// SPDX-License-Identifier: GPL-2.0-only /* * arch/arm/mach-orion5x/rd88f5182-setup.c * * Marvell Orion-NAS Reference Design Setup * * Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/pci.h> #include <linux/irq.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include "common.h" #include "orion5x.h" /***************************************************************************** * RD-88F5182 Info ****************************************************************************/ /* * PCI */ #define RD88F5182_PCI_SLOT0_OFFS 7 #define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7 #define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6 /***************************************************************************** * PCI ****************************************************************************/ static void __init rd88f5182_pci_preinit(void) { int pin; /* * Configure PCI GPIO IRQ pins */ pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; if (gpio_request(pin, "PCI IntA") == 0) { if (gpio_direction_input(pin) == 0) { irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "rd88f5182_pci_preinit failed to " "set_irq_type pin %d\n", pin); gpio_free(pin); } } else { printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin); } pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; if (gpio_request(pin, "PCI IntB") == 0) { if (gpio_direction_input(pin) == 0) { irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "rd88f5182_pci_preinit failed to " "set_irq_type pin %d\n", pin); gpio_free(pin); } } else { printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin); } } static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; /* * Check for devices with hard-wired IRQs. */ irq = orion5x_pci_map_irq(dev, slot, pin); if (irq != -1) return irq; /* * PCI IRQs are connected via GPIOs */ switch (slot - RD88F5182_PCI_SLOT0_OFFS) { case 0: if (pin == 1) return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN); else return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN); default: return -1; } } static struct hw_pci rd88f5182_pci __initdata = { .nr_controllers = 2, .preinit = rd88f5182_pci_preinit, .setup = orion5x_pci_sys_setup, .scan = orion5x_pci_sys_scan_bus, .map_irq = rd88f5182_pci_map_irq, }; static int __init rd88f5182_pci_init(void) { if (of_machine_is_compatible("marvell,rd-88f5182-nas")) pci_common_init(&rd88f5182_pci); return 0; } subsys_initcall(rd88f5182_pci_init);