Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Laurent Pinchart | 572 | 90.36% | 21 | 77.78% |
Sergei Shtylyov | 35 | 5.53% | 1 | 3.70% |
Hans Verkuil | 14 | 2.21% | 3 | 11.11% |
Kieran Bingham | 12 | 1.90% | 2 | 7.41% |
Total | 633 | 27 |
// SPDX-License-Identifier: GPL-2.0+ /* * vsp1_lif.c -- R-Car VSP1 LCD Controller Interface * * Copyright (C) 2013-2014 Renesas Electronics Corporation * * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) */ #include <linux/device.h> #include <linux/gfp.h> #include <media/v4l2-subdev.h> #include "vsp1.h" #include "vsp1_dl.h" #include "vsp1_lif.h" #define LIF_MIN_SIZE 2U #define LIF_MAX_SIZE 8190U /* ----------------------------------------------------------------------------- * Device Access */ static inline void vsp1_lif_write(struct vsp1_lif *lif, struct vsp1_dl_body *dlb, u32 reg, u32 data) { vsp1_dl_body_write(dlb, reg + lif->entity.index * VI6_LIF_OFFSET, data); } /* ----------------------------------------------------------------------------- * V4L2 Subdevice Operations */ static const unsigned int lif_codes[] = { MEDIA_BUS_FMT_ARGB8888_1X32, MEDIA_BUS_FMT_AYUV8_1X32, }; static int lif_enum_mbus_code(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_mbus_code_enum *code) { return vsp1_subdev_enum_mbus_code(subdev, cfg, code, lif_codes, ARRAY_SIZE(lif_codes)); } static int lif_enum_frame_size(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_frame_size_enum *fse) { return vsp1_subdev_enum_frame_size(subdev, cfg, fse, LIF_MIN_SIZE, LIF_MIN_SIZE, LIF_MAX_SIZE, LIF_MAX_SIZE); } static int lif_set_format(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_format *fmt) { return vsp1_subdev_set_pad_format(subdev, cfg, fmt, lif_codes, ARRAY_SIZE(lif_codes), LIF_MIN_SIZE, LIF_MIN_SIZE, LIF_MAX_SIZE, LIF_MAX_SIZE); } static const struct v4l2_subdev_pad_ops lif_pad_ops = { .init_cfg = vsp1_entity_init_cfg, .enum_mbus_code = lif_enum_mbus_code, .enum_frame_size = lif_enum_frame_size, .get_fmt = vsp1_subdev_get_pad_format, .set_fmt = lif_set_format, }; static const struct v4l2_subdev_ops lif_ops = { .pad = &lif_pad_ops, }; /* ----------------------------------------------------------------------------- * VSP1 Entity Operations */ static void lif_configure_stream(struct vsp1_entity *entity, struct vsp1_pipeline *pipe, struct vsp1_dl_list *dl, struct vsp1_dl_body *dlb) { const struct v4l2_mbus_framefmt *format; struct vsp1_lif *lif = to_lif(&entity->subdev); unsigned int hbth; unsigned int obth; unsigned int lbth; format = vsp1_entity_get_pad_format(&lif->entity, lif->entity.config, LIF_PAD_SOURCE); switch (entity->vsp1->version & VI6_IP_VERSION_MODEL_MASK) { case VI6_IP_VERSION_MODEL_VSPD_GEN2: case VI6_IP_VERSION_MODEL_VSPD_V2H: hbth = 1536; obth = min(128U, (format->width + 1) / 2 * format->height - 4); lbth = 1520; break; case VI6_IP_VERSION_MODEL_VSPDL_GEN3: case VI6_IP_VERSION_MODEL_VSPD_V3: hbth = 0; obth = 1500; lbth = 0; break; case VI6_IP_VERSION_MODEL_VSPD_GEN3: default: hbth = 0; obth = 3000; lbth = 0; break; } vsp1_lif_write(lif, dlb, VI6_LIF_CSBTH, (hbth << VI6_LIF_CSBTH_HBTH_SHIFT) | (lbth << VI6_LIF_CSBTH_LBTH_SHIFT)); vsp1_lif_write(lif, dlb, VI6_LIF_CTRL, (obth << VI6_LIF_CTRL_OBTH_SHIFT) | (format->code == 0 ? VI6_LIF_CTRL_CFMT : 0) | VI6_LIF_CTRL_REQSEL | VI6_LIF_CTRL_LIF_EN); /* * On R-Car V3M the LIF0 buffer attribute register has to be set to a * non-default value to guarantee proper operation (otherwise artifacts * may appear on the output). The value required by the manual is not * explained but is likely a buffer size or threshold. */ if ((entity->vsp1->version & VI6_IP_VERSION_MASK) == (VI6_IP_VERSION_MODEL_VSPD_V3 | VI6_IP_VERSION_SOC_V3M)) vsp1_lif_write(lif, dlb, VI6_LIF_LBA, VI6_LIF_LBA_LBA0 | (1536 << VI6_LIF_LBA_LBA1_SHIFT)); } static const struct vsp1_entity_operations lif_entity_ops = { .configure_stream = lif_configure_stream, }; /* ----------------------------------------------------------------------------- * Initialization and Cleanup */ struct vsp1_lif *vsp1_lif_create(struct vsp1_device *vsp1, unsigned int index) { struct vsp1_lif *lif; int ret; lif = devm_kzalloc(vsp1->dev, sizeof(*lif), GFP_KERNEL); if (lif == NULL) return ERR_PTR(-ENOMEM); lif->entity.ops = &lif_entity_ops; lif->entity.type = VSP1_ENTITY_LIF; lif->entity.index = index; /* * The LIF is never exposed to userspace, but media entity registration * requires a function to be set. Use PROC_VIDEO_PIXEL_FORMATTER just to * avoid triggering a WARN_ON(), the value won't be seen anywhere. */ ret = vsp1_entity_init(vsp1, &lif->entity, "lif", 2, &lif_ops, MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER); if (ret < 0) return ERR_PTR(ret); return lif; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1