| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Ji-Ze Hong (Peter Hong) | 3769 | 81.11% | 19 | 52.78% |
| Greg Kroah-Hartman | 801 | 17.24% | 5 | 13.89% |
| Johan Hovold | 34 | 0.73% | 7 | 19.44% |
| Al Viro | 23 | 0.49% | 1 | 2.78% |
| Jiri Slaby | 12 | 0.26% | 2 | 5.56% |
| Alan Cox | 8 | 0.17% | 2 | 5.56% |
| Total | 4647 | 36 |
// SPDX-License-Identifier: GPL-2.0 /* * Fintek F81232 USB to serial adaptor driver * Fintek F81532A/534A/535/536 USB to 2/4/8/12 serial adaptor driver * * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org) * Copyright (C) 2012 Linux Foundation */ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/slab.h> #include <linux/tty.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h> #include <linux/serial.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/mutex.h> #include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> #include <linux/serial_reg.h> #define F81232_ID \ { USB_DEVICE(0x1934, 0x0706) } /* 1 port UART device */ #define F81534A_SERIES_ID \ { USB_DEVICE(0x2c42, 0x1602) }, /* In-Box 2 port UART device */ \ { USB_DEVICE(0x2c42, 0x1604) }, /* In-Box 4 port UART device */ \ { USB_DEVICE(0x2c42, 0x1605) }, /* In-Box 8 port UART device */ \ { USB_DEVICE(0x2c42, 0x1606) }, /* In-Box 12 port UART device */ \ { USB_DEVICE(0x2c42, 0x1608) }, /* Non-Flash type */ \ { USB_DEVICE(0x2c42, 0x1632) }, /* 2 port UART device */ \ { USB_DEVICE(0x2c42, 0x1634) }, /* 4 port UART device */ \ { USB_DEVICE(0x2c42, 0x1635) }, /* 8 port UART device */ \ { USB_DEVICE(0x2c42, 0x1636) } /* 12 port UART device */ #define F81534A_CTRL_ID \ { USB_DEVICE(0x2c42, 0x16f8) } /* Global control device */ static const struct usb_device_id f81232_id_table[] = { F81232_ID, { } /* Terminating entry */ }; static const struct usb_device_id f81534a_id_table[] = { F81534A_SERIES_ID, { } /* Terminating entry */ }; static const struct usb_device_id f81534a_ctrl_id_table[] = { F81534A_CTRL_ID, { } /* Terminating entry */ }; static const struct usb_device_id combined_id_table[] = { F81232_ID, F81534A_SERIES_ID, F81534A_CTRL_ID, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, combined_id_table); /* Maximum baudrate for F81232 */ #define F81232_MAX_BAUDRATE 1500000 #define F81232_DEF_BAUDRATE 9600 /* USB Control EP parameter */ #define F81232_REGISTER_REQUEST 0xa0 #define F81232_GET_REGISTER 0xc0 #define F81232_SET_REGISTER 0x40 #define F81534A_ACCESS_REG_RETRY 2 #define SERIAL_BASE_ADDRESS 0x0120 #define RECEIVE_BUFFER_REGISTER (0x00 + SERIAL_BASE_ADDRESS) #define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS) #define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS) #define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS) #define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS) #define LINE_STATUS_REGISTER (0x05 + SERIAL_BASE_ADDRESS) #define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS) /* * F81232 Clock registers (106h) * * Bit1-0: Clock source selector * 00: 1.846MHz. * 01: 18.46MHz. * 10: 24MHz. * 11: 14.77MHz. */ #define F81232_CLK_REGISTER 0x106 #define F81232_CLK_1_846_MHZ 0 #define F81232_CLK_18_46_MHZ BIT(0) #define F81232_CLK_24_MHZ BIT(1) #define F81232_CLK_14_77_MHZ (BIT(1) | BIT(0)) #define F81232_CLK_MASK GENMASK(1, 0) #define F81534A_MODE_REG 0x107 #define F81534A_TRIGGER_MASK GENMASK(3, 2) #define F81534A_TRIGGER_MULTIPLE_4X BIT(3) #define F81534A_FIFO_128BYTE (BIT(1) | BIT(0)) /* Serial port self GPIO control, 2bytes [control&output data][input data] */ #define F81534A_GPIO_REG 0x10e #define F81534A_GPIO_MODE2_DIR BIT(6) /* 1: input, 0: output */ #define F81534A_GPIO_MODE1_DIR BIT(5) #define F81534A_GPIO_MODE0_DIR BIT(4) #define F81534A_GPIO_MODE2_OUTPUT BIT(2) #define F81534A_GPIO_MODE1_OUTPUT BIT(1) #define F81534A_GPIO_MODE0_OUTPUT BIT(0) #define F81534A_CTRL_CMD_ENABLE_PORT 0x116 struct f81232_private { struct mutex lock; u8 modem_control; u8 modem_status; u8 shadow_lcr; speed_t baud_base; struct work_struct lsr_work; struct work_struct interrupt_work; struct usb_serial_port *port; }; static u32 const baudrate_table[] = { 115200, 921600, 1152000, 1500000 }; static u8 const clock_table[] = { F81232_CLK_1_846_MHZ, F81232_CLK_14_77_MHZ, F81232_CLK_18_46_MHZ, F81232_CLK_24_MHZ }; static int calc_baud_divisor(speed_t baudrate, speed_t clockrate) { if (!baudrate) return 0; return DIV_ROUND_CLOSEST(clockrate, baudrate); } static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val) { int status; u8 *tmp; struct usb_device *dev = port->serial->dev; tmp = kmalloc(sizeof(*val), GFP_KERNEL); if (!tmp) return -ENOMEM; status = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), F81232_REGISTER_REQUEST, F81232_GET_REGISTER, reg, 0, tmp, sizeof(*val), USB_CTRL_GET_TIMEOUT); if (status != sizeof(*val)) { dev_err(&port->dev, "%s failed status: %d\n", __func__, status); if (status < 0) status = usb_translate_errors(status); else status = -EIO; } else { status = 0; *val = *tmp; } kfree(tmp); return status; } static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val) { int status; u8 *tmp; struct usb_device *dev = port->serial->dev; tmp = kmalloc(sizeof(val), GFP_KERNEL); if (!tmp) return -ENOMEM; *tmp = val; status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), F81232_REGISTER_REQUEST, F81232_SET_REGISTER, reg, 0, tmp, sizeof(val), USB_CTRL_SET_TIMEOUT); if (status != sizeof(val)) { dev_err(&port->dev, "%s failed status: %d\n", __func__, status); if (status < 0) status = usb_translate_errors(status); else status = -EIO; } else { status = 0; } kfree(tmp); return status; } static int f81232_set_mask_register(struct usb_serial_port *port, u16 reg, u8 mask, u8 val) { int status; u8 tmp; status = f81232_get_register(port, reg, &tmp); if (status) return status; tmp = (tmp & ~mask) | (val & mask); return f81232_set_register(port, reg, tmp); } static void f81232_read_msr(struct usb_serial_port *port) { int status; u8 current_msr; struct tty_struct *tty; struct f81232_private *priv = usb_get_serial_port_data(port); mutex_lock(&priv->lock); status = f81232_get_register(port, MODEM_STATUS_REGISTER, ¤t_msr); if (status) { dev_err(&port->dev, "%s fail, status: %d\n", __func__, status); mutex_unlock(&priv->lock); return; } if (!(current_msr & UART_MSR_ANY_DELTA)) { mutex_unlock(&priv->lock); return; } priv->modem_status = current_msr; if (current_msr & UART_MSR_DCTS) port->icount.cts++; if (current_msr & UART_MSR_DDSR) port->icount.dsr++; if (current_msr & UART_MSR_TERI) port->icount.rng++; if (current_msr & UART_MSR_DDCD) { port->icount.dcd++; tty = tty_port_tty_get(&port->port); if (tty) { usb_serial_handle_dcd_change(port, tty, current_msr & UART_MSR_DCD); tty_kref_put(tty); } } wake_up_interruptible(&port->port.delta_msr_wait); mutex_unlock(&priv->lock); } static int f81232_set_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int clear) { u8 val; int status; struct f81232_private *priv = usb_get_serial_port_data(port); if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) return 0; /* no change */ /* 'set' takes precedence over 'clear' */ clear &= ~set; /* force enable interrupt with OUT2 */ mutex_lock(&priv->lock); val = UART_MCR_OUT2 | priv->modem_control; if (clear & TIOCM_DTR) val &= ~UART_MCR_DTR; if (clear & TIOCM_RTS) val &= ~UART_MCR_RTS; if (set & TIOCM_DTR) val |= UART_MCR_DTR; if (set & TIOCM_RTS) val |= UART_MCR_RTS; dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__, val, priv->modem_control); status = f81232_set_register(port, MODEM_CONTROL_REGISTER, val); if (status) { dev_err(&port->dev, "%s set MCR status < 0\n", __func__); mutex_unlock(&priv->lock); return status; } priv->modem_control = val; mutex_unlock(&priv->lock); return 0; } static void f81232_update_line_status(struct usb_serial_port *port, unsigned char *data, size_t actual_length) { struct f81232_private *priv = usb_get_serial_port_data(port); if (!actual_length) return; switch (data[0] & 0x07) { case 0x00: /* msr change */ dev_dbg(&port->dev, "IIR: MSR Change: %02x\n", data[0]); schedule_work(&priv->interrupt_work); break; case 0x02: /* tx-empty */ break; case 0x04: /* rx data available */ break; case 0x06: /* lsr change */ /* we can forget it. the LSR will read from bulk-in */ dev_dbg(&port->dev, "IIR: LSR Change: %02x\n", data[0]); break; } } static void f81232_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; unsigned char *data = urb->transfer_buffer; unsigned int actual_length = urb->actual_length; int status = urb->status; int retval; switch (status) { case 0: /* success */ break; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } usb_serial_debug_data(&port->dev, __func__, urb->actual_length, urb->transfer_buffer); f81232_update_line_status(port, data, actual_length); exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } static char f81232_handle_lsr(struct usb_serial_port *port, u8 lsr) { struct f81232_private *priv = usb_get_serial_port_data(port); char tty_flag = TTY_NORMAL; if (!(lsr & UART_LSR_BRK_ERROR_BITS)) return tty_flag; if (lsr & UART_LSR_BI) { tty_flag = TTY_BREAK; port->icount.brk++; usb_serial_handle_break(port); } else if (lsr & UART_LSR_PE) { tty_flag = TTY_PARITY; port->icount.parity++; } else if (lsr & UART_LSR_FE) { tty_flag = TTY_FRAME; port->icount.frame++; } if (lsr & UART_LSR_OE) { port->icount.overrun++; schedule_work(&priv->lsr_work); tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); } return tty_flag; } static void f81232_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; unsigned char *data = urb->transfer_buffer; char tty_flag; unsigned int i; u8 lsr; /* * When opening the port we get a 1-byte packet with the current LSR, * which we discard. */ if ((urb->actual_length < 2) || (urb->actual_length % 2)) return; /* bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... */ for (i = 0; i < urb->actual_length; i += 2) { lsr = data[i]; tty_flag = f81232_handle_lsr(port, lsr); if (port->sysrq) { if (usb_serial_handle_sysrq_char(port, data[i + 1])) continue; } tty_insert_flip_char(&port->port, data[i + 1], tty_flag); } tty_flip_buffer_push(&port->port); } static void f81534a_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; unsigned char *data = urb->transfer_buffer; char tty_flag; unsigned int i; u8 lsr; u8 len; if (urb->actual_length < 3) { dev_err(&port->dev, "short message received: %d\n", urb->actual_length); return; } len = data[0]; if (len != urb->actual_length) { dev_err(&port->dev, "malformed message received: %d (%d)\n", urb->actual_length, len); return; } /* bulk-in data: [LEN][Data.....][LSR] */ lsr = data[len - 1]; tty_flag = f81232_handle_lsr(port, lsr); if (port->sysrq) { for (i = 1; i < len - 1; ++i) { if (!usb_serial_handle_sysrq_char(port, data[i])) { tty_insert_flip_char(&port->port, data[i], tty_flag); } } } else { tty_insert_flip_string_fixed_flag(&port->port, &data[1], tty_flag, len - 2); } tty_flip_buffer_push(&port->port); } static void f81232_break_ctl(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; struct f81232_private *priv = usb_get_serial_port_data(port); int status; mutex_lock(&priv->lock); if (break_state) priv->shadow_lcr |= UART_LCR_SBC; else priv->shadow_lcr &= ~UART_LCR_SBC; status = f81232_set_register(port, LINE_CONTROL_REGISTER, priv->shadow_lcr); if (status) dev_err(&port->dev, "set break failed: %d\n", status); mutex_unlock(&priv->lock); } static int f81232_find_clk(speed_t baudrate) { int idx; for (idx = 0; idx < ARRAY_SIZE(baudrate_table); ++idx) { if (baudrate <= baudrate_table[idx] && baudrate_table[idx] % baudrate == 0) return idx; } return -EINVAL; } static void f81232_set_baudrate(struct tty_struct *tty, struct usb_serial_port *port, speed_t baudrate, speed_t old_baudrate) { struct f81232_private *priv = usb_get_serial_port_data(port); u8 lcr; int divisor; int status = 0; int i; int idx; speed_t baud_list[] = { baudrate, old_baudrate, F81232_DEF_BAUDRATE }; for (i = 0; i < ARRAY_SIZE(baud_list); ++i) { idx = f81232_find_clk(baud_list[i]); if (idx >= 0) { baudrate = baud_list[i]; tty_encode_baud_rate(tty, baudrate, baudrate); break; } } if (idx < 0) return; priv->baud_base = baudrate_table[idx]; divisor = calc_baud_divisor(baudrate, priv->baud_base); status = f81232_set_mask_register(port, F81232_CLK_REGISTER, F81232_CLK_MASK, clock_table[idx]); if (status) { dev_err(&port->dev, "%s failed to set CLK_REG: %d\n", __func__, status); return; } status = f81232_get_register(port, LINE_CONTROL_REGISTER, &lcr); /* get LCR */ if (status) { dev_err(&port->dev, "%s failed to get LCR: %d\n", __func__, status); return; } status = f81232_set_register(port, LINE_CONTROL_REGISTER, lcr | UART_LCR_DLAB); /* Enable DLAB */ if (status) { dev_err(&port->dev, "%s failed to set DLAB: %d\n", __func__, status); return; } status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER, divisor & 0x00ff); /* low */ if (status) { dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n", __func__, status); goto reapply_lcr; } status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, (divisor & 0xff00) >> 8); /* high */ if (status) { dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n", __func__, status); } reapply_lcr: status = f81232_set_register(port, LINE_CONTROL_REGISTER, lcr & ~UART_LCR_DLAB); if (status) { dev_err(&port->dev, "%s failed to set DLAB: %d\n", __func__, status); } } static int f81232_port_enable(struct usb_serial_port *port) { u8 val; int status; /* fifo on, trigger8, clear TX/RX*/ val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT; status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val); if (status) { dev_err(&port->dev, "%s failed to set FCR: %d\n", __func__, status); return status; } /* MSR Interrupt only, LSR will read from Bulk-in odd byte */ status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, UART_IER_MSI); if (status) { dev_err(&port->dev, "%s failed to set IER: %d\n", __func__, status); return status; } return 0; } static int f81232_port_disable(struct usb_serial_port *port) { int status; status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0); if (status) { dev_err(&port->dev, "%s failed to set IER: %d\n", __func__, status); return status; } return 0; } static void f81232_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct f81232_private *priv = usb_get_serial_port_data(port); u8 new_lcr = 0; int status = 0; speed_t baudrate; speed_t old_baud; /* Don't change anything if nothing has changed */ if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; if (C_BAUD(tty) == B0) f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS); else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0); baudrate = tty_get_baud_rate(tty); if (baudrate > 0) { if (old_termios) old_baud = tty_termios_baud_rate(old_termios); else old_baud = F81232_DEF_BAUDRATE; f81232_set_baudrate(tty, port, baudrate, old_baud); } if (C_PARENB(tty)) { new_lcr |= UART_LCR_PARITY; if (!C_PARODD(tty)) new_lcr |= UART_LCR_EPAR; if (C_CMSPAR(tty)) new_lcr |= UART_LCR_SPAR; } if (C_CSTOPB(tty)) new_lcr |= UART_LCR_STOP; switch (C_CSIZE(tty)) { case CS5: new_lcr |= UART_LCR_WLEN5; break; case CS6: new_lcr |= UART_LCR_WLEN6; break; case CS7: new_lcr |= UART_LCR_WLEN7; break; default: case CS8: new_lcr |= UART_LCR_WLEN8; break; } mutex_lock(&priv->lock); new_lcr |= (priv->shadow_lcr & UART_LCR_SBC); status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr); if (status) { dev_err(&port->dev, "%s failed to set LCR: %d\n", __func__, status); } priv->shadow_lcr = new_lcr; mutex_unlock(&priv->lock); } static int f81232_tiocmget(struct tty_struct *tty) { int r; struct usb_serial_port *port = tty->driver_data; struct f81232_private *port_priv = usb_get_serial_port_data(port); u8 mcr, msr; /* force get current MSR changed state */ f81232_read_msr(port); mutex_lock(&port_priv->lock); mcr = port_priv->modem_control; msr = port_priv->modem_status; mutex_unlock(&port_priv->lock); r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) | (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) | (msr & UART_MSR_CTS ? TIOCM_CTS : 0) | (msr & UART_MSR_DCD ? TIOCM_CAR : 0) | (msr & UART_MSR_RI ? TIOCM_RI : 0) | (msr & UART_MSR_DSR ? TIOCM_DSR : 0); return r; } static int f81232_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; return f81232_set_mctrl(port, set, clear); } static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) { int result; result = f81232_port_enable(port); if (result) return result; /* Setup termios */ if (tty) f81232_set_termios(tty, port, NULL); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed submitting interrupt urb," " error %d\n", __func__, result); return result; } result = usb_serial_generic_open(tty, port); if (result) { usb_kill_urb(port->interrupt_in_urb); return result; } return 0; } static int f81534a_open(struct tty_struct *tty, struct usb_serial_port *port) { int status; u8 mask; u8 val; val = F81534A_TRIGGER_MULTIPLE_4X | F81534A_FIFO_128BYTE; mask = F81534A_TRIGGER_MASK | F81534A_FIFO_128BYTE; status = f81232_set_mask_register(port, F81534A_MODE_REG, mask, val); if (status) { dev_err(&port->dev, "failed to set MODE_REG: %d\n", status); return status; } return f81232_open(tty, port); } static void f81232_close(struct usb_serial_port *port) { struct f81232_private *port_priv = usb_get_serial_port_data(port); f81232_port_disable(port); usb_serial_generic_close(port); usb_kill_urb(port->interrupt_in_urb); flush_work(&port_priv->interrupt_work); flush_work(&port_priv->lsr_work); } static void f81232_dtr_rts(struct usb_serial_port *port, int on) { if (on) f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0); else f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS); } static bool f81232_tx_empty(struct usb_serial_port *port) { int status; u8 tmp; status = f81232_get_register(port, LINE_STATUS_REGISTER, &tmp); if (!status) { if ((tmp & UART_LSR_TEMT) != UART_LSR_TEMT) return false; } return true; } static int f81232_carrier_raised(struct usb_serial_port *port) { u8 msr; struct f81232_private *priv = usb_get_serial_port_data(port); mutex_lock(&priv->lock); msr = priv->modem_status; mutex_unlock(&priv->lock); if (msr & UART_MSR_DCD) return 1; return 0; } static int f81232_get_serial_info(struct tty_struct *tty, struct serial_struct *ss) { struct usb_serial_port *port = tty->driver_data; struct f81232_private *priv = usb_get_serial_port_data(port); ss->type = PORT_16550A; ss->line = port->minor; ss->port = port->port_number; ss->baud_base = priv->baud_base; return 0; } static void f81232_interrupt_work(struct work_struct *work) { struct f81232_private *priv = container_of(work, struct f81232_private, interrupt_work); f81232_read_msr(priv->port); } static void f81232_lsr_worker(struct work_struct *work) { struct f81232_private *priv; struct usb_serial_port *port; int status; u8 tmp; priv = container_of(work, struct f81232_private, lsr_work); port = priv->port; status = f81232_get_register(port, LINE_STATUS_REGISTER, &tmp); if (status) dev_warn(&port->dev, "read LSR failed: %d\n", status); } static int f81534a_ctrl_set_register(struct usb_interface *intf, u16 reg, u16 size, void *val) { struct usb_device *dev = interface_to_usbdev(intf); int retry = F81534A_ACCESS_REG_RETRY; int status; u8 *tmp; tmp = kmemdup(val, size, GFP_KERNEL); if (!tmp) return -ENOMEM; while (retry--) { status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), F81232_REGISTER_REQUEST, F81232_SET_REGISTER, reg, 0, tmp, size, USB_CTRL_SET_TIMEOUT); if (status < 0) { status = usb_translate_errors(status); if (status == -EIO) continue; } else if (status != size) { /* Retry on short transfers */ status = -EIO; continue; } else { status = 0; } break; } if (status) { dev_err(&intf->dev, "failed to set register 0x%x: %d\n", reg, status); } kfree(tmp); return status; } static int f81534a_ctrl_enable_all_ports(struct usb_interface *intf, bool en) { unsigned char enable[2] = {0}; int status; /* * Enable all available serial ports, define as following: * bit 15 : Reset behavior (when HUB got soft reset) * 0: maintain all serial port enabled state. * 1: disable all serial port. * bit 0~11 : Serial port enable bit. */ if (en) { enable[0] = 0xff; enable[1] = 0x8f; } status = f81534a_ctrl_set_register(intf, F81534A_CTRL_CMD_ENABLE_PORT, sizeof(enable), enable); if (status) dev_err(&intf->dev, "failed to enable ports: %d\n", status); return status; } static int f81534a_ctrl_probe(struct usb_interface *intf, const struct usb_device_id *id) { return f81534a_ctrl_enable_all_ports(intf, true); } static void f81534a_ctrl_disconnect(struct usb_interface *intf) { f81534a_ctrl_enable_all_ports(intf, false); } static int f81534a_ctrl_resume(struct usb_interface *intf) { return f81534a_ctrl_enable_all_ports(intf, true); } static int f81232_port_probe(struct usb_serial_port *port) { struct f81232_private *priv; priv = devm_kzalloc(&port->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; mutex_init(&priv->lock); INIT_WORK(&priv->interrupt_work, f81232_interrupt_work); INIT_WORK(&priv->lsr_work, f81232_lsr_worker); usb_set_serial_port_data(port, priv); port->port.drain_delay = 256; priv->port = port; return 0; } static int f81534a_port_probe(struct usb_serial_port *port) { int status; /* tri-state with pull-high, default RS232 Mode */ status = f81232_set_register(port, F81534A_GPIO_REG, F81534A_GPIO_MODE2_DIR); if (status) return status; return f81232_port_probe(port); } static int f81232_suspend(struct usb_serial *serial, pm_message_t message) { struct usb_serial_port *port = serial->port[0]; struct f81232_private *port_priv = usb_get_serial_port_data(port); int i; for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) usb_kill_urb(port->read_urbs[i]); usb_kill_urb(port->interrupt_in_urb); if (port_priv) { flush_work(&port_priv->interrupt_work); flush_work(&port_priv->lsr_work); } return 0; } static int f81232_resume(struct usb_serial *serial) { struct usb_serial_port *port = serial->port[0]; int result; if (tty_port_initialized(&port->port)) { result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); if (result) { dev_err(&port->dev, "submit interrupt urb failed: %d\n", result); return result; } } return usb_serial_generic_resume(serial); } static struct usb_serial_driver f81232_device = { .driver = { .owner = THIS_MODULE, .name = "f81232", }, .id_table = f81232_id_table, .num_ports = 1, .bulk_in_size = 256, .bulk_out_size = 256, .open = f81232_open, .close = f81232_close, .dtr_rts = f81232_dtr_rts, .carrier_raised = f81232_carrier_raised, .get_serial = f81232_get_serial_info, .break_ctl = f81232_break_ctl, .set_termios = f81232_set_termios, .tiocmget = f81232_tiocmget, .tiocmset = f81232_tiocmset, .tiocmiwait = usb_serial_generic_tiocmiwait, .tx_empty = f81232_tx_empty, .process_read_urb = f81232_process_read_urb, .read_int_callback = f81232_read_int_callback, .port_probe = f81232_port_probe, .suspend = f81232_suspend, .resume = f81232_resume, }; static struct usb_serial_driver f81534a_device = { .driver = { .owner = THIS_MODULE, .name = "f81534a", }, .id_table = f81534a_id_table, .num_ports = 1, .open = f81534a_open, .close = f81232_close, .dtr_rts = f81232_dtr_rts, .carrier_raised = f81232_carrier_raised, .get_serial = f81232_get_serial_info, .break_ctl = f81232_break_ctl, .set_termios = f81232_set_termios, .tiocmget = f81232_tiocmget, .tiocmset = f81232_tiocmset, .tiocmiwait = usb_serial_generic_tiocmiwait, .tx_empty = f81232_tx_empty, .process_read_urb = f81534a_process_read_urb, .read_int_callback = f81232_read_int_callback, .port_probe = f81534a_port_probe, .suspend = f81232_suspend, .resume = f81232_resume, }; static struct usb_serial_driver * const serial_drivers[] = { &f81232_device, &f81534a_device, NULL, }; static struct usb_driver f81534a_ctrl_driver = { .name = "f81534a_ctrl", .id_table = f81534a_ctrl_id_table, .probe = f81534a_ctrl_probe, .disconnect = f81534a_ctrl_disconnect, .resume = f81534a_ctrl_resume, }; static int __init f81232_init(void) { int status; status = usb_register_driver(&f81534a_ctrl_driver, THIS_MODULE, KBUILD_MODNAME); if (status) return status; status = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, combined_id_table); if (status) { usb_deregister(&f81534a_ctrl_driver); return status; } return 0; } static void __exit f81232_exit(void) { usb_serial_deregister_drivers(serial_drivers); usb_deregister(&f81534a_ctrl_driver); } module_init(f81232_init); module_exit(f81232_exit); MODULE_DESCRIPTION("Fintek F81232/532A/534A/535/536 USB to serial driver"); MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>"); MODULE_AUTHOR("Peter Hong <peter_hong@fintek.com.tw>"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1