Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Heiner Kallweit | 638 | 97.55% | 1 | 25.00% |
Priit Laes | 14 | 2.14% | 1 | 25.00% |
Greg Kroah-Hartman | 2 | 0.31% | 2 | 50.00% |
Total | 654 | 4 |
// SPDX-License-Identifier: GPL-2.0+ /* * FB driver for the HX8357D LCD Controller * Copyright (C) 2015 Adafruit Industries * * Based on the HX8347D FB driver * Copyright (C) 2013 Christian Vogelgsang * * Based on driver code found here: https://github.com/watterott/r61505u-Adapter */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> #include <video/mipi_display.h> #include "fbtft.h" #include "fb_hx8357d.h" #define DRVNAME "fb_hx8357d" #define WIDTH 320 #define HEIGHT 480 static int init_display(struct fbtft_par *par) { par->fbtftops.reset(par); /* Reset things like Gamma */ write_reg(par, MIPI_DCS_SOFT_RESET); usleep_range(5000, 7000); /* setextc */ write_reg(par, HX8357D_SETC, 0xFF, 0x83, 0x57); msleep(150); /* setRGB which also enables SDO */ write_reg(par, HX8357_SETRGB, 0x00, 0x00, 0x06, 0x06); /* -1.52V */ write_reg(par, HX8357D_SETCOM, 0x25); /* Normal mode 70Hz, Idle mode 55 Hz */ write_reg(par, HX8357_SETOSC, 0x68); /* Set Panel - BGR, Gate direction swapped */ write_reg(par, HX8357_SETPANEL, 0x05); write_reg(par, HX8357_SETPWR1, 0x00, /* Not deep standby */ 0x15, /* BT */ 0x1C, /* VSPR */ 0x1C, /* VSNR */ 0x83, /* AP */ 0xAA); /* FS */ write_reg(par, HX8357D_SETSTBA, 0x50, /* OPON normal */ 0x50, /* OPON idle */ 0x01, /* STBA */ 0x3C, /* STBA */ 0x1E, /* STBA */ 0x08); /* GEN */ write_reg(par, HX8357D_SETCYC, 0x02, /* NW 0x02 */ 0x40, /* RTN */ 0x00, /* DIV */ 0x2A, /* DUM */ 0x2A, /* DUM */ 0x0D, /* GDON */ 0x78); /* GDOFF */ write_reg(par, HX8357D_SETGAMMA, 0x02, 0x0A, 0x11, 0x1d, 0x23, 0x35, 0x41, 0x4b, 0x4b, 0x42, 0x3A, 0x27, 0x1B, 0x08, 0x09, 0x03, 0x02, 0x0A, 0x11, 0x1d, 0x23, 0x35, 0x41, 0x4b, 0x4b, 0x42, 0x3A, 0x27, 0x1B, 0x08, 0x09, 0x03, 0x00, 0x01); /* 16 bit */ write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55); write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, 0xC0); /* TE off */ write_reg(par, MIPI_DCS_SET_TEAR_ON, 0x00); /* tear line */ write_reg(par, MIPI_DCS_SET_TEAR_SCANLINE, 0x00, 0x02); /* Exit Sleep */ write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE); msleep(150); /* display on */ write_reg(par, MIPI_DCS_SET_DISPLAY_ON); usleep_range(5000, 7000); return 0; } static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) { write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, xs >> 8, xs & 0xff, /* XSTART */ xe >> 8, xe & 0xff); /* XEND */ write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, ys >> 8, ys & 0xff, /* YSTART */ ye >> 8, ye & 0xff); /* YEND */ write_reg(par, MIPI_DCS_WRITE_MEMORY_START); } #define HX8357D_MADCTL_MY 0x80 #define HX8357D_MADCTL_MX 0x40 #define HX8357D_MADCTL_MV 0x20 #define HX8357D_MADCTL_ML 0x10 #define HX8357D_MADCTL_RGB 0x00 #define HX8357D_MADCTL_BGR 0x08 #define HX8357D_MADCTL_MH 0x04 static int set_var(struct fbtft_par *par) { u8 val; switch (par->info->var.rotate) { case 270: val = HX8357D_MADCTL_MV | HX8357D_MADCTL_MX; break; case 180: val = 0; break; case 90: val = HX8357D_MADCTL_MV | HX8357D_MADCTL_MY; break; default: val = HX8357D_MADCTL_MX | HX8357D_MADCTL_MY; break; } val |= (par->bgr ? HX8357D_MADCTL_RGB : HX8357D_MADCTL_BGR); /* Memory Access Control */ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, val); return 0; } static struct fbtft_display display = { .regwidth = 8, .width = WIDTH, .height = HEIGHT, .gamma_num = 2, .gamma_len = 14, .fbtftops = { .init_display = init_display, .set_addr_win = set_addr_win, .set_var = set_var, }, }; FBTFT_REGISTER_DRIVER(DRVNAME, "himax,hx8357d", &display); MODULE_ALIAS("spi:" DRVNAME); MODULE_ALIAS("platform:" DRVNAME); MODULE_ALIAS("spi:hx8357d"); MODULE_ALIAS("platform:hx8357d"); MODULE_DESCRIPTION("FB driver for the HX8357D LCD Controller"); MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1