Contributors: 8
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Manu Abraham |
383 |
94.80% |
5 |
38.46% |
| Mauro Carvalho Chehab |
7 |
1.73% |
2 |
15.38% |
| Ben Hutchings |
4 |
0.99% |
1 |
7.69% |
| Björn Mork |
3 |
0.74% |
1 |
7.69% |
| Alexey Dobriyan |
3 |
0.74% |
1 |
7.69% |
| Thomas Gleixner |
2 |
0.50% |
1 |
7.69% |
| Hans Verkuil |
1 |
0.25% |
1 |
7.69% |
| Bhumika Goyal |
1 |
0.25% |
1 |
7.69% |
| Total |
404 |
|
13 |
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
Mantis VP-1034 driver
Copyright (C) Manu Abraham (abraham.manu@gmail.com)
*/
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include <media/dmxdev.h>
#include <media/dvbdev.h>
#include <media/dvb_demux.h>
#include <media/dvb_frontend.h>
#include <media/dvb_net.h>
#include "mb86a16.h"
#include "mantis_common.h"
#include "mantis_ioc.h"
#include "mantis_dvb.h"
#include "mantis_vp1034.h"
#include "mantis_reg.h"
static const struct mb86a16_config vp1034_mb86a16_config = {
.demod_address = 0x08,
.set_voltage = vp1034_set_voltage,
};
#define MANTIS_MODEL_NAME "VP-1034"
#define MANTIS_DEV_TYPE "DVB-S/DSS"
int vp1034_set_voltage(struct dvb_frontend *fe, enum fe_sec_voltage voltage)
{
struct mantis_pci *mantis = fe->dvb->priv;
switch (voltage) {
case SEC_VOLTAGE_13:
dprintk(MANTIS_ERROR, 1, "Polarization=[13V]");
mantis_gpio_set_bits(mantis, 13, 1);
mantis_gpio_set_bits(mantis, 14, 0);
break;
case SEC_VOLTAGE_18:
dprintk(MANTIS_ERROR, 1, "Polarization=[18V]");
mantis_gpio_set_bits(mantis, 13, 1);
mantis_gpio_set_bits(mantis, 14, 1);
break;
case SEC_VOLTAGE_OFF:
dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
break;
default:
dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32) voltage);
return -EINVAL;
}
mmwrite(0x00, MANTIS_GPIF_DOUT);
return 0;
}
static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
{
struct i2c_adapter *adapter = &mantis->adapter;
int err = 0;
err = mantis_frontend_power(mantis, POWER_ON);
if (err == 0) {
mantis_frontend_soft_reset(mantis);
msleep(250);
dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
fe = dvb_attach(mb86a16_attach, &vp1034_mb86a16_config, adapter);
if (fe) {
dprintk(MANTIS_ERROR, 1,
"found MB86A16 DVB-S/DSS frontend @0x%02x",
vp1034_mb86a16_config.demod_address);
} else {
return -1;
}
} else {
dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
adapter->name,
err);
return -EIO;
}
mantis->fe = fe;
dprintk(MANTIS_ERROR, 1, "Done!");
return 0;
}
struct mantis_hwconfig vp1034_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
.ts_size = MANTIS_TS_204,
.baud_rate = MANTIS_BAUD_9600,
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
.frontend_init = vp1034_frontend_init,
.power = GPIF_A12,
.reset = GPIF_A13,
};