->src->sd.internal_ops = &smiapp_internal_src_ops; sensor->vana = devm_regulator_get(&client->dev, "vana"); if (IS_ERR(sensor->vana)) { dev_err(&client->dev, "could not get regulator for vana\n"); return PTR_ERR(sensor->vana); } sensor->ext_clk = devm_clk_get(&client->dev, NULL); if (PTR_ERR(sensor->ext_clk) == -ENOENT) { dev_info(&client->dev, "no clock defined, continuing...\n"); sensor->ext_clk = NULL; } else if (IS_ERR(sensor->ext_clk)) { dev_err(&client->dev, "could not get clock (%ld)\n", PTR_ERR(sensor->ext_clk)); return -EPROBE_DEFER; } if (sensor->ext_clk) { if (sensor->hwcfg->ext_clk) { unsigned long rate; rval = clk_set_rate(sensor->ext_clk, sensor->hwcfg->ext_clk); if (rval < 0) { dev_err(&client->dev, "unable to set clock freq to %u\n", sensor->hwcfg->ext_clk); return rval; } rate = clk_get_rate(sensor->ext_clk); if (rate != sensor->hwcfg->ext_clk) { dev_err(&client->dev, "can't set clock freq, asked for %u but got %lu\n", sensor->hwcfg->ext_clk, rate); return rval; } } else { sensor->hwcfg->ext_clk = clk_get_rate(sensor->ext_clk); dev_dbg(&client->dev, "obtained clock freq %u\n", sensor->hwcfg->ext_clk); } } else if (sensor->hwcfg->ext_clk) { dev_dbg(&client->dev, "assuming clock freq %u\n", sensor->hwcfg->ext_clk); } else { dev_err(&client->dev, "unable to obtain clock freq\n"); return -EINVAL; } sensor->xshutdown = devm_gpiod_get_optional(&client->dev, "xshutdown", GPIOD_OUT_LOW); if (IS_ERR(sensor->xshutdown)) return PTR_ERR(sensor->xshutdown); rval = smiapp_power_on(&client->dev); if (rval < 0) return rval; mutex_init(&sensor->mutex); rval = smiapp_identify_module(sensor); if (rval) { rval = -ENODEV; goto out_power_off; } rval = smiapp_read_all_smia_limits(sensor); if (rval) { rval = -ENODEV; goto out_power_off; } rval = smiapp_read_frame_fmt(sensor); if (rval) { rval = -ENODEV; goto out_power_off; } /* * Handle Sensor Module orientation on the board. * * The application of H-FLIP and V-FLIP on the sensor is modified by * the sensor orientation on the board. * * For SMIAPP_BOARD_SENSOR_ORIENT_180 the default behaviour is to set * both H-FLIP and V-FLIP for normal operation which also implies * that a set/unset operation for user space HFLIP and VFLIP v4l2 * controls will need to be internally inverted. * * Rotation also changes the bayer pattern. */ if (sensor->hwcfg->module_board_orient == SMIAPP_MODULE_BOARD_ORIENT_180) sensor->hvflip_inv_mask = SMIAPP_IMAGE_ORIENTATION_HFLIP | SMIAPP_IMAGE_ORIENTATION_VFLIP; rval = smiapp_call_quirk(sensor, limits); if (rval) { dev_err(&client->dev, "limits quirks failed\n"); goto out_power_off; } if (SMIA_LIM(sensor, BINNING_CAPABILITY)) { u32 val; rval = smiapp_read(sensor, SMIAPP_REG_U8_BINNING_SUBTYPES, &val); if (rval < 0) { rval = -ENODEV; goto out_power_off; } sensor->nbinning_subtypes = min_t(u8, val, SMIAPP_BINNING_SUBTYPES); for (i = 0; i < sensor->nbinning_subtypes; i++) { rval = smiapp_read( sensor, SMIAPP_REG_U8_BINNING_TYPE_n(i), &val); if (rval < 0) { rval = -ENODEV; goto out_power_off; } sensor->binning_subtypes[i] = *(struct smiapp_binning_subtype *)&val; dev_dbg(&client->dev, "binning %xx%x\n", sensor->binning_subtypes[i].horizontal, sensor->binning_subtypes[i].vertical); } } sensor->binning_horizontal = 1; sensor->binning_vertical = 1; if (device_create_file(&client->dev, &dev_attr_ident) != 0) { dev_err(&client->dev, "sysfs ident entry creation failed\n"); rval = -ENOENT; goto out_power_off; } if (sensor->minfo.smiapp_version && SMIA_LIM(sensor, DATA_TRANSFER_IF_CAPABILITY) & SMIAPP_DATA_TRANSFER_IF_CAPABILITY_SUPPORTED) { if (device_create_file(&client->dev, &dev_attr_nvm) != 0) { dev_err(&client->dev, "sysfs nvm entry failed\n"); rval = -EBUSY; goto out_cleanup; } } /* We consider this as profile 0 sensor if any of these are zero. */ if (!SMIA_LIM(sensor, MIN_OP_SYS_CLK_DIV) || !SMIA_LIM(sensor, MAX_OP_SYS_CLK_DIV) || !SMIA_LIM(sensor, MIN_OP_PIX_CLK_DIV) || !SMIA_LIM(sensor, MAX_OP_PIX_CLK_DIV)) { sensor->minfo.smiapp_profile = SMIAPP_PROFILE_0; } else if (SMIA_LIM(sensor, SCALING_CAPABILITY) != SMIAPP_SCALING_CAPABILITY_NONE) { if (SMIA_LIM(sensor, SCALING_CAPABILITY) == SMIAPP_SCALING_CAPABILITY_HORIZONTAL) sensor->minfo.smiapp_profile = SMIAPP_PROFILE_1; else sensor->minfo.smiapp_profile = SMIAPP_PROFILE_2; sensor->scaler = &sensor->ssds[sensor->ssds_used]; sensor->ssds_used++; } else if (SMIA_LIM(sensor, DIGITAL_CROP_CAPABILITY) == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) { sensor->scaler = &sensor->ssds[sensor->ssds_used]; sensor->ssds_used++; } sensor->binner = &sensor->ssds[sensor->ssds_used]; sensor->ssds_used++; sensor->pixel_array = &sensor->ssds[sensor->ssds_used]; sensor->ssds_used++; sensor->scale_m = SMIA_LIM(sensor, SCALER_N_MIN); /* prepare PLL configuration input values */ sensor->pll.bus_type = SMIAPP_PLL_BUS_TYPE_CSI2; sensor->pll.csi2.lanes = sensor->hwcfg->lanes; sensor->pll.ext_clk_freq_hz = sensor->hwcfg->ext_clk; sensor->pll.scale_n = SMIA_LIM(sensor, SCALER_N_MIN); /* Profile 0 sensors have no separate OP clock branch. */ if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0) sensor->pll.flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS; smiapp_create_subdev(sensor, sensor->scaler, " scaler", 2); smiapp_create_subdev(sensor, sensor->binner, " binner", 2); smiapp_create_subdev(sensor, sensor->pixel_array, " pixel_array", 1); dev_dbg(&client->dev, "profile %d\n", sensor->minfo.smiapp_profile); sensor->pixel_array->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; rval = smiapp_init_controls(sensor); if (rval < 0) goto out_cleanup; rval = smiapp_call_quirk(sensor, init); if (rval) goto out_cleanup; rval = smiapp_get_mbus_formats(sensor); if (rval) { rval = -ENODEV; goto out_cleanup; } rval = smiapp_init_late_controls(sensor); if (rval) { rval = -ENODEV; goto out_cleanup; } mutex_lock(&sensor->mutex); rval = smiapp_pll_blanking_update(sensor); mutex_unlock(&sensor->mutex); if (rval) { dev_err(&client->dev, "update mode failed\n"); goto out_cleanup; } sensor->streaming = false; sensor->dev_init_done = true; rval = media_entity_pads_init(&sensor->src->sd.entity, 2, sensor->src->pads); if (rval < 0) goto out_media_entity_cleanup; pm_runtime_set_active(&client->dev); pm_runtime_get_noresume(&client->dev); pm_runtime_enable(&client->dev); rval = v4l2_async_register_subdev_sensor_common(&sensor->src->sd); if (rval < 0) goto out_disable_runtime_pm; pm_runtime_set_autosuspend_delay(&client->dev, 1000); pm_runtime_use_autosuspend(&client->dev); pm_runtime_put_autosuspend(&client->dev); return 0; out_disable_runtime_pm: pm_runtime_put_noidle(&client->dev); pm_runtime_disable(&client->dev); out_media_entity_cleanup: media_entity_cleanup(&sensor->src->sd.entity); out_cleanup: smiapp_cleanup(sensor); out_power_off: smiapp_power_off(&client->dev); mutex_destroy(&sensor->mutex); return rval; } static int smiapp_remove(struct i2c_client *client) { struct v4l2_subdev *subdev = i2c_get_clientdata(client); struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); unsigned int i; v4l2_async_unregister_subdev(subdev); pm_runtime_disable(&client->dev); if (!pm_runtime_status_suspended(&client->dev)) smiapp_power_off(&client->dev); pm_runtime_set_suspended(&client->dev); for (i = 0; i < sensor->ssds_used; i++) { v4l2_device_unregister_subdev(&sensor->ssds[i].sd); media_entity_cleanup(&sensor->ssds[i].sd.entity); } smiapp_cleanup(sensor); mutex_destroy(&sensor->mutex); return 0; } static const struct of_device_id smiapp_of_table[] = { { .compatible = "nokia,smia" }, { }, }; MODULE_DEVICE_TABLE(of, smiapp_of_table); static const struct i2c_device_id smiapp_id_table[] = { { SMIAPP_NAME, 0 }, { }, }; MODULE_DEVICE_TABLE(i2c, smiapp_id_table); static const struct dev_pm_ops smiapp_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(smiapp_suspend, smiapp_resume) SET_RUNTIME_PM_OPS(smiapp_power_off, smiapp_power_on, NULL) }; static struct i2c_driver smiapp_i2c_driver = { .driver = { .of_match_table = smiapp_of_table, .name = SMIAPP_NAME, .pm = &smiapp_pm_ops, }, .probe_new = smiapp_probe, .remove = smiapp_remove, .id_table = smiapp_id_table, }; module_i2c_driver(smiapp_i2c_driver); MODULE_AUTHOR("Sakari Ailus <sakari.ailus@iki.fi>"); MODULE_DESCRIPTION("Generic SMIA/SMIA++ camera module driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1